[U-Boot] [PATCH v2 08/13] dm: mmc: zynq: Convert zynq to use driver model for MMC

Jaehoon Chung jh80.chung at samsung.com
Wed Jul 6 08:53:37 CEST 2016


Hi Simon,

On 07/06/2016 08:10 AM, Simon Glass wrote:
> Move zynq to the latest driver model support by enabling CONFIG_DM_MMC,
> CONFIG_DM_MMC_OPS and CONFIG_BLK.
> 
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
> 
> Changes in v2: None
> 
>  arch/arm/Kconfig         |  5 +++++
>  drivers/mmc/zynq_sdhci.c | 39 ++++++++++++++++++++++++++++++++++-----
>  2 files changed, 39 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 9d6cdc7..f45fd37 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -657,11 +657,13 @@ config ARCH_ZYNQ
>  	select DM_GPIO
>  	select SPL_DM if SPL
>  	select DM_MMC
> +	select DM_MMC_OPS
>  	select DM_SPI
>  	select DM_SERIAL
>  	select DM_SPI_FLASH
>  	select SPL_SEPARATE_BSS if SPL
>  	select DM_USB if USB
> +	select BLK

If my understanding is right, your patch[12~13/13] are enabled with CONFIG_DM_MMC.
Does it need to select at here?

>  
>  config ARCH_ZYNQMP
>  	bool "Support Xilinx ZynqMP Platform"
> @@ -671,6 +673,9 @@ config ARCH_ZYNQMP
>  	select DM_SERIAL
>  	select SUPPORT_SPL
>  	select DM_USB if USB
> +	select DM_MMC
> +	select DM_MMC_OPS
> +	select BLK

Ditto.

>  
>  config TEGRA
>  	bool "NVIDIA Tegra"
> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
> index d405929..bcd154a 100644
> --- a/drivers/mmc/zynq_sdhci.c
> +++ b/drivers/mmc/zynq_sdhci.c
> @@ -17,10 +17,18 @@
>  # define CONFIG_ZYNQ_SDHCI_MIN_FREQ	0
>  #endif
>  
> +struct arasan_sdhci_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
> +};

Almost all drivers are using the similar *_plat structure.
Then it can be used the one structure instead of *_plat..
So i think it should be located "struct mmc_plat" into mmc.h

struct mmc_plat {
	struct mmc_config cfg;
	struct mmc mmc;
};

Then we can remove the all other similar plat structures.
if you are ok, I will clean everything.
how about?

Best Regards,
Jaehoon Chung

> +
>  static int arasan_sdhci_probe(struct udevice *dev)
>  {
> +	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
>  	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
>  	struct sdhci_host *host = dev_get_priv(dev);
> +	u32 caps;
> +	int ret;
>  
>  	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
>  		       SDHCI_QUIRK_BROKEN_R1B;
> @@ -31,13 +39,19 @@ static int arasan_sdhci_probe(struct udevice *dev)
>  
>  	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
>  
> -	add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
> -		  CONFIG_ZYNQ_SDHCI_MIN_FREQ);
> -
> -	upriv->mmc = host->mmc;
> +	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> +	ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
> +			      caps, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
> +			      CONFIG_ZYNQ_SDHCI_MIN_FREQ, host->version,
> +			      host->quirks, 0);
> +	host->mmc = &plat->mmc;
> +	if (ret)
> +		return ret;
> +	host->mmc->priv = host;
>  	host->mmc->dev = dev;
> +	upriv->mmc = host->mmc;
>  
> -	return 0;
> +	return sdhci_probe(dev);
>  }
>  
>  static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
> @@ -50,6 +64,18 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
>  	return 0;
>  }
>  
> +static int arasan_sdhci_bind(struct udevice *dev)
> +{
> +	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
> +	int ret;
> +
> +	ret = sdhci_bind(dev, &plat->mmc, &plat->cfg);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
>  static const struct udevice_id arasan_sdhci_ids[] = {
>  	{ .compatible = "arasan,sdhci-8.9a" },
>  	{ }
> @@ -60,6 +86,9 @@ U_BOOT_DRIVER(arasan_sdhci_drv) = {
>  	.id		= UCLASS_MMC,
>  	.of_match	= arasan_sdhci_ids,
>  	.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
> +	.ops		= &sdhci_ops,
> +	.bind		= arasan_sdhci_bind,
>  	.probe		= arasan_sdhci_probe,
>  	.priv_auto_alloc_size = sizeof(struct sdhci_host),
> +	.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
>  };
> 



More information about the U-Boot mailing list