[U-Boot] [PATCH 10/11] Drop the MAKEALL tool
Simon Glass
sjg at chromium.org
Sun Jul 3 23:14:26 CEST 2016
Buildman has been around for 3 years now. It has had a lot of use and
testing. Perhaps it is time to remove MAKEALL.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
MAKEALL | 850 ----------------------------------------------------------------
1 file changed, 850 deletions(-)
delete mode 100755 MAKEALL
diff --git a/MAKEALL b/MAKEALL
deleted file mode 100755
index 7e42f10..0000000
--- a/MAKEALL
+++ /dev/null
@@ -1,850 +0,0 @@
-#!/bin/bash
-# Tool mainly for U-Boot Quality Assurance: build one or more board
-# configurations with minimal verbosity, showing only warnings and
-# errors.
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-usage()
-{
- # if exiting with 0, write to stdout, else write to stderr
- local ret=${1:-0}
- [ "${ret}" -eq 1 ] && exec 1>&2
- cat <<-EOF
- Usage: MAKEALL [options] [--] [boards-to-build]
-
- Options:
- -a ARCH, --arch ARCH Build all boards with arch ARCH
- -c CPU, --cpu CPU Build all boards with cpu CPU
- -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR
- -s SOC, --soc SOC Build all boards with soc SOC
- -b BOARD, --board BOARD Build all boards with board name BOARD
- -l, --list List all targets to be built
- -m, --maintainers List all targets and maintainer email
- -M, --mails List all targets and all affilated emails
- -C, --check Enable build checking
- -n, --continue Continue (skip boards already built)
- -r, --rebuild-errors Rebuild any boards that errored
- -h, --help This help output
-
- Selections by these options are logically ANDed; if the same option
- is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
- will select all configurations where the vendor is either FOO or
- BAR. Any additional arguments specified on the command line are
- always build additionally. See the boards.cfg file for more info.
-
- If no boards are specified, then the default is "powerpc".
-
- Environment variables:
- BUILD_NCPUS number of parallel make jobs (default: auto)
- CROSS_COMPILE cross-compiler toolchain prefix (default: "")
- CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
- architecture "ARCH". Substitute "ARCH" for any
- supported architecture (default: "")
- MAKEALL_LOGDIR output all logs to here (default: ./LOG/)
- BUILD_DIR output build directory (default: ./)
- BUILD_NBUILDS number of parallel targets (default: 1)
-
- Examples:
- - build all Power Architecture boards:
- MAKEALL -a powerpc
- MAKEALL --arch powerpc
- MAKEALL powerpc
- - build all PowerPC boards manufactured by vendor "esd":
- MAKEALL -a powerpc -v esd
- - build all PowerPC boards manufactured either by "keymile" or "siemens":
- MAKEALL -a powerpc -v keymile -v siemens
- - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
- MAKEALL -c mpc83xx -v freescale 4xx
- EOF
- exit ${ret}
-}
-
-deprecation() {
- echo "** Note: MAKEALL is deprecated - please use buildman instead"
- echo "** See tools/buildman/README for details"
- echo
-}
-
-deprecation
-
-SHORT_OPTS="ha:c:v:s:b:lmMCnr"
-LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
-
-# Option processing based on util-linux-2.13/getopt-parse.bash
-
-# Note that we use `"$@"' to let each command-line parameter expand to a
-# separate word. The quotes around `$@' are essential!
-# We need TEMP as the `eval set --' would nuke the return value of
-# getopt.
-TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
- -n 'MAKEALL' -- "$@"`
-
-[ $? != 0 ] && usage 1
-
-# Note the quotes around `$TEMP': they are essential!
-eval set -- "$TEMP"
-
-SELECTED=''
-ONLY_LIST=''
-PRINT_MAINTS=''
-MAINTAINERS_ONLY=''
-CONTINUE=''
-REBUILD_ERRORS=''
-
-while true ; do
- case "$1" in
- -a|--arch)
- # echo "Option ARCH: argument \`$2'"
- if [ "$opt_a" ] ; then
- opt_a="${opt_a%)} || \$2 == \"$2\")"
- else
- opt_a="(\$2 == \"$2\")"
- fi
- SELECTED='y'
- shift 2 ;;
- -c|--cpu)
- # echo "Option CPU: argument \`$2'"
- if [ "$opt_c" ] ; then
- opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
- else
- opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
- fi
- SELECTED='y'
- shift 2 ;;
- -s|--soc)
- # echo "Option SoC: argument \`$2'"
- if [ "$opt_s" ] ; then
- opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
- else
- opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
- fi
- SELECTED='y'
- shift 2 ;;
- -v|--vendor)
- # echo "Option VENDOR: argument \`$2'"
- if [ "$opt_v" ] ; then
- opt_v="${opt_v%)} || \$5 == \"$2\")"
- else
- opt_v="(\$5 == \"$2\")"
- fi
- SELECTED='y'
- shift 2 ;;
- -b|--board)
- # echo "Option BOARD: argument \`$2'"
- if [ "$opt_b" ] ; then
- opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
- else
- # We need to check the 7th field too
- # for boards whose 6th field is "-"
- opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
- fi
- SELECTED='y'
- shift 2 ;;
- -C|--check)
- CHECK='C=1'
- shift ;;
- -n|--continue)
- CONTINUE='y'
- shift ;;
- -r|--rebuild-errors)
- REBUILD_ERRORS='y'
- shift ;;
- -l|--list)
- ONLY_LIST='y'
- shift ;;
- -m|--maintainers)
- ONLY_LIST='y'
- PRINT_MAINTS='y'
- MAINTAINERS_ONLY='y'
- shift ;;
- -M|--mails)
- ONLY_LIST='y'
- PRINT_MAINTS='y'
- shift ;;
- -h|--help)
- usage ;;
- --)
- shift ; break ;;
- *)
- echo "Internal error!" >&2 ; exit 1 ;;
- esac
-done
-
-GNU_MAKE=$(scripts/show-gnu-make) || {
- echo "GNU Make not found" >&2
- exit 1
-}
-
-# echo "Remaining arguments:"
-# for arg do echo '--> '"\`$arg'" ; done
-
-tools/genboardscfg.py || {
- echo "Failed to generate boards.cfg" >&2
- exit 1
-}
-
-FILTER="\$1 !~ /^#/"
-[ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
-[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
-[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
-[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
-[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
-
-if [ "$SELECTED" ] ; then
- SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
-
- # Make sure some boards from boards.cfg are actually found
- if [ -z "$SELECTED" ] ; then
- echo "Error: No boards selected, invalid arguments"
- exit 1
- fi
-fi
-
-#########################################################################
-
-# Print statistics when we exit
-trap exit 1 2 3 15
-trap print_stats 0
-
-# Determine number of CPU cores if no default was set
-: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
-
-if [ "$BUILD_NCPUS" -gt 1 ]
-then
- JOBS="-j $((BUILD_NCPUS + 1))"
-else
- JOBS=""
-fi
-
-if [ "${MAKEALL_LOGDIR}" ] ; then
- LOG_DIR=${MAKEALL_LOGDIR}
-else
- LOG_DIR="LOG"
-fi
-
-: ${BUILD_NBUILDS:=1}
-BUILD_MANY=0
-
-if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
- BUILD_MANY=1
- : ${BUILD_DIR:=./build}
- mkdir -p "${BUILD_DIR}/ERR"
- find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
-fi
-
-: ${BUILD_DIR:=.}
-
-OUTPUT_PREFIX="${BUILD_DIR}"
-
-[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
-if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
- find "${LOG_DIR}/" -type f -exec rm -f {} +
-fi
-
-LIST=""
-
-# Keep track of the number of builds and errors
-ERR_CNT=0
-ERR_LIST=""
-WRN_CNT=0
-WRN_LIST=""
-TOTAL_CNT=0
-SKIP_CNT=0
-CURRENT_CNT=0
-OLDEST_IDX=1
-RC=0
-
-# Helper funcs for parsing boards.cfg
-targets_by_field()
-{
- field=$1
- regexp=$2
-
- awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
- boards.cfg
-}
-
-targets_by_arch() { targets_by_field 2 "$@" ; }
-targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
-targets_by_soc() { targets_by_field 4 "$@" ; }
-
-#########################################################################
-## MPC5xx Systems
-#########################################################################
-
-LIST_5xx="$(targets_by_cpu mpc5xx)"
-
-#########################################################################
-## MPC5xxx Systems
-#########################################################################
-
-LIST_5xxx="$(targets_by_cpu mpc5xxx)"
-
-#########################################################################
-## MPC512x Systems
-#########################################################################
-
-LIST_512x="$(targets_by_cpu mpc512x)"
-
-#########################################################################
-## MPC8xx Systems
-#########################################################################
-
-LIST_8xx="$(targets_by_cpu mpc8xx)"
-
-#########################################################################
-## PPC4xx Systems
-#########################################################################
-
-LIST_4xx="$(targets_by_cpu ppc4xx)"
-
-#########################################################################
-## MPC8260 Systems (includes 8250, 8255 etc.)
-#########################################################################
-
-LIST_8260="$(targets_by_cpu mpc8260)"
-
-#########################################################################
-## MPC83xx Systems (includes 8349, etc.)
-#########################################################################
-
-LIST_83xx="$(targets_by_cpu mpc83xx)"
-
-#########################################################################
-## MPC85xx Systems (includes 8540, 8560 etc.)
-#########################################################################
-
-LIST_85xx="$(targets_by_cpu mpc85xx)"
-
-#########################################################################
-## MPC86xx Systems
-#########################################################################
-
-LIST_86xx="$(targets_by_cpu mpc86xx)"
-
-#########################################################################
-## PowerPC groups
-#########################################################################
-
-LIST_TSEC=" \
- ${LIST_83xx} \
- ${LIST_85xx} \
- ${LIST_86xx} \
-"
-
-LIST_powerpc=" \
- ${LIST_5xx} \
- ${LIST_512x} \
- ${LIST_5xxx} \
- ${LIST_8xx} \
- ${LIST_824x} \
- ${LIST_8260} \
- ${LIST_83xx} \
- ${LIST_85xx} \
- ${LIST_86xx} \
- ${LIST_4xx} \
-"
-
-# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
-# still using "ppc" instead of "powerpc"
-LIST_ppc=" \
- ${LIST_powerpc} \
-"
-
-#########################################################################
-## StrongARM Systems
-#########################################################################
-
-LIST_SA="$(targets_by_cpu sa1100)"
-
-#########################################################################
-## ARM7 Systems
-#########################################################################
-
-LIST_ARM7="$(targets_by_cpu arm720t)"
-
-#########################################################################
-## ARM9 Systems
-#########################################################################
-
-LIST_ARM9="$(targets_by_cpu arm920t) \
- $(targets_by_cpu arm926ejs) \
- $(targets_by_cpu arm946es) \
-"
-
-#########################################################################
-## ARM11 Systems
-#########################################################################
-LIST_ARM11="$(targets_by_cpu arm1136) \
- $(targets_by_cpu arm1176) \
-"
-
-#########################################################################
-## ARMV7 Systems
-#########################################################################
-
-LIST_ARMV7="$(targets_by_cpu armv7)"
-
-#########################################################################
-## ARMV8 Systems
-#########################################################################
-
-LIST_ARMV8="$(targets_by_cpu armv8)"
-
-#########################################################################
-## AT91 Systems
-#########################################################################
-
-LIST_at91="$(targets_by_soc at91)"
-
-#########################################################################
-## Xscale Systems
-#########################################################################
-
-LIST_pxa="$(targets_by_cpu pxa)"
-
-#########################################################################
-## SPEAr Systems
-#########################################################################
-
-LIST_spear="$(targets_by_soc spear)"
-
-#########################################################################
-## ARM groups
-#########################################################################
-
-LIST_arm="$(targets_by_arch arm | \
- for ARMV8_TARGET in $LIST_ARMV8; \
- do sed "/$ARMV8_TARGET/d"; \
- done) \
-"
-
-#########################################################################
-## MIPS Systems (default = big endian)
-#########################################################################
-
-LIST_mips="$(targets_by_arch mips)"
-
-#########################################################################
-## OpenRISC Systems
-#########################################################################
-
-LIST_openrisc="$(targets_by_arch openrisc)"
-
-#########################################################################
-## x86 Systems
-#########################################################################
-
-LIST_x86="$(targets_by_arch x86)"
-
-#########################################################################
-## Nios-II Systems
-#########################################################################
-
-LIST_nios2="$(targets_by_arch nios2)"
-
-#########################################################################
-## MicroBlaze Systems
-#########################################################################
-
-LIST_microblaze="$(targets_by_arch microblaze)"
-
-#########################################################################
-## ColdFire Systems
-#########################################################################
-
-LIST_m68k="$(targets_by_arch m68k)"
-LIST_coldfire=${LIST_m68k}
-
-#########################################################################
-## AVR32 Systems
-#########################################################################
-
-LIST_avr32="$(targets_by_arch avr32)"
-
-#########################################################################
-## Blackfin Systems
-#########################################################################
-
-LIST_blackfin="$(targets_by_arch blackfin)"
-
-#########################################################################
-## SH Systems
-#########################################################################
-
-LIST_sh2="$(targets_by_cpu sh2)"
-LIST_sh3="$(targets_by_cpu sh3)"
-LIST_sh4="$(targets_by_cpu sh4)"
-
-LIST_sh="$(targets_by_arch sh)"
-
-#########################################################################
-## SPARC Systems
-#########################################################################
-
-LIST_sparc="$(targets_by_arch sparc)"
-
-#########################################################################
-## NDS32 Systems
-#########################################################################
-
-LIST_nds32="$(targets_by_arch nds32)"
-
-#########################################################################
-## ARC Systems
-#########################################################################
-
-LIST_arc="$(targets_by_arch arc)"
-
-#-----------------------------------------------------------------------
-
-get_target_location() {
- local target=$1
- local BOARD_NAME=""
- local CONFIG_NAME=""
- local board=""
- local vendor=""
-
- # Automatic mode
- local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
- if [ -z "${line}" ] ; then echo "" ; return ; fi
-
- set ${line}
-
- CONFIG_NAME="${7%_defconfig}"
-
- [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}"
-
- if [ $# -gt 5 ]; then
- if [ "$6" = "-" ] ; then
- board=${BOARD_NAME}
- else
- board="$6"
- fi
- fi
-
- [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
- [ $# -gt 6 ] && [ "$8" != "-" ] && {
- tmp="${8%:*}"
- if [ "$tmp" ] ; then
- CONFIG_NAME="$tmp"
- fi
- }
-
- # Assign board directory to BOARDIR variable
- if [ "${vendor}" == "-" ] ; then
- BOARDDIR=${board}
- else
- BOARDDIR=${vendor}/${board}
- fi
-
- echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
-}
-
-get_target_maintainers() {
- local name=`echo $1 | cut -d : -f 3`
-
- local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
- if [ -z "${line}" ]; then
- echo ""
- return ;
- fi
-
- local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
- [ "$mails" == "-" ] && mails=""
- echo "$mails"
-}
-
-get_target_arch() {
- local target=$1
-
- awk '$7 == "'$target'" { print $2 }' boards.cfg
-}
-
-list_target() {
- if [ "$PRINT_MAINTS" != 'y' ] ; then
- echo "$1"
- return
- fi
-
- echo -n "$1:"
-
- local loc=`get_target_location $1`
-
- if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
-
- local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
-
- if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
-
- local dir=`echo ${loc} | cut -d ":" -f 2`
- local cfg=`echo ${loc} | cut -d ":" -f 1`
- local git_result=`git log --format=%aE board/${dir} \
- include/configs/${cfg}.h | grep "@"`
- local git_result_recent=`echo ${git_result} | tr " " "\n" | \
- head -n 3`
- local git_result_top=`echo ${git_result} | tr " " "\n" | \
- sort | uniq -c | sort -nr | head -n 3 | \
- sed "s/^ \+[0-9]\+ \+//"`
-
- echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
- sort -u | tr "\n" " " | sed "s/ $//" ;
- else
- echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
- sed "s/ $//" ;
- fi
-
- echo ""
-}
-
-# Each finished build will have a file called ${donep}${n},
-# where n is the index of the build. Each build
-# we've already noted as finished will have ${skipp}${n}.
-# The code managing the build process will use this information
-# to ensure that only BUILD_NBUILDS builds are in flight at once
-donep="${LOG_DIR}/._done_"
-skipp="${LOG_DIR}/._skip_"
-
-build_target_killed() {
- echo "Aborted $target build."
- # Remove the logs for this board since it was aborted
- rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
- exit
-}
-
-build_target() {
- target=$1
- build_idx=$2
-
- if [ "$ONLY_LIST" == 'y' ] ; then
- list_target ${target}
- return
- fi
-
- if [ $BUILD_MANY == 1 ] ; then
- output_dir="${OUTPUT_PREFIX}/${target}"
- mkdir -p "${output_dir}"
- trap build_target_killed TERM
- else
- output_dir="${OUTPUT_PREFIX}"
- fi
-
- target_arch=$(get_target_arch ${target})
- eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
- if [ "${cross_toolchain}" ] ; then
- MAKE="$GNU_MAKE CROSS_COMPILE=${cross_toolchain}"
- elif [ "${CROSS_COMPILE}" ] ; then
- MAKE="$GNU_MAKE CROSS_COMPILE=${CROSS_COMPILE}"
- else
- MAKE=$GNU_MAKE
- fi
-
- if [ "${output_dir}" != "." ] ; then
- MAKE="${MAKE} O=${output_dir}"
- fi
-
- ${MAKE} mrproper >/dev/null
-
- echo "Building ${target} board..."
- ${MAKE} -s ${target}_defconfig >/dev/null
-
- ${MAKE} ${JOBS} ${CHECK} all \
- >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
-
- # Check for 'make' errors
- if [ ${PIPESTATUS[0]} -ne 0 ] ; then
- RC=1
- fi
-
- OBJS=${output_dir}/u-boot
- if [ -e ${output_dir}/spl/u-boot-spl ]; then
- OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
- fi
-
- ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
-
- if [ $BUILD_MANY == 1 ] ; then
- trap - TERM
-
- ${MAKE} -s clean
-
- if [ -s ${LOG_DIR}/${target}.ERR ] ; then
- cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
- else
- rm ${LOG_DIR}/${target}.ERR
- fi
- else
- if [ -s ${LOG_DIR}/${target}.ERR ] ; then
- if grep -iw error ${LOG_DIR}/${target}.ERR ; then
- : $(( ERR_CNT += 1 ))
- ERR_LIST="${ERR_LIST} $target"
- else
- : $(( WRN_CNT += 1 ))
- WRN_LIST="${WRN_LIST} $target"
- fi
- else
- rm ${LOG_DIR}/${target}.ERR
- fi
- fi
-
- [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
-
- touch "${donep}${build_idx}"
-}
-
-manage_builds() {
- search_idx=${OLDEST_IDX}
- if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
-
- while true; do
- if [ -e "${donep}${search_idx}" ] ; then
- : $(( CURRENT_CNT-- ))
- [ ${OLDEST_IDX} -eq ${search_idx} ] &&
- : $(( OLDEST_IDX++ ))
-
- # Only want to count it once
- rm -f "${donep}${search_idx}"
- touch "${skipp}${search_idx}"
- elif [ -e "${skipp}${search_idx}" ] ; then
- [ ${OLDEST_IDX} -eq ${search_idx} ] &&
- : $(( OLDEST_IDX++ ))
- fi
- : $(( search_idx++ ))
- if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
- if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
- search_idx=${OLDEST_IDX}
- sleep 1
- else
- break
- fi
- fi
- done
-}
-
-build_targets() {
- for t in "$@" ; do
- # If a LIST_xxx var exists, use it. But avoid variable
- # expansion in the eval when a board name contains certain
- # characters that the shell interprets.
- case ${t} in
- *[-+=]*) list= ;;
- *) list=$(eval echo '${LIST_'$t'}') ;;
- esac
- if [ -n "${list}" ] ; then
- build_targets ${list}
- else
- : $((TOTAL_CNT += 1))
- : $((CURRENT_CNT += 1))
- rm -f "${donep}${TOTAL_CNT}"
- rm -f "${skipp}${TOTAL_CNT}"
- if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
- : $((SKIP_CNT += 1))
- touch "${donep}${TOTAL_CNT}"
- elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
- : $((SKIP_CNT += 1))
- touch "${donep}${TOTAL_CNT}"
- else
- if [ $BUILD_MANY == 1 ] ; then
- build_target ${t} ${TOTAL_CNT} &
- else
- CUR_TGT="${t}"
- build_target ${t} ${TOTAL_CNT}
- CUR_TGT=''
- fi
- fi
- fi
-
- # We maintain a running count of all the builds we have done.
- # Each finished build will have a file called ${donep}${n},
- # where n is the index of the build. Each build
- # we've already noted as finished will have ${skipp}${n}.
- # We track the current index via TOTAL_CNT, and the oldest
- # index. When we exceed the maximum number of parallel builds,
- # We look from oldest to current for builds that have completed,
- # and update the current count and oldest index as appropriate.
- # If we've gone through the entire list, wait a second, and
- # reprocess the entire list until we find a build that has
- # completed
- if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
- manage_builds
- fi
- done
-}
-
-#-----------------------------------------------------------------------
-
-kill_children() {
- local OS=$(uname -s)
- local children=""
- case "${OS}" in
- "Darwin")
- # Mac OS X is known to have BSD style ps
- local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
- children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
- ;;
- *)
- # everything else tries the GNU style
- local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
- children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
- ;;
- esac
-
- kill $children 2> /dev/null
- wait $children 2> /dev/null
-
- exit
-}
-
-print_stats() {
- if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
-
- # Only count boards that completed
- : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
-
- rm -f ${donep}* ${skipp}*
-
- if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
- ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
- ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
- ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
- WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
- WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
- WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
- else
- # Remove the logs for any board that was interrupted
- rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
- fi
-
- : $((TOTAL_CNT -= ${SKIP_CNT}))
- echo ""
- echo "--------------------- SUMMARY ----------------------------"
- if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
- echo "Boards skipped: ${SKIP_CNT}"
- fi
- echo "Boards compiled: ${TOTAL_CNT}"
- if [ ${ERR_CNT} -gt 0 ] ; then
- echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
- fi
- if [ ${WRN_CNT} -gt 0 ] ; then
- echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
- fi
- echo "----------------------------------------------------------"
-
- if [ $BUILD_MANY == 1 ] ; then
- kill_children
- fi
-
- deprecation
-
- exit $RC
-}
-
-#-----------------------------------------------------------------------
-
-# Build target groups selected by options, plus any command line args
-set -- ${SELECTED} "$@"
-# run PowerPC by default
-[ $# = 0 ] && set -- powerpc
-build_targets "$@"
-wait
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list