[U-Boot] [PATCH 2/4] spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock
Vignesh R
vigneshr at ti.com
Mon Jul 25 12:15:45 CEST 2016
According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, update
the driver to use the same.
Signed-off-by: Vignesh R <vigneshr at ti.com>
---
drivers/spi/ti_qspi.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index fa7ee229878a..bb72cb03ec24 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -21,7 +21,8 @@ DECLARE_GLOBAL_DATA_PTR;
/* ti qpsi register bit masks */
#define QSPI_TIMEOUT 2000000
-#define QSPI_FCLK 192000000
+#define QSPI_FCLK 192000000
+#define QSPI_DRA7XX_FCLK 76800000
/* clock control */
#define QSPI_CLK_EN BIT(31)
#define QSPI_CLK_DIV_MAX 0xffff
@@ -101,6 +102,7 @@ struct ti_qspi_priv {
#endif
struct ti_qspi_regs *base;
void *ctrl_mod_mmap;
+ ulong fclk;
unsigned int mode;
u32 cmd;
u32 dc;
@@ -113,7 +115,7 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
if (!hz)
clk_div = 0;
else
- clk_div = (QSPI_FCLK / hz) - 1;
+ clk_div = (priv->fclk / hz) - 1;
debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
@@ -366,8 +368,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
+ priv->fclk = QSPI_DRA7XX_FCLK;
#else
priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
+ priv->fclk = QSPI_FCLK;
#endif
ti_spi_set_speed(priv, max_hz);
@@ -520,7 +524,10 @@ static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
static int ti_qspi_probe(struct udevice *bus)
{
- /* Nothing to do in probe */
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
+
+ priv->fclk = dev_get_driver_data(bus);
+
return 0;
}
@@ -572,8 +579,8 @@ static const struct dm_spi_ops ti_qspi_ops = {
};
static const struct udevice_id ti_qspi_ids[] = {
- { .compatible = "ti,dra7xxx-qspi" },
- { .compatible = "ti,am4372-qspi" },
+ { .compatible = "ti,dra7xxx-qspi", .data = QSPI_DRA7XX_FCLK},
+ { .compatible = "ti,am4372-qspi", .data = QSPI_FCLK},
{ }
};
--
2.9.2
More information about the U-Boot
mailing list