[U-Boot] [PATCH] configs: da850evm: enable bootz command

[Kevin Hilman]

Sekhar Nori <nsekhar at ti.com> writes:

> Enable bootz command on Texas Instruments DA850 EVM
> board. This helps it boot zImage with device-tree
> blob passed.
>
> Signed-off-by: Sekhar Nori <nsekhar at ti.com>

Tested-by: Kevin Hilman <khilman at baylibre.com>

Thanks!  This was the only change I needed to use the latest mainline
u-boot on my da850evm.

Kevin