[U-Boot] [PATCH 2/4] ARM: uniphier: rename outer-cache register macros
Masahiro Yamada
yamada.masahiro at socionext.com
Fri Jul 22 06:38:31 CEST 2016
Sync register macros with Linux code. This will be helpful to
develop the counterpart of Linux.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/arm/mach-uniphier/arm32/Makefile | 2 +-
arch/arm/mach-uniphier/arm32/cache-uniphier.c | 163 ++++++++++++++++++++++
arch/arm/mach-uniphier/arm32/cache_uniphier.c | 156 ---------------------
arch/arm/mach-uniphier/arm32/late_lowlevel_init.S | 4 +-
arch/arm/mach-uniphier/arm32/lowlevel_init.S | 14 +-
arch/arm/mach-uniphier/arm32/ssc-regs.h | 100 ++++++-------
6 files changed, 224 insertions(+), 215 deletions(-)
create mode 100644 arch/arm/mach-uniphier/arm32/cache-uniphier.c
delete mode 100644 arch/arm/mach-uniphier/arm32/cache_uniphier.c
diff --git a/arch/arm/mach-uniphier/arm32/Makefile b/arch/arm/mach-uniphier/arm32/Makefile
index 376c06b..5074ebd 100644
--- a/arch/arm/mach-uniphier/arm32/Makefile
+++ b/arch/arm/mach-uniphier/arm32/Makefile
@@ -7,7 +7,7 @@ obj-y += lowlevel_init.o
obj-$(CONFIG_DEBUG_LL) += debug_ll.o
else
obj-y += late_lowlevel_init.o
-obj-y += cache_uniphier.o
+obj-y += cache-uniphier.o
endif
obj-y += timer.o
diff --git a/arch/arm/mach-uniphier/arm32/cache-uniphier.c b/arch/arm/mach-uniphier/arm32/cache-uniphier.c
new file mode 100644
index 0000000..a58f008
--- /dev/null
+++ b/arch/arm/mach-uniphier/arm32/cache-uniphier.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro at socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/io.h>
+#include <asm/armv7.h>
+
+#include "ssc-regs.h"
+
+#ifdef CONFIG_UNIPHIER_L2CACHE_ON
+static void uniphier_cache_sync(void)
+{
+ /* drain internal buffers */
+ writel(UNIPHIER_SSCOPE_CM_SYNC, UNIPHIER_SSCOPE);
+ /* need a read back to confirm */
+ readl(UNIPHIER_SSCOPE);
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+ /* clear the complete notification flag */
+ writel(UNIPHIER_SSCOLPQS_EF, UNIPHIER_SSCOLPQS);
+
+ /* try until the command is successfully set */
+ do {
+ writel(UNIPHIER_SSCOQM_S_ALL | UNIPHIER_SSCOQM_CE | operation,
+ UNIPHIER_SSCOQM);
+ } while (readl(UNIPHIER_SSCOPPQSEF) &
+ (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE));
+
+ /* wait until the operation is completed */
+ while (readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF)
+ ;
+
+ uniphier_cache_sync();
+}
+
+void v7_outer_cache_flush_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+void v7_outer_cache_inval_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation)
+{
+ /* clear the complete notification flag */
+ writel(UNIPHIER_SSCOLPQS_EF, UNIPHIER_SSCOLPQS);
+
+ /* try until the command is successfully set */
+ do {
+ writel(UNIPHIER_SSCOQM_S_RANGE | UNIPHIER_SSCOQM_CE | operation,
+ UNIPHIER_SSCOQM);
+ writel(start, UNIPHIER_SSCOQAD);
+ writel(size, UNIPHIER_SSCOQSZ);
+
+ } while (readl(UNIPHIER_SSCOPPQSEF) &
+ (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE));
+
+ /* wait until the operation is completed */
+ while (readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF)
+ ;
+}
+
+static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation)
+{
+ u32 size;
+
+ /*
+ * If start address is not aligned to cache-line,
+ * do cache operation for the first cache-line
+ */
+ start = start & ~(UNIPHIER_SSC_LINE_SIZE - 1);
+
+ size = end - start;
+
+ if (unlikely(size >= (u32)(-UNIPHIER_SSC_LINE_SIZE))) {
+ /* this means cache operation for all range */
+ uniphier_cache_maint_all(operation);
+ return;
+ }
+
+ /*
+ * If end address is not aligned to cache-line,
+ * do cache operation for the last cache-line
+ */
+ size = ALIGN(size, UNIPHIER_SSC_LINE_SIZE);
+
+ while (size) {
+ u32 chunk_size = size > UNIPHIER_SSC_RANGE_OP_MAX_SIZE ?
+ UNIPHIER_SSC_RANGE_OP_MAX_SIZE : size;
+ __uniphier_cache_maint_range(start, chunk_size, operation);
+
+ start += chunk_size;
+ size -= chunk_size;
+ }
+
+ uniphier_cache_sync();
+}
+
+void v7_outer_cache_flush_range(u32 start, u32 end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+void v7_outer_cache_inval_range(u32 start, u32 end)
+{
+ if (start & (UNIPHIER_SSC_LINE_SIZE - 1)) {
+ start &= ~(UNIPHIER_SSC_LINE_SIZE - 1);
+ __uniphier_cache_maint_range(start, UNIPHIER_SSC_LINE_SIZE,
+ UNIPHIER_SSCOQM_CM_FLUSH);
+ start += UNIPHIER_SSC_LINE_SIZE;
+ }
+
+ if (start >= end) {
+ uniphier_cache_sync();
+ return;
+ }
+
+ if (end & (UNIPHIER_SSC_LINE_SIZE - 1)) {
+ end &= ~(UNIPHIER_SSC_LINE_SIZE - 1);
+ __uniphier_cache_maint_range(end, UNIPHIER_SSC_LINE_SIZE,
+ UNIPHIER_SSCOQM_CM_FLUSH);
+ }
+
+ if (start >= end) {
+ uniphier_cache_sync();
+ return;
+ }
+
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
+}
+
+void v7_outer_cache_enable(void)
+{
+ u32 tmp;
+
+ writel(U32_MAX, UNIPHIER_SSCLPDAWCR); /* activate all ways */
+ tmp = readl(UNIPHIER_SSCC);
+ tmp |= UNIPHIER_SSCC_ON;
+ writel(tmp, UNIPHIER_SSCC);
+}
+#endif
+
+void v7_outer_cache_disable(void)
+{
+ u32 tmp;
+
+ tmp = readl(UNIPHIER_SSCC);
+ tmp &= ~UNIPHIER_SSCC_ON;
+ writel(tmp, UNIPHIER_SSCC);
+}
+
+void enable_caches(void)
+{
+ dcache_enable();
+}
diff --git a/arch/arm/mach-uniphier/arm32/cache_uniphier.c b/arch/arm/mach-uniphier/arm32/cache_uniphier.c
deleted file mode 100644
index 3d984a7..0000000
--- a/arch/arm/mach-uniphier/arm32/cache_uniphier.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro at socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <asm/armv7.h>
-
-#include "ssc-regs.h"
-
-#ifdef CONFIG_UNIPHIER_L2CACHE_ON
-static void uniphier_cache_sync(void)
-{
- writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */
- readl(SSCOPE); /* need a read back to confirm */
-}
-
-static void uniphier_cache_maint_all(u32 operation)
-{
- /* clear the complete notification flag */
- writel(SSCOLPQS_EF, SSCOLPQS);
-
- /* try until the command is successfully set */
- do {
- writel(SSCOQM_S_ALL | SSCOQM_CE | operation, SSCOQM);
- } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE));
-
- /* wait until the operation is completed */
- while (readl(SSCOLPQS) != SSCOLPQS_EF)
- ;
-
- uniphier_cache_sync();
-}
-
-void v7_outer_cache_flush_all(void)
-{
- uniphier_cache_maint_all(SSCOQM_CM_WB_INV);
-}
-
-void v7_outer_cache_inval_all(void)
-{
- uniphier_cache_maint_all(SSCOQM_CM_INV);
-}
-
-static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation)
-{
- /* clear the complete notification flag */
- writel(SSCOLPQS_EF, SSCOLPQS);
-
- /* try until the command is successfully set */
- do {
- writel(SSCOQM_S_ADDRESS | SSCOQM_CE | operation, SSCOQM);
- writel(start, SSCOQAD);
- writel(size, SSCOQSZ);
-
- } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE));
-
- /* wait until the operation is completed */
- while (readl(SSCOLPQS) != SSCOLPQS_EF)
- ;
-}
-
-static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation)
-{
- u32 size;
-
- /*
- * If start address is not aligned to cache-line,
- * do cache operation for the first cache-line
- */
- start = start & ~(SSC_LINE_SIZE - 1);
-
- size = end - start;
-
- if (unlikely(size >= (u32)(-SSC_LINE_SIZE))) {
- /* this means cache operation for all range */
- uniphier_cache_maint_all(operation);
- return;
- }
-
- /*
- * If end address is not aligned to cache-line,
- * do cache operation for the last cache-line
- */
- size = ALIGN(size, SSC_LINE_SIZE);
-
- while (size) {
- u32 chunk_size = size > SSC_RANGE_OP_MAX_SIZE ?
- SSC_RANGE_OP_MAX_SIZE : size;
- __uniphier_cache_maint_range(start, chunk_size, operation);
-
- start += chunk_size;
- size -= chunk_size;
- }
-
- uniphier_cache_sync();
-}
-
-void v7_outer_cache_flush_range(u32 start, u32 end)
-{
- uniphier_cache_maint_range(start, end, SSCOQM_CM_WB_INV);
-}
-
-void v7_outer_cache_inval_range(u32 start, u32 end)
-{
- if (start & (SSC_LINE_SIZE - 1)) {
- start &= ~(SSC_LINE_SIZE - 1);
- __uniphier_cache_maint_range(start, SSC_LINE_SIZE,
- SSCOQM_CM_WB_INV);
- start += SSC_LINE_SIZE;
- }
-
- if (start >= end) {
- uniphier_cache_sync();
- return;
- }
-
- if (end & (SSC_LINE_SIZE - 1)) {
- end &= ~(SSC_LINE_SIZE - 1);
- __uniphier_cache_maint_range(end, SSC_LINE_SIZE,
- SSCOQM_CM_WB_INV);
- }
-
- if (start >= end) {
- uniphier_cache_sync();
- return;
- }
-
- uniphier_cache_maint_range(start, end, SSCOQM_CM_INV);
-}
-
-void v7_outer_cache_enable(void)
-{
- u32 tmp;
-
- writel(U32_MAX, SSCLPDAWCR); /* activate all ways */
- tmp = readl(SSCC);
- tmp |= SSCC_ON;
- writel(tmp, SSCC);
-}
-#endif
-
-void v7_outer_cache_disable(void)
-{
- u32 tmp;
- tmp = readl(SSCC);
- tmp &= ~SSCC_ON;
- writel(tmp, SSCC);
-}
-
-void enable_caches(void)
-{
- dcache_enable();
-}
diff --git a/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S b/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S
index cce91df..001d732 100644
--- a/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S
+++ b/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S
@@ -10,9 +10,9 @@
#include "ssc-regs.h"
ENTRY(lowlevel_init)
- ldr r1, = SSCC
+ ldr r1, = UNIPHIER_SSCC
ldr r0, [r1]
- bic r0, r0, #SSCC_ON @ L2 disable
+ bic r0, r0, #UNIPHIER_SSCC_ON @ L2 disable
str r0, [r1]
mov pc, lr
ENDPROC(lowlevel_init)
diff --git a/arch/arm/mach-uniphier/arm32/lowlevel_init.S b/arch/arm/mach-uniphier/arm32/lowlevel_init.S
index cc34116..1b7e2d7 100644
--- a/arch/arm/mach-uniphier/arm32/lowlevel_init.S
+++ b/arch/arm/mach-uniphier/arm32/lowlevel_init.S
@@ -94,26 +94,26 @@ ENTRY(setup_init_ram)
*/
0:
/*
- * set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order
+ * set UNIPHIER_SSCOQM, UNIPHIER_SSCOQAD, UNIPHIER_SSCOQSZ, UNIPHIER_SSCOQWN in this order
*/
ldr r0, = 0x00408006 @ touch to zero with address range
- ldr r1, = SSCOQM
+ ldr r1, = UNIPHIER_SSCOQM
str r0, [r1]
ldr r0, = BOOT_RAM_BASE
- ldr r1, = SSCOQAD
+ ldr r1, = UNIPHIER_SSCOQAD
str r0, [r1]
ldr r0, = BOOT_RAM_SIZE
- ldr r1, = SSCOQSZ
+ ldr r1, = UNIPHIER_SSCOQSZ
str r0, [r1]
ldr r0, = BOOT_WAY_BITS
- ldr r1, = SSCOQWN
+ ldr r1, = UNIPHIER_SSCOQWN
str r0, [r1]
- ldr r1, = SSCOPPQSEF
+ ldr r1, = UNIPHIER_SSCOPPQSEF
ldr r0, [r1]
cmp r0, #0 @ check if the command is successfully set
bne 0b @ try again if an error occurs
- ldr r1, = SSCOLPQS
+ ldr r1, = UNIPHIER_SSCOLPQS
1:
ldr r0, [r1]
cmp r0, #0x4
diff --git a/arch/arm/mach-uniphier/arm32/ssc-regs.h b/arch/arm/mach-uniphier/arm32/ssc-regs.h
index 02fca3b..e698f1e 100644
--- a/arch/arm/mach-uniphier/arm32/ssc-regs.h
+++ b/arch/arm/mach-uniphier/arm32/ssc-regs.h
@@ -9,57 +9,59 @@
#ifndef ARCH_SSC_REGS_H
#define ARCH_SSC_REGS_H
-#define SSCC 0x500c0000
-#define SSCC_BST (0x1 << 20)
-#define SSCC_ACT (0x1 << 19)
-#define SSCC_WTG (0x1 << 18)
-#define SSCC_PRD (0x1 << 17)
-#define SSCC_WBWA (0x1 << 16)
-#define SSCC_EX (0x1 << 13)
-#define SSCC_ON (0x1 << 0)
+/* control registers */
+#define UNIPHIER_SSCC 0x500c0000 /* Control Register */
+#define UNIPHIER_SSCC_BST (0x1 << 20) /* UCWG burst read */
+#define UNIPHIER_SSCC_ACT (0x1 << 19) /* Inst-Data separate */
+#define UNIPHIER_SSCC_WTG (0x1 << 18) /* WT gathering on */
+#define UNIPHIER_SSCC_PRD (0x1 << 17) /* enable pre-fetch */
+#define UNIPHIER_SSCC_ON (0x1 << 0) /* enable cache */
+#define UNIPHIER_SSCLPDAWCR 0x500c0030 /* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR 0x500c0034 /* Instruction Active Way Control */
-#define SSCLPDAWCR 0x500c0030
+/* revision registers */
+#define UNIPHIER_SSCID 0x503c0100 /* ID Register */
-#define SSCOPE 0x506c0244
-#define SSCOPE_CM_SYNC 0x00000008
+/* operation registers */
+#define UNIPHIER_SSCOPE 0x506c0244 /* Cache Operation Primitive Entry */
+#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
+#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
+#define UNIPHIER_SSCOQM 0x506c0248
+#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
+#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
+#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
+#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
+#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
+#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
+#define UNIPHIER_SSCOQM_CE (0x1 << 15) /* notify completion */
+#define UNIPHIER_SSCOQM_CW (0x1 << 14)
+#define UNIPHIER_SSCOQM_CM_MASK (0x7)
+#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
+#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
+#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
+#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
+#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
+#define UNIPHIER_SSCOQAD 0x506c024c /* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ 0x506c0250 /* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK 0x506c0254 /* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN 0x506c0258 /* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF 0x506c025c /* Cache Operation Queue Set Complete */
+#define UNIPHIER_SSCOPPQSEF_FE (0x1 << 1)
+#define UNIPHIER_SSCOPPQSEF_OE (0x1 << 0)
+#define UNIPHIER_SSCOLPQS 0x506c0260 /* Cache Operation Queue Status */
+#define UNIPHIER_SSCOLPQS_EF (0x1 << 2)
+#define UNIPHIER_SSCOLPQS_EST (0x1 << 1)
+#define UNIPHIER_SSCOLPQS_QST (0x1 << 0)
-#define SSCOQM 0x506c0248
-#define SSCOQM_TID_MASK (0x3 << 21)
-#define SSCOQM_TID_BY_WAY (0x2 << 21)
-#define SSCOQM_TID_BY_INST_WAY (0x1 << 21)
-#define SSCOQM_TID_BY_DATA_WAY (0x0 << 21)
-#define SSCOQM_S_MASK (0x3 << 17)
-#define SSCOQM_S_WAY (0x2 << 17)
-#define SSCOQM_S_ALL (0x1 << 17)
-#define SSCOQM_S_ADDRESS (0x0 << 17)
-#define SSCOQM_CE (0x1 << 15)
-#define SSCOQM_CW (0x1 << 14)
-#define SSCOQM_CM_MASK (0x7)
-#define SSCOQM_CM_DIRT_TOUCH (0x7)
-#define SSCOQM_CM_ZERO_TOUCH (0x6)
-#define SSCOQM_CM_NORM_TOUCH (0x5)
-#define SSCOQM_CM_PREF_FETCH (0x4)
-#define SSCOQM_CM_SSC_FETCH (0x3)
-#define SSCOQM_CM_WB_INV (0x2)
-#define SSCOQM_CM_WB (0x1)
-#define SSCOQM_CM_INV (0x0)
-
-#define SSCOQAD 0x506c024c
-#define SSCOQSZ 0x506c0250
-#define SSCOQWN 0x506c0258
-
-#define SSCOPPQSEF 0x506c025c
-#define SSCOPPQSEF_FE (0x1 << 1)
-#define SSCOPPQSEF_OE (0x1 << 0)
-
-#define SSCOLPQS 0x506c0260
-#define SSCOLPQS_EF (0x1 << 2)
-#define SSCOLPQS_EST (0x1 << 1)
-#define SSCOLPQS_QST (0x1 << 0)
-
-#define SSCOQCE0 0x506c0270
-
-#define SSC_LINE_SIZE 128
-#define SSC_RANGE_OP_MAX_SIZE (0x00400000 - (SSC_LINE_SIZE))
+#define UNIPHIER_SSC_LINE_SIZE 128
+#define UNIPHIER_SSC_RANGE_OP_MAX_SIZE (0x00400000 - (UNIPHIER_SSC_LINE_SIZE))
#endif /* ARCH_SSC_REGS_H */
--
1.9.1
More information about the U-Boot
mailing list