[U-Boot] mmc erase Command and Bad Sectors
Jaehoon Chung
jh80.chung at samsung.com
Wed Jul 27 13:34:27 CEST 2016
On 07/26/2016 10:41 PM, Aron L. Phillips wrote:
> To whom it may concern:
>
> I am not sure how this email list works but I am interested in knowing what exactly does the mmc erase command do? I know it erases the mmc, but in what manner? Does it clear bad sector marks or for that matter, place them? Any explanation would be greatly appreciated. The type of mmc I am using is a Kingston eMMC data flash that is similar to an SD card on an IC.
> Sincerely,
Do you want to know ERASE command(CMD38) that supported on only u-boot side?
Best Regards,
Jaehoon Chung
>
>
>
> Aron L. Phillips
> Software/Hardware Developer
> GHI Electronics, LLC
> Where Hardware Meets Software
> 501 E. Whitcomb Ave
> Madison Heights, MI 48071, USA
> TEL: +1 (248) 397-8856
> FAX: +1 (248) 397-8890
> WEB: www.ghielectronics.com
>
> Disclaimer: The information transmitted and any attachments are intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient and received this in error, please contact the sender and delete the material from your system.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
More information about the U-Boot
mailing list