[U-Boot] [PATCH v2 0/9] mx7: add Colibri iMX7S/iMX7D support

Stefan Agner stefan at agner.ch
Tue Jul 19 18:09:37 CEST 2016


On 2016-07-19 07:18, stefano wrote:
> Hi Stefan,
> 
> On 18/07/2016 22:59, Stefan Agner wrote:
>> On 2016-07-13 00:25, Stefan Agner wrote:
>>> From: Stefan Agner <stefan.agner at toradex.com>
>>>
>>> This patchset adds support for the Toradex i.MX 7Solo and 7Dual
>>> based computer on modules Colibri iMX7S/iMX7D.
>>>
>>> It also brings several smaller i.MX 7 related fixes/cleanups.
>>
>> Is there anything holding us back merging this patchset?
>>
>> It touches several subsystems, ultimately the final patch adding the new
>> board is depending on all of them. What is the plan how to merge it?
>>
> 
> I see all patches are assigned to me - that makes sense to avoid some
> kind of breakages.
> 
> IMHO patches 1-4, 6-8 are ready to be merged. The best plan could be I
> start to apply them, and you resend an updated just for the ones to be
> changed. This should makes integration easier.

Afait, 5 should be fine too. The i.MX 6 changes will be in a separate
patch, and Tom agreed to the approach for the soc variable...

Will resend 9.

--
Stefan

> 
> Stefano
> 
>> --
>> Stefan
>>
>>>
>>> Changes since v1:
>>> - Dropped Ricoh RN5T567 PMIC support (for now)
>>> - Use CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG for runtime variables
>>> - Convert USB OTG Power Pin Polarity to Kconfig
>>> - Use gpio_request in lcd_setup
>>>
>>> Stefan Agner (9):
>>>   dm: imx: serial: Support DTE mode when using driver model
>>>   usb: move CONFIG_USB_EHCI_MX7 to Kconfig
>>>   usb: ehci-mx6: configure power polarity in usb_power_config
>>>   usb: ehci-mx6: introduce config for high active power pin
>>>   mx7: set soc environment according to exact SoC type
>>>   mx7_common: Put display board info config into board file
>>>   mx7_common: use Kconfig for ARMv7 non-secure mode
>>>   imx_watchdog: add weak attribute to reset_cpu function
>>>   colibri_imx7: add Colibri iMX7S/iMX7D module support
>>>
>>>  arch/arm/cpu/armv7/mx7/Kconfig            |   9 +
>>>  arch/arm/cpu/armv7/mx7/soc.c              |  14 +
>>>  board/toradex/colibri_imx7/Kconfig        |  12 +
>>>  board/toradex/colibri_imx7/MAINTAINERS    |   6 +
>>>  board/toradex/colibri_imx7/Makefile       |   6 +
>>>  board/toradex/colibri_imx7/colibri_imx7.c | 420 ++++++++++++++++++++++++++++++
>>>  board/toradex/colibri_imx7/imximage.cfg   | 150 +++++++++++
>>>  configs/colibri_imx7_defconfig            |  40 +++
>>>  configs/mx7dsabresd_defconfig             |   3 +
>>>  configs/warp7_defconfig                   |   4 +
>>>  drivers/serial/serial_mxc.c               |   9 +-
>>>  drivers/usb/host/Kconfig                  |  16 ++
>>>  drivers/usb/host/ehci-mx6.c               |  14 +-
>>>  drivers/watchdog/imx_watchdog.c           |   2 +-
>>>  include/configs/colibri_imx7.h            | 248 ++++++++++++++++++
>>>  include/configs/mx7_common.h              |  10 +-
>>>  include/configs/mx7dsabresd.h             |   4 +-
>>>  include/configs/warp7.h                   |   4 +-
>>>  include/dm/platform_data/serial_mxc.h     |   1 +
>>>  19 files changed, 953 insertions(+), 19 deletions(-)
>>>  create mode 100644 board/toradex/colibri_imx7/Kconfig
>>>  create mode 100644 board/toradex/colibri_imx7/MAINTAINERS
>>>  create mode 100644 board/toradex/colibri_imx7/Makefile
>>>  create mode 100644 board/toradex/colibri_imx7/colibri_imx7.c
>>>  create mode 100644 board/toradex/colibri_imx7/imximage.cfg
>>>  create mode 100644 configs/colibri_imx7_defconfig
>>>  create mode 100644 include/configs/colibri_imx7.h


More information about the U-Boot mailing list