July 2016 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Jul 1 00:35:07 CEST 2016
Ending: Sun Jul 31 23:58:15 CEST 2016
Messages: 2970

• [U-Boot] UBIFS status in the mainline   Stefan Agner
• [U-Boot] [PATCH 0/9] mx7: add Colibri iMX7S/iMX7D support   Stefan Agner
• [U-Boot] [PATCH 1/9] dm: imx: serial: Support DTE mode when using driver model   Stefan Agner
• [U-Boot] [PATCH 2/9] usb: ehci-mx6: configure power polarity in usb_power_config   Stefan Agner
• [U-Boot] [PATCH 3/9] usb: ehci-mx6: introduce config for high active power pin   Stefan Agner
• [U-Boot] [PATCH 4/9] mx7: set soc environment according to exact SoC type   Stefan Agner
• [U-Boot] [PATCH 5/9] mx7_common: Put display board info config into board file   Stefan Agner
• [U-Boot] [PATCH 6/9] mx7_common: use Kconfig for ARMv7 non-secure mode   Stefan Agner
• [U-Boot] [PATCH 7/9] imx_watchdog: add weak attribute to reset_cpu function   Stefan Agner
• [U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support   Stefan Agner
• [U-Boot] [PATCH 9/9] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefan Agner
• [U-Boot] [PATCH 2/9] usb: ehci-mx6: configure power polarity in usb_power_config   Stefan Agner
• [U-Boot] [PATCH 3/9] usb: ehci-mx6: introduce config for high active power pin   Stefan Agner
• [U-Boot] [PATCH 4/9] mx7: set soc environment according to exact SoC type   Stefan Agner
• [U-Boot] UBIFS status in the mainline   Stefan Agner
• [U-Boot] [PATCH 4/9] mx7: set soc environment according to exact SoC type   Stefan Agner
• [U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support   Stefan Agner
• [U-Boot] [PATCH v2 0/9] mx7: add Colibri iMX7S/iMX7D support   Stefan Agner
• [U-Boot] [PATCH v2 1/9] dm: imx: serial: Support DTE mode when using driver model   Stefan Agner
• [U-Boot] [PATCH v2 2/9] usb: move CONFIG_USB_EHCI_MX7 to Kconfig   Stefan Agner
• [U-Boot] [PATCH v2 3/9] usb: ehci-mx6: configure power polarity in usb_power_config   Stefan Agner
• [U-Boot] [PATCH v2 4/9] usb: ehci-mx6: introduce config for high active power pin   Stefan Agner
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Stefan Agner
• [U-Boot] [PATCH v2 6/9] mx7_common: Put display board info config into board file   Stefan Agner
• [U-Boot] [PATCH v2 7/9] mx7_common: use Kconfig for ARMv7 non-secure mode   Stefan Agner
• [U-Boot] [PATCH v2 8/9] imx_watchdog: add weak attribute to reset_cpu function   Stefan Agner
• [U-Boot] [PATCH v2 9/9] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefan Agner
• [U-Boot] [PATCH v2 4/9] usb: ehci-mx6: introduce config for high active power pin   Stefan Agner
• [U-Boot] [PATCH 1/2] tools/env: complete environment device config early   Stefan Agner
• [U-Boot] [PATCH 2/2] tools/env: allow negative offsets   Stefan Agner
• [U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support   Stefan Agner
• [U-Boot] [PATCH 2/2] tools/env: allow negative offsets   Stefan Agner
• [U-Boot] [PATCH v2 0/9] mx7: add Colibri iMX7S/iMX7D support   Stefan Agner
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Stefan Agner
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Stefan Agner
• [U-Boot] [PATCH v2 9/9] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefan Agner
• [U-Boot] [PATCH v2 0/9] mx7: add Colibri iMX7S/iMX7D support   Stefan Agner
• [U-Boot] [PATCH] serial_mxc: Remove unconditional DCE setting   Stefan Agner
• [U-Boot] [PATCH v3] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefan Agner
• [U-Boot] [PATCH] mx7: Allow selection of secure or non-secure mode   Stefan Agner
• [U-Boot] [PATCH] mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT   Stefan Agner
• [U-Boot] [PATCH v3] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefan Agner
• [U-Boot] [PATCH] mx7_common: initialize generic timer on all CPU's   Stefan Agner
• [U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D   Stefan Agner
• [U-Boot] [PATCH 01/10] dm: imx: serial: support device tree   Stefan Agner
• [U-Boot] [PATCH 02/10] pinctrl: imx: do not announce driver initialization   Stefan Agner
• [U-Boot] [PATCH 03/10] arm: dts: imx7: add pinctrl defines   Stefan Agner
• [U-Boot] [PATCH 04/10] arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree   Stefan Agner
• [U-Boot] [PATCH 05/10] colibri_imx7: remove legancy I2C support   Stefan Agner
• [U-Boot] [PATCH 06/10] colibri_imx7: remove legancy UART platform data   Stefan Agner
• [U-Boot] [PATCH 07/10] power: pmic: add Ricoh RN5T567 PMIC support   Stefan Agner
• [U-Boot] [PATCH 08/10] arm: dts: imx7: add Ricoh RN5T567 PMIC node   Stefan Agner
• [U-Boot] [PATCH 09/10] colibri_imx7: use Ricoh RN5T567 to reboot the board   Stefan Agner
• [U-Boot] [PATCH 10/10] configs: enable device tree for Colibri iMX7   Stefan Agner
• [U-Boot] [PATCH] mx7_common: initialize generic timer on all CPU's   Stefan Agner
• [U-Boot] [PATCH 1/2] mpc83xx: fix the corruption of u-boot when saveenv   Sinan Akman
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Doug Anderson
• [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works   Stephen Arnold
• [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works   Steve Arnold
• [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works   Steve Arnold
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   B, Ravi
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   B, Ravi
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   B, Ravi
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   B, Ravi
• [U-Boot] [RFC PATCH v2 3/5] spl: dfu: adding dfu support functions for SPL-DFU   B, Ravi
• [U-Boot] [RFC PATCH v2 2/5] common: dfu: saperate the dfu common functionality   B, Ravi
• [U-Boot] [RFC PATCH v2 4/5] dra7x: boot: add dfu bootmode support   B, Ravi
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   B, Ravi
• [U-Boot] [RFC PATCH v2 4/5] dra7x: boot: add dfu bootmode support   B, Ravi
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   B, Ravi
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   B, Ravi
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   B, Ravi
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   B, Ravi
• [U-Boot] [RFC PATCH v2 1/5] spl: dfu: add dfu support in SPL   B, Ravi
• [U-Boot] [RFC PATCH v2 1/5] spl: dfu: add dfu support in SPL   B, Ravi
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   B, Ravi
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   B, Ravi
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   B, Ravi
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   B, Ravi
• [U-Boot] [PATCH 00/14] mkimage: Tidy up error handling   Stefano Babic
• [U-Boot] [PATCH 00/14] mkimage: Tidy up error handling   Stefano Babic
• [U-Boot] [PATCH] pico-imx6ul: Add USB Host support   Stefano Babic
• [U-Boot] [PATCH for v2016.07] mkimage -l is broken for images after gpimage   Stefano Babic
• [U-Boot] [PATCH] driver/net/fec: support fixed speed connection   Stefano Babic
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Stefano Babic
• [U-Boot] [PATCH] imx6: clock: typo fix   Stefano Babic
• [U-Boot] [PATCH 1/2] imx: kconfig: introduce IMX_FIXED_IVT_OFFSET   Stefano Babic
• [U-Boot] [PATCH 0/5] imx: ventana: stability fixes   Stefano Babic
• [U-Boot] [PATCH v2 4/4] ARM: configs: cm_fx6: add mtd support   Stefano Babic
• [U-Boot] imx: mx6var_som: Add support for Variscite mx6 boards   Stefano Babic
• [U-Boot] [PATCH] mx6: support i.MX6UL speed grading reading from OTP bits   Stefano Babic
• [U-Boot] [PATCH v3] nitrogen6x : Use generic distro configuration   Stefano Babic
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Stefano Babic
• [U-Boot] [PATCH v2] pico-imx6ul: Add PMIC support   Stefano Babic
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Stefano Babic
• [U-Boot] [PATCH v2 9/9] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefano Babic
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Stefano Babic
• [U-Boot] [PATCH v2 9/9] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefano Babic
• [U-Boot] [PATCH v2 0/9] mx7: add Colibri iMX7S/iMX7D support   Stefano Babic
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Stefano Babic
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Stefano Babic
• [U-Boot] [PATCH] Fix build for mx7dsabresd (secure config)   Stefano Babic
• [U-Boot] [PATCH] mx6: wandboard: fix warning due to missing prototype   Stefano Babic
• [U-Boot] [PATCH] pico-imx6ul: drop warning due to redefined   Stefano Babic
• [U-Boot] (no subject)   Stefano Babic
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Stefano Babic
• [U-Boot] [PATCH v3] nitrogen6x : Use generic distro configuration   Stefano Babic
• [U-Boot] suggested/stealable setups for robustness with switchable partitions?   Stefano Babic
• [U-Boot] [PATCH] mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT   Stefano Babic
• [U-Boot] [PATCH v2] arm: imx: Add support for Advantech DMS-BA16 board   Stefano Babic
• [U-Boot] [PATCH 1/2] board: tbs2910: always enable usbkbd   Stefano Babic
• [U-Boot] [PATCH 2/2] board: tbs2910: fix HDMI pre-console buffer   Stefano Babic
• [U-Boot] [PATCH 0/4] make rs232 and dio board-specific   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: ventana: default pci to disabled   Stefano Babic
• [U-Boot] [PATCH 1/2] pci: allow disabling of pci init/enum via env   Stefano Babic
• [U-Boot] [PATCH 1/2] imx: ventana: add dt fixup for GW16082 irq mapping   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: ventana: add dt fixup for eth1 mac-address   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: re-enable late board info display   Stefano Babic
• [U-Boot] [PATCH 0/2] imx: ventana: add dt fixup for watchdog external reset   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: enable splashscreen support   Stefano Babic
• [U-Boot] [PATCH 1/3] wandboard: Replace is_cpu_type() for macro   Stefano Babic
• [U-Boot] [PATCH 2/3] mx6cuboxi: Replace is_mx6q() for macro   Stefano Babic
• [U-Boot] [PATCH 3/3] cgtqmx6eval: Replace is_mx6q() for macro   Stefano Babic
• [U-Boot] [PATCH v3] colibri_imx7: add Colibri iMX7S/iMX7D module support   Stefano Babic
• [U-Boot] [PATCH] warp7: Move some USB configuration options to defconfig   Stefano Babic
• [U-Boot] [PATCH 1/5] warp: Use imx_ddr_size() for calculating the DDR size   Stefano Babic
• [U-Boot] [PATCH 2/5] aristainetos: Use imx_ddr_size() for calculating the DDR size   Stefano Babic
• [U-Boot] [PATCH 3/5] bx50v3: Use imx_ddr_size() for calculating the DDR size   Stefano Babic
• [U-Boot] [PATCH 4/5] novena: Remove uneeded PHYS_SDRAM_SIZE   Stefano Babic
• [U-Boot] [PATCH 5/5] cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE   Stefano Babic
• [U-Boot] [PATCH] mx6ul_14x14_evk: Remove unused define   Stefano Babic
• [U-Boot] [PATCH] mx7_common: initialize generic timer on all CPU's   Stefano Babic
• [U-Boot] [PATCH] mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig   Stefano Babic
• [U-Boot] [PATCH] MAINTAINERS: i.MX: Add board/freescale/*mx* path   Stefano Babic
• [U-Boot] [PATCH v2] arm: imx: Add support for Advantech DMS-BA16 board   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: enable splashscreen support   Stefano Babic
• [U-Boot] [PATCH v2] arm: imx: Add support for Advantech DMS-BA16 board   Stefano Babic
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Ravi Babu
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   Ravi Babu
• [U-Boot] [RFC PATCH v2 1/5] spl: dfu: add dfu support in SPL   Ravi Babu
• [U-Boot] [RFC PATCH v2 2/5] common: dfu: saperate the dfu common functionality   Ravi Babu
• [U-Boot] [RFC PATCH v2 3/5] spl: dfu: adding dfu support functions for SPL-DFU   Ravi Babu
• [U-Boot] [RFC PATCH v2 4/5] dra7x: boot: add dfu bootmode support   Ravi Babu
• [U-Boot] [RFC PATCH v2 5/5] dra7x: configs: enable SPL-DFU support   Ravi Babu
• [U-Boot] [PATCH] Kconfig: dra7x: Kconfig based PHYS_64BIT select based on Soc type   Ravi Babu
• [U-Boot] [RFC PATCH v3 0/5] SPL: DFU Support in SPL   Ravi Babu
• [U-Boot] [RFC PATCH v3 1/5] spl: dfu: add dfu support in SPL   Ravi Babu
• [U-Boot] [RFC PATCH v3 2/5] common: dfu: saperate the dfu common functionality   Ravi Babu
• [U-Boot] [RFC PATCH v3 3/5] spl: dfu: adding dfu support functions for SPL-DFU   Ravi Babu
• [U-Boot] [RFC PATCH v3 4/5] dra7x: boot: add dfu bootmode support   Ravi Babu
• [U-Boot] [RFC PATCH v3 5/5] dra7x: configs: enable SPL-DFU support   Ravi Babu
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Alon Bar-Lev
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Alon Bar-Lev
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Alon Bar-Lev
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Alon Bar-Lev
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Alon Bar-Lev
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Alon Bar-Lev
• [U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB   Rajesh Bhagat
• [U-Boot] [PATCH 1/5] drivers: usb: fsl: Make function for initialization to use in CONFIG_DM_USB   Rajesh Bhagat
• [U-Boot] [PATCH 2/5] usb: ehci: fsl: Add code to use CONFIG_DM_USB   Rajesh Bhagat
• [U-Boot] [PATCH 3/5] usb: xhci: fsl: Add code to use CONFIG_DM_USB   Rajesh Bhagat
• [U-Boot] [PATCH 4/5] dm: ls1021a: dts: Update USB 3.0 node to support DM USB   Rajesh Bhagat
• [U-Boot] [PATCH 5/5] arm: ls1021a: Enable CONFIG_DM_USB in defconfigs   Rajesh Bhagat
• [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings   Rajesh Bhagat
• [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings   Rajesh Bhagat
• [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support   Rajesh Bhagat
• [U-Boot] [PATCH v2] include: usb: Rename USB controller base address mapping   Rajesh Bhagat
• [U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB   Rajesh Bhagat
• [U-Boot] testing: [PATCH v7 0/3] common: usb_storage: Implement logic to calculate optimal usb maximum trasfer blocks   Rajesh Bhagat
• [U-Boot] testing: [PATCH v7 0/3] common: usb_storage: Implement logic to calculate optimal usb maximum trasfer blocks   Rajesh Bhagat
• [U-Boot] [PATCH] arm: imx: Add support for Advantech DMS-BA16 board   Akshay Bhat
• [U-Boot] [PATCH] arm: imx: Add support for Advantech DMS-BA16 board   Akshay Bhat
• [U-Boot] [PATCH v2] arm: imx: Add support for Advantech DMS-BA16 board   Akshay Bhat
• [U-Boot] [PATCH v2] arm: imx: Add support for Advantech DMS-BA16 board   Akshay Bhat
• [U-Boot] [PATCH v3] arm: imx: Add support for Advantech DMS-BA16 board   Akshay Bhat
• [U-Boot] cmd, nand: add an option to disable the verification when writing in raw mode   Boris Brezillon
• [U-Boot] testing: [PATCH v7 0/3] common: usb_storage: Implement logic to calculate optimal usb maximum trasfer blocks   Matthew Bright
• [U-Boot] [PATCH] splash: Accommodate DM_USB in splash_init_usb()   Alexey Brodkin
• [U-Boot] [PATCH] splash: Introduce default_splash_locations   Alexey Brodkin
• [U-Boot] [PATCH] net: designware: Make driver independent from DM_GPIO again   Alexey Brodkin
• [U-Boot] Please pull ARC changes   Alexey Brodkin
• [U-Boot] Wandboard: u-boot.img is getting too large   Alexey Brodkin
• [U-Boot] Wandboard: u-boot.img is getting too large   Alexey Brodkin
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Alexey Brodkin
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Alexey Brodkin
• [U-Boot] [PATCH 0/7] MIPS Boston Development Board Support   Paul Burton
• [U-Boot] [PATCH 1/7] serial: ns16550: Support clocks via phandle   Paul Burton
• [U-Boot] [PATCH 2/7] dt-bindings: Add interrupt-controller/mips-gic.h header   Paul Burton
• [U-Boot] [PATCH 3/7] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge   Paul Burton
• [U-Boot] [PATCH 4/7] pci: Flip condition for detecting non-PCI parent devices   Paul Burton
• [U-Boot] [PATCH 5/7] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base   Paul Burton
• [U-Boot] [PATCH 6/7] net: pch_gbe: Make 64 bit safe   Paul Burton
• [U-Boot] [PATCH 7/7] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH 7/7] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH 3/7] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge   Paul Burton
• [U-Boot] [PATCH v2 00/10] MIPS Boston Development Board Support   Paul Burton
• [U-Boot] [PATCH v2 01/10] serial: ns16550: Support clocks via phandle   Paul Burton
• [U-Boot] [PATCH v2 02/10] dt-bindings: Add interrupt-controller/mips-gic.h header   Paul Burton
• [U-Boot] [PATCH v2 03/10] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge   Paul Burton
• [U-Boot] [PATCH v2 04/10] pci: Flip condition for detecting non-PCI parent devices   Paul Burton
• [U-Boot] [PATCH v2 05/10] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base   Paul Burton
• [U-Boot] [PATCH v2 06/10] net: pch_gbe: Make 64 bit safe   Paul Burton
• [U-Boot] [PATCH v2 07/10] dm: regmap: Implement simple regmap_read & regmap_write   Paul Burton
• [U-Boot] [PATCH v2 08/10] dm: syscon: Provide a generic syscon driver   Paul Burton
• [U-Boot] [PATCH v2 09/10] clk: boston: Providea simple driver for Boston board clocks   Paul Burton
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH v3 10/10] boston: Introduce support for the MIPS Boston development board   Paul Burton
• [U-Boot] [PATCH v2] common: cli_readline: Improve command line editing   James Byrne
• [U-Boot] Missing maintainers[Involving remittance information, please pay attention to the safety of property]   Eddie Cai
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Eddie Cai
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Carlo Caione
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Carlo Caione
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Carlo Caione
• [U-Boot] [PATCH] sunxi: Remove some unnecessary #ifdefs   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: Add support for multiple ethadrr-esses   Ian Campbell
• [U-Boot] [PATCH 1/4] sunxi: Use BROM stored boot_media value to determine our boot-source   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: Add support for multiple ethadrr-esses   Ian Campbell
• [U-Boot] [PATCH 29/30] RFC: Use binman for a sunxi board   Ian Campbell
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC   Ian Campbell
• [U-Boot] [PATCH] sunxi: Disable sun8i emac driver   Ian Campbell
• [U-Boot] [PATCH 1/4] net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers   Ian Campbell
• [U-Boot] [PATCH 2/4] sunxi: Ensure that the NIC specific bytes of the mac are not all 0   Ian Campbell
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Ian Campbell
• [U-Boot] [PATCH 4/4] sunxi: Re-enable h3 emac support   Ian Campbell
• [U-Boot] [PATCH v2] sun8i: On H3 Use words 1-3 instead of just word 3 from the SID   Ian Campbell
• [U-Boot] [PATCH v2] net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers   Ian Campbell
• [U-Boot] [PATCH v3] sunxi: On newer SoCs use words 1-3 instead of just word 3 from the SID   Ian Campbell
• [U-Boot] TLB RPN is is virtual address or normal number   Rama Chandra
• [U-Boot] [PATCH 1/2] fs/fat/fatwrite: Local variable as buffer to store dir_slot entries   Tien Fong Chee
• [U-Boot] [PATCH 2/2] fs/fat/fat: Optimizes memory size with single global variable instead of 3   Tien Fong Chee
• [U-Boot] [PATCH 1/2] fs/fat/fatwrite: Local variable as buffer to store dir_slot entries   Tien Fong Chee
• [U-Boot] [PATCH 2/2] fs/fat/fat: Optimizes memory size with single global variable instead of 3   Tien Fong Chee
• [U-Boot] [PATCH 1/2] fs/fat/fatwrite: Local variable as buffer to store dir_slot entries   Tien Fong Chee
• [U-Boot] [PATCH 2/2] fs/fat/fat: Optimizes memory size with single global variable instead of 3   Tien Fong Chee
• [U-Boot] [PATCH] serial: Enable checking UART is ready for console based on device tree   Tien Fong Chee
• [U-Boot] [PATCH] serial: Enable checking UART is ready for console based on device tree   Tien Fong Chee
• [U-Boot] [PATCH 1/2] fs/fat/fatwrite: Local variable as buffer to store dir_slot entries   Tien Fong Chee
• [U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3   Tien Fong Chee
• [U-Boot] [PATCH v2] mmc: increase MMC SDHCI read status timeout   Jaehoon Chung
• [U-Boot] [PATCH] MMC: Do not write to mmc_uclass_priv if it was not allocated   Jaehoon Chung
• [U-Boot] [PATCH] MMC: Do not write to mmc_uclass_priv if it was not allocated   Jaehoon Chung
• [U-Boot] [PATCH] dm: mmc: Add the function for getting current device number   Jaehoon Chung
• [U-Boot] [PATCH v2 08/13] dm: mmc: zynq: Convert zynq to use driver model for MMC   Jaehoon Chung
• [U-Boot] [PATCH] sunxi: mmc: increase status register polling rate for data transfers   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sdhci: clean up time out detection   Jaehoon Chung
• [U-Boot] [PATCH 2/3] FIX: mmc: sdhci: Board specific definitions for SDHCI CMD and READ TIMEOUTS   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Jaehoon Chung
• [U-Boot] [PATCH 2/2] mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B   Jaehoon Chung
• [U-Boot] [PATCH] dm: mmc: Add the function for getting current device number   Jaehoon Chung
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Jaehoon Chung
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Jaehoon Chung
• [U-Boot] [PATCH 1/3] mmc: dw_mmc: remove the duplicated header file   Jaehoon Chung
• [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: remove the duplcated header file   Jaehoon Chung
• [U-Boot] [PATCH 3/3] mmc: use the generic error number   Jaehoon Chung
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc-uclass: correct the device number   Jaehoon Chung
• [U-Boot] [PATCH] mmc: fix the output format   Jaehoon Chung
• [U-Boot] [PATCH v3] mmc-uclass: correct the device number   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: display mmc list information like mmc_legacy type   Jaehoon Chung
• [U-Boot] [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support   Jaehoon Chung
• [U-Boot] [PATCH] mmc: s5p_sdhci: support the Driver model for Exynos   Jaehoon Chung
• [U-Boot] [PATCH] fixing typo error in README file. CPU15 -> CP15   Jaehoon Chung
• [U-Boot] [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support   Jaehoon Chung
• [U-Boot] [PATCH v3] mmc-uclass: correct the device number   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Jaehoon Chung
• [U-Boot] [PATCH v3] mmc: display mmc list information like mmc_legacy type   Jaehoon Chung
• [U-Boot] [PATCH 2/2] mmc: rockchip: add clock init   Jaehoon Chung
• [U-Boot] [PATCH v4] mmc-uclass: correct the device number   Jaehoon Chung
• [U-Boot] [PATCH v8] mmc: atmel_sdhci: Convert to the driver model support   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sdhci: revert "mmc: sdhci: Claer high speed if not supported"   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg   Jaehoon Chung
• [U-Boot] [PATCH 2/2] mmc: sdhci: remove the unnecessary argumetns for sdhci_setup_cfg   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Jaehoon Chung
• [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards   Jaehoon Chung
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg   Jaehoon Chung
• [U-Boot] mmc erase Command and Bad Sectors   Jaehoon Chung
• [U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs   Jaehoon Chung
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   Jaehoon Chung
• [U-Boot] [PATCH] mmc: dw_mmc: fix the wrong Mask bit boundary for fifo_count bit   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sdhci: revert "mmc: sdhci: Claer high speed if not supported"   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: transfer proper bytes to FIFO   Jaehoon Chung
• [U-Boot] [PATCH 2/2] mmc: dw_mmc: fix data starvation by host timeout under FIFO mode   Jaehoon Chung
• [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards   Jaehoon Chung
• [U-Boot] [PATCH v2 1/2] rk3399: add basic soc driver   Jaehoon Chung
• [U-Boot] [PATCH v2 2/2] mmc: rockchip: add clock init   Jaehoon Chung
• [U-Boot] [PATCH] MMC: Do not write to mmc_uclass_priv if it was not allocated   Matt Corallo
• [U-Boot] [PATCH] driver: fsl_qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH] driver: fsl_qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH v2] driver: fsl_qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH] driver: fsl_qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH v2] driver: fsl_qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH] driver: spi: fsl-qspi: remove compile Warnings   Yunhui Cui
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH v2] driver: spi: fsl-qspi: remove compile Warnings   Yunhui Cui
• [U-Boot] [PATCH] driver: spi: fsl-qspi: remove compile Warnings   Yunhui Cui
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   Yunhui Cui
• [U-Boot] [PATCH v3 0/9] Secure Boot by Authenticating/Decrypting SPL FIT blobs   Andreas Dannenberg
• [U-Boot] [PATCH v3 0/9] Secure Boot by Authenticating/Decrypting SPL FIT blobs   Andreas Dannenberg
• [U-Boot] [PATCH v3 0/9] Secure Boot by Authenticating/Decrypting SPL FIT blobs   Andreas Dannenberg
• [U-Boot] [PATCH 0/2] fix build dependency for TI secure devices   Andreas Dannenberg
• [U-Boot] [PATCH 1/2] arm: am4x: fix build dependency for secure devices   Andreas Dannenberg
• [U-Boot] [PATCH 2/2] arm: omap5: fix build dependency for secure devices   Andreas Dannenberg
• [U-Boot] [PATCH] common: image: Add support for post-processing of images   Andreas Dannenberg
• [U-Boot] [PATCH] common: image: Add support for post-processing of images   Andreas Dannenberg
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix SPL_BUILD compilation by adding CONFIG_USB_EHCI_FSL flag   Sriram Dash
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix SPL_BUILD compilation by adding CONFIG_USB_EHCI_FSL flag   Sriram Dash
• [U-Boot] [PATCH v2 0/5] Modified the errata A006261 according to endianness   Sriram Dash
• [U-Boot] [PATCH v2 1/5] mpc85xx/powerpc:cpu_init: Modified the errata A006261 according to endianness   Sriram Dash
• [U-Boot] [PATCH v2 2/5] mpc85xx/powerpc:P1010: Apply errata A006261 for P1010   Sriram Dash
• [U-Boot] [PATCH v2 3/5] mpc85xx/powerpc: P2041: Apply errata A006261 for P2041   Sriram Dash
• [U-Boot] [PATCH v2 4/5] mpc85xx/powerpc: P5040: Apply errata A006261 for P5040   Sriram Dash
• [U-Boot] [PATCH v2 5/5] mpc85xx/powerpc: Do not apply errata A006261 for T4160, T1040, T2080   Sriram Dash
• [U-Boot] [PATCH] drivers:usb:common:fsl-dt-fixup: Fix the dt for all type of usb controllers   Sriram Dash
• [U-Boot] where *precisely* is u-boot's environment stored?   Robert P. J. Day
• [U-Boot] where *precisely* is u-boot's environment stored?   Robert P. J. Day
• [U-Boot] where *precisely* is u-boot's environment stored?   Robert P. J. Day
• [U-Boot] where *precisely* is u-boot's environment stored?   Robert P. J. Day
• [U-Boot] where *precisely* is u-boot's environment stored?   Robert P. J. Day
• [U-Boot] in Kbuild, what is the difference between "extra-" and "obj-"?   Robert P. J. Day
• [U-Boot] "(ulong)&default_environment[0]" vs "(ulong)default_environment"?   Robert P. J. Day
• [U-Boot] where *precisely* is u-boot's environment stored?   Robert P. J. Day
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Robert P. J. Day
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Robert P. J. Day
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Robert P. J. Day
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Robert P. J. Day
• [U-Boot] does u-boot automatically determine valid command abbreviations?   Robert P. J. Day
• [U-Boot] best way to submit a patch for numerous, tree-wide typoz?   Robert P. J. Day
• [U-Boot] does u-boot automatically determine valid command abbreviations?   Robert P. J. Day
• [U-Boot] Various, unrelated tree-wide typo fixes.   Robert P. J. Day
• [U-Boot] update u-boot BDM/JTAG debugger page?   Robert P. J. Day
• [U-Boot] curious about "#ifndef CONFIG_ENV_OVERWRITE" test in lsxl.c   Robert P. J. Day
• [U-Boot] Various, unrelated tree-wide typo fixes.   Robert P. J. Day
• [U-Boot] [PATCH v2] Various, unrelated tree-wide typo fixes.   Robert P. J. Day
• [U-Boot] update u-boot BDM/JTAG debugger page?   Robert P. J. Day
• [U-Boot] update u-boot BDM/JTAG debugger page?   Robert P. J. Day
• [U-Boot] update u-boot BDM/JTAG debugger page?   Robert P. J. Day
• [U-Boot] is minicom still discouraged as the serial comms program?   Robert P. J. Day
• [U-Boot] file "doc/README.mpc83xxads" seems way obsolete   Robert P. J. Day
• [U-Boot] what is with the "#if 0"ed part of ARP hdr in include/net.h?   Robert P. J. Day
• [U-Boot] more "#if 0" pedantry related to moving macros in header files   Robert P. J. Day
• [U-Boot] online wiki page for "fdt" commands full of FDT_ERR_BADMAGIC msgs   Robert P. J. Day
• [U-Boot] supported image compression types?   Robert P. J. Day
• [U-Boot] is minicom still discouraged as the serial comms program?   Robert P. J. Day
• [U-Boot] online wiki page for "fdt" commands full of FDT_ERR_BADMAGIC msgs   Robert P. J. Day
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Robert P. J. Day
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Robert P. J. Day
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Robert P. J. Day
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Robert P. J. Day
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Robert P. J. Day
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Robert P. J. Day
• [U-Boot] "uEnv.txt" versus "fw_setenv" -- a question about style   Robert P. J. Day
• [U-Boot] suggested/stealable setups for robustness with switchable partitions?   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] selecting CONFIG_BOOTCOUNT_RAM requires defining BOOTCOUNT_ADDR, yes?   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] a few questions about saving bootcount in the environment   Robert P. J. Day
• [U-Boot] what does "CONFIG_U_QE" represent powerpc quicc engine?   Robert P. J. Day
• [U-Boot] what does "CONFIG_U_QE" represent powerpc quicc engine?   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] suggested/stealable setups for robustness with switchable partitions?   Robert P. J. Day
• [U-Boot] suggested/stealable setups for robustness with switchable partitions?   Robert P. J. Day
• [U-Boot] [PATCH 1/3] cmd: bootz: make CMD_BOOTZ depend on CMD_BOOTM   Robert P. J. Day
• [U-Boot] a few questions about saving bootcount in the environment   Robert P. J. Day
• [U-Boot] a few questions about saving bootcount in the environment   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Robert P. J. Day
• [U-Boot] a few questions about saving bootcount in the environment   Robert P. J. Day
• [U-Boot] a few questions about saving bootcount in the environment   Robert P. J. Day
• [U-Boot] a few questions about saving bootcount in the environment   Robert P. J. Day
• [U-Boot] should denx wiki page on bootcount mention "failbootcmd"?   Robert P. J. Day
• [U-Boot] [PATCH 1/3] usb: add CONIFG_USB_OHCI_HCD in Kconfig   Robert P. J. Day
• [U-Boot] Wandboard: u-boot.img is getting too large   Wolfgang Denk
• [U-Boot] where *precisely* is u-boot's environment stored?   Wolfgang Denk
• [U-Boot] where *precisely* is u-boot's environment stored?   Wolfgang Denk
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Wolfgang Denk
• [U-Boot] Brotli Compression to Fit Image/bzImage   Wolfgang Denk
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Wolfgang Denk
• [U-Boot] what are valid formats for initrd image downloaded and used by "bootm"   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2016.07 is released   Wolfgang Denk
• [U-Boot] does u-boot automatically determine valid command abbreviations?   Wolfgang Denk
• [U-Boot] is minicom still discouraged as the serial comms program?   Wolfgang Denk
• [U-Boot] is minicom still discouraged as the serial comms program?   Wolfgang Denk
• [U-Boot] what is with the "#if 0"ed part of ARP hdr in include/net.h?   Wolfgang Denk
• [U-Boot] more "#if 0" pedantry related to moving macros in header files   Wolfgang Denk
• [U-Boot] online wiki page for "fdt" commands full of FDT_ERR_BADMAGIC msgs   Wolfgang Denk
• [U-Boot] [PATCH 1/1] configs/wandboard.h: fix dtb file name for findfdt.   Wolfgang Denk
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Wolfgang Denk
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Wolfgang Denk
• [U-Boot] MPC8347 Initial Boot problems   Wolfgang Denk
• [U-Boot] Dynamic linker in uboot   Wolfgang Denk
• [U-Boot] "uEnv.txt" versus "fw_setenv" -- a question about style   Wolfgang Denk
• [U-Boot] suggested/stealable setups for robustness with switchable partitions?   Wolfgang Denk
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Wolfgang Denk
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Wolfgang Denk
• [U-Boot] a few questions about saving bootcount in the environment   Wolfgang Denk
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Wolfgang Denk
• [U-Boot] a few questions about saving bootcount in the environment   Wolfgang Denk
• [U-Boot] a few questions about saving bootcount in the environment   Wolfgang Denk
• [U-Boot] a few questions about saving bootcount in the environment   Wolfgang Denk
• [U-Boot] [PATCH 03/10] arm: dts: imx7: add pinctrl defines   Wolfgang Denk
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Wolfgang Denk
• [U-Boot] a few questions about saving bootcount in the environment   Wolfgang Denk
• [U-Boot] [PATCH 0/2] am33xx/am437x u-boot DDR init fixes   Russ Dill
• [U-Boot] [PATCH 1/2] ARM: am33xx: Fix DDR init delay placement   Russ Dill
• [U-Boot] [PATCH 2/2] ARM: am33xx: Always inhibit init/refresh during DDR phy init   Russ Dill
• [U-Boot] [PATCH 0/2] am33xx/am437x u-boot DDR init fixes   Russ Dill
• [U-Boot] [PATCH] sunxi: mmc: increase status register polling rate for data transfers   Tobias Doerffel
• [U-Boot] [RESEND PATCH] sunxi: mmc: increase status register polling rate for data transfers   Tobias Doerffel
• [U-Boot] [PATCH] mx6ul_14x14_evk: Remove unused define   Diego Dorta
• [U-Boot] pull request: u-boot-coldfire/master   Angelo Dureghello
• [U-Boot] [PATCH 1/1] configs/wandboard.h: fix dtb file name for findfdt.   Adam Duskett
• [U-Boot] [PATCH 1/1] configs/wandboard.h: fix dtb file name for findfdt.   Adam Duskett
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Adam Duskett
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Adam Duskett
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Adam Duskett
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Adam Duskett
• [U-Boot] [U-BOOT] [ERROR] Trouble Building uboot for A10s Allwinner red-brick   Dennis Eberstein
• [U-Boot] erasing u-boot from u-boot   Mike.Worster at Emerson.com
• [U-Boot] [PATCH 4/9] mx7: set soc environment according to exact SoC type   Fabio Estevam
• [U-Boot] Wandboard: u-boot.img is getting too large   Fabio Estevam
• [U-Boot] [PATCH 4/9] mx7: set soc environment according to exact SoC type   Fabio Estevam
• [U-Boot] [PATCH] pico-imx6ul: Add USB Host support   Fabio Estevam
• [U-Boot] drivers/crypto/fsl/Makefile: strange assignment   Fabio Estevam
• [U-Boot] [PATCH] warp7: Increase CONFIG_BOOTDELAY   Fabio Estevam
• [U-Boot] [PATCH v2] pico-imx6ul: Add PMIC support   Fabio Estevam
• [U-Boot] [PATCH v2] warp7: Remove CONFIG_BOOTDELAY variable   Fabio Estevam
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Fabio Estevam
• [U-Boot] [PATCH] mx6: clock: Fix the logic for reading axi_alt_sel   Fabio Estevam
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Fabio Estevam
• [U-Boot] [PATCH 1/1] configs/wandboard.h: fix dtb file name for findfdt.   Fabio Estevam
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Fabio Estevam
• [U-Boot] erasing u-boot from u-boot   Fabio Estevam
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Fabio Estevam
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Fabio Estevam
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Fabio Estevam
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Fabio Estevam
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Fabio Estevam
• [U-Boot] [PATCH] serial_mxc: Remove unconditional DCE setting   Fabio Estevam
• [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"   Fabio Estevam
• [U-Boot] [PATCH 1/3] wandboard: Replace is_cpu_type() for macro   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6cuboxi: Replace is_mx6q() for macro   Fabio Estevam
• [U-Boot] [PATCH 3/3] cgtqmx6eval: Replace is_mx6q() for macro   Fabio Estevam
• [U-Boot] [PATCH] mx7: Allow selection of secure or non-secure mode   Fabio Estevam
• [U-Boot] [PATCH] Fix build for mx7dsabresd (secure config)   Fabio Estevam
• [U-Boot] [PATCH] pico-imx6ul: drop warning due to redefined   Fabio Estevam
• [U-Boot] [PATCH] mx6: wandboard: fix warning due to missing prototype   Fabio Estevam
• [U-Boot] [PATCH] mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT   Fabio Estevam
• [U-Boot] [PATCH 1/5] warp: Use imx_ddr_size() for calculating the DDR size   Fabio Estevam
• [U-Boot] [PATCH 2/5] aristainetos: Use imx_ddr_size() for calculating the DDR size   Fabio Estevam
• [U-Boot] [PATCH 3/5] bx50v3: Use imx_ddr_size() for calculating the DDR size   Fabio Estevam
• [U-Boot] [PATCH 4/5] novena: Remove uneeded PHYS_SDRAM_SIZE   Fabio Estevam
• [U-Boot] [PATCH 5/5] cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE   Fabio Estevam
• [U-Boot] [PATCH] mx7: Allow selection of secure or non-secure mode   Fabio Estevam
• [U-Boot] [PATCH] mx6ul_14x14_evk: Remove unused define   Fabio Estevam
• [U-Boot] [PATCH] mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig   Fabio Estevam
• [U-Boot] [PATCH] MAINTAINERS: i.MX: Add board/freescale/*mx* path   Fabio Estevam
• [U-Boot] [PATCH] mx7dsabresd: Print secure/non-secure mode info   Fabio Estevam
• [U-Boot] erasing u-boot from u-boot   Peng Fan
• [U-Boot] erasing u-boot from u-boot   Peng Fan
• [U-Boot] [PATCH v2 0/4] tools/env: minor refactorings   Andreas Fenkart
• [U-Boot] [PATCH v2 1/4] tools/env: return with error if redundant environments have unequal size   Andreas Fenkart
• [U-Boot] [PATCH v2 2/4] tools/env: kernel-doc for fw_printenv, fw_getenv and fw_parse_script   Andreas Fenkart
• [U-Boot] [PATCH v2 3/4] tools/env: move envmatch further up in file to avoid forward declarations   Andreas Fenkart
• [U-Boot] [PATCH v2 4/4] tools/env: reuse fw_getenv in fw_printenv function   Andreas Fenkart
• [U-Boot] [PATCH 2/4] tools/env: javadoc for fw_printenv, fw_getenv and fw_parse_script   Andreas Fenkart
• [U-Boot] [PATCH 1/2] tools/env: complete environment device config early   Andreas Fenkart
• [U-Boot] [PATCH 2/2] tools/env: allow negative offsets   Andreas Fenkart
• [U-Boot] storage support for ub_dev_write API function   Ihar Filipau
• [U-Boot] [PATCH] storage device support for ub_dev_write   Ihar Filipau
• [U-Boot] UBIFS status in the mainline   Max Filippov
• [U-Boot] UBIFS status in the mainline   Max Filippov
• [U-Boot] UBIFS status in the mainline   Max Filippov
• [U-Boot] [PATCH v2 0/8] U-Boot port to Xtensa architecture   Max Filippov
• [U-Boot] [PATCH 1/8] xtensa: add support for the xtensa processor architecture [1/2]   Max Filippov
• [U-Boot] [PATCH 2/8] xtensa: add support for the xtensa processor architecture [2/2]   Max Filippov
• [U-Boot] [PATCH 3/8] xtensa: add core information for the dc232b processor   Max Filippov
• [U-Boot] [PATCH 4/8] xtensa: add core information for the dc233c processor   Max Filippov
• [U-Boot] [PATCH 5/8] xtensa: add core information for the de212 processor   Max Filippov
• [U-Boot] [PATCH 6/8] net/ethoc: support private memory configurations   Max Filippov
• [U-Boot] [PATCH 7/8] net/ethoc: don't advertise gigabit on the connected PHY   Max Filippov
• [U-Boot] [PATCH 8/8] xtensa: add support for the 'xtfpga' evaluation board   Max Filippov
• [U-Boot] [PATCH 1/8] xtensa: add support for the xtensa processor architecture [1/2]   Max Filippov
• [U-Boot] [PATCH 2/8] xtensa: add support for the xtensa processor architecture [2/2]   Max Filippov
• [U-Boot] [PATCH 3/8] xtensa: add core information for the dc232b processor   Max Filippov
• [U-Boot] [PATCH 4/8] xtensa: add core information for the dc233c processor   Max Filippov
• [U-Boot] [PATCH 5/8] xtensa: add core information for the de212 processor   Max Filippov
• [U-Boot] [PATCH 6/8] net/ethoc: support private memory configurations   Max Filippov
• [U-Boot] [PATCH 7/8] net/ethoc: don't advertise gigabit on the connected PHY   Max Filippov
• [U-Boot] [PATCH 7/8] net/ethoc: don't advertise gigabit on the connected PHY   Max Filippov
• [U-Boot] [PATCH 8/8] xtensa: add support for the 'xtfpga' evaluation board   Max Filippov
• [U-Boot] [PATCH 8/8] xtensa: add support for the 'xtfpga' evaluation board   Max Filippov
• [U-Boot] [PATCH 0/7] cmd/bdinfo: extract common parts and reuse them   Max Filippov
• [U-Boot] [PATCH 1/7] cmd/bdinfo: extract print_bi_boot_params   Max Filippov
• [U-Boot] [PATCH 1/6] cmd/bdinfo: extract print_bi_mem   Max Filippov
• [U-Boot] [PATCH 2/6] cmd/bdinfo: extract print_bi_dram   Max Filippov
• [U-Boot] [PATCH 2/7] cmd/bdinfo: extract print_bi_mem   Max Filippov
• [U-Boot] [PATCH 3/7] cmd/bdinfo: extract print_bi_dram   Max Filippov
• [U-Boot] [PATCH 3/6] cmd/bdinfo: extract print_bi_flash   Max Filippov
• [U-Boot] [PATCH 4/7] cmd/bdinfo: extract print_bi_flash   Max Filippov
• [U-Boot] [PATCH 4/6] cmd/bdinfo: extract print_eth_ip_addr   Max Filippov
• [U-Boot] [PATCH 5/6] cmd/bdinfo: extract print_baudrate   Max Filippov
• [U-Boot] [PATCH 5/7] cmd/bdinfo: extract print_eth_ip_addr   Max Filippov
• [U-Boot] [PATCH 6/7] cmd/bdinfo: extract print_baudrate   Max Filippov
• [U-Boot] [PATCH 6/6] cmd/bdinfo: extract print_std_bdinfo   Max Filippov
• [U-Boot] [PATCH 0/7] cmd/bdinfo: extract common parts and reuse them   Max Filippov
• [U-Boot] [PATCH 0/7] cmd/bdinfo: extract common parts and reuse them   Max Filippov
• [U-Boot] [PATCH 1/7] cmd/bdinfo: extract print_bi_boot_params   Max Filippov
• [U-Boot] [PATCH 2/7] cmd/bdinfo: extract print_bi_mem   Max Filippov
• [U-Boot] [PATCH 3/7] cmd/bdinfo: extract print_bi_dram   Max Filippov
• [U-Boot] [PATCH 4/7] cmd/bdinfo: extract print_bi_flash   Max Filippov
• [U-Boot] [PATCH 5/7] cmd/bdinfo: extract print_eth_ip_addr   Max Filippov
• [U-Boot] [PATCH 6/7] cmd/bdinfo: extract print_baudrate   Max Filippov
• [U-Boot] [PATCH 7/7] cmd/bdinfo: extract print_std_bdinfo   Max Filippov
• [U-Boot] [PATCH v2 0/7] cmd/bdinfo: extract common parts and reuse them   Max Filippov
• [U-Boot] [PATCH v2 1/7] cmd/bdinfo: extract print_bi_boot_params   Max Filippov
• [U-Boot] [PATCH v2 2/7] cmd/bdinfo: extract print_bi_mem   Max Filippov
• [U-Boot] [PATCH v2 3/7] cmd/bdinfo: extract print_bi_dram   Max Filippov
• [U-Boot] [PATCH v2 4/7] cmd/bdinfo: extract print_bi_flash   Max Filippov
• [U-Boot] [PATCH v2 5/7] cmd/bdinfo: extract print_eth_ip_addr   Max Filippov
• [U-Boot] [PATCH v2 6/7] cmd/bdinfo: extract print_baudrate   Max Filippov
• [U-Boot] [PATCH v2 7/7] cmd/bdinfo: extract print_std_bdinfo   Max Filippov
• [U-Boot] [PATCHv2][RESEND] spi: Add support for N25Q016A   Moritz Fischer
• [U-Boot] [PATCHv3] spi: Add support for N25Q016A   Moritz Fischer
• [U-Boot] [PATCHv2][RESEND] spi: Add support for N25Q016A   Moritz Fischer
• [U-Boot] [PATCH 2/3] serial: zynq: Read information about clock from DT   Moritz Fischer
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Andreas Färber
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Andreas Färber
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Andreas Färber
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Andreas Färber
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Andreas Färber
• [U-Boot] [PATCH] dragonboard410c: prefer sdcard boot over emmc   Andreas Färber
• [U-Boot] [PATCH 0/6] efi_loader: Improvements to .dtb handling   Andreas Färber
• [U-Boot] [PATCH 1/6] efi_loader: Cosmetic distro script cleanups   Andreas Färber
• [U-Boot] [PATCH 2/6] efi_loader: Respect $boot_prefixes for EFI .dtb search   Andreas Färber
• [U-Boot] [PATCH 3/6] efi_loader: Search .dtb on non-EFI partitions   Andreas Färber
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Andreas Färber
• [U-Boot] [PATCH 5/6] dragonboard410c: Set soc_vendor   Andreas Färber
• [U-Boot] [PATCH 6/6] efi_loader: Display which .dtb we found   Andreas Färber
• [U-Boot] [PATCH v4] rockchip: add option to change method of loading u-boot   Andreas Färber
• [U-Boot] [PATCH 3/6] efi_loader: Search .dtb on non-EFI partitions   Andreas Färber
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Andreas Färber
• [U-Boot] [PATCH 6/6] efi_loader: Display which .dtb we found   Andreas Färber
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Andreas Färber
• [U-Boot] [PATCH 6/6] efi_loader: Display which .dtb we found   Andreas Färber
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Andreas Färber
• [U-Boot] How to support ATF on u-boot   Andreas Färber
• [U-Boot] How to support ATF on u-boot   Andreas Färber
• [U-Boot] [PATCH] rockchip: Clean up CPU selection   Andreas Färber
• [U-Boot] [PATCH] rockchip: Exclude rk_timer for ARM64   Andreas Färber
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Andreas Färber
• [U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi   Andreas Färber
• [U-Boot] [PATCH 3/9] cosmetic: rockchip: sort socs according to numbers   Andreas Färber
• [U-Boot] [PATCH v2] armv8: spl: Call board_init_r from crt0_64 in SPL   Andreas Färber
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Andreas Färber
• [U-Boot] Please pull u-boot-sunxi master   Andreas Färber
• [U-Boot] PCIe bridges on Jetson TK1   Andreas Färber
• [U-Boot] [PATCH v2] efi_loader: Add debug output for efi_add_memory_map()   Andreas Färber
• [U-Boot] [PATCH v2] efi_loader: Add debug output for efi_add_memory_map()   Andreas Färber
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Andreas Färber
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Andreas Färber
• [U-Boot] [PATCH v3 1/5] dts: add support for rkchichip rk3399 soc   Andreas Färber
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Andreas Färber
• [U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support   Andreas Färber
• [U-Boot] [PATCH 1/2] dts: Import rk3368-geekbox.dts   Andreas Färber
• [U-Boot] [PATCH 2/2] ARM64: rockchip: Add initial support for RK3368 based GeekBox   Andreas Färber
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Andreas Färber
• [U-Boot] [PATCH 2/2] ARM64: rockchip: Add initial support for RK3368 based GeekBox   Andreas Färber
• [U-Boot] [PATCH v4 1/4] dts: add support for Rockchip rk3399 soc   Andreas Färber
• [U-Boot] [PATCH v4 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Andreas Färber
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Andreas Färber
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Andreas Färber
• [U-Boot] [PATCH 2/2] ARM64: rockchip: Add initial support for RK3368 based GeekBox   Andreas Färber
• [U-Boot] [PATCH v5 1/4] dts: add support for Rockchip rk3399 soc   Andreas Färber
• [U-Boot] [PATCH V3] net: NFS: Add NFSv3 support   Guillaume GARDET
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Beniamino Galvani
• [U-Boot] [PATCH V2] net: NFS: Add NFSv3 support   Guillaume Gardet
• [U-Boot] [PATCH 0/3] Enable SECURE BOOT in SPL framework   Sumit Garg
• [U-Boot] [PATCH 0/3] Enable SECURE BOOT in SPL framework   Sumit Garg
• [U-Boot] [PATCH 1/3] powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL   Sumit Garg
• [U-Boot] [PATCH 2/3] powerpc/mpc85xx: T104x: Add nand secure boot target   Sumit Garg
• [U-Boot] [PATCH 3/3] doc: SPL: Add README for secure boot support   Sumit Garg
• [U-Boot] [PATCH] crypto/fsl: Update blob cmd to accept 64bit addresses   Sumit Garg
• [U-Boot] [PATCH 2/4] SECURE_BOOT: Enable chain of trust in SPL framework   Sumit Garg
• [U-Boot] [PATCH v4 06/13] libfdt: Add max phandle retrieval function   David Gibson
• [U-Boot] [PATCH v4 07/13] libfdt: Fix separator spelling   David Gibson
• [U-Boot] [PATCH v4 08/13] libfdt: Add fdt_path_offset_namelen   David Gibson
• [U-Boot] [PATCH v4 09/13] libfdt: Add fdt_getprop_namelen_w   David Gibson
• [U-Boot] [PATCH v4 09/13] libfdt: Add fdt_getprop_namelen_w   David Gibson
• [U-Boot] [PATCH 2/4] usb: dwc2-otg: redefine fifo-size for rk3288   Simon Glass
• [U-Boot] [PATCH 00/14] mkimage: Tidy up error handling   Simon Glass
• [U-Boot] Brotli Compression to Fit Image/bzImage   Simon Glass
• [U-Boot] Missing maintainers[Involving remittance information, please pay attention to the safety of property]   Simon Glass
• [U-Boot] [PATCH] MMC: Do not write to mmc_uclass_priv if it was not allocated   Simon Glass
• [U-Boot] [PATCH 00/14] mkimage: Tidy up error handling   Simon Glass
• [U-Boot] [PATCH 00/14] test/py: Convert vboot tests to use the test/py framework   Simon Glass
• [U-Boot] [PATCH 01/14] test: Add a README   Simon Glass
• [U-Boot] [PATCH 02/14] test: Add a simple script to run tests on sandbox   Simon Glass
• [U-Boot] [PATCH 03/14] sandbox: Don't exit when bootm completes   Simon Glass
• [U-Boot] [PATCH 04/14] test/py: Allow tests to control the sandbox device-tree file   Simon Glass
• [U-Boot] [PATCH 05/14] test/py: Allow RunAndLog() to return the output   Simon Glass
• [U-Boot] [PATCH 06/14] test/py: Provide output from exceptions with RunAndLog()   Simon Glass
• [U-Boot] [PATCH 07/14] test/py: Return output from run_and_log()   Simon Glass
• [U-Boot] [PATCH 08/14] test/py: Add an option to execute a string containing a command   Simon Glass
• [U-Boot] [PATCH 09/14] test/py: Provide a way to check that a command fails   Simon Glass
• [U-Boot] [PATCH 10/14] test/py: Add a helper to run a list of U-Boot commands   Simon Glass
• [U-Boot] [PATCH 11/14] tools: Add an error code when fit_handle_file() fails   Simon Glass
• [U-Boot] [PATCH 12/14] tools: Correct error handling in fit_image_process_hash()   Simon Glass
• [U-Boot] [PATCH 13/14] test/py: Fix up after the rename of CONFIG_SYS_HUSH_PARSER   Simon Glass
• [U-Boot] [PATCH 14/14] test: Convert the vboot test to test/py   Simon Glass
• [U-Boot] [PATCH 00/11] buildman: Make the tool friendlier for first-time users   Simon Glass
• [U-Boot] [PATCH 01/11] buildman: Tidy up the README a little   Simon Glass
• [U-Boot] [PATCH 02/11] buildman: Automatically create a config file if needed   Simon Glass
• [U-Boot] [PATCH 03/11] buildman: Fix the 'help' test to use the correct path   Simon Glass
• [U-Boot] [PATCH 04/11] buildman: Allow the toolchain error to be suppressed   Simon Glass
• [U-Boot] [PATCH 05/11] buildman: Improve the toolchain progress/error output   Simon Glass
• [U-Boot] [PATCH 06/11] buildman: Fix a typo in TestSettingsHasPath()   Simon Glass
• [U-Boot] [PATCH 07/11] buildman: Drop the toolchain error when downloading toolchains   Simon Glass
• [U-Boot] [PATCH 08/11] buildman: Avoid overwriting existing toolchain entries   Simon Glass
• [U-Boot] [PATCH 09/11] buildman: Add a quick-start note   Simon Glass
• [U-Boot] [PATCH 10/11] Drop the MAKEALL tool   Simon Glass
• [U-Boot] [PATCH 11/11] Drop references to MAKEALL in the documentation   Simon Glass
• [U-Boot] [PATCH] SPL: sunxi: don't force .BSS into DRAM   Simon Glass
• [U-Boot] [PATCH] splash: Accommodate DM_USB in splash_init_usb()   Simon Glass
• [U-Boot] [PATCH 01/14] test: Add a README   Simon Glass
• [U-Boot] [PATCH 01/27] dm: mmc: dwmmc: Add comments to the dwmmc setup functions   Simon Glass
• [U-Boot] [PATCH 1/2] usb: dm: Add a usb_for_each_root_dev() helper function   Simon Glass
• [U-Boot] [PATCH 2/2] usb: dm: Make "usb info" use usb_for_each_root_dev()   Simon Glass
• [U-Boot] [PATCH 1/9] dm: imx: serial: Support DTE mode when using driver model   Simon Glass
• [U-Boot] [PATCH 4/9] mx7: set soc environment according to exact SoC type   Simon Glass
• [U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support   Simon Glass
• [U-Boot] [PATCH 14/14] test: Convert the vboot test to test/py   Simon Glass
• [U-Boot] [PATCH 01/27] dm: mmc: dwmmc: Add comments to the dwmmc setup functions   Simon Glass
• [U-Boot] [PATCH 02/27] rockchip: Use 'select' instead of defaults in Kconfig   Simon Glass
• [U-Boot] [PATCH 03/27] mmc: Add function declarations for mmc_bread() and mmc_switch_part()   Simon Glass
• [U-Boot] [PATCH 04/27] dm: mmc: Move CONFIG_BLK code into the mmc uclass   Simon Glass
• [U-Boot] [PATCH 05/27] dm: mmc: Move non-CONFIG_BLK code into mmc_legacy.c   Simon Glass
• [U-Boot] [PATCH 06/27] mmc: Move MMC boot code into its own file   Simon Glass
• [U-Boot] [PATCH 07/27] dm: mmc: rockchip: Support only CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH 08/27] mmc: Move tracing code into separate functions   Simon Glass
• [U-Boot] [PATCH 09/27] rockchip: Disable CONFIG_SDHCI   Simon Glass
• [U-Boot] [PATCH 10/27] dm: mmc: Add a way to use driver model for MMC operations   Simon Glass
• [U-Boot] [PATCH 11/27] dm: mmc: dwmmc: Support CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 12/27] dm: mmc: rockchip: Enable CONFIG_DM_MMC_OPS for all boards   Simon Glass
• [U-Boot] [PATCH 13/27] rockchip: Add MAINTAINER files for kylin_rk3036, evb_rk3036   Simon Glass
• [U-Boot] [PATCH 14/27] dm: sandbox: Convert to use CONFIG_CMD_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 15/27] dm: mmc: sdhci: Refactor configuration setup to support DM   Simon Glass
• [U-Boot] [PATCH 16/27] dm: mmc: sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 17/27] dm: mmc: msm_sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 18/27] dm: mmc: Move dragonboard410c to use CONFIG_BLK and CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 19/27] dm: mmc: msmsdhic: Drop old MMC code   Simon Glass
• [U-Boot] [PATCH 20/27] dm: spl: mmc: Support CONFIG_BLK in SPL MMC   Simon Glass
• [U-Boot] [PATCH 21/27] dm: dfu: mmc: Support CONFIG_BLK in DFU for MMC   Simon Glass
• [U-Boot] [RESEND] common: block: fix compiler error with CONFIG_FASTBOOT_FLASH_MMC_DEV   Simon Glass
• [U-Boot] [PATCH v2] dm: gpio: MPC85XX GPIO platform data support   Simon Glass
• [U-Boot] [PATCH v3 1/5] x86: fdt: Drop the unused compatible strings in fdtdec   Simon Glass
• [U-Boot] [PATCH v3 2/5] fdt: Drop unused exynos compatible strings   Simon Glass
• [U-Boot] [PATCH v3 3/5] fdt: Add a note to avoid adding new compatible strings   Simon Glass
• [U-Boot] [PATCH v3 4/5] fdt: x86: Tidy up a few COMPAT string definitions   Simon Glass
• [U-Boot] [PATCH v3 5/5] sandbox: Find keyboard driver using driver model   Simon Glass
• [U-Boot] [PATCH] dm: Sort the uclass id in alphabetical order   Simon Glass
• [U-Boot] [PATCH v2 1/5] tools: patman: Use cover_match for 'Cover-letter'   Simon Glass
• [U-Boot] [PATCH v2 2/5] tools: patman: Handle tag sections without an 'END'   Simon Glass
• [U-Boot] [PATCH v2 3/5] tools: patman: Generate cover letter correctly when 'END' is missing   Simon Glass
• [U-Boot] [PATCH v2 4/5] tools: patman: Handle missing blank line for 'Series-changes'   Simon Glass
• [U-Boot] [PATCH v2 5/5] tools: patman: Handle missing 'END' in non-last commit of a series   Simon Glass
• [U-Boot] Logging SPL output with test/py   Simon Glass
• [U-Boot] Logging SPL output with test/py   Simon Glass
• [U-Boot] [PATCH] net: rtl8169: Fix return value for rtl_send_common   Simon Glass
• [U-Boot] [PATCH] net: rtl8169: Fix return value for rtl_send_common   Simon Glass
• [U-Boot] [PATCH v3 00/62] dm: rockchip: sandbox: Add support for compiled-in platform data   Simon Glass
• [U-Boot] [PATCH v3 01/62] sandbox: Don't print a warning for CONFIG_I2C_COMPAT   Simon Glass
• [U-Boot] [PATCH v3 02/62] README: Remove CONFIG_SYS_MALLOC_F_LEN comment   Simon Glass
• [U-Boot] [PATCH v3 03/62] spl: Drop include of i2c.h   Simon Glass
• [U-Boot] [PATCH v3 04/62] Makefile: Allow the SPL final link rule to be overridden   Simon Glass
• [U-Boot] [PATCH v3 05/62] sandbox: Allow chaining from SPL to U-Boot proper   Simon Glass
• [U-Boot] [PATCH v3 06/62] sandbox: Support building an SPL image   Simon Glass
• [U-Boot] [PATCH v3 07/62] sandbox: Correct header file order in cpu.c   Simon Glass
• [U-Boot] [PATCH v3 08/62] sandbox: Add some missing headers in cpu.c   Simon Glass
• [U-Boot] [PATCH v3 09/62] sandbox: Don't use PCI in SPL   Simon Glass
• [U-Boot] [PATCH v3 10/62] sandbox: Don't include the main loop in SPL   Simon Glass
• [U-Boot] [PATCH v3 11/62] sandbox: Add basic SPL implementation   Simon Glass
• [U-Boot] [PATCH v3 12/62] sandbox: Don't use IDE and iotrace in SPL   Simon Glass
• [U-Boot] [PATCH v3 13/62] sandbox: serial: Don't sync video in SPL   Simon Glass
• [U-Boot] [PATCH v3 14/62] sandbox: Add a new sandbox_spl board   Simon Glass
• [U-Boot] [PATCH v3 15/62] sandbox: Add a test device that uses of-platdata   Simon Glass
• [U-Boot] [PATCH v3 16/62] dm: spl: Don't set up device tree with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 17/62] dm: Makefile: Build of-platdata before SPL   Simon Glass
• [U-Boot] [PATCH v3 18/62] dm: core: Don't use device tree with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 19/62] dm: regmap: Add a dummy implementation for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 20/62] dm: syscon: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 21/62] dm: sandbox: Add a simple driver to test of-platdata   Simon Glass
• [U-Boot] [PATCH v3 22/62] dm: Add a header that provides access to the of-platdata structs   Simon Glass
• [U-Boot] [PATCH v3 23/62] dm: clk: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 24/62] dm: serial: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 25/62] dm: Don't include fdtdec functions when of-platdata is enabled   Simon Glass
• [U-Boot] [PATCH v3 26/62] dm: Add an option to enable the of-platdata feature   Simon Glass
• [U-Boot] [PATCH v3 27/62] dm: Add a README for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 28/62] dm: Add a library to provide simple device-tree access   Simon Glass
• [U-Boot] [PATCH v3 29/62] dm: Add a tool to generate C code from a device tree   Simon Glass
• [U-Boot] [PATCH v3 30/62] dm: Makefile: Build of-platdata files when the feature is enabled   Simon Glass
• [U-Boot] [PATCH v3 31/62] dm: Add a more efficient libfdt library   Simon Glass
• [U-Boot] [PATCH v3 32/62] Only build the libfdt python module if 'swig' is available   Simon Glass
• [U-Boot] [PATCH v3 33/62] tiny-printf: Support assert()   Simon Glass
• [U-Boot] [PATCH v3 34/62] dm: spl: Bind in all devices in SPL with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 35/62] dm: core: Rename DM_NAME_ALLOCED to DM_FLAG_NAME_ALLOCED   Simon Glass
• [U-Boot] [PATCH v3 36/62] dtoc: Ignore the u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] [PATCH v3 37/62] dm: Don't attach the device tree to SPL with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 38/62] dm: core: Expand platdata for of-platdata devices   Simon Glass
• [U-Boot] [PATCH v3 39/62] sandbox: Don't bring in the eeprom emulator in SPL   Simon Glass
• [U-Boot] [PATCH v3 40/62] dm: sandbox: Enable of-platdata for sandbox_spl   Simon Glass
• [U-Boot] [PATCH v3 41/62] dm: core: Move regmap allocation into a separate function   Simon Glass
• [U-Boot] [PATCH v3 42/62] dm: core: Add an implementation of regmap_init_mem_platdata()   Simon Glass
• [U-Boot] [PATCH v3 43/62] dm: serial: ns16550: Update to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 44/62] rockchip: serial: Add an of-platdata driver for rockchip   Simon Glass
• [U-Boot] [PATCH v3 45/62] rockchip: Update the sdram-channel property to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 46/62] rockchip: mmc: Move all DT decoding to ofdata_to_platdata()   Simon Glass
• [U-Boot] [PATCH v3 47/62] rockchip: mmc: Update the driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 48/62] rockchip: clk: Move all DT decoding to ofdata_to_platdata()   Simon Glass
• [U-Boot] [PATCH v3 49/62] rockchip: clk: Update the rk3288 driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 50/62] rockchip: pinctrl: Update the rk3288 driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 51/62] rockchip: Move the MMC setup check earlier   Simon Glass
• [U-Boot] [PATCH v3 52/62] rockchip: Don't use spl_boot_device() with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 53/62] rockchip: syscon: Update to work with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 54/62] rockchip: sdram: Move all DT decoding to ofdata_to_platdata()   Simon Glass
• [U-Boot] [PATCH v3 55/62] rockchip: sdram: Update the driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 56/62] rockchip: Use of-platdata for firefly-rk3288   Simon Glass
• [U-Boot] [PATCH v3 57/62] test/py: Handle testing with the sandbox_spl board   Simon Glass
• [U-Boot] [PATCH v3 58/62] test/py: Note which console produced unexpected output   Simon Glass
• [U-Boot] [PATCH v3 59/62] test/py: Provide a way to get early console output   Simon Glass
• [U-Boot] [PATCH v3 60/62] test/py: Start sandbox SPL when enabled   Simon Glass
• [U-Boot] [PATCH v3 61/62] dm: Add a test for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 62/62] dm: Update the of-platdata README for the new features   Simon Glass
• [U-Boot] [PATCH] RFC: rockchip: video: Lower hpd wait time   Simon Glass
• [U-Boot] Please pull u-boot-rockchip   Simon Glass
• [U-Boot] [PATCH 22/27] net: phy: marvell: Add a missing errno.h header   Simon Glass
• [U-Boot] Logging SPL output with test/py   Simon Glass
• [U-Boot] [PATCH v2 00/13] dm: mmc: Add driver-model support for MMC operations   Simon Glass
• [U-Boot] [PATCH v2 01/13] dm: core: Add a function to bind child devices   Simon Glass
• [U-Boot] [PATCH v2 02/13] dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()   Simon Glass
• [U-Boot] [PATCH v2 03/13] dm: Use dm_scan_fdt_dev() directly where possible   Simon Glass
• [U-Boot] [PATCH v2 04/13] arm: Show early-malloc() usage in bdinfo   Simon Glass
• [U-Boot] [PATCH v2 05/13] net: phy: marvell: Add a missing errno.h header   Simon Glass
• [U-Boot] [PATCH v2 06/13] zynq: Increase the early malloc() size   Simon Glass
• [U-Boot] [PATCH v2 07/13] dm: zynq: usb: Convert to CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH v2 08/13] dm: mmc: zynq: Convert zynq to use driver model for MMC   Simon Glass
• [U-Boot] [PATCH v2 09/13] dm: socfpga: mmc: Support CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH v2 10/13] dm: usb: Use blk_dread/write() instead of direct calls   Simon Glass
• [U-Boot] [PATCH v2 11/13] dm: spl: mmc: Support raw partitions with CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH v2 12/13] dm: mmc: Enable DM_MMC_OPS by default with DM_MMC   Simon Glass
• [U-Boot] [PATCH v2 13/13] dm: blk: Enable CONFIG_BLK if DM_MMC is enabled   Simon Glass
• [U-Boot] mkimage can't read .tmp   Simon Glass
• [U-Boot] [RESEND PATCH v5 01/12] dm: core: implement dev_map_phsymem()   Simon Glass
• [U-Boot] [PATCH 2/2] dm: mmc: dwmmc: use the callback functions as static   Simon Glass
• [U-Boot] DMA driver for PL330   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v2] SPL: tiny-printf: avoid any BSS usage   Simon Glass
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Simon Glass
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Simon Glass
• [U-Boot] [RESEND PATCH] rockchip: add basic support for evb-rk3288 board   Simon Glass
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Simon Glass
• [U-Boot] [PATCH 1/4] tools/env: return with error if redundant environments have unequal size   Simon Glass
• [U-Boot] [PATCH 2/4] tools/env: javadoc for fw_printenv, fw_getenv and fw_parse_script   Simon Glass
• [U-Boot] [PATCH 3/4] tools/env: move envmatch further up in file to avoid forward declarations   Simon Glass
• [U-Boot] [PATCH] x86: link: Correct a failure in DRAM init   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v3 00/62] dm: rockchip: sandbox: Add support for compiled-in platform data   Simon Glass
• [U-Boot] [PATCH v3] rockchip: rk3288: Change method of loading u-boot   Simon Glass
• [U-Boot] [PATCH v3] rockchip: rk3288: Change method of loading u-boot   Simon Glass
• [U-Boot] [PATCH v2] rockchip: add basic support for evb-rk3288 board   Simon Glass
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Simon Glass
• [U-Boot] [PATCH v3 0/4] rockchip: rk3288: add fastboot support   Simon Glass
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Simon Glass
• [U-Boot] storage support for ub_dev_write API function   Simon Glass
• [U-Boot] [RESEND PATCH] board: move all the rockchip board in one folder   Simon Glass
• [U-Boot] [PATCH v3] rockchip: rk3288: Change method of loading u-boot   Simon Glass
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Simon Glass
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Simon Glass
• [U-Boot] [PATCH v5] rockchip: add option to change method of loading u-boot   Simon Glass
• [U-Boot] Support for GPIO in U-boot for Intel Edison   Simon Glass
• [U-Boot] Avoiding overwriting FDT from FIT image   Simon Glass
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: bcm283x: Implement EFI RTS reset_system   Simon Glass
• [U-Boot] How to support ATF on u-boot   Simon Glass
• [U-Boot] [PATCH 1/8] xtensa: add support for the xtensa processor architecture [1/2]   Simon Glass
• [U-Boot] [PATCH 2/8] xtensa: add support for the xtensa processor architecture [2/2]   Simon Glass
• [U-Boot] [PATCH 3/8] xtensa: add core information for the dc232b processor   Simon Glass
• [U-Boot] [PATCH 4/8] xtensa: add core information for the dc233c processor   Simon Glass
• [U-Boot] [PATCH 5/8] xtensa: add core information for the de212 processor   Simon Glass
• [U-Boot] [PATCH 6/8] net/ethoc: support private memory configurations   Simon Glass
• [U-Boot] [PATCH 7/8] net/ethoc: don't advertise gigabit on the connected PHY   Simon Glass
• [U-Boot] [PATCH 8/8] xtensa: add support for the 'xtfpga' evaluation board   Simon Glass
• [U-Boot] [PATCH] dm: mmc: Add the function for getting current device number   Simon Glass
• [U-Boot] [PATCH v2 08/13] dm: mmc: zynq: Convert zynq to use driver model for MMC   Simon Glass
• [U-Boot] [PATCH v2 2/4] fdt_support: define stub for fdt_fixup_mtdparts   Simon Glass
• [U-Boot] [PATCH v3 0/9] Secure Boot by Authenticating/Decrypting SPL FIT blobs   Simon Glass
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Simon Glass
• [U-Boot] [PATCH 2/8] xtensa: add support for the xtensa processor architecture [2/2]   Simon Glass
• [U-Boot] [PATCH 3/8] xtensa: add core information for the dc232b processor   Simon Glass
• [U-Boot] [PATCH 6/8] net/ethoc: support private memory configurations   Simon Glass
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Simon Glass
• [U-Boot] [RFC PATCH 2/7] net: dm: Ignore unknown env_op_* constants   Simon Glass
• [U-Boot] [PATCH] armv8: spl: Call board_init_r from crt0_64 in SPL   Simon Glass
• [U-Boot] xHCI on x86   Simon Glass
• [U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support   Simon Glass
• [U-Boot] [PATCH v5] rockchip: add option to change method of loading u-boot   Simon Glass
• [U-Boot] [PATCH] rockchip: Clean up CPU selection   Simon Glass
• [U-Boot] [PATCH] rockchip: Exclude rk_timer for ARM64   Simon Glass
• [U-Boot] [PATCH 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Simon Glass
• [U-Boot] [PATCH 3/5] config: add config file for evb-rk3399   Simon Glass
• [U-Boot] [PATCH 4/5] mmc: rockchip: add SDHCI driver support for rockchip soc   Simon Glass
• [U-Boot] [PATCH 1/5] dts: add support for rkchichip rk3399 soc   Simon Glass
• [U-Boot] [PATCH 0/5]   Simon Glass
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Simon Glass
• [U-Boot] [PATCH v4 1/4] usb: rockchip-phy: implement USB2.0 phy control   Simon Glass
• [U-Boot] [PATCH v4 2/4] usb: dwc2-otg: adjust fifo size via platform data   Simon Glass
• [U-Boot] [PATCH v4 4/4] usb: dwc2 : invalidate dcache before starting DMA   Simon Glass
• [U-Boot] [PATCH v4.1 3/4] rockchip: rk3288: add fastboot support   Simon Glass
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Simon Glass
• [U-Boot] [PATCH] rockchip: Clean up CPU selection   Simon Glass
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Simon Glass
• [U-Boot] [PATCH] rockchip: Exclude rk_timer for ARM64   Simon Glass
• [U-Boot] [PATCH v4 1/4] usb: rockchip-phy: implement USB2.0 phy control   Simon Glass
• [U-Boot] [PATCH v4 2/4] usb: dwc2-otg: adjust fifo size via platform data   Simon Glass
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Simon Glass
• [U-Boot] [PATCH v4 4/4] usb: dwc2 : invalidate dcache before starting DMA   Simon Glass
• [U-Boot] [PATCH v3 01/62] sandbox: Don't print a warning for CONFIG_I2C_COMPAT   Simon Glass
• [U-Boot] [PATCH v3 02/62] README: Remove CONFIG_SYS_MALLOC_F_LEN comment   Simon Glass
• [U-Boot] [PATCH v3 03/62] spl: Drop include of i2c.h   Simon Glass
• [U-Boot] [PATCH v3 04/62] Makefile: Allow the SPL final link rule to be overridden   Simon Glass
• [U-Boot] [PATCH v3 05/62] sandbox: Allow chaining from SPL to U-Boot proper   Simon Glass
• [U-Boot] [PATCH v3 06/62] sandbox: Support building an SPL image   Simon Glass
• [U-Boot] [PATCH v3 07/62] sandbox: Correct header file order in cpu.c   Simon Glass
• [U-Boot] [PATCH v3 08/62] sandbox: Add some missing headers in cpu.c   Simon Glass
• [U-Boot] [PATCH v3 09/62] sandbox: Don't use PCI in SPL   Simon Glass
• [U-Boot] [PATCH v3 10/62] sandbox: Don't include the main loop in SPL   Simon Glass
• [U-Boot] [PATCH v3 11/62] sandbox: Add basic SPL implementation   Simon Glass
• [U-Boot] [PATCH v3 12/62] sandbox: Don't use IDE and iotrace in SPL   Simon Glass
• [U-Boot] [PATCH v3 13/62] sandbox: serial: Don't sync video in SPL   Simon Glass
• [U-Boot] [PATCH v3 14/62] sandbox: Add a new sandbox_spl board   Simon Glass
• [U-Boot] [PATCH v3 15/62] sandbox: Add a test device that uses of-platdata   Simon Glass
• [U-Boot] [PATCH v3 16/62] dm: spl: Don't set up device tree with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 17/62] dm: Makefile: Build of-platdata before SPL   Simon Glass
• [U-Boot] [PATCH v3 18/62] dm: core: Don't use device tree with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 19/62] dm: regmap: Add a dummy implementation for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 20/62] dm: syscon: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 21/62] dm: sandbox: Add a simple driver to test of-platdata   Simon Glass
• [U-Boot] [PATCH v3 22/62] dm: Add a header that provides access to the of-platdata structs   Simon Glass
• [U-Boot] [PATCH v3 23/62] dm: clk: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 24/62] dm: serial: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 25/62] dm: Don't include fdtdec functions when of-platdata is enabled   Simon Glass
• [U-Boot] [PATCH v3 26/62] dm: Add an option to enable the of-platdata feature   Simon Glass
• [U-Boot] [PATCH v3 27/62] dm: Add a README for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 28/62] dm: Add a library to provide simple device-tree access   Simon Glass
• [U-Boot] [PATCH v3 29/62] dm: Add a tool to generate C code from a device tree   Simon Glass
• [U-Boot] [PATCH v3 30/62] dm: Makefile: Build of-platdata files when the feature is enabled   Simon Glass
• [U-Boot] [PATCH v3 31/62] dm: Add a more efficient libfdt library   Simon Glass
• [U-Boot] [PATCH v3 32/62] Only build the libfdt python module if 'swig' is available   Simon Glass
• [U-Boot] [PATCH v3 33/62] tiny-printf: Support assert()   Simon Glass
• [U-Boot] [PATCH v3 34/62] dm: spl: Bind in all devices in SPL with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 35/62] dm: core: Rename DM_NAME_ALLOCED to DM_FLAG_NAME_ALLOCED   Simon Glass
• [U-Boot] [PATCH v3 36/62] dtoc: Ignore the u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] [PATCH v3 37/62] dm: Don't attach the device tree to SPL with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 38/62] dm: core: Expand platdata for of-platdata devices   Simon Glass
• [U-Boot] [PATCH v3 39/62] sandbox: Don't bring in the eeprom emulator in SPL   Simon Glass
• [U-Boot] [PATCH v3 40/62] dm: sandbox: Enable of-platdata for sandbox_spl   Simon Glass
• [U-Boot] [PATCH v3 41/62] dm: core: Move regmap allocation into a separate function   Simon Glass
• [U-Boot] [PATCH v3 42/62] dm: core: Add an implementation of regmap_init_mem_platdata()   Simon Glass
• [U-Boot] [PATCH v3 43/62] dm: serial: ns16550: Update to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 44/62] rockchip: serial: Add an of-platdata driver for rockchip   Simon Glass
• [U-Boot] [PATCH v3 45/62] rockchip: Update the sdram-channel property to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 46/62] rockchip: mmc: Move all DT decoding to ofdata_to_platdata()   Simon Glass
• [U-Boot] [PATCH v3 47/62] rockchip: mmc: Update the driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 48/62] rockchip: clk: Move all DT decoding to ofdata_to_platdata()   Simon Glass
• [U-Boot] [PATCH v3 49/62] rockchip: clk: Update the rk3288 driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 50/62] rockchip: pinctrl: Update the rk3288 driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 51/62] rockchip: Move the MMC setup check earlier   Simon Glass
• [U-Boot] [PATCH v3 52/62] rockchip: Don't use spl_boot_device() with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 53/62] rockchip: syscon: Update to work with of-platdata   Simon Glass
• [U-Boot] [PATCH v3 54/62] rockchip: sdram: Move all DT decoding to ofdata_to_platdata()   Simon Glass
• [U-Boot] [PATCH v3 55/62] rockchip: sdram: Update the driver to support of-platdata   Simon Glass
• [U-Boot] [PATCH v3 56/62] rockchip: Use of-platdata for firefly-rk3288   Simon Glass
• [U-Boot] [PATCH v3 57/62] test/py: Handle testing with the sandbox_spl board   Simon Glass
• [U-Boot] [PATCH v3 59/62] test/py: Provide a way to get early console output   Simon Glass
• [U-Boot] [PATCH v3 60/62] test/py: Start sandbox SPL when enabled   Simon Glass
• [U-Boot] [PATCH v3 61/62] dm: Add a test for of-platdata   Simon Glass
• [U-Boot] [PATCH v3 62/62] dm: Update the of-platdata README for the new features   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] Add a power domain framework/uclass   Simon Glass
• [U-Boot] [PATCH v4.1 3/4] rockchip: rk3288: add fastboot support   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v4 2/4] usb: dwc2-otg: adjust fifo size via platform data   Simon Glass
• [U-Boot] [PATCH v4.1 3/4] rockchip: rk3288: add fastboot support   Simon Glass
• [U-Boot] [PATCH] test: Adjust the of-platdata test run condition   Simon Glass
• [U-Boot] [PATCH 1/3] x86: Mention how to boot a 64-bit kernel from U-Boot   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Add a reference to README.efi   Simon Glass
• [U-Boot] [PATCH 3/3] x86: Mention running U-Boot in 64-bit mode in the README   Simon Glass
• [U-Boot] Running u-boot on a x86 board   Simon Glass
• [U-Boot] [PATCH 2/4] tools/env: javadoc for fw_printenv, fw_getenv and fw_parse_script   Simon Glass
• [U-Boot] [PATCH 1/2] x86: Add DFI BT700 BayTrail board support   Simon Glass
• [U-Boot] [PATCH 2/2] x86: Add theadorable-x86-dfi-bt700 board support   Simon Glass
• [U-Boot] [PATCH 3/3] doc: SPL: Add README for secure boot support   Simon Glass
• [U-Boot] [PATCH 1/3] powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL   Simon Glass
• [U-Boot] [PATCH 2/3] serial: zynq: Read information about clock from DT   Simon Glass
• [U-Boot] [PATCH] spl: Fix compilation warnings for arm64   Simon Glass
• [U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option   Simon Glass
• [U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support   Simon Glass
• [U-Boot] [PATCH v2] rockchip: sdram: Fix register layout for Linux   Simon Glass
• [U-Boot] [PATCH v3 1/5] dts: add support for rkchichip rk3399 soc   Simon Glass
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Simon Glass
• [U-Boot] [PATCH v3 3/5] config: add config file for evb-rk3399   Simon Glass
• [U-Boot] [PATCH v3 4/5] mmc: rockchip: add SDHCI driver support for rockchip soc   Simon Glass
• [U-Boot] [PATCH 1/9] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Simon Glass
• [U-Boot] [PATCH 2/9] cosmetic: rockchip: rk3036: pinctrl: fix config symbol naming   Simon Glass
• [U-Boot] [PATCH 3/9] cosmetic: rockchip: sort socs according to numbers   Simon Glass
• [U-Boot] [PATCH 4/9] cosmetic: rockchip: rk3288: rename rkclk_configure_cpu   Simon Glass
• [U-Boot] [PATCH 5/9] rockchip: rk3288: fix FREF_MIN_HZ constant   Simon Glass
• [U-Boot] [PATCH 6/9] rockchip: rk3188: Add header files for PMU and GRF   Simon Glass
• [U-Boot] [PATCH 7/9] rockchip: rk3188: Add pinctrl driver   Simon Glass
• [U-Boot] [PATCH 8/9] rockchip: rk3188: Bring in rk3066/rk3188 clock bindings   Simon Glass
• [U-Boot] [PATCH 9/9] rockchip: rk3188: Add clock driver   Simon Glass
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Simon Glass
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] dm: clk: Remove simple version of clk_get_by_index()   Simon Glass
• [U-Boot] MinnowBoard Turbot U-boot is in 64-bit mode or 32-bit mode   Simon Glass
• [U-Boot] MPC8347 Initial Boot problems   Simon Glass
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Simon Glass
• [U-Boot] [PATCH 9/9] rockchip: rk3188: Add clock driver   Simon Glass
• [U-Boot] [PATCH 7/9] rockchip: rk3188: Add pinctrl driver   Simon Glass
• [U-Boot] [PATCH v2 01/13] dm: core: Add a function to bind child devices   Simon Glass
• [U-Boot] [PATCH v2 02/13] dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()   Simon Glass
• [U-Boot] [PATCH v2 03/13] dm: Use dm_scan_fdt_dev() directly where possible   Simon Glass
• [U-Boot] [PATCH v2 04/13] arm: Show early-malloc() usage in bdinfo   Simon Glass
• [U-Boot] [PATCH v2 05/13] net: phy: marvell: Add a missing errno.h header   Simon Glass
• [U-Boot] [PATCH v2 06/13] zynq: Increase the early malloc() size   Simon Glass
• [U-Boot] [PATCH v2 07/13] dm: zynq: usb: Convert to CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH v2 09/13] dm: socfpga: mmc: Support CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH v2 10/13] dm: usb: Use blk_dread/write() instead of direct calls   Simon Glass
• [U-Boot] [PATCH v2 11/13] dm: spl: mmc: Support raw partitions with CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH v2 12/13] dm: mmc: Enable DM_MMC_OPS by default with DM_MMC   Simon Glass
• [U-Boot] [PATCH v2 13/13] dm: blk: Enable CONFIG_BLK if DM_MMC is enabled   Simon Glass
• [U-Boot] [PATCH 1/4] dm: clk: Add a way to find a clock by its driver   Simon Glass
• [U-Boot] [PATCH 2/4] rockchip: Add a way to obtain the main clock device   Simon Glass
• [U-Boot] [PATCH 3/4] rockchip: Use rockchip_get_clk() to obtain the SoC clock   Simon Glass
• [U-Boot] [PATCH 4/4] rockchip: rk3288: Move rockchip_get_cru() out of the driver   Simon Glass
• [U-Boot] [PATCH v2] dm: clk: Remove simple version of clk_get_by_index/name()   Simon Glass
• [U-Boot] [PATCH] serial: ns16550: Add support for the BayTrail internal HS UART   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Add a reference to README.efi   Simon Glass
• [U-Boot] [PATCH] mmc-uclass: correct the device number   Simon Glass
• [U-Boot] [PATCH 1/2] dts: Import rk3368-geekbox.dts   Simon Glass
• [U-Boot] [PATCH 2/2] ARM64: rockchip: Add initial support for RK3368 based GeekBox   Simon Glass
• [U-Boot] [PATCH v2] mkimage: rockchip: add suport for rk33 serial   Simon Glass
• [U-Boot] [PATCH] rockchip: update fastboot usage   Simon Glass
• [U-Boot] [PATCH v4 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Simon Glass
• [U-Boot] [PATCH v4 3/4] config: add config file for evb-rk3399   Simon Glass
• [U-Boot] [PATCH v4 4/4] ARM64: evb-rk3399: add a README for this board setup   Simon Glass
• [U-Boot] [PATCH] mmc: rockchip: add SDHCI driver support for rockchip soc   Simon Glass
• [U-Boot] [PATCH 1/9] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Simon Glass
• [U-Boot] [PATCH 2/9] cosmetic: rockchip: rk3036: pinctrl: fix config symbol naming   Simon Glass
• [U-Boot] [PATCH 3/9] cosmetic: rockchip: sort socs according to numbers   Simon Glass
• [U-Boot] [PATCH 4/9] cosmetic: rockchip: rk3288: rename rkclk_configure_cpu   Simon Glass
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Simon Glass
• [U-Boot] [PATCH 5/9] rockchip: rk3288: fix FREF_MIN_HZ constant   Simon Glass
• [U-Boot] [PATCH 2/4] rockchip: Add a way to obtain the main clock device   Simon Glass
• [U-Boot] [PATCH 1/4] dm: clk: Add a way to find a clock by its driver   Simon Glass
• [U-Boot] [PATCH 3/4] rockchip: Use rockchip_get_clk() to obtain the SoC clock   Simon Glass
• [U-Boot] [PATCH v2] mkimage: rockchip: add suport for rk33 serial   Simon Glass
• [U-Boot] [PATCH] rockchip: update fastboot usage   Simon Glass
• [U-Boot] [PATCH v4 1/4] dts: add support for Rockchip rk3399 soc   Simon Glass
• [U-Boot] [PATCH v4 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Simon Glass
• [U-Boot] [PATCH v4 3/4] config: add config file for evb-rk3399   Simon Glass
• [U-Boot] [PATCH] mmc: rockchip: add SDHCI driver support for rockchip soc   Simon Glass
• [U-Boot] [PATCH v2] rockchip: sdram: Fix register layout for Linux   Simon Glass
• [U-Boot] [PATCH v4 1/4] dts: add support for Rockchip rk3399 soc   Simon Glass
• [U-Boot] [PATCH 9/9] rockchip: rk3188: Add clock driver   Simon Glass
• [U-Boot] [PATCH] image: fix IH_ARCH_... values for uImage compatibility   Simon Glass
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Simon Glass
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Simon Glass
• [U-Boot] [PATCH 05/14] drivers: i2c: omap24xx_i2c: prepare driver for DM conversion   Simon Glass
• [U-Boot] [PATCH 06/14] drivers: i2c: omap24xx_i2c: adopt omap_i2c driver to driver model   Simon Glass
• [U-Boot] [Urgent Problem] ARM64 Linux fails to boot with initramdisk with uImage header   Simon Glass
• [U-Boot] MPC8347 Initial Boot problems   Simon Glass
• [U-Boot] [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support   Simon Glass
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Simon Glass
• [U-Boot] [PATCH 03/14] drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enable   Simon Glass
• [U-Boot] [PATCH] spl: Fix compilation warnings for arm64   Simon Glass
• [U-Boot] [PATCH v2] mmc: display mmc list information like mmc_legacy type   Simon Glass
• [U-Boot] [PATCH v3] mmc-uclass: correct the device number   Simon Glass
• [U-Boot] [PATCH 1/2] tools: Fix return code of fit_image_process_sig()   Simon Glass
• [U-Boot] [PATCH] WIP: usb: xhci-pci: Add DM support   Simon Glass
• [U-Boot] [PATCH] tpm: atmel_twi: Make compatible with DM I2C busses   Simon Glass
• [U-Boot] [PATCH] rockchip: add a dummy byte for the sdram-channel property   Simon Glass
• [U-Boot] [PATCH] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Simon Glass
• [U-Boot] [PATCH] test/py: use absolute dts path in vboot test   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Simon Glass
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Simon Glass
• [U-Boot] [PATCH 03/14] drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enable   Simon Glass
• [U-Boot] [PATCH 1/5] sandbox: Add instructions about building on 32-bit machines   Simon Glass
• [U-Boot] [PATCH 2/5] lzmadec: Use the same type as the lzma call   Simon Glass
• [U-Boot] [PATCH 3/5] part_efi: Fix compiler warning on 32-bit sandbox   Simon Glass
• [U-Boot] [PATCH 4/5] hashtable: Fix compiler warning on 32-bit sandbox   Simon Glass
• [U-Boot] [PATCH 5/5] dtoc: Correct the type widening code in fdt_fallback   Simon Glass
• [U-Boot] [PATCH v5 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Simon Glass
• [U-Boot] [PATCH v2 1/8] rockchip: move clock drivers into a subdirectory   Simon Glass
• [U-Boot] [PATCH v2 2/8] rockchip: remove log2 reimplementation from clock drivers   Simon Glass
• [U-Boot] [PATCH v2 5/8] rockchip: rk3188: Bring in rk3066/rk3188 clock bindings   Simon Glass
• [U-Boot] [PATCH v2 6/8] rockchip: rk3188: Add clock driver   Simon Glass
• [U-Boot] [PATCH v2 7/8] rockchip: rk3188: add core support   Simon Glass
• [U-Boot] [PATCH v2 8/8] rockchip: rk3188: Radxa Rock board   Simon Glass
• [U-Boot] [PATCH v4] mmc-uclass: correct the device number   Simon Glass
• [U-Boot] [PATCH] ARM: tegra: add IVC protocol implementation   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: tegra: pick up actual memory size   Simon Glass
• [U-Boot] [PATCH v5 3/4] config: add config file for evb-rk3399   Simon Glass
• [U-Boot] [PATCH v5 4/4] ARM64: evb-rk3399: add a README for this board setup   Simon Glass
• [U-Boot] [PATCH v2] configs: rockchip: remove no use MACRO   Simon Glass
• [U-Boot] [PATCH] rockchip: fix rk3036 Kconfig inclusion   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: Fix pinctrl for GPIO bank 0   Simon Glass
• [U-Boot] [PATCH] rockchip: fix rk3036 SPL build   Simon Glass
• [U-Boot] [PATCH 2/2] ARM64: rockchip: Add initial support for RK3368 based GeekBox   Simon Glass
• [U-Boot] [PATCH v5 3/4] config: add config file for evb-rk3399   Simon Glass
• [U-Boot] [PATCH v5 4/4] ARM64: evb-rk3399: add a README for this board setup   Simon Glass
• [U-Boot] [PATCH v3] dm: clk: Remove simple version of clk_get_by_index/name()   Simon Glass
• [U-Boot] [PATCH] Bug in cbfs   Simon Glass
• [U-Boot] [PATCH] rk3399: reseve space for trust   Simon Glass
• [U-Boot] [PATCH] Revert "rockchip: Move the MMC setup check earlier"   Simon Glass
• [U-Boot] [PATCH v2] mmc: display mmc list information like mmc_legacy type   Simon Glass
• [U-Boot] [PATCH 1/3] mmc: dw_mmc: remove the duplicated header file   Simon Glass
• [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: remove the duplcated header file   Simon Glass
• [U-Boot] [PATCH 3/3] mmc: use the generic error number   Simon Glass
• [U-Boot] [PATCH v2 2/2] rsa: Fix return value and masked error   Simon Glass
• [U-Boot] [PATCH] rk3399: reseve space for trust   Simon Glass
• [U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)   Simon Glass
• [U-Boot] [PATCH] Add a power domain framework/uclass   Simon Glass
• [U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option   Simon Glass
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Simon Glass
• [U-Boot] [PATCH] Revert "rockchip: Move the MMC setup check earlier"   Simon Glass
• [U-Boot] [PATCH v3] mmc: display mmc list information like mmc_legacy type   Simon Glass
• [U-Boot] [PATCH] rockchip: remove the duplicated macro config   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: move evb board to rockchip folder   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3036: update MAINTAINER file   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: revise CONFIG_FASTBOOT_BUF_ADDR   Simon Glass
• [U-Boot] [PATCH 00/30] binman: A tool for creating firmware images   Simon Glass
• [U-Boot] [PATCH 01/30] x86: Add debugging when a microcode update fails   Simon Glass
• [U-Boot] [PATCH 02/30] x86: ivybridge: Allow microcode to be collated   Simon Glass
• [U-Boot] [PATCH 03/30] x86: Add debugging when cpu_common_init() fails   Simon Glass
• [U-Boot] [PATCH 04/30] patman: Adjust command.Output() to raise an error by default   Simon Glass
• [U-Boot] [PATCH 05/30] dtoc: Move the struct import into the correct order   Simon Glass
• [U-Boot] [PATCH 06/30] dtoc: Move the fdt library selection into fdt_select   Simon Glass
• [U-Boot] [PATCH 07/30] dtoc: Rename fdt.py to fdt_normal.py   Simon Glass
• [U-Boot] [PATCH 08/30] dtoc: Create a base class for Fdt   Simon Glass
• [U-Boot] [PATCH 09/30] dtoc: Move BytesToValue() and GetEmpty() into PropBase   Simon Glass
• [U-Boot] [PATCH 10/30] dtoc: Move Widen() and GetPhandle() into the base class   Simon Glass
• [U-Boot] [PATCH 11/30] dtoc: Move a few more common functions into fdt.py   Simon Glass
• [U-Boot] [PATCH 12/30] patman: Add a tools library for using temporary files   Simon Glass
• [U-Boot] [PATCH 13/30] patman: Add a library to handle logging and progress   Simon Glass
• [U-Boot] [PATCH 14/30] dtoc: Allow the device tree to be compiled from source   Simon Glass
• [U-Boot] [PATCH 15/30] dtoc: Drop the convert_dash parameter to GetProps()   Simon Glass
• [U-Boot] [PATCH 16/30] dtoc: Prepare for supporting changing of device trees   Simon Glass
• [U-Boot] [PATCH 17/30] dtoc: Move to using bytearray   Simon Glass
• [U-Boot] [PATCH 18/30] dtoc: Support deleting device tree properties   Simon Glass
• [U-Boot] [PATCH 19/30] dtoc: Support packing the device tree   Simon Glass
• [U-Boot] [PATCH 20/30] dtoc: Support finding the offset of a property   Simon Glass
• [U-Boot] [PATCH 21/30] dtoc: Correct quotes in fdt_util   Simon Glass
• [U-Boot] [PATCH 22/30] dtoc: Add methods for reading data from properties   Simon Glass
• [U-Boot] [PATCH 23/30] binman: Introduce binman, a tool for building binary images   Simon Glass
• [U-Boot] [PATCH 24/30] binman: Add basic entry types for U-Boot   Simon Glass
• [U-Boot] [PATCH 25/30] binman: Add support for building x86 ROMs   Simon Glass
• [U-Boot] [PATCH 26/30] binman: Add support for u-boot.img as an input binary   Simon Glass
• [U-Boot] [PATCH 27/30] binman: Add a build rule for binman   Simon Glass
• [U-Boot] [PATCH 28/30] binman: Allow configuration options to be used in .dts files   Simon Glass
• [U-Boot] [PATCH 29/30] RFC: Use binman for a sunxi board   Simon Glass
• [U-Boot] [PATCH 30/30] RFC: Use binman for an x86 board   Simon Glass
• [U-Boot] [PATCH 1/2] sandbox: Migrate CONFIG_I2C_EEPROM   Simon Glass
• [U-Boot] [bug report]cmd: cache: output information   Simon Glass
• [U-Boot] [ANN] U-Boot v2016.09-rc1 released   Simon Glass
• [U-Boot] Please pull u-boot-rockchip   Simon Glass
• [U-Boot] [ANN] U-Boot v2016.09-rc1 released   Simon Glass
• [U-Boot] How to support ATF on u-boot   Simon Glass
• [U-Boot] [PATCH 4/7] pci: Flip condition for detecting non-PCI parent devices   Simon Glass
• [U-Boot] [PATCH 1/7] serial: ns16550: Support clocks via phandle   Simon Glass
• [U-Boot] [PATCH 3/7] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge   Simon Glass
• [U-Boot] [PATCH 29/30] RFC: Use binman for a sunxi board   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option   Simon Glass
• [U-Boot] [PATCH v2 00/11] buildman: Make the tool friendlier for first-time users   Simon Glass
• [U-Boot] [PATCH v2 01/11] buildman: Tidy up the README a little   Simon Glass
• [U-Boot] [PATCH v2 02/11] buildman: Automatically create a config file if needed   Simon Glass
• [U-Boot] [PATCH v2 03/11] buildman: Fix the 'help' test to use the correct path   Simon Glass
• [U-Boot] [PATCH v2 04/11] buildman: Allow the toolchain error to be suppressed   Simon Glass
• [U-Boot] [PATCH v2 05/11] buildman: Improve the toolchain progress/error output   Simon Glass
• [U-Boot] [PATCH v2 06/11] buildman: Fix a typo in TestSettingsHasPath()   Simon Glass
• [U-Boot] [PATCH v2 07/11] buildman: Drop the toolchain error when downloading toolchains   Simon Glass
• [U-Boot] [PATCH v2 08/11] buildman: Avoid overwriting existing toolchain entries   Simon Glass
• [U-Boot] [PATCH v2 09/11] buildman: Add a quick-start note   Simon Glass
• [U-Boot] [PATCH v2 10/11] Drop the MAKEALL tool   Simon Glass
• [U-Boot] [PATCH v2 11/11] Drop references to MAKEALL in the documentation   Simon Glass
• [U-Boot] [PATCH v2] rk3399: Reserve space for ARM Trust Firmware   Simon Glass
• [U-Boot] [PATCH 1/2] rk3399: add basic soc driver   Simon Glass
• [U-Boot] [PATCH 2/2] mmc: rockchip: add clock init   Simon Glass
• [U-Boot] [PATCH v2 04/10] rockchip: rk3288: disable fastboot in SPL stage   Simon Glass
• [U-Boot] [PATCH v2 09/10] rockchip: add basic support for fennec-rk3288 board   Simon Glass
• [U-Boot] [PATCH v2 10/10] rockchip: add support for rk3288 PopMetal board   Simon Glass
• [U-Boot] [PATCH v2 00/11] buildman: Make the tool friendlier for first-time users   Simon Glass
• [U-Boot] [PATCH v4] mmc-uclass: correct the device number   Simon Glass
• [U-Boot] [PATCH v2 08/10] rockchip: rk3036: update MAINTAINER file   Simon Glass
• [U-Boot] [PATCH v2] rk3399: Reserve space for ARM Trust Firmware   Simon Glass
• [U-Boot] [PATCH v2] rockchip: rk3288: Fix pinctrl for GPIO bank 0   Simon Glass
• [U-Boot] [PATCH v2 01/10] rockchip: add a dummy byte for the sdram-channel property   Simon Glass
• [U-Boot] [PATCH v2 02/10] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Simon Glass
• [U-Boot] [PATCH v2 03/10] Revert "rockchip: Move the MMC setup check earlier"   Simon Glass
• [U-Boot] [PATCH v2 04/10] rockchip: rk3288: disable fastboot in SPL stage   Simon Glass
• [U-Boot] [PATCH v2 05/10] rockchip: remove the duplicated macro config   Simon Glass
• [U-Boot] [PATCH v2 06/10] rockchip: rk3288: revise CONFIG_FASTBOOT_BUF_ADDR   Simon Glass
• [U-Boot] [PATCH v2 07/10] rockchip: rk3288: move evb board to rockchip folder   Simon Glass
• [U-Boot] [PATCH v2 09/10] rockchip: add basic support for fennec-rk3288 board   Simon Glass
• [U-Boot] [PATCH v2 10/10] rockchip: add support for rk3288 PopMetal board   Simon Glass
• [U-Boot] [PATCH v2 0/8] basic rockchip rk3188 support   Simon Glass
• [U-Boot] [PATCH] move: rockchip: move clock drivers into a subdirectory   Simon Glass
• [U-Boot] [PATCH] common: image: Add support for post-processing of images   Simon Glass
• [U-Boot] u-boot: x86: interrupt mapping   Christian Gmeiner
• [U-Boot] u-boot: x86: interrupt mapping   Christian Gmeiner
• [U-Boot] u-boot: x86: interrupt mapping   Christian Gmeiner
• [U-Boot] [PATCH] SPL: sunxi: don't force .BSS into DRAM   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)   Hans de Goede
• [U-Boot] [PATCH 00/15] ARM: PSCI: Add secure stack and data sections   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [U-Boot, 1/1] sunxi: Add support for A33-OLinuXino board   Hans de Goede
• [U-Boot] [U-Boot, v1] dm: usb: Prevent NULL hub in usb_device_info()   Hans de Goede
• [U-Boot] [PATCH 00/15] ARM: PSCI: Add secure stack and data sections   Hans de Goede
• [U-Boot] sunxi: kernel crash on shutdown due to locked i2c bus depending on u-boot version   Hans de Goede
• [U-Boot] [U-Boot, v1] dm: usb: Prevent NULL hub in usb_device_info()   Hans de Goede
• [U-Boot] [PATCH 1/2] usb: dm: Add a usb_for_each_root_dev() helper function   Hans de Goede
• [U-Boot] [PATCH 2/2] usb: dm: Make "usb info" use usb_for_each_root_dev()   Hans de Goede
• [U-Boot] Stepping down as sunxi u-boot custodian   Hans de Goede
• [U-Boot] [PATCH v5 0/8] ARMv7: PSCI: add PSCI v1.0 support   Hans de Goede
• [U-Boot] [RESEND PATCH] sunxi: mmc: increase status register polling rate for data transfers   Hans de Goede
• [U-Boot] 2016.07 regression on Orange Pi PC   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add support for eth1addr   Hans de Goede
• [U-Boot] [PATCH] sunxi: Remove some unnecessary #ifdefs   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add support for eth1addr   Hans de Goede
• [U-Boot] [PATCH v2] sunxi: Add support for multiple ethadrr-esses   Hans de Goede
• [U-Boot] [PATCH 1/4] sunxi: Use BROM stored boot_media value to determine our boot-source   Hans de Goede
• [U-Boot] [PATCH 2/4] sunxi: orangepi_pc: Add support for eMMC found on the Orange Pi PC Plus   Hans de Goede
• [U-Boot] [PATCH 3/4] sunxi: Sync sun8i-h3-orangepi-plus.dts with upstream   Hans de Goede
• [U-Boot] [PATCH 4/4] sunxi: Add defconfig and dts file for the Orange Pi Lite SBC   Hans de Goede
• [U-Boot] [U-BOOT][PATCH v2] net:Add EMAC driver for H3/A83T/A64 SoCs.   Hans de Goede
• [U-Boot] Ethernet on Colombus (sun6i-a31-colombus)   Hans de Goede
• [U-Boot] [PATCH v2] sunxi: Add support for multiple ethadrr-esses   Hans de Goede
• [U-Boot] [PATCH 1/4] sunxi: Use BROM stored boot_media value to determine our boot-source   Hans de Goede
• [U-Boot] Stepping down as sunxi u-boot custodian   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH] configs: Add more CONFIG_ARMV7_PSCI_NR_CPUS entries   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC   Hans de Goede
• [U-Boot] [PATCH] sunxi: Disable sun8i emac driver   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH 1/3] sunxi: Add EMAC ethernet0 alias for H3 dtsi   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH 1/4] net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers   Hans de Goede
• [U-Boot] [PATCH 2/4] sunxi: Ensure that the NIC specific bytes of the mac are not all 0   Hans de Goede
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Hans de Goede
• [U-Boot] [PATCH 4/4] sunxi: Re-enable h3 emac support   Hans de Goede
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Hans de Goede
• [U-Boot] [PATCH 1/4] net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC   Hans de Goede
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Hans de Goede
• [U-Boot] [PATCH v2] sun8i: On H3 Use words 1-3 instead of just word 3 from the SID   Hans de Goede
• [U-Boot] [PATCH v2] net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers   Hans de Goede
• [U-Boot] [PATCH v2] sun8i: On H3 Use words 1-3 instead of just word 3 from the SID   Hans de Goede
• [U-Boot] [PATCH v3] sunxi: On newer SoCs use words 1-3 instead of just word 3 from the SID   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH 2/3] armv8/fsl_lsch2: Add LS1046A SoC support   Qianyu Gong
• [U-Boot] [PATCH 3/3] armv8/ls1046a: Add Fman support   Qianyu Gong
• [U-Boot] [Patch v2 3/4] armv8: fsl_lsch2: Add serdes 2 support   Qianyu Gong
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   Qianyu Gong
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   Qianyu Gong
• [U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model   Qianyu Gong
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   Qianyu Gong
• [U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model   Qianyu Gong
• [U-Boot] [PATCH] powerpc/85xx: Increase fdt address   Paul Gortmaker
• [U-Boot] [PATCH] arm: Fix setjmp (again)   Alexander Graf
• [U-Boot] Building efi_boottime.o fails for OpenRD (kirkwood) targets   Alexander Graf
• [U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel   Alexander Graf
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alexander Graf
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alexander Graf
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alexander Graf
• [U-Boot] [PATCH 3/6] efi_loader: Search .dtb on non-EFI partitions   Alexander Graf
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Alexander Graf
• [U-Boot] [PATCH 6/6] efi_loader: Display which .dtb we found   Alexander Graf
• [U-Boot] [PATCH 6/6] efi_loader: Display which .dtb we found   Alexander Graf
• [U-Boot] [PATCH 2/2] ARM: bcm283x: Implement EFI RTS reset_system   Alexander Graf
• [U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi   Alexander Graf
• [U-Boot] [PATCH v2] efi_loader: Add debug output for efi_add_memory_map()   Alexander Graf
• [U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel   Alexander Graf
• [U-Boot] [PATCH v1 6/6] armv8: layerscape: Convert to use common MMU framework   Alexander Graf
• [U-Boot] [PATCH v1 0/6] Convert FSL LayerScape ARMv8 SoCs to use common MMU code   Alexander Graf
• [U-Boot] [PATCH] iso: Fix part info command   Alexander Graf
• [U-Boot] [PATCH] ARM64: zynqmp: Enable AHCI on EP platform   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Make exposed image loader path absolute   Alexander Graf
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Alexander Graf
• [U-Boot] [PATCH] armv8: mmu: Detect page table overflow in emergency pt creation   Alexander Graf
• [U-Boot] [PATCH] serial: bcm283x_mu: Detect disabled serial device   Alexander Graf
• [U-Boot] [PATCH v2] armv8: mmu: Detect page table overflow in emergency pt creation   Alexander Graf
• [U-Boot] [PATCH v2 2/4] fdt_support: define stub for fdt_fixup_mtdparts   Igor Grinberg
• [U-Boot] [PATCH v2 3/4] ARM: board: cm_fx6: fixup mtd partitions in the fdt   Igor Grinberg
• [U-Boot] [PATCH v2 4/4] ARM: configs: cm_fx6: add mtd support   Igor Grinberg
• [U-Boot] [PATCH] video: allow version string to be optional when using LOGO   Anatolij Gustschin
• [U-Boot] [PATCH v2] video: allow version string to be optional when using LOGO   Anatolij Gustschin
• [U-Boot] [PATCH 3/4] rockchip: Use rockchip_get_clk() to obtain the SoC clock   Anatolij Gustschin
• [U-Boot] [PATCH] splash: Accommodate DM_USB in splash_init_usb()   Anatolij Gustschin
• [U-Boot] [PATCH] splash: Introduce default_splash_locations   Anatolij Gustschin
• [U-Boot] Please pull: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH v2] splash: Introduce default_splash_locations   Anatolij Gustschin
• [U-Boot] [PATCH] splash: Introduce default_splash_locations   Anatolij Gustschin
• [U-Boot] [PATCH v2] splash: Introduce default_splash_locations   Anatolij Gustschin
• [U-Boot] Please pull: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH 0/2] mpc83xx: fix the broken on the mpc83xx boards   Kevin Hao
• [U-Boot] [PATCH 1/2] mpc83xx: fix the corruption of u-boot when saveenv   Kevin Hao
• [U-Boot] [PATCH 2/2] mpc83xx: make it bootable with the latest kernel   Kevin Hao
• [U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel   Ryan Harkin
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Ryan Harkin
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Ryan Harkin
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Ryan Harkin
• [U-Boot] [PATCH 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig   Ryan Harkin
• [U-Boot] [PATCH] video: allow version string to be optional when using LOGO   Tim Harvey
• [U-Boot] [PATCH 0/5] imx: ventana: stability fixes   Tim Harvey
• [U-Boot] [PATCH 0/4] make rs232 and dio board-specific   Tim Harvey
• [U-Boot] [PATCH 1/4] imx: ventana: make RS232 enable board specific   Tim Harvey
• [U-Boot] [PATCH 2/4] imx: ventana: make number of digital I/O's dynamic   Tim Harvey
• [U-Boot] [PATCH 3/4] imx: ventana: add extra DIO's for GW5520   Tim Harvey
• [U-Boot] [PATCH 4/4] imx: ventana: make hwconfig initialize based on board configuration   Tim Harvey
• [U-Boot] [PATCH 0/2] imx: ventana: add dt fixup for watchdog external reset   Tim Harvey
• [U-Boot] [PATCH 1/2] imx: ventana: refactor board-specific dt fixups (no functional change)   Tim Harvey
• [U-Boot] [PATCH 2/2] imx: ventana: add dt fixup for watchdog external reset   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: enable splashscreen support   Tim Harvey
• [U-Boot] NXP QorIQ LS1021A-IoT board support   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: enable splashscreen support   Tim Harvey
• [U-Boot] NXP QorIQ LS1021A-IoT board support   Tim Harvey
• [U-Boot] [PATCH v2] net: usb: r8152: Add DM support   Joe Hershberger
• [U-Boot] [PATCH v2] powerpc: MPC8544DS: revert typo in I2C offset value   Joe Hershberger
• [U-Boot] [PATCH] net: rtl8169: Fix return value for rtl_send_common   Joe Hershberger
• [U-Boot] [PATCH 02/14] mkimage: Explain the auto-fit imagefile special case   Joe Hershberger
• [U-Boot] [Patch v2] driver: net: phylib: add support for aquantia AQR106/107 PHY   Joe Hershberger
• [U-Boot] [PATCH] net: Fix incorrect RPC packets on 64-bit systems   Joe Hershberger
• [U-Boot] [PATCH] driver/net/fec: support fixed speed connection   Joe Hershberger
• [U-Boot] [PATCH] net: designware: Make driver independent from DM_GPIO again   Joe Hershberger
• [U-Boot] [PATCH] net: smsc95xx: Use correct get_unaligned functions   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [RFC PATCH 0/7] "Transient" (= export-restricted) environment vars   Joe Hershberger
• [U-Boot] (no subject)   Joe Hershberger
• [U-Boot] (no subject)   Joe Hershberger
• [U-Boot] (no subject)   Joe Hershberger
• [U-Boot] (no subject)   Joe Hershberger
• [U-Boot] (no subject)   Joe Hershberger
• [U-Boot] common: Always include errno.h in common.h   Joe Hershberger
• [U-Boot] net: designware: Make driver independent from DM_GPIO again   Joe Hershberger
• [U-Boot] driver: net: phylib: add support for aquantia AQR106/107 PHY   Joe Hershberger
• [U-Boot] net: Fix incorrect RPC packets on 64-bit systems   Joe Hershberger
• [U-Boot] net: rtl8169: Fix return value for rtl_send_common   Joe Hershberger
• [U-Boot] [PATCH V3] net: NFS: Add NFSv3 support   Joe Hershberger
• [U-Boot] [PATCH v2 05/10] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base   Joe Hershberger
• [U-Boot] [PATCH v2 06/10] net: pch_gbe: Make 64 bit safe   Joe Hershberger
• [U-Boot] [PATCH 1/3] net: emaclite: Use ioremap_nocache   Joe Hershberger
• [U-Boot] [PATCH 2/3] net: emaclite: use __raw_readl/writel instead of weird define   Joe Hershberger
• [U-Boot] [PATCH 3/3] net: emaclite: Enable driver for MIPS   Joe Hershberger
• [U-Boot] [PATCH v2 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Joe Hershberger
• [U-Boot] [PATCH] configs: da850evm: enable bootz command   Kevin Hilman
• [U-Boot] Inverted ARM SoC DRAM timing for self-refresh exit and power-down exit.   Éric Hoffman
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   Zhiqiang Hou
• [U-Boot] [PATCH 2/5] arm: fsl-layerscape: move forward the non-secure access permission setup   Zhiqiang Hou
• [U-Boot] [PATCH 3/5] fsl: csu: add an API to set individual device access permission   Zhiqiang Hou
• [U-Boot] [PATCH 4/5] fsl: csu: add an API to disable all R/W permission to PCIe   Zhiqiang Hou
• [U-Boot] [PATCH 5/5] fsl-layerscape: Add workaround for PCIe erratum A010315   Zhiqiang Hou
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   Zhiqiang Hou
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   Zhiqiang Hou
• [U-Boot] [PATCH 5/5] fsl-layerscape: Add workaround for PCIe erratum A010315   Zhiqiang Hou
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   Zhiqiang Hou
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   Zhiqiang Hou
• [U-Boot] [PATCH 3/5] fsl: csu: add an API to set individual device access permission   Zhiqiang Hou
• [U-Boot] [PATCH 1/3] arm/PSCI: Removed unused code   Zhiqiang Hou
• [U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue   Zhiqiang Hou
• [U-Boot] [PATCH 3/3] arm/PSCI: Added support for creating ARMv7 PSCI version 1.0 DT node   Zhiqiang Hou
• [U-Boot] [PATCH] ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIP   Zhiqiang Hou
• [U-Boot] [PATCH] armv8: Enable CPUECTLR.SMPEN for data coherency   Mingkai Hu
• [U-Boot] [PATCH] armv8: Enable CPUECTLR.SMPEN for data coherency   Mingkai Hu
• [U-Boot] [PATCH] net: Fix incorrect RPC packets on 64-bit systems   Ralf Hubert
• [U-Boot] [PATCH] powerpc: p1_p2_rdb_pc: rename to P2020RDB_PC   Bryan Hundven
• [U-Boot] [PATCH] armv8: spl: Call board_init_r from crt0_64 in SPL   Jeremy Hunt
• [U-Boot] [PATCH v2] armv8: spl: Call board_init_r from crt0_64 in SPL   Jeremy Hunt
• [U-Boot] [PATCH v3] armv8: spl: Call board_init_r from crt0_64 in SPL   Jeremy Hunt
• [U-Boot] Network boot fallback usage/features   Dragan Isakovic
• [U-Boot] Network boot fallback usage/features   Dragan Isakovic
• [U-Boot] Network boot fallback usage/features   Dragan Isakovic
• [U-Boot] Pull request: u-boot-sh/rmobile   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh master   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmobile   Nobuhiro Iwamatsu
• [U-Boot] bootm, Linux, and device trees   John Jacques
• [U-Boot] AHCI driver is quiet slow   Yaroslav K.
• [U-Boot] [PATCH] Bug in cbfs   Yaroslav K.
• [U-Boot] [PATCH 0/2] MIPS: Add MIPSfpga u-boot port   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 1/2] mips: Add MIPSfpga platform support   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 2/2] mips: xilfpga: Add device tree files   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 0/3] net: emaclite: fixes and enable for MIPS   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 1/3] net: emaclite: Use ioremap_nocache   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 2/3] net: emaclite: use __raw_readl/writel instead of weird define   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 3/3] net: emaclite: Enable driver for MIPS   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 1/2] mips: Add MIPSfpga platform support   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 2/2] mips: xilfpga: Add device tree files   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH_v2 0/2] MIPS: Add MIPSfpga u-boot port   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH_v2 1/2] mips: xilfpga: Add device tree files   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH_v2 2/2] mips: Add MIPSfpga platform support   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 2/2] dm: mmc: dwmmc: use the callback functions as static   Minkyu Kang
• [U-Boot] [PATCH] ARM: exynos4: dts: add the prefix '/' for aliases nodes   Minkyu Kang
• [U-Boot] [PATCH 0/5] mmc: exynos_dw_mmc: clean the unnecessary codes   Minkyu Kang
• [U-Boot] [PATCH] mmc: exynos_dw_mmc: support the Driver mode for Exynos   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH 3/3] mmc: use the generic error number   Minkyu Kang
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Minkyu Kang
• [U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg   Minkyu Kang
• [U-Boot] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Murali Karicheri
• [U-Boot] [tiU16.05 PATCH v1] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Murali Karicheri
• [U-Boot] [U-Boot PATCH v1] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Murali Karicheri
• [U-Boot] [Resend: U-Boot PATCH v2] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Murali Karicheri
• [U-Boot] [Resend: U-Boot PATCH v2] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Murali Karicheri
• [U-Boot] [PATCH v3] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Murali Karicheri
• [U-Boot] [PATCH] Revert "Revert "rockchip: rk3288: correct sdram setting""   John Keeping
• [U-Boot] [PATCH v2] rockchip: sdram: Fix register layout for Linux   John Keeping
• [U-Boot] [PATCH] rockchip: rk3288: Fix pinctrl for GPIO bank 0   John Keeping
• [U-Boot] [PATCH v2] rockchip: rk3288: Fix pinctrl for GPIO bank 0   John Keeping
• [U-Boot] [PATCH 0/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH 1/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH 2/2] ARM: OMAP5+: Override switch_to_hypervisor function   Keerthy
• [U-Boot] [PATCH 0/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH 0/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH 0/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH v2 0/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH v2 1/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH v2 2/2] ARM: OMAP5+: Override switch_to_hypervisor function   Keerthy
• [U-Boot] [PATCH v2 0/2] ARM: Introduce function to switch to hypervisor mode   Keerthy
• [U-Boot] [PATCH] fixing typo error in README file. CPU15 -> CP15   yeongjun Kim
• [U-Boot] [PATCH] fixing typo error in README file. CPU15 -> CP15   yeongjun Kim
• [U-Boot] [PATCH 1/3] ARM: configs: cm_fx6: improve default environment   Nikita Kiryanov
• [U-Boot] [PATCH 2/3] ARM: board: cm_fx6: fixup mtd partitions in the fdt   Nikita Kiryanov
• [U-Boot] [PATCH 2/3] ARM: board: cm_fx6: fixup mtd partitions in the fdt   Nikita Kiryanov
• [U-Boot] [PATCH v2 0/4] ARM: imx: enhance support for the cm-fx6 module   Nikita Kiryanov
• [U-Boot] [PATCH] mx7_common: initialize generic timer on all CPU's   Max Krummenacher
• [U-Boot] Disable command at runtime   Petr Kubizňák
• [U-Boot] Disable command at runtime   Petr Kubizňák
• [U-Boot] [PATCH] mmc: msm_sdhci: Set mmc->dev pointer in msm_sdc_probe()   Mateusz Kulikowski
• [U-Boot] [PATCH] dragonboard410c: prefer sdcard boot over emmc   Mateusz Kulikowski
• [U-Boot] [PATCH] dragonboard410c: adding missing default addr for script and pxe boot   Mateusz Kulikowski
• [U-Boot] [PATCH] arm: start.S: Fix startup of dragonboard410c   Mateusz Kulikowski
• [U-Boot] [PATCH] armv8: Enable CPUECTLR.SMPEN for data coherency   Prabhakar Kushwaha
• [U-Boot] [Patch v2 2/4] armv8/fsl_lsch2: Add LS1046A SoC support   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: Enable CPUECTLR.SMPEN for data coherency   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/3] Enable SECURE BOOT in SPL framework   Prabhakar Kushwaha
• [U-Boot] Please investigate T2080QDS U-Boot   Prabhakar Kushwaha
• [U-Boot] [PATCH] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   Prabhakar Kushwaha
• [U-Boot] [PATCH] board: ls1012aqds: Update LBMAP_MASK and RST_CTL_RESET   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/2] armv8: ls1012a: Enable DDR row-bank-column decoding   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] armv8: ls1012a: Update Refresh cycle for DDR   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/5] fsl: csu: add an API to set individual device access permission   Prabhakar Kushwaha
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Lad, Prabhakar
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Lad, Prabhakar
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Lad, Prabhakar
• [U-Boot] [PATCH v3] nitrogen6x : Use generic distro configuration   Fabien Lahoudere
• [U-Boot] fw_env.conf for gigabyte mp30ar0 or force u-boot console on boot   Thomas Lamprecht
• [U-Boot] [PATCH] warp7: Increase CONFIG_BOOTDELAY   Breno Lima
• [U-Boot] [PATCH] warp7: Remove CONFIG_BOOTDELAY variable   Breno Lima
• [U-Boot] [PATCH v2] warp7: Remove CONFIG_BOOTDELAY variable   Breno Lima
• [U-Boot] [PATCH] serial_mxc: Remove unconditional DCE setting   Breno Lima
• [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"   Breno Lima
• [U-Boot] [PATCH 1/3] wandboard: Replace is_cpu_type() for macro   Breno Lima
• [U-Boot] [PATCH 2/3] mx6cuboxi: Replace is_mx6q() for macro   Breno Lima
• [U-Boot] [PATCH 3/3] cgtqmx6eval: Replace is_mx6q() for macro   Breno Lima
• [U-Boot] [PATCH] warp7: Move some USB configuration options to defconfig   Breno Lima
• [U-Boot] [PATCH] spl_nor.c: Support devicetree sizes different from 16k   Mike Looijmans
• [U-Boot] [PATCH] spl_nor.c: Support devicetree sizes different from 16k   Mike Looijmans
• [U-Boot] [PATCH v2] spl_nor.c: Support devicetree sizes different from 16k   Mike Looijmans
• [U-Boot] [PATCH v2] spl_nor.c: Support devicetree sizes different from 16k   Mike Looijmans
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   Yangbo Lu
• [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards   Yangbo Lu
• [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards   Yangbo Lu
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   Yangbo Lu
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   Yangbo Lu
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   Yangbo Lu
• [U-Boot] u-boot: x86: interrupt mapping   Jian Luo
• [U-Boot] u-boot: x86: interrupt mapping   Jian Luo
• [U-Boot] u-boot: x86: interrupt mapping   Jian Luo
• [U-Boot] u-boot: x86: interrupt mapping   Jian Luo
• [U-Boot] [PATCH 2 00/22] DM: Cmd: GPIO/LED/STM32/CLK: provide command-line support for device-tree configured gpios and leds   Vikas MANOCHA
• [U-Boot] [U-Boot, 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board   Vikas MANOCHA
• [U-Boot] [PATCH 2 00/22] DM: Cmd: GPIO/LED/STM32/CLK: provide command-line support for device-tree configured gpios and leds   Vikas MANOCHA
• [U-Boot] [U-Boot, 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board   Vikas MANOCHA
• [U-Boot] [PATCH] pico-imx6ul: Add PMIC support   Vanessa Maegima
• [U-Boot] [PATCH v2] pico-imx6ul: Add PMIC support   Vanessa Maegima
• [U-Boot] [U-boot] Add Memset and Memcpy support to standalone Application   Amit Mahadik
• [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support   Lukasz Majewski
• [U-Boot] [PATCH 1/3] COSMETIC: mmc: sdhci: Add CONFIG_ prefix to SDHCI_READ_STATUS_TIMEOUT   Lukasz Majewski
• [U-Boot] [PATCH 2/3] FIX: mmc: sdhci: Board specific definitions for SDHCI CMD and READ TIMEOUTS   Lukasz Majewski
• [U-Boot] [PATCH 3/3] FIX: mmc: sdhci: exynos4: Define smaller SDHCI timeouts for Exynos4 based boards   Lukasz Majewski
• [U-Boot] [PATCH 1/3] COSMETIC: mmc: sdhci: Add CONFIG_ prefix to SDHCI_READ_STATUS_TIMEOUT   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Lukasz Majewski
• [U-Boot] [PATCH 2/2] mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B   Lukasz Majewski
• [U-Boot] [RFC PATCH v2 3/5] spl: dfu: adding dfu support functions for SPL-DFU   Lukasz Majewski
• [U-Boot] [RFC PATCH v2 2/5] common: dfu: saperate the dfu common functionality   Lukasz Majewski
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Lukasz Majewski
• [U-Boot] [RFC PATCH v2 3/5] spl: dfu: adding dfu support functions for SPL-DFU   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Lukasz Majewski
• [U-Boot] UBIFS broken on Microblaze architecture and possibly on other architectrures as well   Hoefle Marco
• [U-Boot] [PATCH] x86: som-db5800-som-6867: fix SERIRQ on reset   George McCollister
• [U-Boot] [PATCH] x86: som-db5800-som-6867: fix SERIRQ on reset   George McCollister
• [U-Boot] [PATCH v2] x86: som-db5800-som-6867: fix SERIRQ on reset   George McCollister
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Bin Meng
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Bin Meng
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Bin Meng
• [U-Boot] [PATCH] x86: link: Correct a failure in DRAM init   Bin Meng
• [U-Boot] [PATCH] x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config code   Bin Meng
• [U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)   Bin Meng
• [U-Boot] [PATCH] x86: link: Correct a failure in DRAM init   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] x86: doc: Add note about the debug FSP usage on BayTrail   Bin Meng
• [U-Boot] [PATCH] misc: Add simple driver for some Nuvoton NCT6102D devices   Bin Meng
• [U-Boot] [PATCH] misc: Add simple driver for some Nuvoton NCT6102D devices   Bin Meng
• [U-Boot] [PATCH] serial: ns16550: Add support for the BayTrail internal HS UART   Bin Meng
• [U-Boot] Running u-boot on a x86 board   Bin Meng
• [U-Boot] [PATCH 1/3] x86: Mention how to boot a 64-bit kernel from U-Boot   Bin Meng
• [U-Boot] [PATCH 2/3] x86: Add a reference to README.efi   Bin Meng
• [U-Boot] [PATCH 3/3] x86: Mention running U-Boot in 64-bit mode in the README   Bin Meng
• [U-Boot] [PATCH] x86: doc: Add note about the debug FSP usage on BayTrail   Bin Meng
• [U-Boot] [PATCH 1/3] x86: Mention how to boot a 64-bit kernel from U-Boot   Bin Meng
• [U-Boot] [PATCH 2/3] x86: Add a reference to README.efi   Bin Meng
• [U-Boot] [PATCH 3/3] x86: Mention running U-Boot in 64-bit mode in the README   Bin Meng
• [U-Boot] [PATCH] x86: cache.h: Add default for CONFIG_SYS_CACHELINE_SIZE   Bin Meng
• [U-Boot] [PATCH] x86: baytrail: Add SIO HS-UART clock setup   Bin Meng
• [U-Boot] [PATCH v2] misc: Add simple driver for some Nuvoton NCT6102D devices   Bin Meng
• [U-Boot] u-boot: x86: interrupt mapping   Bin Meng
• [U-Boot] [PATCH 1/2 v2] x86: Add DFI BT700 BayTrail board support   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Add theadorable-x86-dfi-bt700 board support   Bin Meng
• [U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)   Bin Meng
• [U-Boot] u-boot: x86: interrupt mapping   Bin Meng
• [U-Boot] [PATCH] x86: som-db5800-som-6867: fix SERIRQ on reset   Bin Meng
• [U-Boot] [PATCH 01/30] x86: Add debugging when a microcode update fails   Bin Meng
• [U-Boot] [PATCH 02/30] x86: ivybridge: Allow microcode to be collated   Bin Meng
• [U-Boot] [PATCH 03/30] x86: Add debugging when cpu_common_init() fails   Bin Meng
• [U-Boot] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Nishanth Menon
• [U-Boot] [PATCH v5 00/26] spl: Lightweight UBI and UBI fastmap support   Ladislav Michl
• [U-Boot] [PATCH v5 01/26] mtd: Sort subsystem directories aplhabeticaly in Makefile   Ladislav Michl
• [U-Boot] [PATCH v5 02/26] nand_spl_simple: Add a simple NAND read function   Ladislav Michl
• [U-Boot] [PATCH v5 03/26] onenand_spl_simple: Add a simple OneNAND read function   Ladislav Michl
• [U-Boot] [PATCH v5 04/26] spl: Lightweight UBI and UBI fastmap support   Ladislav Michl
• [U-Boot] [PATCH v5 05/26] spl: support loading from UBI volumes   Ladislav Michl
• [U-Boot] [PATCH v5 06/26] spl: zImage support in Falcon mode   Ladislav Michl
• [U-Boot] [PATCH v5 07/26] armv7: add reset timeout to identify_nand_chip   Ladislav Michl
• [U-Boot] [PATCH v5 08/26] armv7: make gpmc_cfg const   Ladislav Michl
• [U-Boot] [PATCH v5 09/26] armv7: armv7: introduce set_gpmc_cs0   Ladislav Michl
• [U-Boot] [PATCH v5 10/26] armv7: simplify identify_nand_chip   Ladislav Michl
• [U-Boot] [PATCH v5 11/26] mtd: OneNAND: add timeout to wait ready loops   Ladislav Michl
• [U-Boot] [PATCH v5 12/26] mtd: OneNAND: allow board init function fail   Ladislav Michl
• [U-Boot] [PATCH v5 13/26] mtd: OneNAND: initialize mtd->writebufsize to let UBI work   Ladislav Michl
• [U-Boot] [PATCH v5 14/26] cmd: mtdparts: fix mtdparts variable presence confusion in mtdparts_init   Ladislav Michl
• [U-Boot] [PATCH v5 15/26] cmd: mtdparts: fix null pointer dereference in parse_mtdparts   Ladislav Michl
• [U-Boot] [PATCH v5 16/26] cmd: mtdparts: consolidate mtdparts reading from env   Ladislav Michl
• [U-Boot] [PATCH v5 17/26] cmd: mtdparts: use defaults by default   Ladislav Michl
• [U-Boot] [PATCH v5 18/26] cmd: mtdparts: support runtime generated mtdparts   Ladislav Michl
• [U-Boot] [PATCH v5 19/26] igep00x0: move sysinfo into C file   Ladislav Michl
• [U-Boot] [PATCH v5 20/26] igep00x0: reorder lan9221 code to remove ifdefs   Ladislav Michl
• [U-Boot] [PATCH v5 21/26] igep00x0: remove useless setup_net_chip declaration   Ladislav Michl
• [U-Boot] [PATCH v5 22/26] igep00x0: remove unused empty function omap_rev_string()   Ladislav Michl
• [U-Boot] [PATCH v5 23/26] igep00x0: runtime flash detection   Ladislav Michl
• [U-Boot] [PATCH v5 24/26] igep00x0: UBIize   Ladislav Michl
• [U-Boot] [PATCH v5 25/26] igep00x0: generate default mtdparts according NAND chip used   Ladislav Michl
• [U-Boot] [PATCH v5 26/26] igep00x0: Falcon mode   Ladislav Michl
• [U-Boot] [PATCH 1/2] board: tbs2910: always enable usbkbd   Soeren Moch
• [U-Boot] [PATCH 2/2] board: tbs2910: fix HDMI pre-console buffer   Soeren Moch
• [U-Boot] [RESEND PATCH] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz   Mugunthan V N
• [U-Boot] [PATCH 00/14] DM conversion of omap i2c driver   Mugunthan V N
• [U-Boot] [PATCH 01/14] omap4: i2c: correct register offset for sync register   Mugunthan V N
• [U-Boot] [PATCH 02/14] omap5/dra7: i2c: correct register offset for sync register   Mugunthan V N
• [U-Boot] [PATCH 03/14] drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enable   Mugunthan V N
• [U-Boot] [PATCH 04/14] ti_armv7_common: i2c: do not define DM_I2C for spl   Mugunthan V N
• [U-Boot] [PATCH 05/14] drivers: i2c: omap24xx_i2c: prepare driver for DM conversion   Mugunthan V N
• [U-Boot] [PATCH 06/14] drivers: i2c: omap24xx_i2c: adopt omap_i2c driver to driver model   Mugunthan V N
• [U-Boot] [PATCH 07/14] defconfig: am335x_boneblack_vboot: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 08/14] defconfig: am335x_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 09/14] defconfig: am43xx_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 10/14] defconfig: am43xx_hs_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 11/14] defconfig: dra7xx_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 12/14] defconfig: dra7xx_hs_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 13/14] defconfig: am57xx_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 14/14] defconfig: am57xx_hs_evm: enable i2c driver model   Mugunthan V N
• [U-Boot] [PATCH 03/14] drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enable   Mugunthan V N
• [U-Boot] [PATCH v2 1/3] spi: ti_qspi: Fix failure on multiple READ_ID cmd   Mugunthan V N
• [U-Boot] [PATCH v2 2/3] spi: ti_qspi: Fix compiler warning when DEBUG macro is set   Mugunthan V N
• [U-Boot] [PATCH v2 3/3] spi: ti_qspi: Remove delay in read path for dra7xx   Mugunthan V N
• [U-Boot] [PATCH 03/14] drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enable   Mugunthan V N
• [U-Boot] [PATCH] configs: am43xx_evm_defconfig: Enable CONFIG_SPI_FLASH_BAR   Mugunthan V N
• [U-Boot] [PATCH 1/4] ARM: dra7xx: Change DPLL_PER_HS13 divider value   Mugunthan V N
• [U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock   Mugunthan V N
• [U-Boot] [PATCH 3/4] configs: dra7xx: Update QSPI speed to 76.8MHz   Mugunthan V N
• [U-Boot] [PATCH 4/4] ARM: dts: dra7xx: Update spi-max-frequency for QSPI   Mugunthan V N
• [U-Boot] [PATCH 1/2] ARM: am57xx_evm: Enable QSPI support   Mugunthan V N
• [U-Boot] [PATCH 1/2] ARM: am57xx_evm: Enable QSPI support   Mugunthan V N
• [U-Boot] [PATCH v2 1/2] ARM: am57xx_evm: Enable QSPI support   Mugunthan V N
• [U-Boot] [PATCH v2 2/2] ARM: dts: am57xx-idk-common: Enable support for QSPI   Mugunthan V N
• [U-Boot] [PATCH 1/1] configs/wandboard.h: fix dtb file name for findfdt.   Robert Nelson
• [U-Boot] DMA driver for PL330   Dinh Nguyen
• [U-Boot] [PATCH] configs: da850evm: enable bootz command   Sekhar Nori
• [U-Boot] dm: usb: Prevent NULL hub in usb_device_info()   Bernhard Nortmann
• [U-Boot] [RFC PATCH 0/7] "Transient" (= export-restricted) environment vars   Bernhard Nortmann
• [U-Boot] [RFC PATCH 1/7] env: Allow unconditional access if H_PROGRAMMATIC is set   Bernhard Nortmann
• [U-Boot] [RFC PATCH 2/7] net: dm: Ignore unknown env_op_* constants   Bernhard Nortmann
• [U-Boot] [RFC PATCH 3/7] env: Introduce "export" operation and (access flag) restriction   Bernhard Nortmann
• [U-Boot] [RFC PATCH 4/7] env: Introduce "transient" and "system" access flags   Bernhard Nortmann
• [U-Boot] [RFC PATCH 5/7] sunxi: env: flag fel_* environment vars as "system"   Bernhard Nortmann
• [U-Boot] [RFC PATCH 6/7] env: Introduce setenv_transient() helper function   Bernhard Nortmann
• [U-Boot] [RFC PATCH 7/7] env: Automatically mark dynamic configuration info as "do not export"   Bernhard Nortmann
• [U-Boot] [RFC PATCH 4/7] env: Introduce "transient" and "system" access flags   Bernhard Nortmann
• [U-Boot] [RFC PATCH 3/7] env: Introduce "export" operation and (access flag) restriction   Bernhard Nortmann
• [U-Boot] [RFC PATCH 2/7] net: dm: Ignore unknown env_op_* constants   Bernhard Nortmann
• [U-Boot] SPL on ZynqMP ZCU102 evaluation board   Oleksy, Adam (Nokia - PL/Wroclaw)
• [U-Boot] SPL on ZynqMP ZCU102 evaluation board   Oleksy, Adam (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH v2] net: smsc95xx: Use correct get_unaligned functions   Chris Packham
• [U-Boot] Passing information from SPL to next stage   Chris Packham
• [U-Boot] Passing information from SPL to next stage   Chris Packham
• [U-Boot] Passing information from SPL to next stage   Chris Packham
• [U-Boot] [PATCH] bootm: fixup silent Linux out of BOOTM_STATE_LOADOS state   Hector Palacios
• [U-Boot] [PATCH v2] bootm: fixup silent Linux out of BOOTM_STATE_LOADOS state   Hector Palacios
• [U-Boot] [RFC PATCH 0/1] bug writing to NAND 1 byte less than page size   Hector Palacios
• [U-Boot] [RFC PATCH 1/1] mtd: nand: fix bug writing 1 byte less than page size   Hector Palacios
• [U-Boot] [PATCH 1/1] mtd: nand-base: fix bug writing 1 byte less than page size   Hector Palacios
• [U-Boot] [RFC PATCH 1/1] mtd: nand: fix bug writing 1 byte less than page size   Hector Palacios
• [U-Boot] [PATCH v2 1/1] mtd: nand: fix bug writing 1 byte less than page size   Hector Palacios
• [U-Boot] [PATCH 1/1] mtd: nand-base: fix bug writing 1 byte less than page size   Hector Palacios
• [U-Boot] [PATCH 24/27] dm: zynq: usb: Convert to CONFIG_DM_USB   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/2] zynq: config: Enable CONFIG_SYS_NO_FLASH through defconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/2] zynq: defconfig: Remove unnecessary board specifc config files   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 0/3]spi: Add ZynqMP QSPI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 2/3] spi: zynqmp_qspi: Add QSPI driver support for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 3/3] spi: zynqmp_qspi: Add qspi driver support for ZynqMP boards   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 0/9] qspi: Add Quad and Dual mode support for Zynq QSPI   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/9] spi: zynq_qspi: Add quad support for zynq qspi   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/9] spi: zynq_qspi: Add support of Dual parallel and Dual stacked modes   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 3/9] sf: Kconfig: Add SF_DUAL_FLASH config entry   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 4/9] dts: zynq_zc706: update qspi node with is-dual and num-cs   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 5/9] defconfig: zc706: Add dual modes support for zc706   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 6/9] spi: spi_flash: Correct flash size calculation   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 7/9] spi: spi_flash: Correct bank select incase of dual stacked   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 8/9] spi: spi_flash: Fix Bank selection calculation for Dual parallel   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 9/9] spi: spi_flash: Set Quad enable bit of upper flash   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] usb: zynq: Define config USB_STORAGE through defconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] spi: xilinx_spi: Add support for Quad mode   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] spi: xilinx: Read reg base address from DTS file   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] spi: xilinx_spi: Set the speed to default value   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] spi: xilinx_spi: Add support for Quad mode   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 0/9] qspi: Add Quad and Dual mode support for Zynq QSPI   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/3] Kconfig: zynqmp: Move config IDENT_STRING to Kconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] zynqmp: Move config IDENT_STRING to defconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 3/3] zynqmp: Remove unnnecessary board config file for dc4   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] zynqmp: Move config IDENT_STRING to defconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/3] Kconfig: zynqmp: Move config IDENT_STRING to Kconfig   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Sandy Patterson
• [U-Boot] [PATCH 1/4] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code"   Sandy Patterson
• [U-Boot] [PATCH 2/4] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code"   Sandy Patterson
• [U-Boot] [PATCH 3/4] Disable CONFIG_EFI_LOADER for rock2.   Sandy Patterson
• [U-Boot] [PATCH 4/4] RK3288 needs fdt and initrd below 256M now.   Sandy Patterson
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Sandy Patterson
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Sandy Patterson
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Sandy Patterson
• [U-Boot] [PATCH v2 0/3] Fix loading kernel on RK3288 Radxa Rock2 Square   Sandy Patterson
• [U-Boot] [PATCH v2 1/3] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code"   Sandy Patterson
• [U-Boot] [PATCH v2 2/3] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code"   Sandy Patterson
• [U-Boot] [PATCH v2 3/3] CONFIG_EFI_LOADER breaks rock2 kernel loading   Sandy Patterson
• [U-Boot] [PATCH v2 1/3] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code"   Sandy Patterson
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Sandy Patterson
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Sandy Patterson
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Sandy Patterson
• [U-Boot] [PATCH] rockchip: rockchip, sdram-channel 0xff fix remaining dts   Sandy Patterson
• [U-Boot] mmc erase Command and Bad Sectors   Aron L. Phillips
• [U-Boot] mmc erase Command and Bad Sectors   Aron L. Phillips
• [U-Boot] [PATCH v2] spi: zynq_spi: Fix infinite looping while xfer   Lad Prabhakar
• [U-Boot] SPL loading multiple binaries from FIT image?   Andre Przywara
• [U-Boot] [PATCH] SPL: tiny-printf: avoid any BSS usage   Andre Przywara
• [U-Boot] [RFC PATCH] sunxi: SPL: place BSS in SRAM if possible   Andre Przywara
• [U-Boot] [PATCH v2] SPL: tiny-printf: avoid any BSS usage   Andre Przywara
• [U-Boot] [PATCH for v2016.07] doc: ARMv8: add README.pine64   Andre Przywara
• [U-Boot] How to support ATF on u-boot   Andre Przywara
• [U-Boot] How to support ATF on u-boot   Andre Przywara
• [U-Boot] [PATCH] SPL: sunxi: don't force .BSS into DRAM   André Przywara
• [U-Boot] [PATCH v2] SPL: tiny-printf: avoid any BSS usage   André Przywara
• [U-Boot] [PATCH] arm: start.S: Fix startup of dragonboard410c   André Przywara
• [U-Boot] [Patch v2 0/4] armv8: fsl-layerscape: Add LS1046A SoC support   Gong Qianyu
• [U-Boot] [Patch v2 1/4] armv8: fsl-layerscape: Add A72 core detection   Gong Qianyu
• [U-Boot] [Patch v2 2/4] armv8/fsl_lsch2: Add LS1046A SoC support   Gong Qianyu
• [U-Boot] [Patch v2 3/4] armv8: fsl_lsch2: Add serdes 2 support   Gong Qianyu
• [U-Boot] [Patch v2 4/4] drivers: net/fm: Add Fman support for LS1046A   Gong Qianyu
• [U-Boot] [Patch v2] driver: net: phylib: add support for aquantia AQR106/107 PHY   Gong Qianyu
• [U-Boot] [Patch v3 0/5] armv8: fsl-layerscape: Add LS1046A SoC support   Gong Qianyu
• [U-Boot] [Patch v3 1/5] armv8: fsl-layerscape: Add A72 core detection   Gong Qianyu
• [U-Boot] [Patch v3 2/5] armv8: fsl-layerscape: Consolidate the LSCH2 common defines   Gong Qianyu
• [U-Boot] [Patch v3 3/5] armv8: fsl_lsch2: Add SerDes 2 support   Gong Qianyu
• [U-Boot] [Patch v3 4/5] armv8: fsl_lsch2: Add LS1046A SoC support   Gong Qianyu
• [U-Boot] [Patch v3 5/5] drivers: net/fm: Add Fman support for LS1046A   Gong Qianyu
• [U-Boot] [Patch v2] armv8: Enable CPUECTLR.SMPEN for coherency   Gong Qianyu
• [U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model   Gong Qianyu
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   Gong Qianyu
• [U-Boot] [Patch v3] armv8: ls1043aqds: add IFC fixup in case QSPI is enabled   Gong Qianyu
• [U-Boot] [PATCH] SPL: tiny-printf: avoid any BSS usage   Vignesh R
• [U-Boot] [RESEND PATCH v3 00/12] Convert davinci_spi to DM   Vignesh R
• [U-Boot] [RESEND PATCH v5 01/12] dm: core: implement dev_map_phsymem()   Vignesh R
• [U-Boot] [RESEND PATCH v6 02/12] spi: davinci_spi: Convert to driver to adapt to DM   Vignesh R
• [U-Boot] [RESEND PATCH v3 03/12] keystone2: spi: do not define DM_SPI and DM_SPI_FLASH for SPL build   Vignesh R
• [U-Boot] [RESEND PATCH v3 04/12] ARM: dts: keystone2: add SPI aliases for davinci SPI nodes   Vignesh R
• [U-Boot] [RESEND PATCH v3 05/12] ARM: dts: k2hk: Enable Davinci SPI controller   Vignesh R
• [U-Boot] [RESEND PATCH v3 06/12] defconfig: k2hk_evm_defconfig: enable SPI driver model   Vignesh R
• [U-Boot] [RESEND PATCH v3 07/12] ARM: dts: k2e: Enable Davinci SPI controller   Vignesh R
• [U-Boot] [RESEND PATCH v3 08/12] defconfig: k2e_evm_defconfig: enable SPI driver model   Vignesh R
• [U-Boot] [RESEND PATCH v3 09/12] ARM: dts: k2l: Enable Davinci SPI controller   Vignesh R
• [U-Boot] [RESEND PATCH v3 10/12] defconfig: k2l_evm_defconfig: enable SPI driver model   Vignesh R
• [U-Boot] [RESEND PATCH v3 11/12] ARM: dts: k2g: add support for Davinci SPI controller   Vignesh R
• [U-Boot] [RESEND PATCH v3 12/12] defconfig: k2g_evm_defconfig: enable SPI driver model   Vignesh R
• [U-Boot] [RESEND PATCH v4] dm: spi: Read default speed and mode values from DT   Vignesh R
• [U-Boot] [RESEND PATCH 0/4] U-Boot: Add support for Cadence QSPI on K2G   Vignesh R
• [U-Boot] [RESEND PATCH 1/4] spi: cadence_qspi_apb: Support 32 bit AHB address   Vignesh R
• [U-Boot] [RESEND PATCH 2/4] spi: cadence_quadspi: Enable QUAD mode based on DT data   Vignesh R
• [U-Boot] [RESEND PATCH 3/4] ARM: dts: K2G: Add support for QSPI controller   Vignesh R
• [U-Boot] [RESEND PATCH 4/4] defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller   Vignesh R
• [U-Boot] [RESEND PATCH] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz   Vignesh R
• [U-Boot] [RESEND PATCH v5 01/12] dm: core: implement dev_map_phsymem()   Vignesh R
• [U-Boot] [PATCH 1/2] spi: ti_qspi: Fix failure on multiple READ_ID cmd   Vignesh R
• [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix compiler warning when DEBUG macro is set   Vignesh R
• [U-Boot] [PATCH 1/2] spi: ti_qspi: Fix failure on multiple READ_ID cmd   R, Vignesh
• [U-Boot] [PATCH v2 1/3] spi: ti_qspi: Fix failure on multiple READ_ID cmd   Vignesh R
• [U-Boot] [PATCH v2 2/3] spi: ti_qspi: Fix compiler warning when DEBUG macro is set   Vignesh R
• [U-Boot] [PATCH v2 3/3] spi: ti_qspi: Remove delay in read path for dra7xx   Vignesh R
• [U-Boot] [PATCH 0/4] dra7xx: QSPI: Increase SPI bus speed.   Vignesh R
• [U-Boot] [PATCH 1/4] ARM: dra7xx: Change DPLL_PER_HS13 divider value   Vignesh R
• [U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock   Vignesh R
• [U-Boot] [PATCH 3/4] configs: dra7xx: Update QSPI speed to 76.8MHz   Vignesh R
• [U-Boot] [PATCH 4/4] ARM: dts: dra7xx: Update spi-max-frequency for QSPI   Vignesh R
• [U-Boot] [RFC PATCH] i2c: i2c-uclass-compat: avoid any BSS usage   Vignesh R
• [U-Boot] [PATCH 0/4] Add support for TI PCF8575 I2C GPIO expander   Vignesh R
• [U-Boot] [PATCH 1/4] gpio: Add driver for TI PCF8575 I2C GPIO expander   Vignesh R
• [U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575   Vignesh R
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Vignesh R
• [U-Boot] [PATCH 4/4] ARM: dts: dra72-evm: Add mode-gpios entry for mac node   Vignesh R
• [U-Boot] [PATCH 4/4] ARM: dts: dra7xx: Update spi-max-frequency for QSPI   Vignesh R
• [U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575   Vignesh R
• [U-Boot] [PATCH 0/4] dra7xx: QSPI: Increase SPI bus speed.   Vignesh R
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   R, Vignesh
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   R, Vignesh
• [U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock   Vignesh R
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Vignesh R
• [U-Boot] [RFC PATCH] i2c: i2c-uclass-compat: avoid any BSS usage   Vignesh R
• [U-Boot] [PATCH] configs: am43xx_evm_defconfig: Enable CONFIG_SPI_FLASH_BAR   Vignesh R
• [U-Boot] [PATCH 0/2] AM57xx-IDK: Add QSPI support   Vignesh R
• [U-Boot] [PATCH 1/2] ARM: am57xx_evm: Enable QSPI support   Vignesh R
• [U-Boot] [PATCH 2/2] ARM: dts: am57xx-idk-common: Enable support for QSPI   Vignesh R
• [U-Boot] [PATCH 0/2] AM57xx-IDK: Add QSPI support   Vignesh R
• [U-Boot] [PATCH v2 0/2] AM57xx-IDK: Add QSPI support:wq   Vignesh R
• [U-Boot] [PATCH v2 1/2] ARM: am57xx_evm: Enable QSPI support   Vignesh R
• [U-Boot] [PATCH v2 2/2] ARM: dts: am57xx-idk-common: Enable support for QSPI   Vignesh R
• [U-Boot] [PATCH 1/2] ARM: am57xx_evm: Enable QSPI support   Vignesh R
• [U-Boot] [PATCH v2 0/4] Add support for TI PCF8575 I2C GPIO expander   Vignesh R
• [U-Boot] [PATCH v2 1/4] gpio: Add driver for TI PCF8575 I2C GPIO expander   Vignesh R
• [U-Boot] [PATCH v2 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575   Vignesh R
• [U-Boot] [PATCH v2 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Vignesh R
• [U-Boot] [PATCH v2 4/4] ARM: dts: dra72-evm: Add mode-gpios entry for mac node   Vignesh R
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Steve Rae
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Steve Rae
• [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data   Steve Rae
• [U-Boot] Booting armv8 Kernel on UBoot   Rajkumar Ramasamy
• [U-Boot] Booting armv8 Kernel on UBoot   Rajkumar Ramasamy
• [U-Boot] Booting armv8 Kernel on UBoot   Rajkumar Ramasamy
• [U-Boot] PCIe bridges on Jetson TK1   Thierry Reding
• [U-Boot] PCIe bridges on Jetson TK1   Thierry Reding
• [U-Boot] [PATCH 11/14] tools: Add an error code when fit_handle_file() fails   Teddy Reed
• [U-Boot] [PATCH 01/14] test: Add a README   Teddy Reed
• [U-Boot] [PATCH 04/14] test/py: Allow tests to control the sandbox device-tree file   Teddy Reed
• [U-Boot] [PATCH 08/14] test/py: Add an option to execute a string containing a command   Teddy Reed
• [U-Boot] [PATCH 03/14] sandbox: Don't exit when bootm completes   Teddy Reed
• [U-Boot] [PATCH 02/14] test: Add a simple script to run tests on sandbox   Teddy Reed
• [U-Boot] [PATCH 05/14] test/py: Allow RunAndLog() to return the output   Teddy Reed
• [U-Boot] [PATCH 06/14] test/py: Provide output from exceptions with RunAndLog()   Teddy Reed
• [U-Boot] [PATCH 09/14] test/py: Provide a way to check that a command fails   Teddy Reed
• [U-Boot] [PATCH 07/14] test/py: Return output from run_and_log()   Teddy Reed
• [U-Boot] [PATCH 10/14] test/py: Add a helper to run a list of U-Boot commands   Teddy Reed
• [U-Boot] [PATCH 13/14] test/py: Fix up after the rename of CONFIG_SYS_HUSH_PARSER   Teddy Reed
• [U-Boot] [PATCH 12/14] tools: Correct error handling in fit_image_process_hash()   Teddy Reed
• [U-Boot] [PATCH 14/14] test: Convert the vboot test to test/py   Teddy Reed
• [U-Boot] [PATCH] mkimage: fix missing break for -p switch   Teddy Reed
• [U-Boot] [PATCH PATCH v1] watchdog: Fix Watchdog Reset while in U-Boot Prompt   Andreas J. Reichel
• [U-Boot] [PATCH PATCH v1 0/1] Fix U-Boot Prompt on CM-FX6 with enabled watchdog   Andreas J. Reichel
• [U-Boot] [PATCH] configs: Finish re-syncing boot menu changes   Tom Rini
• [U-Boot] [PATCH 00/14] mkimage: Tidy up error handling   Tom Rini
• [U-Boot] [PATCH 00/14] mkimage: Tidy up error handling   Tom Rini
• [U-Boot] [PATCH 01/14] mkimage: Honour the default image type with auto-fit   Tom Rini
• [U-Boot] [PATCH 03/14] mkimage: Require a data file when auto-fit is used   Tom Rini
• [U-Boot] [PATCH 04/14] mkimage: Drop premature setting of params.fit_image_type   Tom Rini
• [U-Boot] [PATCH 05/14] mkimage: Drop blank line before main()   Tom Rini
• [U-Boot] [PATCH 06/14] image: Correct auto-fit architecture property name   Tom Rini
• [U-Boot] [PATCH 07/14] image: Convert the IH_... values to enums   Tom Rini
• [U-Boot] [PATCH 08/14] image: Create a table of information for each category   Tom Rini
• [U-Boot] [PATCH 09/14] image: Add a name for invalid types   Tom Rini
• [U-Boot] [PATCH 10/14] image: Add functions to obtain category information   Tom Rini
• [U-Boot] [PATCH 11/14] mkimage: Allow display of a list of any image header category   Tom Rini
• [U-Boot] [PATCH 12/14] mkimage: Use generic code for showing an 'image type' error   Tom Rini
• [U-Boot] [PATCH 13/14] mkimage: Show item lists for all categories   Tom Rini
• [U-Boot] [PATCH 14/14] tools: Allow building with debug enabled   Tom Rini
• [U-Boot] configs: Finish re-syncing boot menu changes   Tom Rini
• [U-Boot] driver: qspi: correct QSPI disable CS reset value   Tom Rini
• [U-Boot] [U-Boot, v2] ARM: AM437x: Align HS device variant defconfig filename   Tom Rini
• [U-Boot] [U-Boot, v3, 1/6] ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board   Tom Rini
• [U-Boot] [U-Boot, v3, 2/6] doc: bootdelay: drop explanation about CONFIG_BOOTDELAY from README   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK   Tom Rini
• [U-Boot] [U-Boot, v3, 4/6] autoboot: rename abortboot_{keyed, normal} to __abortboot   Tom Rini
• [U-Boot] [U-Boot, v3, 5/6] autoboot: move CONFIG_SILENT_CONSOLE handling   Tom Rini
• [U-Boot] [U-Boot, v3, 6/6] autoboot: move bootdelay >= 0 check to abortboot()   Tom Rini
• [U-Boot] ti_omap5_common: Find right dtb file for DRA72-RevC Evm   Tom Rini
• [U-Boot] [U-Boot, v2] mmc: increase MMC SDHCI read status timeout   Tom Rini
• [U-Boot] pull request: u-boot-uniphier/master (2nd round)   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.07-rc3 released   Tom Rini
• [U-Boot] [PATCH] SPL: tiny-printf: avoid any BSS usage   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] Please pull ARC changes   Tom Rini
• [U-Boot] Wandboard: u-boot.img is getting too large   Tom Rini
• [U-Boot] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] mmc: msm_sdhci: Set mmc->dev pointer in msm_sdc_probe()   Tom Rini
• [U-Boot] [PATCH 00/11] buildman: Make the tool friendlier for first-time users   Tom Rini
• [U-Boot] [PATCH 01/11] buildman: Tidy up the README a little   Tom Rini
• [U-Boot] [PATCH 05/11] buildman: Improve the toolchain progress/error output   Tom Rini
• [U-Boot] [PATCH 08/11] buildman: Avoid overwriting existing toolchain entries   Tom Rini
• [U-Boot] [PATCH 09/11] buildman: Add a quick-start note   Tom Rini
• [U-Boot] [PATCH 10/11] Drop the MAKEALL tool   Tom Rini
• [U-Boot] [PATCH 11/11] Drop references to MAKEALL in the documentation   Tom Rini
• [U-Boot] [PATCH 00/11] buildman: Make the tool friendlier for first-time users   Tom Rini
• [U-Boot] [PATCH for v2016.07] doc: ARMv8: add README.pine64   Tom Rini
• [U-Boot] [PATCH] test/py: fix CONFIG_ tests   Tom Rini
• [U-Boot] [U-Boot,v2] SPL: tiny-printf: avoid any BSS usage   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [U-Boot,v2] SPL: tiny-printf: avoid any BSS usage   Tom Rini
• [U-Boot] Important patch missing in u-boot master (was: [PATCH] arm: Fix setjmp (again))   Tom Rini
• [U-Boot] arm: Fix setjmp (again)   Tom Rini
• [U-Boot] test/py: strip VT100 codes from match buffer   Tom Rini
• [U-Boot] test/py: support 'memstart =' in u_boot_utils.find_ram_base()   Tom Rini
• [U-Boot] [U-Boot, v2] armv8: Enable CPUECTLR.SMPEN for coherency   Tom Rini
• [U-Boot] [U-Boot,v2] SPL: tiny-printf: avoid any BSS usage   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [U-Boot,for,v2016.07] doc: ARMv8: add README.pine64   Tom Rini
• [U-Boot] [U-Boot, for, v2016.07] mkimage -l is broken for images after gpimage   Tom Rini
• [U-Boot] git-mailrc: add rockchip alias   Tom Rini
• [U-Boot] drivers/crypto/fsl/Makefile: strange assignment   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.07 is released   Tom Rini
• [U-Boot] [PATCH 1/3] COSMETIC: mmc: sdhci: Add CONFIG_ prefix to SDHCI_READ_STATUS_TIMEOUT   Tom Rini
• [U-Boot] [PATCH] ARM: OMAP5+: Enable errata i727   Tom Rini
• [U-Boot] [PATCH] configs: da850evm: enable bootz command   Tom Rini
• [U-Boot] [PATCH] mkimage: fix missing break for -p switch   Tom Rini
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Tom Rini
• [U-Boot] [PATCH v3 0/9] Secure Boot by Authenticating/Decrypting SPL FIT blobs   Tom Rini
• [U-Boot] [PATCH] arm: start.S: Fix startup of dragonboard410c   Tom Rini
• [U-Boot] common: cli_readline: Improve command line editing   Tom Rini
• [U-Boot] update u-boot BDM/JTAG debugger page?   Tom Rini
• [U-Boot] Various, unrelated tree-wide typo fixes.   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] Revert "Revert "rockchip: rk3288: correct sdram setting""   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH v2] rockchip: sdram: Fix register layout for Linux   Tom Rini
• [U-Boot] Various, unrelated tree-wide typo fixes.   Tom Rini
• [U-Boot] [PATCH] configs: Add more CONFIG_ARMV7_PSCI_NR_CPUS entries   Tom Rini
• [U-Boot] update u-boot BDM/JTAG debugger page?   Tom Rini
• [U-Boot] update u-boot BDM/JTAG debugger page?   Tom Rini
• [U-Boot] [PATCH] gdsys: Drop print_fpga_state function   Tom Rini
• [U-Boot] update u-boot BDM/JTAG debugger page?   Tom Rini
• [U-Boot] [U-Boot, 1/2] board_f: init designware watchdog if CONFIG_DESIGNWARE_WATCHDOG=y   Tom Rini
• [U-Boot] [U-Boot, 2/2] board_f: prevent misleading "Watchdog enabled" output   Tom Rini
• [U-Boot] [U-Boot, 1/5] arm: Move check_cache_range() into a common place   Tom Rini
• [U-Boot] [U-Boot, 2/5] arm: Don't invalidate unaligned cache regions   Tom Rini
• [U-Boot] [U-Boot,3/5] Add comments for debug() and pr_fmt   Tom Rini
• [U-Boot] [U-Boot, 4/5] Add warn_non_spl() to show a message in U-Boot proper   Tom Rini
• [U-Boot] [U-Boot, 5/5] arm: Show cache warnings in U-Boot proper only   Tom Rini
• [U-Boot] [U-Boot,v2] rtc: Tidy up the code style   Tom Rini
• [U-Boot] [U-Boot, v2] arm64: add better and more generic spin-table support   Tom Rini
• [U-Boot] [U-Boot, v3, 1/9] arm: cache: add missing dummy functions for when dcache disabled   Tom Rini
• [U-Boot] [U-Boot, v3, 2/9] arm: omap-common: add secure smc entry   Tom Rini
• [U-Boot] [U-Boot, v3, 3/9] arm: omap-common: add secure rom call API for secure devices   Tom Rini
• [U-Boot] [U-Boot, v3, 4/9] arm: omap-common: secure ROM signature verify API   Tom Rini
• [U-Boot] [U-Boot, v3, 5/9] arm: omap-common: Update to generate secure U-Boot FIT blob   Tom Rini
• [U-Boot] [U-Boot, v3, 6/9] spl: fit: add support for post-processing of images   Tom Rini
• [U-Boot] [U-Boot, v3, 7/9] arm: omap5: add U-Boot FIT signing and SPL image post-processing   Tom Rini
• [U-Boot] [U-Boot, v3, 8/9] arm: am4x: add U-Boot FIT signing and SPL image post-processing   Tom Rini
• [U-Boot] [U-Boot, v3, 9/9] doc: Update info on using secure devices from TI   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] types.h: move and redefine resource_size_t   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] arm, nds32, sh: remove useless ioremap()/iounmap() defines   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] linux/io.h: add generic ioremap()/iounmap() defines   Tom Rini
• [U-Boot] [U-Boot, 01/14] mkimage: Honour the default image type with auto-fit   Tom Rini
• [U-Boot] [U-Boot, 02/14] mkimage: Explain the auto-fit imagefile special case   Tom Rini
• [U-Boot] [U-Boot, 03/14] mkimage: Require a data file when auto-fit is used   Tom Rini
• [U-Boot] [U-Boot, 04/14] mkimage: Drop premature setting of params.fit_image_type   Tom Rini
• [U-Boot] [U-Boot,05/14] mkimage: Drop blank line before main()   Tom Rini
• [U-Boot] [U-Boot, 06/14] image: Correct auto-fit architecture property name   Tom Rini
• [U-Boot] [U-Boot, 07/14] image: Convert the IH_... values to enums   Tom Rini
• [U-Boot] [U-Boot, 08/14] image: Create a table of information for each category   Tom Rini
• [U-Boot] [U-Boot,09/14] image: Add a name for invalid types   Tom Rini
• [U-Boot] [U-Boot, 10/14] image: Add functions to obtain category information   Tom Rini
• [U-Boot] [U-Boot, 11/14] mkimage: Allow display of a list of any image header category   Tom Rini
• [U-Boot] [U-Boot, 12/14] mkimage: Use generic code for showing an 'image type' error   Tom Rini
• [U-Boot] [U-Boot, 13/14] mkimage: Show item lists for all categories   Tom Rini
• [U-Boot] [U-Boot, 14/14] tools: Allow building with debug enabled   Tom Rini
• [U-Boot] [U-Boot,01/14] test: Add a README   Tom Rini
• [U-Boot] [U-Boot, 02/14] test: Add a simple script to run tests on sandbox   Tom Rini
• [U-Boot] [U-Boot, 03/14] sandbox: Don't exit when bootm completes   Tom Rini
• [U-Boot] [U-Boot, 04/14] test/py: Allow tests to control the sandbox device-tree file   Tom Rini
• [U-Boot] [U-Boot, 05/14] test/py: Allow RunAndLog() to return the output   Tom Rini
• [U-Boot] [U-Boot, 06/14] test/py: Provide output from exceptions with RunAndLog()   Tom Rini
• [U-Boot] [U-Boot, 07/14] test/py: Return output from run_and_log()   Tom Rini
• [U-Boot] [U-Boot, 08/14] test/py: Add an option to execute a string containing a command   Tom Rini
• [U-Boot] [U-Boot, 09/14] test/py: Provide a way to check that a command fails   Tom Rini
• [U-Boot] [U-Boot, 10/14] test/py: Add a helper to run a list of U-Boot commands   Tom Rini
• [U-Boot] [U-Boot, 10/14] test/py: Add a helper to run a list of U-Boot commands   Tom Rini
• [U-Boot] [U-Boot, 11/14] tools: Add an error code when fit_handle_file() fails   Tom Rini
• [U-Boot] [U-Boot, 12/14] tools: Correct error handling in fit_image_process_hash()   Tom Rini
• [U-Boot] [U-Boot, 13/14] test/py: Fix up after the rename of CONFIG_SYS_HUSH_PARSER   Tom Rini
• [U-Boot] [U-Boot, 14/14] test: Convert the vboot test to test/py   Tom Rini
• [U-Boot] dragonboard410c: prefer sdcard boot over emmc   Tom Rini
• [U-Boot] dragonboard410c: adding missing default addr for script and pxe boot   Tom Rini
• [U-Boot] [U-Boot, 1/3] stm32: clk: Add 200MHz clock configuration for stm32f746 discovery board   Tom Rini
• [U-Boot] [U-Boot, 2/3] stm32: Add SDRAM support for stm32f746 discovery board   Tom Rini
• [U-Boot] [U-Boot, 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board   Tom Rini
• [U-Boot] bootm: fixup silent Linux out of BOOTM_STATE_LOADOS state   Tom Rini
• [U-Boot] mkimage: fix missing break for -p switch   Tom Rini
• [U-Boot] ARM: OMAP5+: Enable errata i727   Tom Rini
• [U-Boot] configs: da850evm: enable bootz command   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH v2] Various, unrelated tree-wide typo fixes.   Tom Rini
• [U-Boot] [PATCH] configs: Add more CONFIG_ARMV7_PSCI_NR_CPUS entries   Tom Rini
• [U-Boot] is minicom still discouraged as the serial comms program?   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH] test: Adjust the of-platdata test run condition   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH 01/14] omap4: i2c: correct register offset for sync register   Tom Rini
• [U-Boot] [PATCH 02/14] omap5/dra7: i2c: correct register offset for sync register   Tom Rini
• [U-Boot] [PATCH 04/14] ti_armv7_common: i2c: do not define DM_I2C for spl   Tom Rini
• [U-Boot] [PATCH 07/14] defconfig: am335x_boneblack_vboot: enable i2c driver model   Tom Rini
• [U-Boot] [PATCH 08/14] defconfig: am335x_evm: enable i2c driver model   Tom Rini
• [U-Boot] [PATCH 09/14] defconfig: am43xx_evm: enable i2c driver model   Tom Rini
• [U-Boot] [PATCH 10/14] defconfig: am43xx_hs_evm: enable i2c driver model   Tom Rini
• [U-Boot] [PATCH 11/14] defconfig: dra7xx_evm: enable i2c driver model   Tom Rini
• [U-Boot] [PATCH 12/14] defconfig: dra7xx_hs_evm: enable i2c driver model   Tom Rini
• [U-Boot] [PATCH 13/14] defconfig: am57xx_evm: enable i2c driver model   Tom Rini
• [U-Boot] supported image compression types?   Tom Rini
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Tom Rini
• [U-Boot] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Tom Rini
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Tom Rini
• [U-Boot] [PATCH v2 5/9] mx7: set soc environment according to exact SoC type   Tom Rini
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Tom Rini
• [U-Boot] [v2 1/1] wandboard: fix dtb file names.   Tom Rini
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: Add save_boot_params for ARMv8   Tom Rini
• [U-Boot] [PATCH] spl: fit: Fix the number of bytes read in raw mode   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [Urgent Problem] ARM64 Linux fails to boot with initramdisk with uImage header   Tom Rini
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Tom Rini
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Tom Rini
• [U-Boot] [Urgent Problem] ARM64 Linux fails to boot with initramdisk with uImage header   Tom Rini
• [U-Boot] Pull request: u-boot-sh/rmobile   Tom Rini
• [U-Boot] what is the *recommended* split between defconfig file and header file?   Tom Rini
• [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig   Tom Rini
• [U-Boot] [PATCH v2] image: fix IH_ARCH_... values for uImage compatibility   Tom Rini
• [U-Boot] Pull request: u-boot-sh master   Tom Rini
• [U-Boot] [PATCH 1/2] arm: am4x: fix build dependency for secure devices   Tom Rini
• [U-Boot] [PATCH 2/2] arm: omap5: fix build dependency for secure devices   Tom Rini
• [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: Add save_boot_params for ARMv8   Tom Rini
• [U-Boot] [U-Boot, 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board   Tom Rini
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Tom Rini
• [U-Boot] [PATCH v6 1/4] ARMv7: PSCI: add PSCI v1.0 functions skeleton   Tom Rini
• [U-Boot] [RFC PATCH v2 1/5] spl: dfu: add dfu support in SPL   Tom Rini
• [U-Boot] [RFC PATCH v2 2/5] common: dfu: saperate the dfu common functionality   Tom Rini
• [U-Boot] [RFC PATCH v2 3/5] spl: dfu: adding dfu support functions for SPL-DFU   Tom Rini
• [U-Boot] [RFC PATCH v2 4/5] dra7x: boot: add dfu bootmode support   Tom Rini
• [U-Boot] [RFC PATCH v2 5/5] dra7x: configs: enable SPL-DFU support   Tom Rini
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   Tom Rini
• [U-Boot] [PATCH 0/2] am33xx/am437x u-boot DDR init fixes   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: am33xx: Fix DDR init delay placement   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: am33xx: Always inhibit init/refresh during DDR phy init   Tom Rini
• [U-Boot] [PATCH v2 1/3] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code"   Tom Rini
• [U-Boot] [PATCH v2 1/3] Revert "arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code"   Tom Rini
• [U-Boot] [PATCH 1/1] ext4: Refuse to mount filesystems with 64bit feature set   Tom Rini
• [U-Boot] [PATCH 1/1] ext4: Refuse to mount filesystems with 64bit feature set   Tom Rini
• [U-Boot] [PATCH 1/5] sandbox: Add instructions about building on 32-bit machines   Tom Rini
• [U-Boot] [PATCH 2/5] lzmadec: Use the same type as the lzma call   Tom Rini
• [U-Boot] [PATCH 3/5] part_efi: Fix compiler warning on 32-bit sandbox   Tom Rini
• [U-Boot] [PATCH 4/5] hashtable: Fix compiler warning on 32-bit sandbox   Tom Rini
• [U-Boot] [PATCH 5/5] dtoc: Correct the type widening code in fdt_fallback   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [GIT PULL] Xilinx changes   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] tools/env: return with error if redundant environments have unequal size   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [U-Boot,v2] i2c_eeprom: Add reading support   Tom Rini
• [U-Boot] [U-Boot, v5, 01/26] mtd: Sort subsystem directories aplhabeticaly in Makefile   Tom Rini
• [U-Boot] [U-Boot, v5, 02/26] nand_spl_simple: Add a simple NAND read function   Tom Rini
• [U-Boot] [U-Boot, v5, 03/26] onenand_spl_simple: Add a simple OneNAND read function   Tom Rini
• [U-Boot] [U-Boot, v5, 04/26] spl: Lightweight UBI and UBI fastmap support   Tom Rini
• [U-Boot] [U-Boot, v5, 05/26] spl: support loading from UBI volumes   Tom Rini
• [U-Boot] [U-Boot,v5,06/26] spl: zImage support in Falcon mode   Tom Rini
• [U-Boot] [U-Boot, v5, 07/26] armv7: add reset timeout to identify_nand_chip   Tom Rini
• [U-Boot] [U-Boot,v5,08/26] armv7: make gpmc_cfg const   Tom Rini
• [U-Boot] [U-Boot, v5, 09/26] armv7: armv7: introduce set_gpmc_cs0   Tom Rini
• [U-Boot] [U-Boot,v5,10/26] armv7: simplify identify_nand_chip   Tom Rini
• [U-Boot] [U-Boot, v5, 11/26] mtd: OneNAND: add timeout to wait ready loops   Tom Rini
• [U-Boot] [U-Boot, v5, 12/26] mtd: OneNAND: allow board init function fail   Tom Rini
• [U-Boot] [U-Boot, v5, 13/26] mtd: OneNAND: initialize mtd->writebufsize to let UBI work   Tom Rini
• [U-Boot] [U-Boot, v5, 14/26] cmd: mtdparts: fix mtdparts variable presence confusion in mtdparts_init   Tom Rini
• [U-Boot] [U-Boot, v5, 15/26] cmd: mtdparts: fix null pointer dereference in parse_mtdparts   Tom Rini
• [U-Boot] [U-Boot, v5, 16/26] cmd: mtdparts: consolidate mtdparts reading from env   Tom Rini
• [U-Boot] [U-Boot, v5, 17/26] cmd: mtdparts: use defaults by default   Tom Rini
• [U-Boot] [U-Boot, v5, 18/26] cmd: mtdparts: support runtime generated mtdparts   Tom Rini
• [U-Boot] [U-Boot,v5,19/26] igep00x0: move sysinfo into C file   Tom Rini
• [U-Boot] [U-Boot, v5, 20/26] igep00x0: reorder lan9221 code to remove ifdefs   Tom Rini
• [U-Boot] [U-Boot, v5, 21/26] igep00x0: remove useless setup_net_chip declaration   Tom Rini
• [U-Boot] [U-Boot, v5, 22/26] igep00x0: remove unused empty function omap_rev_string()   Tom Rini
• [U-Boot] [U-Boot,v5,23/26] igep00x0: runtime flash detection   Tom Rini
• [U-Boot] [U-Boot,v5,24/26] igep00x0: UBIize   Tom Rini
• [U-Boot] [U-Boot,v5,24/26] igep00x0: UBIize   Tom Rini
• [U-Boot] [U-Boot, v5, 25/26] igep00x0: generate default mtdparts according NAND chip used   Tom Rini
• [U-Boot] [U-Boot,v5,26/26] igep00x0: Falcon mode   Tom Rini
• [U-Boot] [U-Boot, 1/2] tools/env: complete environment device config early   Tom Rini
• [U-Boot] [U-Boot,2/2] tools/env: allow negative offsets   Tom Rini
• [U-Boot] gdsys: Drop print_fpga_state function   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] tools/env: kernel-doc for fw_printenv, fw_getenv and fw_parse_script   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] tools/env: move envmatch further up in file to avoid forward declarations   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] tools/env: reuse fw_getenv in fw_printenv function   Tom Rini
• [U-Boot] [U-Boot, v2] efi_loader: Add debug output for efi_add_memory_map()   Tom Rini
• [U-Boot] test/py: vboot can be run only at Sandbox   Tom Rini
• [U-Boot] [U-Boot, v3] armv8: spl: Call board_init_r from crt0_64 in SPL   Tom Rini
• [U-Boot] test/py: use absolute dts path in vboot test   Tom Rini
• [U-Boot] [U-Boot, 1/2] tools: Fix return code of fit_image_process_sig()   Tom Rini
• [U-Boot] [U-Boot, 1/2] tools: Fix return code of fit_image_process_sig()   Tom Rini
• [U-Boot] [U-Boot,2/2] rsa: Fix return value and masked error   Tom Rini
• [U-Boot] spl: fit: Fix the number of bytes read in raw mode   Tom Rini
• [U-Boot] fixing typo error in README file. CPU15 -> CP15   Tom Rini
• [U-Boot] [U-Boot, 1/2] arm: am4x: fix build dependency for secure devices   Tom Rini
• [U-Boot] [U-Boot, 2/2] arm: omap5: fix build dependency for secure devices   Tom Rini
• [U-Boot] iso: Fix part info command   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH 1/4] tools: moveconfig: trim garbage lines after header cleanups   Tom Rini
• [U-Boot] [PATCH] tree-wide: move CONFIG_PHYS_64BIT to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 1/8] tools: moveconfig: do not cleanup headers in include/generated   Tom Rini
• [U-Boot] [PATCH v2 2/8] tools: moveconfig: do not check clean tree and compilers for -H option   Tom Rini
• [U-Boot] [PATCH v2 6/8] tools: moveconfig: fix cleanup of defines across multiple lines   Tom Rini
• [U-Boot] [PATCH v2 8/8] tools: moveconfig: support CONFIG_SYS_EXTRA_OPTIONS cleaning   Tom Rini
• [U-Boot] [PATCH v2 5/8] tools: moveconfig: show diffs of cleaned headers in color   Tom Rini
• [U-Boot] [PATCH v2 7/8] tools: moveconfig: make getting all defconfigs into helper function   Tom Rini
• [U-Boot] [PATCH 0/4] dra7xx: QSPI: Increase SPI bus speed.   Tom Rini
• [U-Boot] [PATCH 1/4] ARM: dra7xx: Change DPLL_PER_HS13 divider value   Tom Rini
• [U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock   Tom Rini
• [U-Boot] [PATCH 3/4] configs: dra7xx: Update QSPI speed to 76.8MHz   Tom Rini
• [U-Boot] [PATCH 4/4] ARM: dts: dra7xx: Update spi-max-frequency for QSPI   Tom Rini
• [U-Boot] [PATCH 1/4] gpio: Add driver for TI PCF8575 I2C GPIO expander   Tom Rini
• [U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575   Tom Rini
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Tom Rini
• [U-Boot] [PATCH 4/4] ARM: dts: dra72-evm: Add mode-gpios entry for mac node   Tom Rini
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   Tom Rini
• [U-Boot] [PATCH] spl_nor.c: Support devicetree sizes different from 16k   Tom Rini
• [U-Boot] a few questions about saving bootcount in the environment   Tom Rini
• [U-Boot] [RFC PATCH v2 4/5] dra7x: boot: add dfu bootmode support   Tom Rini
• [U-Boot] Passing information from SPL to next stage   Tom Rini
• [U-Boot] [PATCH 0/3] Some Kconfig move/fixups   Tom Rini
• [U-Boot] [PATCH 3/3] arm64: thunderx_88xx_defconfig: remove unneeded CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   Tom Rini
• [U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL   Tom Rini
• [U-Boot] Please pull: u-boot-video/master   Tom Rini
• [U-Boot] [PATCH 1/2] sandbox: Migrate CONFIG_I2C_EEPROM   Tom Rini
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Tom Rini
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] tools: Fix return code of fit_image_process_sig()   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] rsa: Fix return value and masked error   Tom Rini
• [U-Boot] cmd: misc: Add support for fractions in sleep   Tom Rini
• [U-Boot] [U-Boot, v3] keystone: k2h/e/l: Fix DMA coherency for QM PDSP   Tom Rini
• [U-Boot] [U-Boot, v2] common: fit: Allow U-Boot images to be booted   Tom Rini
• [U-Boot] efi_loader: Make exposed image loader path absolute   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: am33xx: Fix DDR init delay placement   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: am33xx: Always inhibit init/refresh during DDR phy init   Tom Rini
• [U-Boot] [U-Boot, 1/5] sandbox: Add instructions about building on 32-bit machines   Tom Rini
• [U-Boot] [U-Boot, 2/5] lzmadec: Use the same type as the lzma call   Tom Rini
• [U-Boot] [U-Boot, 3/5] part_efi: Fix compiler warning on 32-bit sandbox   Tom Rini
• [U-Boot] [U-Boot, 4/5] hashtable: Fix compiler warning on 32-bit sandbox   Tom Rini
• [U-Boot] [U-Boot, 5/5] dtoc: Correct the type widening code in fdt_fallback   Tom Rini
• [U-Boot] [U-Boot, 3/3] arm64: thunderx_88xx_defconfig: remove unneeded CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] [PATCH 1/2] sandbox: Migrate CONFIG_I2C_EEPROM   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.09-rc1 released   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.09-rc1 released   Tom Rini
• [U-Boot] [PATCH v2] spl_nor.c: Support devicetree sizes different from 16k   Tom Rini
• [U-Boot] [PATCH 3/4] net: cpsw: Add support to drive gpios for ethernet to be functional   Tom Rini
• [U-Boot] [PATCH v2] spl_nor.c: Support devicetree sizes different from 16k   Tom Rini
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Tom Rini
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Tom Rini
• [U-Boot] Stepping down as sunxi u-boot custodian   Tom Rini
• [U-Boot] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Please pull u-boot-mpc86xx master   Tom Rini
• [U-Boot] ARM: uniphier: move CONFIG_I2C_EEPROM to defconfig   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Tom Rini
• [U-Boot] Stepping down as sunxi u-boot custodian   Tom Rini
• [U-Boot] [RFC PATCH v2 1/5] spl: dfu: add dfu support in SPL   Tom Rini
• [U-Boot] Stepping down as sunxi u-boot custodian   Tom Rini
• [U-Boot] Please pull: u-boot-video/master   Tom Rini
• [U-Boot] [PATCH 1/3] omap3: Move to select SUPPORT_SPL for all   Tom Rini
• [U-Boot] [PATCH 2/3] omap3, omap4: Enable USE_TINY_PRINTF for all   Tom Rini
• [U-Boot] [PATCH 3/3] omap3: Drop omap3_evm_quick_* targets   Tom Rini
• [U-Boot] [PATCH v2 00/11] buildman: Make the tool friendlier for first-time users   Tom Rini
• [U-Boot] [PATCH v2 02/11] buildman: Automatically create a config file if needed   Tom Rini
• [U-Boot] [PATCH v2 06/11] buildman: Fix a typo in TestSettingsHasPath()   Tom Rini
• [U-Boot] [PATCH v2 08/11] buildman: Avoid overwriting existing toolchain entries   Tom Rini
• [U-Boot] [PATCH v2 09/11] buildman: Add a quick-start note   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [RFC PATCH v2 1/5] spl: dfu: add dfu support in SPL   Tom Rini
• [U-Boot] [PATCH 0/2] ARM: Introduce function to switch to hypervisor mode   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: Introduce function to switch to hypervisor mode   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: OMAP5+: Override switch_to_hypervisor function   Tom Rini
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Tom Rini
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Tom Rini
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Tom Rini
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Tom Rini
• [U-Boot] [PATCH] configs: am43xx_evm_defconfig: Enable CONFIG_SPI_FLASH_BAR   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] common: image: Add support for post-processing of images   Tom Rini
• [U-Boot] [PATCH v2 1/7] cmd/bdinfo: extract print_bi_boot_params   Tom Rini
• [U-Boot] [PATCH v2 2/7] cmd/bdinfo: extract print_bi_mem   Tom Rini
• [U-Boot] [PATCH v2 3/7] cmd/bdinfo: extract print_bi_dram   Tom Rini
• [U-Boot] [PATCH v2 4/7] cmd/bdinfo: extract print_bi_flash   Tom Rini
• [U-Boot] [PATCH v2 5/7] cmd/bdinfo: extract print_eth_ip_addr   Tom Rini
• [U-Boot] [PATCH v2 6/7] cmd/bdinfo: extract print_baudrate   Tom Rini
• [U-Boot] [PATCH v2 7/7] cmd/bdinfo: extract print_std_bdinfo   Tom Rini
• [U-Boot] Disable command at runtime   Tom Rini
• [U-Boot] [PATCH v2 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575   Tom Rini
• [U-Boot] [PATCH v2 1/2] ARM: am57xx_evm: Enable QSPI support   Tom Rini
• [U-Boot] [PATCH v2 2/2] ARM: dts: am57xx-idk-common: Enable support for QSPI   Tom Rini
• [U-Boot] Disable command at runtime   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH] armv8: ls2080a/ls1043a/ls1012a: enable support for booti   Tom Rini
• [U-Boot] pull request: u-boot-coldfire/master   Tom Rini
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Tom Rini
• [U-Boot] [PATCH 0/3] Some Kconfig move/fixups   Tom Rini
• [U-Boot] [PATCH 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig   Tom Rini
• [U-Boot] [PATCH v4 00/13] cmd: fdt: Add device tree overlays support   Maxime Ripard
• [U-Boot] [PATCH v4 01/13] cmd: fdt: Narrow the check for fdt addr   Maxime Ripard
• [U-Boot] [PATCH v4 02/13] scripts: Makefile.lib: Sanitize DTB names   Maxime Ripard
• [U-Boot] [PATCH v4 03/13] vsprintf: Include stdarg for va_list   Maxime Ripard
• [U-Boot] [PATCH v4 04/13] libfdt: Add new headers and defines   Maxime Ripard
• [U-Boot] [PATCH v4 05/13] libfdt: Add iterator over properties   Maxime Ripard
• [U-Boot] [PATCH v4 06/13] libfdt: Add max phandle retrieval function   Maxime Ripard
• [U-Boot] [PATCH v4 07/13] libfdt: Fix separator spelling   Maxime Ripard
• [U-Boot] [PATCH v4 08/13] libfdt: Add fdt_path_offset_namelen   Maxime Ripard
• [U-Boot] [PATCH v4 09/13] libfdt: Add fdt_getprop_namelen_w   Maxime Ripard
• [U-Boot] [PATCH v4 10/13] libfdt: Add fdt_setprop_inplace_namelen_partial   Maxime Ripard
• [U-Boot] [PATCH v4 11/13] libfdt: Add overlay application function   Maxime Ripard
• [U-Boot] [PATCH v4 12/13] cmd: fdt: add fdt overlay application subcommand   Maxime Ripard
• [U-Boot] [PATCH v4 13/13] tests: Introduce DT overlay tests   Maxime Ripard
• [U-Boot] [PATCH v4 07/13] libfdt: Fix separator spelling   Maxime Ripard
• [U-Boot] [PATCH v4 09/13] libfdt: Add fdt_getprop_namelen_w   Maxime Ripard
• [U-Boot] Stepping down as sunxi u-boot custodian   Maxime Ripard
• [U-Boot] Stepping down as sunxi u-boot custodian   Maxime Ripard
• [U-Boot] 2016.07 regression on Orange Pi PC   Peter Robinson
• [U-Boot] 2016.07 regression on Orange Pi PC   Peter Robinson
• [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support   Peter Robinson
• [U-Boot] [PATCH] warp7: Increase CONFIG_BOOTDELAY   Peter Robinson
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Stefan Roese
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Stefan Roese
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Stefan Roese
• [U-Boot] BayTrail PCIe x4 slot (Soft-Strap?)   Stefan Roese
• [U-Boot] [PATCH] misc: Add simple driver for some Nuvoton NCT6102D devices   Stefan Roese
• [U-Boot] [PATCH] serial: ns16550: Add support for the BayTrail internal HS UART   Stefan Roese
• [U-Boot] [PATCH 1/2] x86: Add DFI BT700 BayTrail board support   Stefan Roese
• [U-Boot] [PATCH 2/2] x86: Add theadorable-x86-dfi-bt700 board support   Stefan Roese
• [U-Boot] xHCI on x86   Stefan Roese
• [U-Boot] [PATCH] x86: doc: Add note about the debug FSP usage on BayTrail   Stefan Roese
• [U-Boot] [PATCH] misc: Add simple driver for some Nuvoton NCT6102D devices   Stefan Roese
• [U-Boot] [PATCH v2] misc: Add simple driver for some Nuvoton NCT6102D devices   Stefan Roese
• [U-Boot] [PATCH] serial: ns16550: Add support for the BayTrail internal HS UART   Stefan Roese
• [U-Boot] [PATCH 1/2 v2] x86: Add DFI BT700 BayTrail board support   Stefan Roese
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Stefan Roese
• [U-Boot] xHCI on x86   Stefan Roese
• [U-Boot] [PATCH] WIP: usb: xhci-pci: Add DM support   Stefan Roese
• [U-Boot] [PATCH] x86: cache.h: Add default for CONFIG_SYS_CACHELINE_SIZE   Stefan Roese
• [U-Boot] [PATCH] serial: ns16550: Add support for the BayTrail internal HS UART   Stefan Roese
• [U-Boot] [PATCH] x86: baytrail: Add SIO HS-UART clock setup   Stefan Roese
• [U-Boot] [PATCH v2] x86: baytrail: Add SIO HS-UART clock setup   Stefan Roese
• [U-Boot] [PATCH v3] misc: Add simple driver for some Nuvoton NCT6102D devices   Stefan Roese
• [U-Boot] [PATCH 1/2 v3] x86: Add DFI BT700 BayTrail board support   Stefan Roese
• [U-Boot] [PATCH] mtd: cfi_flash: fix polling for bit XSR.7 on Intel chips   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH 10/13] i2c: mvtwsi: Add compatibility to DM   Stefan Roese
• [U-Boot] [PATCH v2] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Stefan Roese
• [U-Boot] [PATCH] tree-wide: move CONFIG_PHYS_64BIT to Kconfig   Stefan Roese
• [U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)   Stefan Roese
• [U-Boot] [PATCH v2] net: usb: r8152: Add DM support   Stefan Roese
• [U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail)   Stefan Roese
• [U-Boot] where *precisely* is u-boot's environment stored?   Måns Rullgård
• [U-Boot] where *precisely* is u-boot's environment stored?   Måns Rullgård
• [U-Boot] is minicom still discouraged as the serial comms program?   Måns Rullgård
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Otavio Salvador
• [U-Boot] [PATCH] wandboard: move environment partition farther from u-boot.img   Otavio Salvador
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Otavio Salvador
• [U-Boot] [PATCH v2 4/9] usb: ehci-mx6: introduce config for high active power pin   Otavio Salvador
• [U-Boot] [PATCH] warp7: Increase CONFIG_BOOTDELAY   Otavio Salvador
• [U-Boot] [PATCH 5/5] cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE   Otavio Salvador
• [U-Boot] NXP QorIQ LS1021A-IoT board support   Otavio Salvador
• [U-Boot] [PATCH] dragonboard410c: prefer sdcard boot over emmc   Ricardo Salveti
• [U-Boot] [PATCH] dragonboard410c: adding missing default addr for script and pxe boot   Ricardo Salveti
• [U-Boot] timing_cfg_2 register in FSL DDR driver   Thomas Schaefer
• [U-Boot] [RFC PATCH] cmd: gpt: add - partition size parsing   Julian Scheel
• [U-Boot] [PATCH] cmd: gpt: fix the wrong size parse for the last partition   Julian Scheel
• [U-Boot] [PATCH 0/2] Fix gpt write regression   Julian Scheel
• [U-Boot] [PATCH 1/2] Revert "cmd: gpt: add - partition size parsing"   Julian Scheel
• [U-Boot] [PATCH 2/2] disk: part_efi: Omit size on verify for partitions without size   Julian Scheel
• [U-Boot] [PATCH] driver/net/fec: support fixed speed connection   Hannes Schmelzer
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Hannes Schmelzer
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Hannes Schmelzer
• [U-Boot] [PATCH] arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite   Hannes Schmelzer
• [U-Boot] [PATCH 2/5] aristainetos: Use imx_ddr_size() for calculating the DDR size   Heiko Schocher
• [U-Boot] confused by "upgrade_available=0\0" in include/configs/taurus.h   Heiko Schocher
• [U-Boot] a few questions about saving bootcount in the environment   Heiko Schocher
• [U-Boot] a few questions about saving bootcount in the environment   Heiko Schocher
• [U-Boot] [RFC PATCH] i2c: i2c-uclass-compat: avoid any BSS usage   Heiko Schocher
• [U-Boot] [U-Boot, 2/2] tools: env: Add support for direct read/write UBI volumes   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] a few questions about saving bootcount in the environment   Heiko Schocher
• [U-Boot] [PATCH 01/30] x86: Add debugging when a microcode update fails   Heiko Schocher
• [U-Boot] [PATCH 23/30] binman: Introduce binman, a tool for building binary images   Heiko Schocher
• [U-Boot] a few questions about saving bootcount in the environment   Heiko Schocher
• [U-Boot] [RFC PATCH] i2c: i2c-uclass-compat: avoid any BSS usage   Heiko Schocher
• [U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver   Heiko Schocher
• [U-Boot] [PATCH v9] mmc: atmel_sdhci: Convert to the driver model support   Heiko Schocher
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Daniel Schwierzeck
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Daniel Schwierzeck
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Daniel Schwierzeck
• [U-Boot] [PATCH] test/py: support 'memstart =' in u_boot_utils.find_ram_base()   Daniel Schwierzeck
• [U-Boot] [PATCH] test/py: support 'memstart =' in u_boot_utils.find_ram_base()   Daniel Schwierzeck
• [U-Boot] [PATCH] mtd: cfi_flash: fix polling for bit XSR.7 on Intel chips   Daniel Schwierzeck
• [U-Boot] [mips][cfi] Unable to write into flash under qemu   Daniel Schwierzeck
• [U-Boot] [PATCH 7/7] boston: Introduce support for the MIPS Boston development board   Daniel Schwierzeck
• [U-Boot] [PATCH 1/3] net: emaclite: Use ioremap_nocache   Daniel Schwierzeck
• [U-Boot] [PATCH 2/2] mips: xilfpga: Add device tree files   Daniel Schwierzeck
• [U-Boot] [PATCH 1/2] mips: Add MIPSfpga platform support   Daniel Schwierzeck
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Daniel Schwierzeck
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Daniel Schwierzeck
• [U-Boot] [PATCH 1/3] net: emaclite: Use ioremap_nocache   Daniel Schwierzeck
• [U-Boot] [PATCH 2/3] net: emaclite: use __raw_readl/writel instead of weird define   Daniel Schwierzeck
• [U-Boot] [PATCH 3/3] net: emaclite: Enable driver for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH_v2 1/2] mips: xilfpga: Add device tree files   Daniel Schwierzeck
• [U-Boot] [PATCH_v2 2/2] mips: Add MIPSfpga platform support   Daniel Schwierzeck
• [U-Boot] [PATCH v2] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Chin Liang See
• [U-Boot] nand bad block identification   Ran Shalit
• [U-Boot] Q: erase.raw for NAND ?   Ran Shalit
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Siarhei Siamashka
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Siarhei Siamashka
• [U-Boot] [PATCH v2] sun8i: On H3 Use words 1-3 instead of just word 3 from the SID   Siarhei Siamashka
• [U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel   Michal Simek
• [U-Boot] [PATCH 7/8] net/ethoc: don't advertise gigabit on the connected PHY   Michal Simek
• [U-Boot] [PATCH 8/8] xtensa: add support for the 'xtfpga' evaluation board   Michal Simek
• [U-Boot] [PATCH] dm: clk: Remove simple version of clk_get_by_index()   Michal Simek
• [U-Boot] [PATCH 1/3] ARM64: zynqmp: Enable CLK and SPL_CLK by default   Michal Simek
• [U-Boot] [PATCH 2/3] serial: zynq: Read information about clock from DT   Michal Simek
• [U-Boot] [PATCH 3/3] ARM64: zynqmp: Remove get_uart_clk()   Michal Simek
• [U-Boot] [PATCH] dm: clk: Remove simple version of clk_get_by_index()   Michal Simek
• [U-Boot] [PATCH] spl: Fix compilation warnings for arm64   Michal Simek
• [U-Boot] [PATCH] ARM64: zynqmp: Enable SPL for all zynqmp boards   Michal Simek
• [U-Boot] [PATCH v2] dm: clk: Remove simple version of clk_get_by_index/name()   Michal Simek
• [U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option   Michal Simek
• [U-Boot] [PATCH] libfdt: Add option to disable arch_fixup_fdt() calls   Michal Simek
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Michal Simek
• [U-Boot] [PATCH v2] dm: clk: Remove simple version of clk_get_by_index/name()   Michal Simek
• [U-Boot] [PATCH] spl: Fix compilation warnings for arm64   Michal Simek
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Michal Simek
• [U-Boot] [PATCH v3] dm: clk: Remove simple version of clk_get_by_index/name()   Michal Simek
• [U-Boot] [PATCH v2] dm: clk: Remove simple version of clk_get_by_index/name()   Michal Simek
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Michal Simek
• [U-Boot] [PATCH] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ   Michal Simek
• [U-Boot] UBIFS broken on Microblaze architecture and possibly on other architectrures as well   Michal Simek
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Michal Simek
• [U-Boot] [PATCH v2] image: fix IH_ARCH_... values for uImage compatibility   Michal Simek
• [U-Boot] [PATCH] microblaze: Remove empty ifdef around caches   Michal Simek
• [U-Boot] [PATCH] ARM64: zynqmp: Enable AHCI on EP platform   Michal Simek
• [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig   Michal Simek
• [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig   Michal Simek
• [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig   Michal Simek
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Michal Simek
• [U-Boot] [PATCH] spl: Fix compilation warnings for arm64   Michal Simek
• [U-Boot] [PATCH 2/2] zynq: defconfig: Remove unnecessary board specifc config files   Michal Simek
• [U-Boot] [PATCH v2] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ   Michal Simek
• [U-Boot] [PATCH] usb: zynq: Define config USB_STORAGE through defconfig   Michal Simek
• [U-Boot] [GIT PULL] Xilinx changes   Michal Simek
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Michal Simek
• [U-Boot] [PATCH 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig   Michal Simek
• [U-Boot] [PATCH] ARM64: zynqmp: Wire up PSCI reset   Michal Simek
• [U-Boot] [PATCH 1/2] xilinx: Sync defconfigs with the latest Kconfig layout   Michal Simek
• [U-Boot] [PATCH 2/2] ARM64: zynqmp: Define config USB_STORAGE through defconfig   Michal Simek
• [U-Boot] [PATCH v3] libfdt: Introduce new ARCH_FIXUP_FDT option   Michal Simek
• [U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option   Michal Simek
• [U-Boot] [PATCH] ARM64: zynqmp: Fix stack pointer initialization   Michal Simek
• [U-Boot] [PATCH 2/3] zynqmp: Move config IDENT_STRING to defconfig   Michal Simek
• [U-Boot] [PATCH v2 02/13] dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()   Michal Simek
• [U-Boot] [PATCH] ARM64: zynqmp: Add u-boot, dm-pre-reloc to clk nodes   Michal Simek
• [U-Boot] [PATCH 00/13] i2c: mvtwsi: DM conversion and improvements   Mario Six
• [U-Boot] [PATCH 01/13] i2c: mvtwsi: Fix style violations   Mario Six
• [U-Boot] [PATCH 02/13] i2c: mvtwsi: Streamline code and add documentation   Mario Six
• [U-Boot] [PATCH 03/13] i2c: mvtwsi: Improve and fix comments   Mario Six
• [U-Boot] [PATCH 04/13] i2c: mvtwsi: Eliminate flags parameter   Mario Six
• [U-Boot] [PATCH 05/13] i2c: mvtwsi: Get rid of status parameter   Mario Six
• [U-Boot] [PATCH 06/13] i2c: mvtwsi: Use 'uint' instead of 'unsigned int'   Mario Six
• [U-Boot] [PATCH 07/13] i2c: mvtwsi: Add compatibility functions   Mario Six
• [U-Boot] [PATCH 08/13] i2c: mvtwsi: Factor out adap parameter   Mario Six
• [U-Boot] [PATCH 09/13] i2c: mvtwsi: Make address length variable   Mario Six
• [U-Boot] [PATCH 10/13] i2c: mvtwsi: Add compatibility to DM   Mario Six
• [U-Boot] [PATCH 11/13] i2c: mvtwsi: Handle zero-length offsets properly   Mario Six
• [U-Boot] [PATCH 12/13] i2c: mvtwsi: Make delay times frequency-dependent   Mario Six
• [U-Boot] [PATCH 13/13] i2c: mvtwsi: Add documentation   Mario Six
• [U-Boot] [PATCH] tpm: atmel_twi: Make compatible with DM I2C busses   Mario Six
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH 0/2] Fix signing problems with large keys   Mario Six
• [U-Boot] [PATCH 1/2] tools: Fix return code of fit_image_process_sig()   Mario Six
• [U-Boot] [PATCH 2/2] rsa: Fix return value and masked error   Mario Six
• [U-Boot] [PATCH] cmd: misc: Add support for fractions in sleep   Mario Six
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH v2] common: fit: Allow U-Boot images to be booted   Mario Six
• [U-Boot] [PATCH 10/13] i2c: mvtwsi: Add compatibility to DM   Mario Six
• [U-Boot] [PATCH v2 00/13] i2c: mvtwsi: DM conversion and improvements   Mario Six
• [U-Boot] [PATCH v2 01/13] i2c: mvtwsi: Fix style violations   Mario Six
• [U-Boot] [PATCH v2 02/13] i2c: mvtwsi: Streamline code and add documentation   Mario Six
• [U-Boot] [PATCH v2 03/13] i2c: mvtwsi: Improve and fix comments   Mario Six
• [U-Boot] [PATCH v2 04/13] i2c: mvtwsi: Eliminate flags parameter   Mario Six
• [U-Boot] [PATCH v2 05/13] i2c: mvtwsi: Get rid of status parameter   Mario Six
• [U-Boot] [PATCH v2 06/13] i2c: mvtwsi: Use 'uint' instead of 'unsigned int'   Mario Six
• [U-Boot] [PATCH v2 07/13] i2c: mvtwsi: Add compatibility functions   Mario Six
• [U-Boot] [PATCH v2 08/13] i2c: mvtwsi: Factor out adap parameter   Mario Six
• [U-Boot] [PATCH v2 09/13] i2c: mvtwsi: Make address length variable   Mario Six
• [U-Boot] [PATCH v2 10/13] i2c: mvtwsi: Add compatibility to DM   Mario Six
• [U-Boot] [PATCH v2 11/13] i2c: mvtwsi: Handle zero-length offsets properly   Mario Six
• [U-Boot] [PATCH v2 12/13] i2c: mvtwsi: Make delay times frequency-dependent   Mario Six
• [U-Boot] [PATCH v2 13/13] i2c: mvtwsi: Add documentation   Mario Six
• [U-Boot] [PATCH 1/2] tools: Fix return code of fit_image_process_sig()   Mario Six
• [U-Boot] [PATCH v2 0/2] Fix signing problems with large keys   Mario Six
• [U-Boot] [PATCH v2 1/2] tools: Fix return code of fit_image_process_sig()   Mario Six
• [U-Boot] [PATCH v2 2/2] rsa: Fix return value and masked error   Mario Six
• [U-Boot] build error   Richard Snow
• [U-Boot] [PATCH] armv8: ls1043a: add pxe commands   Wenbin Song
• [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme   Wenbin Song
• [U-Boot] [PATCH 2/3] ARM: board: cm_fx6: fixup mtd partitions in the fdt   Christopher Spinrath
• [U-Boot] [PATCH 2/3] ARM: board: cm_fx6: fixup mtd partitions in the fdt   Christopher Spinrath
• [U-Boot] [PATCH v2 1/3] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Heiko Stuebner
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Heiko Stuebner
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Heiko Stuebner
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Heiko Stuebner
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Heiko Stuebner
• [U-Boot] [PATCH 1/9] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Heiko Stuebner
• [U-Boot] [PATCH 2/9] cosmetic: rockchip: rk3036: pinctrl: fix config symbol naming   Heiko Stuebner
• [U-Boot] [PATCH 3/9] cosmetic: rockchip: sort socs according to numbers   Heiko Stuebner
• [U-Boot] [PATCH 4/9] cosmetic: rockchip: rk3288: rename rkclk_configure_cpu   Heiko Stuebner
• [U-Boot] [PATCH 5/9] rockchip: rk3288: fix FREF_MIN_HZ constant   Heiko Stuebner
• [U-Boot] [PATCH 6/9] rockchip: rk3188: Add header files for PMU and GRF   Heiko Stuebner
• [U-Boot] [PATCH 7/9] rockchip: rk3188: Add pinctrl driver   Heiko Stuebner
• [U-Boot] [PATCH 8/9] rockchip: rk3188: Bring in rk3066/rk3188 clock bindings   Heiko Stuebner
• [U-Boot] [PATCH 9/9] rockchip: rk3188: Add clock driver   Heiko Stuebner
• [U-Boot] [PATCH] rockchip: fix rk3036 Kconfig inclusion   Heiko Stuebner
• [U-Boot] [PATCH] rockchip: fix rk3036 SPL build   Heiko Stuebner
• [U-Boot] [PATCH v2 0/8] basic rockchip rk3188 support   Heiko Stuebner
• [U-Boot] [PATCH v2 1/8] rockchip: move clock drivers into a subdirectory   Heiko Stuebner
• [U-Boot] [PATCH v2 2/8] rockchip: remove log2 reimplementation from clock drivers   Heiko Stuebner
• [U-Boot] [PATCH v2 3/8] rockchip: rk3188: Add header files for PMU and GRF   Heiko Stuebner
• [U-Boot] [PATCH v2 4/8] rockchip: rk3188: Add pinctrl driver   Heiko Stuebner
• [U-Boot] [PATCH v2 5/8] rockchip: rk3188: Bring in rk3066/rk3188 clock bindings   Heiko Stuebner
• [U-Boot] [PATCH v2 6/8] rockchip: rk3188: Add clock driver   Heiko Stuebner
• [U-Boot] [PATCH v2 7/8] rockchip: rk3188: add core support   Heiko Stuebner
• [U-Boot] [PATCH v2 8/8] rockchip: rk3188: Radxa Rock board   Heiko Stuebner
• [U-Boot] [PATCH] move: rockchip: move clock drivers into a subdirectory   Heiko Stuebner
• [U-Boot] [PATCH] move: rockchip: move clock drivers into a subdirectory   Heiko Stuebner
• [U-Boot] [PATCH v3 0/5] add support for rk3399 soc and evb   Heiko Stübner
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Heiko Stübner
• [U-Boot] [PATCH 9/9] rockchip: rk3188: Add clock driver   Heiko Stübner
• [U-Boot] [PATCH 7/9] rockchip: rk3188: Add pinctrl driver   Heiko Stübner
• [U-Boot] [PATCH 2/2] ARM64: rockchip: Add initial support for RK3368 based GeekBox   Heiko Stübner
• [U-Boot] [PATCH 0/9] rockchip: cosmetics, a fix and first steps on the rk3188   Heiko Stübner
• [U-Boot] [PATCH v2 7/8] rockchip: rk3188: add core support   Heiko Stübner
• [U-Boot] [PATCH] rockchip: fix rk3036 SPL build   Heiko Stübner
• [U-Boot] [PATCH v2 0/8] basic rockchip rk3188 support   Heiko Stübner
• [U-Boot] Problem loading boot script from ext4 mmc on sunxi H3   Michal Suchanek
• [U-Boot] [PATCH 1/2] armv8: ls2080aqds: Update MAINTAINERS   York Sun
• [U-Boot] [PATCH 2/2] armv8: ls1043aqds: Update MAINTAINERS   York Sun
• [U-Boot] [PATCH] powerpc: mpc85xx: Fix compiling error for usb errata   York Sun
• [U-Boot] [Patch v2] powerpc: mpc85xx: kmp204x: Fix compiling error for usb errata   York Sun
• [U-Boot] [Patch v2 6/6] armv8: layerscape: Convert to use common MMU framework   York Sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: mmu: Fix enabling MMU   York Sun
• [U-Boot] [PATCH] board/freescale: Update MAINTAINERS files   York Sun
• [U-Boot] [PATCH] driver/ddr/fsl: Fix timing_cfg_2   York Sun
• [U-Boot] [PATCH] mpc85xx: do not include cmd_errata in SPL_BUILD   Ed Swarthout
• [U-Boot] [PATCH] armv8: Enable CPUECTLR.SMPEN for data coherency   Edward L Swarthout
• [U-Boot] NXP QorIQ LS1021A-IoT board support   Tapani
• [U-Boot] [RESEND PATCH v3 12/12] defconfig: k2g_evm_defconfig: enable SPI driver model   Jagan Teki
• [U-Boot] [RESEND PATCH v3 00/12] Convert davinci_spi to DM   Jagan Teki
• [U-Boot] [RESEND PATCH 0/4] U-Boot: Add support for Cadence QSPI on K2G   Jagan Teki
• [U-Boot] [RESEND PATCH] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz   Jagan Teki
• [U-Boot] [RESEND PATCH v4] dm: spi: Read default speed and mode values from DT   Jagan Teki
• [U-Boot] [RESEND PATCH v5 01/12] dm: core: implement dev_map_phsymem()   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/2] spi: ti_qspi: Fix failure on multiple READ_ID cmd   Jagan Teki
• [U-Boot] [PATCH 1/9] spi: zynq_qspi: Add quad support for zynq qspi   Jagan Teki
• [U-Boot] [PATCH v2 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   Jagan Teki
• [U-Boot] [PATCHv2][RESEND] spi: Add support for N25Q016A   Jagan Teki
• [U-Boot] [PATCHv3] spi: Add support for N25Q016A   Jagan Teki
• [U-Boot] Stepping down as sunxi u-boot custodian   Jagan Teki
• [U-Boot] [PATCH] README: SPI: Add & explain missed SPI & serial flash options.   Jagan Teki
• [U-Boot] [PATCH] README: SPI Support: Add & explain undocumented SPI_FLASH options.   Jagan Teki
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Jagan Teki
• [U-Boot] [PATCH v5] dm: at91: Add driver model support for the spi driver   Jagan Teki
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Jagan Teki
• [U-Boot] [PATCH v2 1/3] spi: ti_qspi: Fix failure on multiple READ_ID cmd   Jagan Teki
• [U-Boot] [PATCH v2 2/3] spi: ti_qspi: Fix compiler warning when DEBUG macro is set   Jagan Teki
• [U-Boot] [PATCH v2 3/3] spi: ti_qspi: Remove delay in read path for dra7xx   Jagan Teki
• [U-Boot] [PATCH] sf: sf_params: Add AT25DF321 flash support   Jagan Teki
• [U-Boot] [PATCH v2 1/3] spi: ti_qspi: Fix failure on multiple READ_ID cmd   Jagan Teki
• [U-Boot] [PATCH v2 2/3] spi: ti_qspi: Fix compiler warning when DEBUG macro is set   Jagan Teki
• [U-Boot] [PATCH v2 3/3] spi: ti_qspi: Remove delay in read path for dra7xx   Jagan Teki
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Jagan Teki
• [U-Boot] [PATCH] spi: xilinx_spi: Add support for Quad mode   Jagan Teki
• [U-Boot] [PATCH] spi: xilinx: Read reg base address from DTS file   Jagan Teki
• [U-Boot] [PATCH v5] dm: at91: Add driver model support for the spi driver   Jagan Teki
• [U-Boot] [PATCH v6] dm: at91: Add driver model support for the spi driver   Jagan Teki
• [U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock   Jagan Teki
• [U-Boot] [PATCH 3/4] configs: dra7xx: Update QSPI speed to 76.8MHz   Jagan Teki
• [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer   Jagan Teki
• [U-Boot] [PATCH] spi: xilinx_spi: Add support for Quad mode   Jagan Teki
• [U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   Jagan Teki
• [U-Boot] [PATCH v3 2/3] spi: zynqmp_qspi: Add QSPI driver support for ZynqMP   Jagan Teki
• [U-Boot] [PATCH v2 0/9] qspi: Add Quad and Dual mode support for Zynq QSPI   Jagan Teki
• [U-Boot] [PATCH v2 0/9] qspi: Add Quad and Dual mode support for Zynq QSPI   Jagan Teki
• [U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   Jagan Teki
• [U-Boot] Stepping down as sunxi u-boot custodian   Jagan Teki
• [U-Boot] Stepping down as sunxi u-boot custodian   Jagan Teki
• [U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model   Jagan Teki
• [U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock   Jagan Teki
• [U-Boot] [PATCH 4/4] ARM: dts: dra7xx: Update spi-max-frequency for QSPI   Jagan Teki
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC   Jagan Teki
• [U-Boot] [PATCH 4/4] sunxi: Re-enable h3 emac support   Jagan Teki
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC   Jagan Teki
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC   Jagan Teki
• [U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver   Jagan Teki
• [U-Boot] [PATCH 2/3] zynqmp: Move config IDENT_STRING to defconfig   Jagan Teki
• [U-Boot] [PATCH 1/3] Kconfig: zynqmp: Move config IDENT_STRING to Kconfig   Jagan Teki
• [U-Boot] [PATCH 3/3] zynqmp: Remove unnnecessary board config file for dc4   Jagan Teki
• [U-Boot] [PATCH 1/3] Kconfig: zynqmp: Move config IDENT_STRING to Kconfig   Jagan Teki
• [U-Boot] [PATCH 1/4] ARM: dra7xx: Change DPLL_PER_HS13 divider value   Jagan Teki
• [U-Boot] [PATCH 0/4] dra7xx: QSPI: Increase SPI bus speed.   Jagan Teki
• [U-Boot] [PATCH] configs: am43xx_evm_defconfig: Enable CONFIG_SPI_FLASH_BAR   Jagan Teki
• [U-Boot] [PATCH v2 0/2] AM57xx-IDK: Add QSPI support:wq   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver   Jagan Teki
• [U-Boot] [PATCH v2] spi: zynq_spi: Fix infinite looping while xfer   Jagan Teki
• [U-Boot] [PATCH 2/2] fs/fat/fat: Optimizes memory size with single global variable instead of 3   Benoît Thébaudeau
• [U-Boot] [PATCH 2/2] fs/fat/fat: Optimizes memory size with single global variable instead of 3   Benoît Thébaudeau
• [U-Boot] fatwrite issue in sub-directories   Benoît Thébaudeau
• [U-Boot] [PATCH 2 00/22] DM: Cmd: GPIO/LED/STM32/CLK: provide command-line support for device-tree configured gpios and leds   Benjamin Tietz
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Benjamin Tietz
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Benjamin Tietz
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Benjamin Tietz
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Benjamin Tietz
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Benjamin Tietz
• [U-Boot] [U-BOOT][PATCH v2] net:Add EMAC driver for H3/A83T/A64 SoCs.   Amit Singh Tomar
• [U-Boot] [PATCH 1/4] net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers   Amit Tomer
• [U-Boot] [U-Boot, 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board   NISHINAGA Toshifumi
• [U-Boot] [PATCH] cmd: gpt: fix the wrong size parse for the last partition   Michael Trimarchi
• [U-Boot] [PATCH] cmd: gpt: fix the wrong size parse for the last partition   Michael Trimarchi
• [U-Boot] [RFC PATCH] cmd: gpt: add - partition size parsing   Michael Trimarchi
• [U-Boot] [PATCH 0/2] Fix gpt write regression   Michael Trimarchi
• [U-Boot] [PATCH 13/15] ARM: PSCI: Add helper functions to access per-CPU target PC storage   Chen-Yu Tsai
• [U-Boot] [PATCH 13/15] ARM: PSCI: Add helper functions to access per-CPU target PC storage   Chen-Yu Tsai
• [U-Boot] [PATCH 05/15] ARM: PSCI: Add fallback value for CONFIG_ARMV7_PSCI_NR_CPUS   Chen-Yu Tsai
• [U-Boot] [PATCH 00/15] ARM: PSCI: Add secure stack and data sections   Chen-Yu Tsai
• [U-Boot] [PATCH v2 05/15] ARM: PSCI: Add missing CONFIG_ARMV7_PSCI_NR_CPUS for PSCI enabled platforms   Chen-Yu Tsai
• [U-Boot] [PATCH v2 12/15] ARM: Add secure section for initialized data   Chen-Yu Tsai
• [U-Boot] [PATCH v2 13/15] ARM: PSCI: Add helper functions to access per-CPU target PC storage   Chen-Yu Tsai
• [U-Boot] [PATCH 00/15] ARM: PSCI: Add secure stack and data sections   Chen-Yu Tsai
• [U-Boot] build error   Chen-Yu Tsai
• [U-Boot] build error   Chen-Yu Tsai
• [U-Boot] [PATCH 1/2] sunxi: gpio: Add .xlate function for gpio phandle resolution   Chen-Yu Tsai
• [U-Boot] [PATCH 2/2] sunxi: Hummingbird_A31_defconfig: Drop MACPWR option   Chen-Yu Tsai
• [U-Boot] [PATCH 1/3] sunxi: Add EMAC ethernet0 alias for H3 dtsi   Chen-Yu Tsai
• [U-Boot] [PATCH 2/3] net: sun8i_emac: Do not configure AHB2 clock   Chen-Yu Tsai
• [U-Boot] [PATCH 3/3] net: sun8i_emac: Drop redundant and incorrect setting of syscon register   Chen-Yu Tsai
• [U-Boot] Please pull u-boot-sunxi master   Chen-Yu Tsai
• [U-Boot] [PATCH 3/4] sun8i: On H3 Use word 1 instead of word 3 from the SID   Chen-Yu Tsai
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Chen-Yu Tsai
• [U-Boot] [PATCH] net: rtl8169: Fix return value for rtl_send_common   Oleksandr Tymoshenko
• [U-Boot] [PATCH] net: rtl8169: Fix return value for rtl_send_common   Oleksandr Tymoshenko
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 2/9] usb: ehci-mx6: configure power polarity in usb_power_config   Marek Vasut
• [U-Boot] [PATCH 3/9] usb: ehci-mx6: introduce config for high active power pin   Marek Vasut
• [U-Boot] dm: usb: Prevent NULL hub in usb_device_info()   Marek Vasut
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix SPL_BUILD compilation by adding CONFIG_USB_EHCI_FSL flag   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: dm: Add a usb_for_each_root_dev() helper function   Marek Vasut
• [U-Boot] [PATCH 2/2] usb: dm: Make "usb info" use usb_for_each_root_dev()   Marek Vasut
• [U-Boot] [PATCH] SPL: tiny-printf: avoid any BSS usage   Marek Vasut
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix SPL_BUILD compilation by adding CONFIG_USB_EHCI_FSL flag   Marek Vasut
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   Marek Vasut
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   Marek Vasut
• [U-Boot] [PATCH 2/9] usb: ehci-mx6: configure power polarity in usb_power_config   Marek Vasut
• [U-Boot] [PATCH 3/9] usb: ehci-mx6: introduce config for high active power pin   Marek Vasut
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   Marek Vasut
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   Marek Vasut
• [U-Boot] [PATCH] powerpc: mpc85xx: Fix compiling error for usb errata   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [U-Boot,v2] SPL: tiny-printf: avoid any BSS usage   Marek Vasut
• [U-Boot] [U-Boot,v2] SPL: tiny-printf: avoid any BSS usage   Marek Vasut
• [U-Boot] [PATCH v2] SPL: tiny-printf: avoid any BSS usage   Marek Vasut
• [U-Boot] [PATCH v4 2/4] usb: dwc2-otg: adjust fifo size via platform data   Marek Vasut
• [U-Boot] [PATCH v2 0/5] Modified the errata A006261 according to endianness   Marek Vasut
• [U-Boot] [PATCH v2 1/5] mpc85xx/powerpc:cpu_init: Modified the errata A006261 according to endianness   Marek Vasut
• [U-Boot] [PATCH v2 3/5] mpc85xx/powerpc: P2041: Apply errata A006261 for P2041   Marek Vasut
• [U-Boot] [PATCH 2/4] tools/env: javadoc for fw_printenv, fw_getenv and fw_parse_script   Marek Vasut
• [U-Boot] [PATCH] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ   Marek Vasut
• [U-Boot] [PATCH] drivers:usb:common:fsl-dt-fixup: Fix the dt for all type of usb controllers   Marek Vasut
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Marek Vasut
• [U-Boot] testing: [PATCH v7 0/3] common: usb_storage: Implement logic to calculate optimal usb maximum trasfer blocks   Marek Vasut
• [U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB   Marek Vasut
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Marek Vasut
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Marek Vasut
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Marek Vasut
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Marek Vasut
• [U-Boot] testing: [PATCH v7 0/3] common: usb_storage: Implement logic to calculate optimal usb maximum trasfer blocks   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Marek Vasut
• [U-Boot] [PATCH 4/5] novena: Remove uneeded PHYS_SDRAM_SIZE   Marek Vasut
• [U-Boot] [PATCH v2] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Marek Vasut
• [U-Boot] [PATCH v2] net: usb: r8152: Add DM support   Marek Vasut
• [U-Boot] [PATCH] serial: Enable checking UART is ready for console based on device tree   Marek Vasut
• [U-Boot] [PATCH v2] net: usb: r8152: Add DM support   Marek Vasut
• [U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB   Marek Vasut
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Marek Vasut
• [U-Boot] [PATCH 0/2] ARM: Introduce function to switch to hypervisor mode   Marek Vasut
• [U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board   Marek Vasut
• [U-Boot] [PATCH] ARM: OMAP5+: Enable errata i727   Lokesh Vutla
• [U-Boot] [PATCH] spl: fit: Fix the number of bytes read in raw mode   Lokesh Vutla
• [U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel   Alison Wang
• [U-Boot] [PATCH v5 0/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alison Wang
• [U-Boot] [PATCH v5 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alison Wang
• [U-Boot] [PATCH v5 2/2] armv8: fsl-layerscape: SMP support for loading 32-bit OS   Alison Wang
• [U-Boot] [PATCH v4 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Huan Wang
• [U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel   Huan Wang
• [U-Boot] Logging SPL output with test/py   Stephen Warren
• [U-Boot] [PATCH] test/py: support 'memstart =' in u_boot_utils.find_ram_base()   Stephen Warren
• [U-Boot] [PATCH] test/py: fix CONFIG_ tests   Stephen Warren
• [U-Boot] [PATCH] test/py: strip VT100 codes from match buffer   Stephen Warren
• [U-Boot] [PATCH 08/14] test/py: Add an option to execute a string containing a command   Stephen Warren
• [U-Boot] [PATCH 09/14] test/py: Provide a way to check that a command fails   Stephen Warren
• [U-Boot] [PATCH 08/14] test/py: Add an option to execute a string containing a command   Stephen Warren
• [U-Boot] [PATCH 13/14] test/py: Fix up after the rename of CONFIG_SYS_HUSH_PARSER   Stephen Warren
• [U-Boot] [PATCH 14/14] test: Convert the vboot test to test/py   Stephen Warren
• [U-Boot] [PATCH 14/14] test: Convert the vboot test to test/py   Stephen Warren
• [U-Boot] [PATCH 02/11] buildman: Automatically create a config file if needed   Stephen Warren
• [U-Boot] [PATCH 04/11] buildman: Allow the toolchain error to be suppressed   Stephen Warren
• [U-Boot] [PATCH 08/11] buildman: Avoid overwriting existing toolchain entries   Stephen Warren
• [U-Boot] [PATCH 09/11] buildman: Add a quick-start note   Stephen Warren
• [U-Boot] [PATCH 00/11] buildman: Make the tool friendlier for first-time users   Stephen Warren
• [U-Boot] [PATCH 4/6] efi_loader: Improve .dtb search for arm64   Stephen Warren
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Stephen Warren
• [U-Boot] [PATCH] Add a power domain framework/uclass   Stephen Warren
• [U-Boot] [PATCH] dm: clk: Remove simple version of clk_get_by_index()   Stephen Warren
• [U-Boot] [PATCH 1/2] fs/fat/fatwrite: Local variable as buffer to store dir_slot entries   Stephen Warren
• [U-Boot] Please pull u-boot-dm   Stephen Warren
• [U-Boot] [PATCH v2] dm: clk: Remove simple version of clk_get_by_index/name()   Stephen Warren
• [U-Boot] Please pull u-boot-dm   Stephen Warren
• [U-Boot] [PATCH] test/py: use absolute dts path in vboot test   Stephen Warren
• [U-Boot] [PATCH] test: Adjust the of-platdata test run condition   Stephen Warren
• [U-Boot] [PATCH 1/4] dm: clk: Add a way to find a clock by its driver   Stephen Warren
• [U-Boot] [PATCH 1/3] ARM: tegra: fix Tegra186 DT GPIO binding header   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: tegra: split p2771-0000 build   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: tegra: unify Tegra186 Makefile a bit   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add IVC protocol implementation   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: p2371-2180: A03 board PMIC config update   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: Add save_boot_params for ARMv8   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: pick up actual memory size   Stephen Warren
• [U-Boot] [PATCH 2/2] fs/fat/fat: Optimizes memory size with single global variable instead of 3   Stephen Warren
• [U-Boot] [PATCH] test/py: vboot can be run only at Sandbox   Stephen Warren
• [U-Boot] Pull request, u-boot-tegra/master   Stephen Warren
• [U-Boot] Pull request, u-boot-tegra/master   Stephen Warren
• [U-Boot] [PATCH] Add a power domain framework/uclass   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add IVC protocol implementation   Stephen Warren
• [U-Boot] Please pull: u-boot-video/master   Stephen Warren
• [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works   Stephen Warren
• [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works   Stephen Warren
• [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works   Stephen Warren
• [U-Boot] [PATCH 1/9] ARM: tegra: adapt to latest HSP DT binding   Stephen Warren
• [U-Boot] [PATCH 2/9] ARM: tegra: add BPMP DT bindings   Stephen Warren
• [U-Boot] [PATCH 3/9] ARM: tegra: add BPMP and dependencies to Tegra186 DT   Stephen Warren
• [U-Boot] [PATCH 4/9] misc: add Tegra BPMP driver   Stephen Warren
• [U-Boot] [PATCH 5/9] clock: add Tegra186 clock driver   Stephen Warren
• [U-Boot] [PATCH 6/9] reset: add Tegra186 reset driver   Stephen Warren
• [U-Boot] [PATCH 7/9] power domain: add Tegra186 driver   Stephen Warren
• [U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs   Stephen Warren
• [U-Boot] [PATCH 9/9] ARM: tegra: call tegra_board_init on Tegra186   Stephen Warren
• [U-Boot] [PATCH 1/5] pci: tegra: port to standard clock/reset/pwr domain APIs   Stephen Warren
• [U-Boot] [PATCH 2/5] ARM: tegra: add PCIe controller to Tegra186 SoC DT   Stephen Warren
• [U-Boot] [PATCH 3/5] i2c: tegra: add standardized clk/reset API support   Stephen Warren
• [U-Boot] [PATCH 4/5] ARM: tegra: add I2C controllers to Tegra186 DT   Stephen Warren
• [U-Boot] [PATCH 5/5] ARM: tegra: enable I2C buses for P2771-0000   Stephen Warren
• [U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs   Stephen Warren
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Stephen Warren
• [U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock   Stephen Warren
• [U-Boot] [PATCH 1/7] dt-bindings: allow child nodes inside the Tegra BPMP   Stephen Warren
• [U-Boot] [PATCH 2/7] misc: Tegra BPMP: support child node devices   Stephen Warren
• [U-Boot] [PATCH 3/7] dt-bindings: add Tegra186 BPMP I2C binding   Stephen Warren
• [U-Boot] [PATCH 4/7] i2c: add Tegra186 BPMP driver   Stephen Warren
• [U-Boot] [PATCH 5/7] ARM: tegra: add BPMP to Tegra186 device tree   Stephen Warren
• [U-Boot] [PATCH 6/7] ARM: tegra: enable SD card on p2771-0000   Stephen Warren
• [U-Boot] [PATCH 7/7] ARM: tegra: enable PCIe controller on p2771-0000   Stephen Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH 1/2] ARM: Add save_boot_params for ARMv8   Tom Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] loading u-boot env from flash (eMMC 1) and not eMMC0 on am335x_evm   Shmuel Weiss
• [U-Boot] [PATCH v4 3/4] rockchip: rk3288: add fastboot support   William.wu
• [U-Boot] [RFC PATCH 1/1] mtd: nand: fix bug writing 1 byte less than page size   Scott Wood
• [U-Boot] [PATCH] powerpc/86xx: Pass -mcpu=7400 to GCC   Scott Wood
• [U-Boot] [PATCH] powerpc/86xx: Increase boot map size to 256 MiB   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Increase fdt address   Scott Wood
• [U-Boot] cmd, nand: add an option to disable the verification when writing in raw mode   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Please pull u-boot-mpc85xx master   Scott Wood
• [U-Boot] [PATCH 3/4] rockchip: rk3288: add fastboot support[Involving remittance information, please pay attention to the safety of property]   Ziyuan Xu
• [U-Boot] [PATCH 2/4] usb: dwc2-otg: redefine fifo-size for rk3288   Ziyuan Xu
• [U-Boot] [PATCH 2/4] usb: dwc2-otg: redefine fifo-size for rk3288   Ziyuan Xu
• [U-Boot] [PATCH 3/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH 2/4] usb: dwc2-otg: redefine fifo-size for rk3288   Ziyuan Xu
• [U-Boot] [PATCH v2 0/3] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v2 1/3] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Ziyuan Xu
• [U-Boot] [PATCH v2 2/3] usb: dwc2-otg: re-define fifo-size for Rockchip SoCs   Ziyuan Xu
• [U-Boot] [PATCH v2 3/3] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH 0/1] rockchip: add the support for evb-rk3288 board   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: add basic support for evb-rk3288 board   Ziyuan Xu
• [U-Boot] [RESEND PATCH 0/1] rockchip: add the support for evb-rk3288 board   Ziyuan Xu
• [U-Boot] [RESEND PATCH] rockchip: add basic support for evb-rk3288 board   Ziyuan Xu
• [U-Boot] [PATCH v2 1/3] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Ziyuan Xu
• [U-Boot] [PATCH v3 0/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Ziyuan Xu
• [U-Boot] [PATCH v3 2/4] usb: dwc2-otg: re-define fifo-size for Rockchip SoCs   Ziyuan Xu
• [U-Boot] [PATCH v3 3/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Ziyuan Xu
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Ziyuan Xu
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Ziyuan Xu
• [U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys   Ziyuan Xu
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Ziyuan Xu
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Ziyuan Xu
• [U-Boot] [RESEND PATCH] rockchip: add basic support for evb-rk3288 board   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: disable CONFIG_EFI_LOADER[Involving remittance information, please pay attention to the safety of property]   Ziyuan Xu
• [U-Boot] [PATCH v2] rockchip: add basic support for evb-rk3288 board   Ziyuan Xu
• [U-Boot] [PATCH v3 0/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v3] rockchip: rk3288: Change method of loading u-boot   Ziyuan Xu
• [U-Boot] [PATCH v4] rockchip: add option to change method of loading u-boot   Ziyuan Xu
• [U-Boot] [PATCH v4] rockchip: add option to change method of loading u-boot   Ziyuan Xu
• [U-Boot] [PATCH v5] rockchip: add option to change method of loading u-boot   Ziyuan Xu
• [U-Boot] [PATCH v5] rockchip: add option to change method of loading u-boot   Ziyuan Xu
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Ziyuan Xu
• [U-Boot] [PATCH v4 0/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v4 1/4] usb: rockchip-phy: implement USB2.0 phy control   Ziyuan Xu
• [U-Boot] [PATCH v4 2/4] usb: dwc2-otg: adjust fifo size via platform data   Ziyuan Xu
• [U-Boot] [PATCH v4 3/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v4 4/4] usb: dwc2 : invalidate dcache before starting DMA   Ziyuan Xu
• [U-Boot] [PATCH v3 4/4] usb: dwc2: invalidate dcache before starting DMA   Ziyuan Xu
• [U-Boot] [PATCH v4 3/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v4.1 3/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH v4.1 3/4] rockchip: rk3288: add fastboot support   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: update fastboot usage   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: add a dummy byte for the sdram-channel property   Ziyuan Xu
• [U-Boot] [PATCH] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Ziyuan Xu
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Ziyuan Xu
• [U-Boot] [PATCH] Revert "rockchip: Move the MMC setup check earlier"   Ziyuan Xu
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Ziyuan Xu
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Ziyuan Xu
• [U-Boot] [PATCH] mmc: dw_mmc: reduce timeout detection cycle   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: add basic support for fennec-rk3288 board   Ziyuan Xu
• [U-Boot] [PATCH] mmc: fix the output format   Ziyuan Xu
• [U-Boot] [PATCH] mmc: fix the output format   Ziyuan Xu
• [U-Boot] [PATCH v2] mmc: display mmc list information like mmc_legacy type   Ziyuan Xu
• [U-Boot] [PATCH] configs: rockchip: remove CONFIG_ROCKCHIP_COMMON   Ziyuan Xu
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Ziyuan Xu
• [U-Boot] [PATCH 0/4] Ability to load linux kernel on rock2 RK3288   Ziyuan Xu
• [U-Boot] [PATCH v3] mmc: display mmc list information like mmc_legacy type   Ziyuan Xu
• [U-Boot] [PATCH v2] mmc: display mmc list information like mmc_legacy type   Ziyuan Xu
• [U-Boot] [PATCH v2] mmc: display mmc list information like mmc_legacy type   Ziyuan Xu
• [U-Boot] [PATCH] Revert "rockchip: Move the MMC setup check earlier"   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: remove the duplicated macro config   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: rk3288: revise CONFIG_FASTBOOT_BUF_ADDR   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: rk3288: move evb board to rockchip folder   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: rk3036: update MAINTAINER file   Ziyuan Xu
• [U-Boot] [PATCH] Revert "rockchip: Move the MMC setup check earlier"   Ziyuan Xu
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Ziyuan Xu
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Ziyuan Xu
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Ziyuan Xu
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Ziyuan Xu
• [U-Boot] [PATCH v2 00/10] rockchip: some code optimization and new rk3288 board support   Ziyuan Xu
• [U-Boot] [PATCH v2 01/10] rockchip: add a dummy byte for the sdram-channel property   Ziyuan Xu
• [U-Boot] [PATCH v2 02/10] cosmetic: rockchip: rk3288: pinctrl: fix config symbol naming   Ziyuan Xu
• [U-Boot] [PATCH v2 03/10] Revert "rockchip: Move the MMC setup check earlier"   Ziyuan Xu
• [U-Boot] [PATCH v2 04/10] rockchip: rk3288: disable fastboot in SPL stage   Ziyuan Xu
• [U-Boot] [PATCH v2 05/10] rockchip: remove the duplicated macro config   Ziyuan Xu
• [U-Boot] [PATCH v2 06/10] rockchip: rk3288: revise CONFIG_FASTBOOT_BUF_ADDR   Ziyuan Xu
• [U-Boot] [PATCH v2 07/10] rockchip: rk3288: move evb board to rockchip folder   Ziyuan Xu
• [U-Boot] [PATCH v2 08/10] rockchip: rk3036: update MAINTAINER file   Ziyuan Xu
• [U-Boot] [PATCH v2 09/10] rockchip: add basic support for fennec-rk3288 board   Ziyuan Xu
• [U-Boot] [PATCH v2 10/10] rockchip: add support for rk3288 PopMetal board   Ziyuan Xu
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Ziyuan Xu
• [U-Boot] [issue report] mainline u-boot was stuck before booting kernel   Ziyuan Xu
• [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards   Ziyuan Xu
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: transfer proper bytes to FIFO   Ziyuan Xu
• [U-Boot] [PATCH 2/2] mmc: dw_mmc: fix data starvation by host timeout under FIFO mode   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: add fastboot support for rk3036 board   Ziyuan Xu
• [U-Boot] [PATCH] rockchip: add support for rk3288 miniarm board   Ziyuan Xu
• [U-Boot] [PATCH] mmc: dw_mmc: fix the wrong Mask bit boundary for fifo_count bit   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A   Ziyuan Xu
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] pull request: u-boot-uniphier/master (2nd round)   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: renumber serial aliases for Gentil/Vodka boards   Masahiro Yamada
• [U-Boot] [PATCH] mmc: sdhci: clean up time out detection   Masahiro Yamada
• [U-Boot] [PATCH v2] mmc: sdhci: clean up timeout detection   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: select CONFIG_ARMV8_SPIN_TABLE   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: fix doubled tftpboot commands   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: use devm_ioremap() for drivers   Masahiro Yamada
• [U-Boot] [PATCH v2] ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()   Masahiro Yamada
• [U-Boot] [Urgent Problem] ARM64 Linux fails to boot with initramdisk with uImage header   Masahiro Yamada
• [U-Boot] [Urgent Problem] ARM64 Linux fails to boot with initramdisk with uImage header   Masahiro Yamada
• [U-Boot] [PATCH] image: fix IH_ARCH_... values for uImage compatibility   Masahiro Yamada
• [U-Boot] [Urgent Problem] ARM64 Linux fails to boot with initramdisk with uImage header   Masahiro Yamada
• [U-Boot] [PATCH v2] image: fix IH_ARCH_... values for uImage compatibility   Masahiro Yamada
• [U-Boot] [PATCH 0/4] ARM: uniphier updates for v2016.09-rc1   Masahiro Yamada
• [U-Boot] [PATCH 1/4] ARM: uniphier: clear notification flag before L2 operation   Masahiro Yamada
• [U-Boot] [PATCH 2/4] ARM: uniphier: rename outer-cache register macros   Masahiro Yamada
• [U-Boot] [PATCH 3/4] ARM: uniphier: introduce flags to uniphier_board_data structure   Masahiro Yamada
• [U-Boot] [PATCH 4/4] ARM: uniphier: add PH1-LD21 board data   Masahiro Yamada
• [U-Boot] [PATCH] usb: dwc3: fixes crash in dwc3 driver due to types size mismatch   Masahiro Yamada
• [U-Boot] [PATCH 0/2] tools: moveconfig: minor updates related to header cleanup   Masahiro Yamada
• [U-Boot] [PATCH 1/2] tools: moveconfig: do not cleanup headers in include/generated   Masahiro Yamada
• [U-Boot] [PATCH 2/2] tools: moveconfig: do not check clean tree and compilers for -H option   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: add clock/reset settings for xHCI of ProXstream2   Masahiro Yamada
• [U-Boot] [PATCH] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: renumber serial aliases for Gentil/Vodka boards   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: fix doubled tftpboot commands   Masahiro Yamada
• [U-Boot] [PATCH 0/4] ARM: uniphier updates for v2016.09-rc1   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: add clock/reset settings for xHCI of ProXstream2   Masahiro Yamada
• [U-Boot] [PATCH v2] ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()   Masahiro Yamada
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH] tree-wide: move CONFIG_PHYS_64BIT to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/4] tools: moveconfig: improve header cleanup feature   Masahiro Yamada
• [U-Boot] [PATCH 1/4] tools: moveconfig: trim garbage lines after header cleanups   Masahiro Yamada
• [U-Boot] [PATCH 2/4] tools: moveconfig: show result of header cleaning in unified diff   Masahiro Yamada
• [U-Boot] [PATCH 3/4] tools: moveconfig: show result of header cleaning in color mode   Masahiro Yamada
• [U-Boot] [PATCH 4/4] tools: moveconfig: fix cleanup of defines across multiple lines   Masahiro Yamada
• [U-Boot] [PATCH v2] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Masahiro Yamada
• [U-Boot] [PATCH] ARM: socfpga: use the default CONFIG_BOOTDELAY=2   Masahiro Yamada
• [U-Boot] [PATCH v2 0/8] tools: moveconfig: a collection of improvement of garbage cleaning   Masahiro Yamada
• [U-Boot] [PATCH v2 1/8] tools: moveconfig: do not cleanup headers in include/generated   Masahiro Yamada
• [U-Boot] [PATCH v2 2/8] tools: moveconfig: do not check clean tree and compilers for -H option   Masahiro Yamada
• [U-Boot] [PATCH v2 3/8] tools: moveconfig: trim garbage lines after header cleanups   Masahiro Yamada
• [U-Boot] [PATCH v2 4/8] tools: moveconfig: show result of header cleaning in unified diff   Masahiro Yamada
• [U-Boot] [PATCH v2 5/8] tools: moveconfig: show diffs of cleaned headers in color   Masahiro Yamada
• [U-Boot] [PATCH v2 6/8] tools: moveconfig: fix cleanup of defines across multiple lines   Masahiro Yamada
• [U-Boot] [PATCH v2 7/8] tools: moveconfig: make getting all defconfigs into helper function   Masahiro Yamada
• [U-Boot] [PATCH v2 8/8] tools: moveconfig: support CONFIG_SYS_EXTRA_OPTIONS cleaning   Masahiro Yamada
• [U-Boot] [PATCH 1/4] tools: moveconfig: trim garbage lines after header cleanups   Masahiro Yamada
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] tree-wide: move CONFIG_PHYS_64BIT to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/3] Some Kconfig move/fixups   Masahiro Yamada
• [U-Boot] [PATCH 1/3] cmd: bootz: make CMD_BOOTZ depend on CMD_BOOTM   Masahiro Yamada
• [U-Boot] [PATCH 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 3/3] arm64: thunderx_88xx_defconfig: remove unneeded CONFIG_SYS_EXTRA_OPTIONS   Masahiro Yamada
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Masahiro Yamada
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 1/3] cmd: bootz: make CMD_BOOTZ depend on CMD_BOOTM   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: move CONFIG_I2C_EEPROM to defconfig   Masahiro Yamada
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Masahiro Yamada
• [U-Boot] [PATCH 2/2] uniphier: Drop CONFIG_I2C_EEPROM   Masahiro Yamada
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/3] usb: arrange Kconfig entries for USB host support   Masahiro Yamada
• [U-Boot] [PATCH 1/3] usb: add CONIFG_USB_OHCI_HCD in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 2/3] usb: add CONFIG_USB_UHCI_HCD in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 3/3] usb: add (move) CONFIG_USB_HOST to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 1/3] usb: add CONIFG_USB_OHCI_HCD in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 0/3] usb: arrange Kconfig entries for USB host support   Masahiro Yamada
• [U-Boot] [PATCH v2 1/3] usb: add CONFIG_USB_OHCI_HCD in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] usb: add CONFIG_USB_UHCI_HCD in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] usb: add (move) CONFIG_USB_HOST to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/3] Some Kconfig move/fixups   Masahiro Yamada
• [U-Boot] [PATCH 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Kever Yang
• [U-Boot] [RESEND PATCH] rockchip: add basic support for evb-rk3288 board   Kever Yang
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Kever Yang
• [U-Boot] [PATCH] board: move all the rockchip board in one folder   Kever Yang
• [U-Boot] [RESEND PATCH] board: move all the rockchip board in one folder   Kever Yang
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Kever Yang
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Kever Yang
• [U-Boot] How to support ATF on u-boot   Kever Yang
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Kever Yang
• [U-Boot] [PATCH 0/5]   Kever Yang
• [U-Boot] [PATCH 1/5] dts: add support for rkchichip rk3399 soc   Kever Yang
• [U-Boot] [PATCH 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Kever Yang
• [U-Boot] [PATCH 3/5] config: add config file for evb-rk3399   Kever Yang
• [U-Boot] [PATCH 4/5] mmc: rockchip: add SDHCI driver support for rockchip soc   Kever Yang
• [U-Boot] How to support ATF on u-boot   Kever Yang
• [U-Boot] [PATCH] mkimage: rockchip: add suport for rk33 serial   Kever Yang
• [U-Boot] [PATCH v2 0/5] add support for rk3399 soc and evb   Kever Yang
• [U-Boot] [PATCH v2 1/5] dts: add support for rkchichip rk3399 soc   Kever Yang
• [U-Boot] [PATCH v2 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Kever Yang
• [U-Boot] [PATCH v2 3/5] config: add config file for evb-rk3399   Kever Yang
• [U-Boot] [PATCH v2 4/5] mmc: rockchip: add SDHCI driver support for rockchip soc   Kever Yang
• [U-Boot] [PATCH v3 0/5] add support for rk3399 soc and evb   Kever Yang
• [U-Boot] [PATCH v3 1/5] dts: add support for rkchichip rk3399 soc   Kever Yang
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Kever Yang
• [U-Boot] [PATCH v3 3/5] config: add config file for evb-rk3399   Kever Yang
• [U-Boot] [PATCH v3 4/5] mmc: rockchip: add SDHCI driver support for rockchip soc   Kever Yang
• [U-Boot] [PATCH v2] mkimage: rockchip: add suport for rk33 serial   Kever Yang
• [U-Boot] [PATCH 4/5] mmc: rockchip: add SDHCI driver support for rockchip soc   Kever Yang
• [U-Boot] [PATCH v3 0/5] add support for rk3399 soc and evb   Kever Yang
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Kever Yang
• [U-Boot] [PATCH v4 0/4] add support for rk3399 soc and evb   Kever Yang
• [U-Boot] [PATCH v4 1/4] dts: add support for Rockchip rk3399 soc   Kever Yang
• [U-Boot] [PATCH v4 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Kever Yang
• [U-Boot] [PATCH v4 3/4] config: add config file for evb-rk3399   Kever Yang
• [U-Boot] [PATCH v4 4/4] ARM64: evb-rk3399: add a README for this board setup   Kever Yang
• [U-Boot] [PATCH] mmc: rockchip: add SDHCI driver support for rockchip soc   Kever Yang
• [U-Boot] [PATCH] mmc-uclass: correct the device number   Kever Yang
• [U-Boot] [PATCH] mmc-uclass: correct the device number   Kever Yang
• [U-Boot] [PATCH v2] mmc-uclass: correct the device number   Kever Yang
• [U-Boot] [PATCH v5 0/4] add support for rk3399 soc and evb   Kever Yang
• [U-Boot] [PATCH v5 1/4] dts: add support for Rockchip rk3399 soc   Kever Yang
• [U-Boot] [PATCH v5 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Kever Yang
• [U-Boot] [PATCH v5 3/4] config: add config file for evb-rk3399   Kever Yang
• [U-Boot] [PATCH v5 4/4] ARM64: evb-rk3399: add a README for this board setup   Kever Yang
• [U-Boot] [PATCH v3 2/5] ARM64: rockchip: add support for rk3399 SoC based evb-board   Kever Yang
• [U-Boot] [PATCH v4 2/4] ARM64: rockchip: add support for rk3399 SoC based evb   Kever Yang
• [U-Boot] [PATCH v3] mmc-uclass: correct the device number   Kever Yang
• [U-Boot] [PATCH] configs: rockchip: remove CONFIG_ROCKCHIP_COMMON   Kever Yang
• [U-Boot] [PATCH] rockchip: fix rk3036 SPL build   Kever Yang
• [U-Boot] [PATCH v4] mmc-uclass: correct the device number   Kever Yang
• [U-Boot] [PATCH] rk3399: reseve space for trust   Kever Yang
• [U-Boot] [PATCH v2] configs: rockchip: remove no use MACRO   Kever Yang
• [U-Boot] [PATCH] rk3399: reseve space for trust   Kever Yang
• [U-Boot] [PATCH v2] rk3399: Reserve space for ARM Trust Firmware   Kever Yang
• [U-Boot] [PATCH 0/2] rk3399: add soc basic driver support   Kever Yang
• [U-Boot] [PATCH 1/2] rk3399: add basic soc driver   Kever Yang
• [U-Boot] [PATCH 2/2] mmc: rockchip: add clock init   Kever Yang
• [U-Boot] [PATCH 1/2] rk3399: add basic soc driver   Kever Yang
• [U-Boot] [PATCH 2/2] mmc: rockchip: add clock init   Kever Yang
• [U-Boot] [PATCH v2] rockchip: rk3288: Fix pinctrl for GPIO bank 0   Kever Yang
• [U-Boot] [PATCH] cmd: gpt: fix the wrong size parse for the last partition   Kever Yang
• [U-Boot] [PATCH] cmd: gpt: fix the wrong size parse for the last partition   Kever Yang
• [U-Boot] [PATCH] cmd: gpt: fix the wrong size parse for the last partition   Kever Yang
• [U-Boot] [PATCH v2 0/2] rk3399: add soc basic driver support   Kever Yang
• [U-Boot] [PATCH v2 1/2] rk3399: add basic soc driver   Kever Yang
• [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288   Kever Yang
• [U-Boot] [PATCH v2] cmd: gpt: fix the wrong size parse for the last partition   Kever Yang
• [U-Boot] [PATCH v2 2/2] mmc: rockchip: add clock init   Kever Yang
• [U-Boot] [PATCH] sf: sf_params: Add AT25DF321 flash support   Wenyou Yang
• [U-Boot] [PATCH v7 0/4] ARM: AT91: Add AT91 PIO4 pinctrl driver and gpio driver with DM   Wenyou Yang
• [U-Boot] [PATCH v7 1/4] gpio: atmel_pio4: Move PIO4 definitions to head file   Wenyou Yang
• [U-Boot] [PATCH v7 2/4] gpio: atmel_pio4: Rework to support DM & DT   Wenyou Yang
• [U-Boot] [PATCH v7 3/4] pinctrl: at91-pio4: Add pinctrl driver   Wenyou Yang
• [U-Boot] [PATCH v7 4/4] atmel: Bring in at91 pio4 device tree file and bindings   Wenyou Yang
• [U-Boot] [PATCH v5] dm: at91: Add driver model support for the spi driver   Wenyou Yang
• [U-Boot] [PATCH v5] clk: at91: Add clock driver   Wenyou Yang
• [U-Boot] [PATCH v3] dm: atmel: Add driver model support for the ehci driver   Wenyou Yang
• [U-Boot] [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support   Wenyou Yang
• [U-Boot] [PATCH] ARM: at91/dt: Add device tree for SAMA5D2 Xplained   Wenyou Yang
• [U-Boot] [PATCH v8] mmc: atmel_sdhci: Convert to the driver model support   Wenyou Yang
• [U-Boot] [PATCH v6] dm: at91: Add driver model support for the spi driver   Wenyou Yang
• [U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver   Wenyou Yang
• [U-Boot] [PATCH v9] mmc: atmel_sdhci: Convert to the driver model support   Wenyou Yang
• [U-Boot] [PATCH] armv8: ls2080a/ls1043a/ls1012a: enable support for booti   Stuart Yoder
• [U-Boot] [PATCH 00/15] ARM: PSCI: Add secure stack and data sections   Hongbo Zhang
• [U-Boot] [PATCH 13/15] ARM: PSCI: Add helper functions to access per-CPU target PC storage   Hongbo Zhang
• [U-Boot] [PATCH 01/15] ARM: PSCI: Split out common stack setup code from psci_arch_init   Hongbo Zhang
• [U-Boot] [PATCH 05/15] ARM: PSCI: Add fallback value for CONFIG_ARMV7_PSCI_NR_CPUS   Hongbo Zhang
• [U-Boot] [PATCH 07/15] ARM: PSCI: Allocate PSCI stack in secure stack section   Hongbo Zhang
• [U-Boot] [PATCH 13/15] ARM: PSCI: Add helper functions to access per-CPU target PC storage   Hongbo Zhang
• [U-Boot] [PATCH 14/15] ARM: PSCI: Switch to per-CPU target PC storage in secure data section   Hongbo Zhang
• [U-Boot] [PATCH 00/15] ARM: PSCI: Add secure stack and data sections   Hongbo Zhang
• [U-Boot] [PATCH v5 0/8] ARMv7: PSCI: add PSCI v1.0 support   Hongbo Zhang
• [U-Boot] [PATCH 05/15] ARM: PSCI: Add fallback value for CONFIG_ARMV7_PSCI_NR_CPUS   Hongbo Zhang
• [U-Boot] [PATCH v5 0/8] ARMv7: PSCI: add PSCI v1.0 support   Hongbo Zhang
• [U-Boot] [PATCH v5 0/8] ARMv7: PSCI: add PSCI v1.0 support   Hongbo Zhang
• [U-Boot] [PATCH v6 1/4] ARMv7: PSCI: add PSCI v1.0 functions skeleton   Hongbo Zhang
• [U-Boot] [PATCH v6 1/4] ARMv7: PSCI: add PSCI v1.0 functions skeleton   Hongbo Zhang
• [U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"   Qiang Zhao
• [U-Boot] [PATCH] serial_mxc: Remove unconditional DCE setting   stefano babic
• [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"   stefano babic
• [U-Boot] fatwrite issue in sub-directories   Nicolas le bayon
• [U-Boot] fatwrite issue in sub-directories   Nicolas le bayon
• [U-Boot] Brotli Compression to Fit Image/bzImage   vinoth eswaran
• [U-Boot] Brotli Compression to Fit Image/bzImage   vinoth eswaran
• [U-Boot] MinnowBoard Turbot U-boot is in 64-bit mode or 32-bit mode   vinoth eswaran
• [U-Boot] [PATCH v6 0/4] ARMv7: PSCI: add PSCI v1.0 support   macro.wave.z at gmail.com
• [U-Boot] [PATCH v6 1/4] ARMv7: PSCI: add PSCI v1.0 functions skeleton   macro.wave.z at gmail.com
• [U-Boot] [PATCH v6 2/4] ARMv7: PSCI: ls102xa: check target CPU ID before further operations   macro.wave.z at gmail.com
• [U-Boot] [PATCH v6 3/4] ARMv7: PSCI: ls102xa: add more PSCI v1.0 functions implemention   macro.wave.z at gmail.com
• [U-Boot] [PATCH v6 4/4] ARMv7: PSCI: ls102xa: move secure text section into OCRAM   macro.wave.z at gmail.com
• [U-Boot] [PATCH 0/3] stm32: Add SDRAM support for stm32f746 discovery board   tnishinaga.dev at gmail.com
• [U-Boot] [PATCH 1/3] stm32: clk: Add 200MHz clock configuration for stm32f746 discovery board   tnishinaga.dev at gmail.com
• [U-Boot] [PATCH 2/3] stm32: Add SDRAM support for stm32f746 discovery board   tnishinaga.dev at gmail.com
• [U-Boot] [PATCH 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board   tnishinaga.dev at gmail.com
• [U-Boot] [PATCH] git-mailrc: add rockchip alias   jk
• [U-Boot] [bug report]cmd: cache: output information   jk
• [U-Boot] [bug report]cmd: cache: output information   jk
• [U-Boot] Disable command at runtime   kubiznak.petr
• [U-Boot] Netconsole hangs   kubiznak.petr
• [U-Boot] [PATCH v5] dm: at91: Add driver model support for the spi driver   Wenyou.Yang at microchip.com
• [U-Boot] [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support   Wenyou.Yang at microchip.com
• [U-Boot] [PATCH v6] dm: at91: Add driver model support for the spi driver   Wenyou.Yang at microchip.com
• [U-Boot] OCOTEA Board   pc.ramachandra
• [U-Boot] OCOTEA Board Serial Port(NS16550)   pc.ramachandra
• [U-Boot] Powerpc(U-Boot/board/amcc/ocotea/flash.c) file couldn't under stand   pc.ramachandra
• [U-Boot] In U-Boot 2014.04, DTS File is required or not for OCOTEA PowerPC   pc.ramachandra
• [U-Boot] [PATCH v2 0/4] ARM: imx: enhance support for the cm-fx6 module   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH v2 1/4] ARM: configs: cm_fx6: improve default environment   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH v2 2/4] fdt_support: define stub for fdt_fixup_mtdparts   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH v2 3/4] ARM: board: cm_fx6: fixup mtd partitions in the fdt   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH v2 4/4] ARM: configs: cm_fx6: add mtd support   christopher.spinrath at rwth-aachen.de
• [U-Boot] Dynamic linker in uboot   atulkumar singh
• [U-Boot] [PATCH] ARMv8/ls1046a: Cleanup the environment variables   Wenbin song
• [U-Boot] [patch v2] armv8/ls1043a: Add MTD partition scheme   Wenbin song
• [U-Boot] [PATCH v2 0/9] mx7: add Colibri iMX7S/iMX7D support   stefano
• [U-Boot] [PATCH] mpc85xx: do not include cmd_errata in SPL_BUILD   york sun
• [U-Boot] [PATCH] mpc85xx: do not include cmd_errata in SPL_BUILD   york sun
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   york sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix SPL_BUILD compilation by adding CONFIG_USB_EHCI_FSL flag   york sun
• [U-Boot] [PATCH v4 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   york sun
• [U-Boot] [PATCH] driver: fsl_qspi: disable AHB buffer prefetch   york sun
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   york sun
• [U-Boot] [PATCH] powerpc: mpc85xx: Do not build errata command in SPL   york sun
• [U-Boot] [PATCH] driver: fsl_qspi: disable AHB buffer prefetch   york sun
• [U-Boot] [PATCH v2] include: usb: Rename USB controller base address mapping   york sun
• [U-Boot] [PATCH v2] driver: fsl_qspi: disable AHB buffer prefetch   york sun
• [U-Boot] [PATCH] driver: spi: fsl-qspi: remove compile Warnings   york sun
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   york sun
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   york sun
• [U-Boot] Please investigate T2080QDS U-Boot   york sun
• [U-Boot] Please investigate T2080QDS U-Boot   york sun
• [U-Boot] [PATCH v4 2/9] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3   york sun
• [U-Boot] [PATCH v2 1/5] mpc85xx/powerpc:cpu_init: Modified the errata A006261 according to endianness   york sun
• [U-Boot] [PATCH v2 2/5] mpc85xx/powerpc:P1010: Apply errata A006261 for P1010   york sun
• [U-Boot] [PATCH v2 3/5] mpc85xx/powerpc: P2041: Apply errata A006261 for P2041   york sun
• [U-Boot] [PATCH v2 4/5] mpc85xx/powerpc: P5040: Apply errata A006261 for P5040   york sun
• [U-Boot] [PATCH v2 5/5] mpc85xx/powerpc: Do not apply errata A006261 for T4160, T1040, T2080   york sun
• [U-Boot] [PATCH v2 0/5] Modified the errata A006261 according to endianness   york sun
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   york sun
• [U-Boot] [PATCH 5/5] fsl-layerscape: Add workaround for PCIe erratum A010315   york sun
• [U-Boot] [PATCH v1 6/6] armv8: layerscape: Convert to use common MMU framework   york sun
• [U-Boot] [PATCH v1 0/6] Convert FSL LayerScape ARMv8 SoCs to use common MMU code   york sun
• [U-Boot] [PATCHv7 1/6] armv8: fsl-layerscape: add i/d-cache enable function to enable_caches   york sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   york sun
• [U-Boot] [PATCH v5 0/8] ARMv7: PSCI: add PSCI v1.0 support   york sun
• [U-Boot] [PATCH 2/4] SECURE_BOOT: Enable chain of trust in SPL framework   york sun
• [U-Boot] [PATCH] powerpc: p1_p2_rdb_pc: rename to P2020RDB_PC   york sun
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   york sun
• [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme   york sun
• [U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"   york sun
• [U-Boot] [PATCH 1/2] mpc83xx: fix the corruption of u-boot when saveenv   york sun
• [U-Boot] [PATCH v3] driver: spi: fsl-qspi: disable AHB buffer prefetch   york sun
• [U-Boot] [PATCH v4 2/9] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3   york sun
• [U-Boot] [PATCH v4 8/9] efi_loader: Declare secure memory as reserved   york sun
• [U-Boot] [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol   york sun
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   york sun
• [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme   york sun
• [U-Boot] Please pull u-boot-mpc85xx master   york sun
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   york sun
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   york sun
• [U-Boot] Please pull u-boot-mpc85xx master   york sun
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   york sun
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   york sun
• [U-Boot] [PATCH v2] treewide: move CONFIG_PHYS_64BIT to Kconfig   york sun
• [U-Boot] i2c: fsl: Fix driver initialization   york sun
• [U-Boot] [PATCH v2] include: usb: Rename USB controller base address mapping   york sun
• [U-Boot] [PATCH 1/4] DM: crypto/fsl: Enable rsa DM driver usage before relocation   york sun
• [U-Boot] [PATCH 2/4] SECURE_BOOT: Enable chain of trust in SPL framework   york sun
• [U-Boot] [PATCH 3/4] SECURE_BOOT: Enable SD as a source for bootscript   york sun
• [U-Boot] [PATCH 4/4] arm: ls1021atwr: Add SD secure boot target   york sun
• [U-Boot] [PATCH 1/2] armv8: ls2080aqds: Update MAINTAINERS   york sun
• [U-Boot] [PATCH 2/2] armv8: ls1043aqds: Update MAINTAINERS   york sun
• [U-Boot] [Patch v3 1/5] armv8: fsl-layerscape: Add A72 core detection   york sun
• [U-Boot] [Patch v3 2/5] armv8: fsl-layerscape: Consolidate the LSCH2 common defines   york sun
• [U-Boot] [Patch v3 3/5] armv8: fsl_lsch2: Add SerDes 2 support   york sun
• [U-Boot] [Patch v3 4/5] armv8: fsl_lsch2: Add LS1046A SoC support   york sun
• [U-Boot] [Patch v3 5/5] drivers: net/fm: Add Fman support for LS1046A   york sun
• [U-Boot] [PATCH v6 1/4] ARMv7: PSCI: add PSCI v1.0 functions skeleton   york sun
• [U-Boot] [PATCH v6 2/4] ARMv7: PSCI: ls102xa: check target CPU ID before further operations   york sun
• [U-Boot] [PATCH v6 3/4] ARMv7: PSCI: ls102xa: add more PSCI v1.0 functions implemention   york sun
• [U-Boot] [PATCH v6 4/4] ARMv7: PSCI: ls102xa: move secure text section into OCRAM   york sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: mmu: Fix enabling MMU   york sun
• [U-Boot] [PATCH] ARMv8/ls1046a: Cleanup the environment variables   york sun
• [U-Boot] [patch v2] armv8/ls1043a: Add MTD partition scheme   york sun
• [U-Boot] [Patch v3] armv8: ls1043aqds: add IFC fixup in case QSPI is enabled   york sun
• [U-Boot] [PATCH] powerpc/86xx: Pass -mcpu=7400 to GCC   york sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   york sun
• [U-Boot] Please pull u-boot-mpc86xx master   york sun
• [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum A009620   york sun
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   york sun
• [U-Boot] [PATCH] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   york sun
• [U-Boot] [PATCH 1/2] board: ls1043ardb: move sec_init to board_init   york sun
• [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings   york sun
• [U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model   york sun
• [U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB   york sun
• [U-Boot] [PATCH 2/2] config.h: clean unused CONFIG_ENV_SPI_* if using driver model   york sun
• [U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB   york sun
• [U-Boot] NXP QorIQ LS1021A-IoT board support   york sun
• [U-Boot] NXP QorIQ LS1021A-IoT board support   york sun
• [U-Boot] [PATCH] armv8: mmu: Detect page table overflow in emergency pt creation   york sun
• [U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue   york sun
• [U-Boot] timing_cfg_2 register in FSL DDR driver   york sun
• [U-Boot] [Resend PATCH] board/freescale: Update MAINTAINERS files   york sun
• [U-Boot] NXP QorIQ LS1021A-IoT board support   york sun
• [U-Boot] [Resend again PATCH] board/freescale: Update MAINTAINERS files   york sun
• [U-Boot] NXP QorIQ LS1021A-IoT board support   york sun
• [U-Boot] U-Boot mkimage does not support option -K,-k   leo tao
• [U-Boot] EL3 to EL1 for u-boot-2016.05   wilson002