[U-Boot] [U-Boot, 3/3] stm32: Change USART port to USART6 for stm32f746 discovery board

[Tom Rini]

On Fri, Jul 08, 2016 at 01:02:26AM +0900, tnishinaga.dev at gmail.com wrote:

> From: Toshifumi NISHINAGA <tnishinaga.dev at gmail.com>
> 
> This change is to remove a halt at about 200KiB
> while sending a large(1MiB) binary to a micro controller using USART1.
> USART1 is connected to a PC via an on-board ST-Link debugger
> that also functions as a USB-Serial converter.
> However, it seems to loss some data occasionally.
> So I changed the serial port to USART6 and connected it to the PC using
> an FTDI USB-Serial cable, therefore the transmission was successfully
> completed.
> 
> Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev at gmail.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160716/14309ad8/attachment.sig>