[U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2 support
Peter Robinson
pbrobinson at gmail.com
Mon Jul 11 06:23:15 CEST 2016
On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber <afaerber at suse.de> wrote:
> Hi,
>
> Am 08.05.2016 um 08:30 schrieb Beniamino Galvani:
>> this series adds a very basic support for Amlogic S905 SoC (GXBaby)
>> and for the ODROID-C2 board [1], and is based on u-boot sources
>> available from the board vendor [2]. At the moment the only supported
>> devices are the integrated UART and Ethernet adapter.
>
> On current master with these four patches merged, should I expect to see
> any output after BL31? o.O
>
> Note that the README is outdated in that Hardkernel now has sources for
> fip_create and no binary any more. I've verified that the behavior is
> the same when using the binary and the self-compiled tool. Last output:
>
> NOTICE: BL3-1: v1.0(debug):4d2e34d
> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
> INFO: BL3-1: Initializing runtime services
> INFO: BL3-1: Preparing for EL3 exit to normal world
> INFO: BL3-1: Next image address = 0x1000000
> INFO: BL3-1: Next image spsr = 0x3c9
>
> I.e., no U-Boot SPL output on serial.
I see similar on Pine64 with 2016.07rc3
> P.S. The upstream arm-trusted-firmware fip_create tool doesn't know
> about --bl30 and --bl301 btw, anyone any insights?
If you find details on the upstream ATF support I'd love a link for more details
More information about the U-Boot
mailing list