[U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"

stefano babic sbabic at denx.de
Thu Jul 21 10:48:21 CEST 2016


Hi Breno,

Am 20.07.2016 um 22:20 schrieb Fabio Estevam:
> On Wed, Jul 20, 2016 at 4:55 PM, Breno Lima <breno.lima at nxp.com> wrote:
>> Commit c1ebf54868359005 ("imx_common: Return MMCSD_MODE_FS in spl_boot_mode()
>> also for EXTFS") causes SPL breakage on wandboard:
>>
>> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
>> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
>> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
>> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
>> ** First descriptor is NOT a primary desc on 0:1 **
>> spl: no partition table found
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> This error is seen when SPL and u-boot.img are stored in the raw SD card
>> partition.
>>
>> This reverts commit c1ebf54868359005c32944c1473668d5fcaca158.
>>
>> Signed-off-by: Breno Lima <breno.lima at nxp.com>
> Thanks for the fix:
>
> Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic



More information about the U-Boot mailing list