[U-Boot] [PATCH 2/2] mips: xilfpga: Add device tree files

Zubair Lutfullah Kakakhel Zubair.Kakakhel at imgtec.com
Wed Jul 27 12:51:01 CEST 2016


Mostly the same as the Kernel upstream device tree file except for

- alias for the serial console node
- ethernet node as the ethernet stuff isn't upstream on kernel.org yet
- uart clock-frequency passed directly in the node

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
Reviewed-by: Paul Burton <paul.burton at imgtec.com>
---
 arch/mips/dts/Makefile        |  1 +
 arch/mips/dts/microAptiv.dtsi | 21 +++++++++++++++
 arch/mips/dts/nexys4ddr.dts   | 62 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 84 insertions(+)
 create mode 100644 arch/mips/dts/microAptiv.dtsi
 create mode 100644 arch/mips/dts/nexys4ddr.dts

diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index 2f04d73..5f311d4 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
 dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
 dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb
 dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
+dtb-$(CONFIG_TARGET_XILFPGA) += nexys4ddr.dtb
 dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
 
 targets += $(dtb-y)
diff --git a/arch/mips/dts/microAptiv.dtsi b/arch/mips/dts/microAptiv.dtsi
new file mode 100644
index 0000000..81d518e
--- /dev/null
+++ b/arch/mips/dts/microAptiv.dtsi
@@ -0,0 +1,21 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "img,xilfpga";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "mips,m14Kc";
+			clocks	= <&ext>;
+			reg = <0>;
+		};
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/mips/dts/nexys4ddr.dts b/arch/mips/dts/nexys4ddr.dts
new file mode 100644
index 0000000..e254ab1
--- /dev/null
+++ b/arch/mips/dts/nexys4ddr.dts
@@ -0,0 +1,62 @@
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+	compatible = "digilent,nexys4ddr";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	cpuintc: interrupt-controller at 0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	aliases {
+		console = &axi_uart16550;
+	};
+
+	axi_ethernetlite: ethernet at 10e00000 {
+		compatible = "xlnx,xps-ethernetlite-1.00.a";
+		device_type = "network";
+		local-mac-address = [08 86 4C 0D F7 09];
+		phy-handle = <&phy0>;
+		reg = <0x10e00000 0x10000>;
+		xlnx,duplex = <0x1>;
+		xlnx,include-global-buffers = <0x1>;
+		xlnx,include-internal-loopback = <0x0>;
+		xlnx,include-mdio = <0x1>;
+		xlnx,instance = "axi_ethernetlite_inst";
+		xlnx,rx-ping-pong = <0x1>;
+		xlnx,s-axi-id-width = <0x1>;
+		xlnx,tx-ping-pong = <0x1>;
+		xlnx,use-internal = <0x0>;
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: phy at 1 {
+				compatible = <0x0007c0f0 0xfffffff0>;
+				device_type = "ethernet-phy";
+				reg = <1>;
+			} ;
+		} ;
+        } ;
+
+
+	axi_uart16550: serial at 10400000 {
+		compatible = "ns16550a";
+		reg = <0x10400000 0x10000>;
+
+		reg-shift = <2>;
+		reg-offset = <0x1000>;
+
+		clock-frequency = <50000000>;
+
+	};
+};
+
-- 
1.9.1



More information about the U-Boot mailing list