[U-Boot] [RFC PATCH v3 3/5] spl: dfu: adding dfu support functions for SPL-DFU

Ravi Babu ravibabu at ti.com
Thu Jul 28 14:09:16 CEST 2016


Adding support functions to run dfu spl commands.

Signed-off-by: Ravi Babu <ravibabu at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
 common/spl/Makefile  |    1 +
 common/spl/spl_dfu.c |   57 ++++++++++++++++++++++++++++++++++++++++++++++++++
 include/spl.h        |    8 +++++++
 3 files changed, 66 insertions(+)
 create mode 100644 common/spl/spl_dfu.c

diff --git a/common/spl/Makefile b/common/spl/Makefile
index b15f0f6..5bd0b18 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -24,4 +24,5 @@ obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
 obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
 obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o
 obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
+obj-$(CONFIG_SPL_DFU_SUPPORT) += spl_dfu.o
 endif
diff --git a/common/spl/spl_dfu.c b/common/spl/spl_dfu.c
new file mode 100644
index 0000000..e8d0ba1
--- /dev/null
+++ b/common/spl/spl_dfu.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2016
+ * Texas Instruments, <www.ti.com>
+ *
+ * Ravi B <ravibabu at ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <errno.h>
+#include <watchdog.h>
+#include <console.h>
+#include <g_dnl.h>
+#include <usb.h>
+#include <dfu.h>
+#include <environment.h>
+
+static int run_dfu(int usb_index, char *interface, char *devstring)
+{
+	int ret;
+
+	ret = dfu_init_env_entities(interface, devstring);
+	if (ret) {
+		dfu_free_entities();
+		goto exit;
+	}
+
+	run_usb_dnl_gadget(usb_index, "usb_dnl_dfu");
+exit:
+	dfu_free_entities();
+	return ret;
+}
+
+int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr)
+{
+	char *str_env;
+	int ret;
+
+	/* set default environment */
+	set_default_env(0);
+	str_env = getenv(dfu_alt_info);
+	if (!str_env) {
+		error("\"dfu_alt_info\" env variable not defined!\n");
+		return -EINVAL;
+	}
+
+	ret = setenv("dfu_alt_info", str_env);
+	if (ret) {
+		error("unable to set env variable \"dfu_alt_info\"!\n");
+		return -EINVAL;
+	}
+
+	/* invoke dfu command */
+	return run_dfu(usbctrl, interface, devstr);
+}
diff --git a/include/spl.h b/include/spl.h
index 8afa085..30eda36 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -144,4 +144,12 @@ void spl_board_init(void);
  */
 bool spl_was_boot_source(void);
 
+/**
+ * spl_dfu_cmd- run dfu command with chosen mmc device interface
+ * @param usb_index - usb controller number
+ * @param mmc_dev -  mmc device nubmer
+ *
+ * @return 0 on success, otherwise error code
+ */
+int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
 #endif
-- 
1.7.9.5



More information about the U-Boot mailing list