[U-Boot] [PATCH 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin

[Simon Glass]

Hi Hans,

On 28 January 2016 at 01:25, Hans de Goede <hdegoede at redhat.com> wrote:
> Hi,
>
> On 28-01-16 04:58, Simon Glass wrote:
>>
>> Hi Hans,
>>
>> On 25 January 2016 at 13:30, Simon Glass <sjg at chromium.org> wrote:
>>>
>>>
>>> At present u-boot.bin holds the plain U-Boot binary without the device
>>> tree.
>>> This is somewhat annoying since you need either u-boot.bin or
>>> u-boot-dtb.bin
>>> depending on whether device tree is used.
>>>
>>> This series adjusts the build such that u-boot.bin includes a device
>>> tree,
>>> and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin
>>> remains
>>> the same.
>>>
>>> This should be acceptable since:
>>>
>>> - without OF_CONTROL, u-boot.bin still does not include a device tree
>>> - with OF_CONTROL, u-boot-dtb.bin does not change
>>>
>>> The main impact is build systems which are set up to use u-boot.bin as
>>> the output file and then add a device tree. These will have to change to
>>> use
>>> u-boot-nodtb.bin instead.
>>>
>>> The original decision to use a separate u-boot-dtb.bin was aimed at
>>> allowing
>>> any device tree file to be concatenated to the u-boot.bin image after the
>>> build. However this no-longer seems so important. More important is the
>>> convenience of using the same output file regardless of the setting for
>>> OF_CONTROL.
>>
>>
>> Do you have any comments on this series please?
>
>
> I'm fine with this series, all normal sunxi use-cases use
> u-boot-sunxi-with-spl.bin
> which is generated like this:
>
> ifneq ($(CONFIG_SUNXI),)
> OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
>                                    --pad-to=$(CONFIG_SPL_PAD_TO)
> --gap-fill=0xff
> u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
>                         u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
>         $(call if_changed,pad_cat)
> endif
>
> Which should stay working just fine, although it might be slightly
> simplified after your patch to simply always use u-boot.img.
>
> sunxi spl does not use a dtb, so nothing should change there.

OK thanks. I'll respin the series with the comments address and send v2.

Regards,
Simon