[U-Boot] [RFC PATCH v2 0/5] SPL: DFU Support in SPL

[B, Ravi]

Tom

>> >How well did you test DFU on other platforms after these changes?
>> >Thanks
>> 
>> Actually earlier platforms did not had this support,  support for 
>> either RNDIS boot mode (CONFIG_SPL_USBETH_SUPPORT) or CONFIG_SPL_USB_SUPPORT (boot from mass-storage device) were only supported.

>Yes, sorry, I mean you're making generic DFU code changes too, did you test them on other TI platforms which support DFU in other cases to make sure nothing slipped in and broke them with these changes?

I got your point, You are referring to generic dfu code changes, that is moving common dfu code to  common/dfu.c , 
so that both u-boot and SPL can leverage common code. But this change is generic cleanup code.
Yes, I did test DFU functionality on other platforms (say AM335X).  I can check other platform as well. 

But SPL-DFU is tied with ROM-USB peripheral boot mode, I cannot test other than DRA7X/AM57X.
But in order to verify the SPL-DFU boot on other platform,  I have tested SPL-DFU on AM335x,  hacking common/spl/spl.c to
execute SPL-DFU code by default and could able to load u-boot.img into RAM and boot to u-boot. (using dfu-utils from PC host).

Let me know I have clarified.

Regards
Ravi