[U-Boot] build error

[Richard Snow]

Building current source for 4 boards (4 threads, 2 jobs per thread)
       arm:  +   q8_a33_tablet_800x480
+{standard input}: Assembler messages:
+{standard input}:299: Error: push/pop do not support {reglist}^ -- `pop
{r0,r1,r2,r3,r4,r9,ip,pc}^'
+make[3]: *** [arch/arm/cpu/armv7/sunxi/psci.o] Error 1
+make[2]: *** [arch/arm/cpu/armv7/sunxi] Error 2
+make[1]: *** [arch/arm/cpu/armv7] Error 2
+make: *** [sub-make] Error 2
       arm:  +   q8_a23_tablet_800x480
+{standard input}: Assembler messages:
+{standard input}:299: Error: push/pop do not support {reglist}^ -- `pop
{r0,r1,r2,r3,r4,r9,ip,pc}^'
+make[3]: *** [arch/arm/cpu/armv7/sunxi/psci.o] Error 1
+make[2]: *** [arch/arm/cpu/armv7/sunxi] Error 2
+make[1]: *** [arch/arm/cpu/armv7] Error 2
+make: *** [sub-make] Error 2
       arm:  +   q8_a33_tablet_1024x600
+{standard input}: Assembler messages:
+{standard input}:299: Error: push/pop do not support {reglist}^ -- `pop
{r0,r1,r2,r3,r4,r9,ip,pc}^'
+make[3]: *** [arch/arm/cpu/armv7/sunxi/psci.o] Error 1
+make[2]: *** [arch/arm/cpu/armv7/sunxi] Error 2
+make[1]: *** [arch/arm/cpu/armv7] Error 2
+make: *** [sub-make] Error 2
    1    0    3 /4      q8_a13_tablet
richard at ubuntu:~/u-boot$


My tablet is labeled AllDayMall model a88x bsf1.  The firmware that came
with it is defective the wifi does not work, i am trying to
set up to boot linux gentoo or other linux from sd card.

-- 
h <http://richardsnow.info>ttp://richardsnow.info
My Google Plus profile <http://www.google.com/profiles/rssnow1>