[U-Boot] [PATCH v3 0/5] add support for rk3399 soc and evb

[Heiko Stübner]

Hi Kever,

Am Freitag, 15. Juli 2016, 16:42:08 schrieb Kever Yang:
> This patchset add support for rk3399 with ATF based on
> Rockchip miniloader as secondary bootloader instead of
> u-boot SPL.
> 
> Rockchip miniloader init the DRAM and load the ATF and
> u-boot to runing address, and then jump to ATF, ATM
> do some init and switch to EL2/EL1 mode before jump to
> next loader which is u-boot here.
> 
> Pls reference board/rockchip/evb_rk3399/README to setup
> the board.
> 
> Will migrate to SPL once its ready for ATF.
> 
> This patch set is based on below patch:
> "board: move all the rockchip board in one folder"
> 
> This patch set has been test on rk3399 evb board.

just for my own little board-farm, for the rk3368 the bringup should be 
similar, right?


> Changes in v3:
> Rebase on patch from Andreas:
> [PATCH] rockchip: Exclude rk_timer for ARM64
> [PATCH] rockchip: Clean up CPU selection
> 
> Changes in v2:
> fix description error on board Kconfig
> fix a binary path error
> 
> Kever Yang (5):
>   dts: add support for rkchichip rk3399 soc
>   ARM64: rockchip: add support for rk3399 SoC based evb-board
>   config: add config file for evb-rk3399
>   mmc: rockchip: add SDHCI driver support for rockchip soc
>   ARM64: evb-rk3399: add a README for this board setup

somehow this last patch never makes it to the lists in all 3 versions till 
now.


Heiko