[U-Boot] [PATCH 0/4] Add support for TI PCF8575 I2C GPIO expander

Vignesh R vigneshr at ti.com
Mon Jul 25 15:10:19 CEST 2016


This series adds support for TI's PCF8575 I2C GPIO expander[1] based on
Linux Kernel driver for the same.  Also adds support for ethernet to use
new PCF8575 driver to select appropriate cpsw slaves on dra72.

Depends on I2C DM support [2]

Tested on DRA72 EVM.

[1]http://www.ti.com/lit/ds/symlink/pcf8575.pdf
[2]https://www.mail-archive.com/u-boot@lists.denx.de/msg218923.html

Vignesh R (4):
  gpio: Add driver for TI PCF8575 I2C GPIO expander
  ARM: dra7xx_evm: Enable support for TI PCF8575
  net: cpsw: Add support to drive gpios for ethernet to be functional
  ARM: dts: dra72-evm: Add mode-gpios entry for mac node

 arch/arm/dts/dra72-evm.dts                     |   2 +-
 doc/device-tree-bindings/gpio/gpio-pcf857x.txt |  71 +++++++++
 drivers/gpio/Kconfig                           |   7 +
 drivers/gpio/Makefile                          |   1 +
 drivers/gpio/pcf8575_gpio.c                    | 199 +++++++++++++++++++++++++
 drivers/net/cpsw.c                             |  13 ++
 include/configs/dra7xx_evm.h                   |   5 +
 7 files changed, 297 insertions(+), 1 deletion(-)
 create mode 100644 doc/device-tree-bindings/gpio/gpio-pcf857x.txt
 create mode 100644 drivers/gpio/pcf8575_gpio.c

-- 
2.9.2



More information about the U-Boot mailing list