[U-Boot] [RESEND PATCH 3/4] ARM: dts: K2G: Add support for QSPI controller
Vignesh R
vigneshr at ti.com
Wed Jul 6 06:50:57 CEST 2016
K2G SoC has a Cadence QSPI controller to communicate with NOR flash
devices. Add DT nodes to support the same.
Also, K2G EVM has a s25fl512s flash connect to QSPI bus at CS 0. Add nor
flash slave node for the same.
Signed-off-by: Vignesh R <vigneshr at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
Reviewed-by: Jagan Teki <jteki at openedev.com>
---
arch/arm/dts/k2g-evm.dts | 45 +++++++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/k2g.dtsi | 14 ++++++++++++++
2 files changed, 59 insertions(+)
diff --git a/arch/arm/dts/k2g-evm.dts b/arch/arm/dts/k2g-evm.dts
index 38ca7ae1b6b9..e95efd476707 100644
--- a/arch/arm/dts/k2g-evm.dts
+++ b/arch/arm/dts/k2g-evm.dts
@@ -55,3 +55,48 @@
};
};
};
+
+&qspi {
+ status = "okay";
+
+ flash0: m25p80 at 0 {
+ compatible = "s25fl512s","spi-flash";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ tshsl-ns = <392>;
+ tsd2d-ns = <392>;
+ tchsh-ns = <100>;
+ tslch-ns = <100>;
+ block-size = <18>;
+
+
+ partition at 0 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition at 1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition at 2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition at 3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition at 4 {
+ label = "QSPI.kernel";
+ reg = <0x001C0000 0x0800000>;
+ };
+ partition at 5 {
+ label = "QSPI.file-system";
+ reg = <0x009C0000 0x3640000>;
+ };
+ };
+};
diff --git a/arch/arm/dts/k2g.dtsi b/arch/arm/dts/k2g.dtsi
index 88b1a8e998ac..00cd49297336 100644
--- a/arch/arm/dts/k2g.dtsi
+++ b/arch/arm/dts/k2g.dtsi
@@ -23,6 +23,7 @@
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
+ spi4 = &qspi;
};
memory {
@@ -84,6 +85,19 @@
bus_freq = <2500000>;
};
+ qspi: qspi at 2940000 {
+ compatible = "cadence,qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02940000 0x1000>,
+ <0x24000000 0x4000000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+ num-cs = <4>;
+ fifo-depth = <256>;
+ sram-size = <256>;
+ status = "disabled";
+ };
+
#include "k2g-netcp.dtsi"
pmmc: pmmc at 2900000 {
--
2.9.0
More information about the U-Boot
mailing list