[U-Boot] [PATCH 8/9] power: pmic: add Ricoh RN5T567 PMIC support

Simon Glass sjg at chromium.org
Fri Jul 15 05:19:56 CEST 2016


Hi Stefan,

On 13 July 2016 at 00:10, Stefan Agner <stefan at agner.ch> wrote:
> On 2016-07-03 16:18, Simon Glass wrote:
>> Hi,
>>
>> On 3 July 2016 at 13:33, Stefan Agner <stefan at agner.ch> wrote:
>>> From: Stefan Agner <stefan.agner at toradex.com>
>>>
>>> Add power driver for Ricoh PMIC used on Colibri iMX7.
>>>
>>> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
>>> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>>> ---
>>>
>>>  drivers/power/pmic/Makefile       |   1 +
>>>  drivers/power/pmic/pmic_rn5t567.c |  32 +++++++++++
>>>  include/power/rn5t567_pmic.h      | 115 ++++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 148 insertions(+)
>>>  create mode 100644 drivers/power/pmic/pmic_rn5t567.c
>>>  create mode 100644 include/power/rn5t567_pmic.h
>>
>> Shouldn't this use driver model?
>
> Looked into this a bit more in detail.
>
> Afaict, using DM for PMIC would need to use DM for I2C too. The current
> driver supports I2C DM only when using device tree, plus it would also
> require DM for GPIOs, all that is currently not used by the i.MX 7
> platform.
>
> I would prefer to stick with the current implementation until that is
> sorted, is that acceptable for now?

Yes, but I hope you can resolve this quickly. It is not good to add
new code to old frameworks as they get harder to remove.

Regards,
Simon


More information about the U-Boot mailing list