[U-Boot] [PATCH 9/9] colibri_imx7: add Colibri iMX7S/iMX7D module support

Stefan Agner stefan at agner.ch
Sun Jul 3 21:33:54 CEST 2016


From: Stefan Agner <stefan.agner at toradex.com>

This commit adds support for the Toradex Computer on Modules
Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence
can be easily supported by one board. The board code detects RAM
size at runtime which is one of the differences between the two
boards. The board also uses the UART's in DTE mode, hence making
use of the new DTE support via serial DM.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

 arch/arm/cpu/armv7/mx7/Kconfig            |   7 +
 board/toradex/colibri_imx7/Kconfig        |  12 +
 board/toradex/colibri_imx7/MAINTAINERS    |   6 +
 board/toradex/colibri_imx7/Makefile       |   6 +
 board/toradex/colibri_imx7/colibri_imx7.c | 458 ++++++++++++++++++++++++++++++
 board/toradex/colibri_imx7/imximage.cfg   | 150 ++++++++++
 configs/colibri_imx7_defconfig            |  39 +++
 include/configs/colibri_imx7.h            | 256 +++++++++++++++++
 8 files changed, 934 insertions(+)
 create mode 100644 board/toradex/colibri_imx7/Kconfig
 create mode 100644 board/toradex/colibri_imx7/MAINTAINERS
 create mode 100644 board/toradex/colibri_imx7/Makefile
 create mode 100644 board/toradex/colibri_imx7/colibri_imx7.c
 create mode 100644 board/toradex/colibri_imx7/imximage.cfg
 create mode 100644 configs/colibri_imx7_defconfig
 create mode 100644 include/configs/colibri_imx7.h

diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig
index dd51384..5fdc8dd 100644
--- a/arch/arm/cpu/armv7/mx7/Kconfig
+++ b/arch/arm/cpu/armv7/mx7/Kconfig
@@ -27,12 +27,19 @@ config TARGET_WARP7
 	select DM
 	select DM_THERMAL
 
+config TARGET_COLIBRI_IMX7
+	bool "Support Colibri iMX7S/iMX7D modules"
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+
 endchoice
 
 config SYS_SOC
 	default "mx7"
 
 source "board/freescale/mx7dsabresd/Kconfig"
+source "board/toradex/colibri_imx7/Kconfig"
 source "board/warp7/Kconfig"
 
 endif
diff --git a/board/toradex/colibri_imx7/Kconfig b/board/toradex/colibri_imx7/Kconfig
new file mode 100644
index 0000000..622ce66
--- /dev/null
+++ b/board/toradex/colibri_imx7/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_COLIBRI_IMX7
+
+config SYS_BOARD
+	default "colibri_imx7"
+
+config SYS_VENDOR
+	default "toradex"
+
+config SYS_CONFIG_NAME
+	default "colibri_imx7"
+
+endif
diff --git a/board/toradex/colibri_imx7/MAINTAINERS b/board/toradex/colibri_imx7/MAINTAINERS
new file mode 100644
index 0000000..5ffb241
--- /dev/null
+++ b/board/toradex/colibri_imx7/MAINTAINERS
@@ -0,0 +1,6 @@
+Colibri iMX7
+M:	Stefan Agner <stefan.agner at toradex.com>
+S:	Maintained
+F:	board/toradex/colibri_imx7/
+F:	include/configs/colibri_imx7.h
+F:	configs/colibri_imx7_defconfig
diff --git a/board/toradex/colibri_imx7/Makefile b/board/toradex/colibri_imx7/Makefile
new file mode 100644
index 0000000..ea597de
--- /dev/null
+++ b/board/toradex/colibri_imx7/Makefile
@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Toradex AG
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := colibri_imx7.o
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
new file mode 100644
index 0000000..c320ead
--- /dev/null
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2016 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx7-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_mxc.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <power/pmic.h>
+#include <power/rn5t567_pmic.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_DSE_3P3V_49OHM | \
+	PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
+
+#define ENET_PAD_CTRL  (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
+#define ENET_PAD_CTRL_MII  (PAD_CTL_DSE_3P3V_32OHM)
+
+#define ENET_RX_PAD_CTRL  (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
+
+#define I2C_PAD_CTRL    (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
+
+#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
+	PAD_CTL_DSE_3P3V_49OHM)
+
+#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
+
+#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
+
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* I2C1 for PMIC */
+static struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX7D_PAD_GPIO1_IO04__I2C1_SCL | PC,
+		.gpio_mode = MX7D_PAD_GPIO1_IO04__GPIO1_IO4 | PC,
+		.gp = IMX_GPIO_NR(1, 4),
+	},
+	.sda = {
+		.i2c_mode = MX7D_PAD_GPIO1_IO05__I2C1_SDA | PC,
+		.gpio_mode = MX7D_PAD_GPIO1_IO05__GPIO1_IO5 | PC,
+		.gp = IMX_GPIO_NR(1, 5),
+	},
+};
+/* I2C4 for Colibri I2C */
+static struct i2c_pads_info i2c_pad_info4 = {
+	.scl = {
+		.i2c_mode = MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL | PC,
+		.gpio_mode = MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 | PC,
+		.gp = IMX_GPIO_NR(7, 8),
+	},
+	.sda = {
+		.i2c_mode = MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA | PC,
+		.gpio_mode = MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 | PC,
+		.gp = IMX_GPIO_NR(7, 9),
+	},
+};
+#endif
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX7D_PAD_GPIO1_IO00__GPIO1_IO0 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const gpmi_pads[] = {
+	MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CLK__NAND_CLE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__NAND_ALE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__NAND_RE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_RESET_B__NAND_WE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	| MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
+};
+
+static void setup_gpmi_nand(void)
+{
+	imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
+
+	/* NAND_USDHC_BUS_CLK is set in rom */
+	set_clk_nand();
+}
+#endif
+
+static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
+	MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__SD3_STROBE	 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+#ifdef CONFIG_VIDEO_MXS
+static iomux_v3_cfg_t const lcd_pads[] = {
+	MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+	/* Backlight On */
+	MX7D_PAD_SD1_WP__GPIO5_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	/* Backlight PWM<A> (multiplexed pin) */
+	MX7D_PAD_GPIO1_IO08__GPIO1_IO8   | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static int setup_lcd(void)
+{
+	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+
+	imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads));
+
+	/* Set BL_ON */
+	gpio_direction_output(IMX_GPIO_NR(5, 1), 1);
+
+	/* Set PWM<A> to full brightness (assuming inversed polarity) */
+	gpio_direction_output(IMX_GPIO_NR(1, 8), 0);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+static iomux_v3_cfg_t const fec1_pads[] = {
+#ifndef CONFIG_COLIBRI_EXT_PHYCLK
+	MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION,
+#else
+	MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+#endif
+	MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	  | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+	imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define USDHC1_CD_GPIO	IMX_GPIO_NR(1, 0)
+
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+	{USDHC1_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = !gpio_get_value(USDHC1_CD_GPIO);
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+	/* USDHC1 is mmc0 */
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+			gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
+			gpio_direction_input(USDHC1_CD_GPIO);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+				"(%d) than supported by the board\n", i + 1);
+			return -EINVAL;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int board_eth_init(bd_t *bis)
+{
+	int ret;
+
+	setup_iomux_fec();
+
+	ret = fecmxc_initialize_multi(bis, 0,
+		CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
+	if (ret)
+		printf("FEC1 MXC: %s:failed\n", __func__);
+
+	return ret;
+}
+
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+		= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+#ifndef CONFIG_COLIBRI_EXT_PHYCLK
+	/*
+	 * Use 50M anatop REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17]
+	 * and output it on the pin
+	 */
+	clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+			IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK,
+			IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK);
+#else
+	/* Use 50M external CLK for ENET1, set gpr1[13], clear gpr1[17] */
+	clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+			IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK,
+			IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK);
+#endif
+
+	return set_clk_enet(ENET_50MHz);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+	return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+#ifdef CONFIG_SYS_I2C_MXC
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+	setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4);
+#endif
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+	setup_lcd();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"nand", MAKE_CFGVAL(0x40, 0x34, 0x00, 0x00)},
+	{"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)},
+	{NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_POWER
+#define I2C_PMIC	0
+int power_init_board(void)
+{
+	struct pmic *p;
+	int ret;
+
+	unsigned int reg, ver;
+
+	ret = power_rn5t567_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("RN5T567");
+	ret = pmic_probe(p);
+	if (ret)
+		return ret;
+
+	pmic_reg_read(p, RN5T567_LSIVER, &ver);
+	pmic_reg_read(p, RN5T567_OTPVER, &reg);
+	printf("PMIC:  RN5T567 LSIVER=0x%x OTPVER=0x%x\n", ver, reg);
+
+	/* set jduge and press timer of N_OE to minimal values */
+	pmic_reg_read(p, RN5T567_NOETIMSETCNT, &reg);
+	reg &= ~0x7;
+	pmic_reg_write(p, RN5T567_NOETIMSETCNT, reg);
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	struct pmic *p;
+	p = pmic_get("RN5T567");
+
+	/* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */
+	pmic_reg_write(p, RN5T567_REPCNT, 0x1);
+	pmic_reg_write(p, RN5T567_SLPCNT, 0x1);
+}
+#endif
+
+int checkboard(void)
+{
+	printf("Model: Toradex Colibri iMX7%c\n",
+	       is_cpu_type(MXC_CPU_MX7D) ? 'D' : 'S');
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_EHCI_MX7
+static iomux_v3_cfg_t const usb_otg2_pads[] = {
+	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_ehci_hcd_init(int port)
+{
+	switch (port) {
+	case 0:
+		break;
+	case 1:
+		if (is_cpu_type(MXC_CPU_MX7S))
+			return -ENODEV;
+
+		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+						 ARRAY_SIZE(usb_otg2_pads));
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+#endif
+
+static struct mxc_serial_platdata mxc_serial_plat = {
+	.reg = (struct mxc_uart *)UART1_IPS_BASE_ADDR,
+	.use_dte = true,
+};
+
+U_BOOT_DEVICE(mxc_serial) = {
+	.name   = "serial_mxc",
+	.platdata = &mxc_serial_plat,
+};
diff --git a/board/toradex/colibri_imx7/imximage.cfg b/board/toradex/colibri_imx7/imximage.cfg
new file mode 100644
index 0000000..d891e82
--- /dev/null
+++ b/board/toradex/colibri_imx7/imximage.cfg
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *               2015 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : sd
+ */
+
+BOOT_FROM	sd
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* IOMUXC_GPR_GPR1 */
+DATA 4 0x30340004 0x4F400005
+
+/* DDR3L */
+/* assuming MEMC_FREQ_RATIO = 2 */
+/* SRC_DDRC_RCR */
+DATA 4 0x30391000 0x00000002
+/* DDRC_MSTR */
+DATA 4 0x307a0000 0x01040001
+/* DDRC_DFIUPD0 */
+DATA 4 0x307a01a0 0x80400003
+/* DDRC_DFIUPD1 */
+DATA 4 0x307a01a4 0x00100020
+/* DDRC_DFIUPD2 */
+DATA 4 0x307a01a8 0x80100004
+/* DDRC_RFSHTMG */
+DATA 4 0x307a0064 0x00400045
+/* DDRC_MP_PCTRL_0 */
+DATA 4 0x307a0490 0x00000001
+/* DDRC_INIT0 */
+DATA 4 0x307a00d0 0x00020083
+/* DDRC_INIT1 */
+DATA 4 0x307a00d4 0x00690000
+/* DDRC_INIT3 MR0/MR1 */
+DATA 4 0x307a00dc 0x09300004
+/* DDRC_INIT4 MR2/MR3 */
+DATA 4 0x307a00e0 0x04480000
+/* DDRC_INIT5 */
+DATA 4 0x307a00e4 0x00100004
+/* DDRC_RANKCTL */
+DATA 4 0x307a00f4 0x0000033f
+/* DDRC_DRAMTMG0 */
+DATA 4 0x307a0100 0x090b090a
+/* DDRC_DRAMTMG1 */
+DATA 4 0x307a0104 0x000d020d
+/* DDRC_DRAMTMG2 */
+DATA 4 0x307a0108 0x03040307
+/* DDRC_DRAMTMG3 */
+DATA 4 0x307a010c 0x00002006
+/* DDRC_DRAMTMG4 */
+DATA 4 0x307a0110 0x04020205
+/* DDRC_DRAMTMG5 */
+DATA 4 0x307a0114 0x03030202
+/* DDRC_DRAMTMG8 */
+DATA 4 0x307a0120 0x00000803
+/* DDRC_ZQCTL0 */
+DATA 4 0x307a0180 0x00800020
+/* DDRC_ZQCTL1 */
+DATA 4 0x307a0184 0x02001000
+/* DDRC_DFITMG0 */
+DATA 4 0x307a0190 0x02098204
+/* DDRC_DFITMG1 */
+DATA 4 0x307a0194 0x00030303
+/* DDRC_ADDRMAP0 */
+DATA 4 0x307a0200 0x0000001f
+/* DDRC_ADDRMAP1 */
+DATA 4 0x307a0204 0x00080808
+/* DDRC_ADDRMAP5 */
+DATA 4 0x307a0214 0x07070707
+/* DDRC_ADDRMAP6 */
+DATA 4 0x307a0218 0x07070707
+/* DDRC_ODTCFG */
+DATA 4 0x307a0240 0x06000601
+/* DDRC_ODTMAP */
+DATA 4 0x307a0244 0x00000011
+/* SRC_DDRC_RCR */
+DATA 4 0x30391000 0x00000000
+/* DDR_PHY_PHY_CON0 */
+DATA 4 0x30790000 0x17420f40
+/* DDR_PHY_PHY_CON1 */
+DATA 4 0x30790004 0x10210100
+/* DDR_PHY_PHY_CON4 */
+DATA 4 0x30790010 0x00060807
+/* DDR_PHY_MDLL_CON0 */
+DATA 4 0x307900b0 0x1010007e
+/* DDR_PHY_DRVDS_CON0 */
+DATA 4 0x3079009c 0x00000d6e
+/* DDR_PHY_OFFSET_RD_CON0 */
+DATA 4 0x30790020 0x08080808
+/* DDR_PHY_OFFSET_WR_CON0 */
+DATA 4 0x30790030 0x08080808
+/* DDR_PHY_CMD_SDLL_CON0 */
+DATA 4 0x30790050 0x01000010
+DATA 4 0x30790050 0x00000010
+
+/* DDR_PHY_ZQ_CON0 */
+DATA 4 0x307900c0 0x0e407304
+DATA 4 0x307900c0 0x0e447304
+DATA 4 0x307900c0 0x0e447306
+/* DDR_PHY_ZQ_CON1 */
+CHECK_BITS_SET 4 0x307900c4 0x1
+/* DDR_PHY_ZQ_CON0 */
+DATA 4 0x307900c0 0x0e447304
+DATA 4 0x307900c0 0x0e407304
+
+/* CCM_CCGRn */
+DATA 4 0x30384130 0x00000000
+/* IOMUXC_GPR_GPR8 */
+DATA 4 0x30340020 0x00000178
+/* CCM_CCGRn */
+DATA 4 0x30384130 0x00000002
+/* DDR_PHY_LP_CON0 */
+DATA 4 0x30790018 0x0000000f
+
+/* DDRC_STAT */
+CHECK_BITS_SET 4 0x307a0004 0x1
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
new file mode 100644
index 0000000..c87ac9f
--- /dev/null
+++ b/configs/colibri_imx7_defconfig
@@ -0,0 +1,39 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_TARGET_COLIBRI_IMX7=y
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
+CONFIG_BOOTDELAY=1
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Colibri iMX7 # "
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
new file mode 100644
index 0000000..57ee6a3
--- /dev/null
+++ b/include/configs/colibri_imx7.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * Configuration settings for the Colibri iMX7 module.
+ *
+ * based on mx7dsabresd.h:
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __COLIBRI_IMX7_CONFIG_H
+#define __COLIBRI_IMX7_CONFIG_H
+
+#include "mx7_common.h"
+
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_USE_ARCH_MEMSET
+
+/*#define CONFIG_DBG_MONITOR*/
+#define PHYS_SDRAM_SIZE			SZ_512M
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
+
+/* Uncomment to enable secure boot support */
+/* #define CONFIG_SECURE_BOOT */
+#define CONFIG_CSF_SIZE			0x4000
+
+#define CONFIG_CMD_BMODE
+
+/* Network */
+#define CONFIG_COLIBRI_EXT_PHYCLK
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE             RMII
+#define CONFIG_ETHPRIME                 "FEC"
+#define CONFIG_FEC_MXC_PHYADDR          0
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_TFTP_TSIZE
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE		16384
+
+/* ENET1 */
+#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
+
+/* MMC Config*/
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_RN5T567
+#define CONFIG_POWER_RN5T567_I2C_ADDR	0x33
+
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
+
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_SPEED		100000
+
+#define CONFIG_IPADDR			192.168.10.2
+#define CONFIG_NETMASK			255.255.255.0
+#define CONFIG_SERVERIP			192.168.10.1
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"fdt_addr_r=0x82000000\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"ramdisk_addr_r=0x82100000\0"
+
+#define SD_BOOTCMD \
+	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
+	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
+	"run m4boot && " \
+	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define NFS_BOOTCMD \
+	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
+	"nfsboot=run setup; " \
+		"setenv bootargs ${defargs} ${nfsargs} " \
+		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
+		"dhcp ${kernel_addr_r} && "	\
+		"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define UBI_BOOTCMD	\
+	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
+		"ubi.fm_autoconvert=1\0" \
+	"ubiboot=run setup; " \
+		"setenv bootargs ${defargs} ${ubiargs} " \
+		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
+		"ubi part ubi && run m4boot && " \
+		"ubi read ${kernel_addr_r} kernel && " \
+		"ubi read ${fdt_addr_r} dtb && " \
+		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	MEM_LAYOUT_ENV_SETTINGS \
+	NFS_BOOTCMD \
+	SD_BOOTCMD \
+	UBI_BOOTCMD \
+	"console=ttymxc0\0" \
+	"defargs=\0" \
+	"fdt_board=eval-v3\0" \
+	"fdt_fixup=;\0" \
+	"m4boot=;\0" \
+	"ip_dyn=yes\0" \
+	"kernel_file=zImage\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+		"${board}/flash_eth.img && source ${loadaddr}\0" \
+	"setsdupdate=mmc rescan && setenv interface mmc && " \
+		"fatload ${interface} 0:1 ${loadaddr} " \
+		"${board}/flash_blk.img && source ${loadaddr}\0" \
+	"setup=setenv setupargs " \
+		"console=tty1 console=${console}" \
+		",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
+	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+	"setusbupdate=usb start && setenv interface usb && " \
+		"fatload ${interface} 0:1 ${loadaddr} " \
+		"${board}/flash_blk.img && source ${loadaddr}\0" \
+	"splashpos=m,m\0" \
+	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x0c000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
+#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+#define CONFIG_ENV_OFFSET		(4 * 1024 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#endif
+
+#define CONFIG_NAND_MXS
+#define CONFIG_CMD_NAND_TRIMFFS
+
+/* NAND stuff */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
+#define CONFIG_CMD_NAND_TORTURE
+
+/* UBI stuff */
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_MTD_UBI_FASTMAP
+#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:"		\
+				"512k(mx7-bcb),"		\
+				"3584k(u-boot)ro,"		\
+				"512k(u-boot-env),"		\
+				"-(ubi)"
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* USB Configs */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX7
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+#define CONFIG_IMX_THERMAL
+
+#define CONFIG_USBD_HS
+
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+/* USB Device Firmware Update support */
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
+#define DFU_DEFAULT_POLL_TIMEOUT	300
+
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+#endif
-- 
2.9.0



More information about the U-Boot mailing list