[U-Boot] [PATCH v2 11/11] Drop references to MAKEALL in the documentation

[Simon Glass]

It is confusing to mention MAKEALL when it is not the normal way of building
U-Boot anymore. Update the documentation to suit.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

Changes in v2: None

 README                             | 35 ++++++-----------------------------
 board/Barix/ipam390/README.ipam390 | 12 ++++++------
 doc/README.sha1                    |  5 +++--
 3 files changed, 15 insertions(+), 37 deletions(-)

diff --git a/README b/README
index cadb571..30d7ee3 100644
--- a/README
+++ b/README
@@ -2756,7 +2756,7 @@ CBFS (Coreboot Filesystem) support
 		with a special header) as build targets. By defining
 		CONFIG_BUILD_TARGET in the SoC / board header, this
 		special image will be automatically built upon calling
-		make / MAKEALL.
+		make / buildman.
 
 		CONFIG_IDENT_STRING
 
@@ -5083,33 +5083,10 @@ official or latest in the git repository) version of U-Boot sources.
 But before you submit such a patch, please verify that your modifi-
 cation did not break existing code. At least make sure that *ALL* of
 the supported boards compile WITHOUT ANY compiler warnings. To do so,
-just run the "MAKEALL" script, which will configure and build U-Boot
-for ALL supported system. Be warned, this will take a while. You can
-select which (cross) compiler to use by passing a `CROSS_COMPILE'
-environment variable to the script, i. e. to use the ELDK cross tools
-you can type
-
-	CROSS_COMPILE=ppc_8xx- MAKEALL
-
-or to build on a native PowerPC system you can type
-
-	CROSS_COMPILE=' ' MAKEALL
-
-When using the MAKEALL script, the default behaviour is to build
-U-Boot in the source directory. This location can be changed by
-setting the BUILD_DIR environment variable. Also, for each target
-built, the MAKEALL script saves two log files (<target>.ERR and
-<target>.MAKEALL) in the <source dir>/LOG directory. This default
-location can be changed by setting the MAKEALL_LOGDIR environment
-variable. For example:
-
-	export BUILD_DIR=/tmp/build
-	export MAKEALL_LOGDIR=/tmp/log
-	CROSS_COMPILE=ppc_8xx- MAKEALL
-
-With the above settings build objects are saved in the /tmp/build,
-log files are saved in the /tmp/log and the source tree remains clean
-during the whole build process.
+just run the buildman script (tools/buildman/buildman), which will
+configure and build U-Boot for ALL supported system. Be warned, this
+will take a while. Please see the buildman README, or run 'buildman -H'
+for documentation.
 
 
 See also "U-Boot Porting Guide" below.
@@ -6565,7 +6542,7 @@ it:
 
 Notes:
 
-* Before sending the patch, run the MAKEALL script on your patched
+* Before sending the patch, run the buildman script on your patched
   source tree and make sure that no errors or warnings are reported
   for any of the boards.
 
diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390
index 5c45fca..be09280 100644
--- a/board/Barix/ipam390/README.ipam390
+++ b/board/Barix/ipam390/README.ipam390
@@ -31,9 +31,9 @@ loading the next image from a different media, etc).
 
 Compilation
 ===========
-run "./MAKEALL ipam390" in the u-boot source tree.
-Once this build completes you will have a u-boot.ais file that needs to
-be written to the nand flash.
+run "tools/buildman/buildman -k ipam390" in the u-boot source tree.
+Once this build completes you will have a ../current/ipam390/u-boot.ais file
+that needs to be written to the nand flash.
 
 Flashing the images to NAND
 ==========================
@@ -71,13 +71,13 @@ here[1] to create an uboot-uart-ais.bin file
 - cd to the u-boot source tree
 
 - compile the u-boot for the ipam390 board:
-$ ./MAKEALL ipam390
+$ tools/buildman/buildman -k ipam390
 
   -> Now we shall have u-boot.bin
 
 - Create u-boot-uart-ais.bin
-$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini
-ipam390-ais-uart.cfg -o ./uboot-uart-ais.bin ./u-boot.bin at 0xC1080000;
+$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \
+	-o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin at 0xC1080000;
 
 Note: The ipam390-ais-uart.cfg is found in the board directory
 for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg
diff --git a/doc/README.sha1 b/doc/README.sha1
index f6cca40..f178f37 100644
--- a/doc/README.sha1
+++ b/doc/README.sha1
@@ -51,7 +51,8 @@ c) now calculate the SHA1 sum from the memoryrange and write
 
 Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
 
-If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
-the correct SHA1 sum will be automagically included in the U-Boot image.
+If you do a "buildman -k pcs440ep" or a "make all" to get the U-Boot image,
+which will be found in ../current/ipam390/ - the correct SHA1 sum will be
+automagically included in the U-Boot image.
 
 Heiko Schocher, 11 Jul 2007
-- 
2.8.0.rc3.226.g39d4020