[U-Boot] [PATCH v2] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ

Siva Durga Prasad Paladugu siva.durga.paladugu at xilinx.com
Fri Jul 22 11:21:51 CEST 2016


Add Kconfig entry config option for USB_EHCI_ZYNQ
and update the same to enable for all zynq boards
which supports USB

Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
Changes for v2:
- Made CONFIG_USB_EHCI_ZYNQ as default y as
  per review comment
---
 configs/zynq_microzed_defconfig |    2 ++
 configs/zynq_picozed_defconfig  |    2 ++
 configs/zynq_zc702_defconfig    |    2 ++
 configs/zynq_zc706_defconfig    |    2 ++
 configs/zynq_zed_defconfig      |    2 ++
 configs/zynq_zybo_defconfig     |    2 ++
 drivers/usb/host/Kconfig        |    7 +++++++
 include/configs/zynq-common.h   |    4 +---
 include/configs/zynq_microzed.h |    2 --
 include/configs/zynq_picozed.h  |    2 --
 include/configs/zynq_zc70x.h    |    1 -
 include/configs/zynq_zed.h      |    2 --
 include/configs/zynq_zybo.h     |    1 -
 13 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index d88c61b..d47c217 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -38,6 +38,8 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
index aeb1270..2b07633 100644
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -28,6 +28,8 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_ZYNQ_SDHCI=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index d68ed0e..a5484c6 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -43,6 +43,8 @@ CONFIG_DEBUG_UART_BASE=0xe0001000
 CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 8bd9230..ffb4053 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -39,6 +39,8 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
index c70b860..d9d8f67 100644
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -38,6 +38,8 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 624545e..7dbfe76 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -41,6 +41,8 @@ CONFIG_DEBUG_UART_BASE=0xe0001000
 CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 89580cc..5092251 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -85,6 +85,13 @@ config USB_EHCI_MSM
 	  This driver supports combination of Chipidea USB controller
 	  and Synapsys USB PHY in host mode only.
 
+config USB_EHCI_ZYNQ
+	bool "Support for Xilinx Zynq on-chip EHCI USB controller"
+	depends on ARCH_ZYNQ
+	default y
+	---help---
+	  Enable support for Zynq on-chip EHCI USB controller
+
 config USB_EHCI_GENERIC
 	bool "Support for generic EHCI USB controller"
 	depends on OF_CONTROL
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 8dbac87..08b7602 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -86,10 +86,8 @@
 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ	52000000
 #endif
 
-#ifdef CONFIG_ZYNQ_USB
-# define CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_ZYNQ
 # define CONFIG_USB_STORAGE
-# define CONFIG_USB_EHCI_ZYNQ
 # define CONFIG_EHCI_IS_TDI
 # define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
index ec7bb1c..e66088d 100644
--- a/include/configs/zynq_microzed.h
+++ b/include/configs/zynq_microzed.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ZYNQ_USB
-
 #include <configs/zynq-common.h>
 
 #endif /* __CONFIG_ZYNQ_MICROZED_H */
diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h
index adc4d0f..f2598a2 100644
--- a/include/configs/zynq_picozed.h
+++ b/include/configs/zynq_picozed.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ZYNQ_USB
-
 #include <configs/zynq-common.h>
 
 #endif /* __CONFIG_ZYNQ_PICOZED_H */
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index 8a04590..a27b49c 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -12,7 +12,6 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ZYNQ_USB
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_EEPROM
 
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
index 150cb4a..dbb4621 100644
--- a/include/configs/zynq_zed.h
+++ b/include/configs/zynq_zed.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ZYNQ_USB
-
 #include <configs/zynq-common.h>
 
 #endif /* __CONFIG_ZYNQ_ZED_H */
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h
index 637b1c5..ca3ad9c 100644
--- a/include/configs/zynq_zybo.h
+++ b/include/configs/zynq_zybo.h
@@ -13,7 +13,6 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ZYNQ_USB
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_I2C1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-- 
1.7.1



More information about the U-Boot mailing list