[U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support
Lukasz Majewski
l.majewski at samsung.com
Mon Jul 4 09:18:47 CEST 2016
Hi Rajesh,
>
>
> > -----Original Message-----
> > From: Lukasz Majewski [mailto:l.majewski at samsung.com]
> > Sent: Thursday, June 23, 2016 8:27 PM
> > To: Rajat Srivastava <rajat.srivastava at nxp.com>
> > Cc: u-boot at lists.denx.de; sjg at chromium.org; marex at denx.de;
> > albert.u.boot at aribaud.net; prabhakar at freescale.com; york sun
> > <york.sun at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Rajesh Bhagat
> > <rajesh.bhagat at nxp.com>; michal.simek at xilinx.com;
> > felipe.balbi at linux.intel.com Subject: Re: [PATCH v2 3/4]
> > armv8/fsl-layerscape: add dwc3 gadget driver support
> >
> > Hi Rajat,
> >
> > > Implements the dwc3 gadget driver support for LS1043 platform, and
> > > performs below operations:
> > > 1. Enables snooping support for DWC3 controller.
> > > 2. Enables cache coherency in LS1043 platform.
> > >
> > > Signed-off-by: Rajat Srivastava <rajat.srivastava at nxp.com>
> > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> > > Reviewed-by: Lukasz Majewski <l.majewski at samsung.com>
> > > ---
> > > Changes in v2:
> > > - Moves DWC3 driver specific code to helper functions
> > > - Calls helper functions in SoC specific implementation
> > >
> > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93
> > > ++++++++++++++++++++++ .../include/asm/arch-fsl-
> > layerscape/immap_lsch2
> > > ++++++++++++++++++++++ .h
> > > | 6 ++ 2 files changed, 99 insertions(+)
> > >
> > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0fb5c7f..cc07524
> > > 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > > @@ -17,6 +17,10 @@
> > > #ifdef CONFIG_CHAIN_OF_TRUST
> > > #include <fsl_validate.h>
> > > #endif
> > > +#include <usb.h>
> > > +#include <dwc3-uboot.h>
> > > +#include <linux/usb/xhci-fsl.h>
> > > +
> > >
> > > DECLARE_GLOBAL_DATA_PTR;
> > >
> > > @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) #if
> > > defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
> > > out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif
> > > + /* Make SEC and USB reads and writes snoopable */ #if
> > > +defined(CONFIG_LS1043A)
> > > + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
> > > + SCFG_SNPCNFGCR_SECWRSNP |
> > > SCFG_SNPCNFGCR_USB1RDSNP |
> > > + SCFG_SNPCNFGCR_USB1WRSNP |
> > > SCFG_SNPCNFGCR_USB2RDSNP |
> > > + SCFG_SNPCNFGCR_USB2WRSNP |
> > > SCFG_SNPCNFGCR_USB3RDSNP |
> > > + SCFG_SNPCNFGCR_USB3WRSNP);
> > > +#else
> > > /* Make SEC reads and writes snoopable */
> > > setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
> > > SCFG_SNPCNFGCR_SECWRSNP);
> > > +#endif
> > >
> > > /*
> > > * Enable snoop requests and DVM message requests for @@
> > > -336,6 +349,86 @@ void fsl_lsch2_early_init_f(void) } #endif
> > >
> > > +#ifdef CONFIG_USB_DWC3
> > > +
> > > +#if defined(CONFIG_LS1043A)
> > > +static struct dwc3_device dwc3_device_data0 = {
> > > + .maximum_speed = USB_SPEED_HIGH,
> > > + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
> > > + .dr_mode = USB_DR_MODE_PERIPHERAL,
> > > + .index = 0,
> > > +};
> > > +
> > > +static struct dwc3_device dwc3_device_data1 = {
> > > + .maximum_speed = USB_SPEED_HIGH,
> > > + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
> > > + .dr_mode = USB_DR_MODE_PERIPHERAL,
> > > + .index = 1,
> > > +};
> > > +
> > > +static struct dwc3_device dwc3_device_data2 = {
> > > + .maximum_speed = USB_SPEED_HIGH,
> > > + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
> > > + .dr_mode = USB_DR_MODE_PERIPHERAL,
> > > + .index = 2,
> > > +};
> > > +
> > > +int usb_gadget_handle_interrupts(int index) {
> > > + dwc3_uboot_handle_interrupt(index);
> > > + return 0;
> > > +}
> > > +#endif
> > > +
> > > +int board_usb_init(int index, enum usb_init_type init)
> >
>
> Hello Lukasz,
>
> > Are those usb related functions generic? To ask in another way,
> > would it be possible to reuse those functions for other armv8
> > boards?
> >
>
> We are planning to use the above code for all the armv8 boards, e.g.
> LS1043A and LS1012A as they use the same chasis. Hence kept the code
> in armv8 specific file instead of board files.
Ok, thanks for clarification.
>
> Best Regards,
> Rajesh Bhagat
>
> > Please correct me if I'm wrong, but it seems that LS1043 is a
> > single board. Maybe it would be better to place this code in a
> > separate ./board/nxp/ls1043 directory?
> >
> > > +{
> > > + switch (init) {
> > > + case USB_INIT_DEVICE:
> > > + switch (index) {
> > > +#if defined(CONFIG_LS1043A)
> > > + case 0:
> > > + dwc3_uboot_init(&dwc3_device_data0);
> > > + break;
> > > + case 1:
> > > + dwc3_uboot_init(&dwc3_device_data1);
> > > + break;
> > > + case 2:
> > > + dwc3_uboot_init(&dwc3_device_data2);
> > > + break;
> > > +#endif
> > > + default:
> > > + printf("Invalid Controller Index\n");
> > > + return -1;
> > > + }
> > > +#if defined(CONFIG_LS1043A)
> > > + dwc3_core_incr_burst_enable(index, 0xf, 0xf);
> > > + dwc3_core_set_snooping(index, true); #endif
> > > + break;
> > > + default:
> > > + break;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +int board_usb_cleanup(int index, enum usb_init_type init) {
> > > + switch (init) {
> > > + case USB_INIT_DEVICE:
> > > +#if defined(CONFIG_LS1043A)
> > > + dwc3_uboot_exit(index);
> > > +#endif
> > > + break;
> > > + default:
> > > + break;
> > > + }
> > > + return 0;
> > > +}
> > > +#endif
> > > +
> > > +
> > > +
> > > #ifdef CONFIG_BOARD_LATE_INIT
> > > int board_late_init(void)
> > > {
> > > diff --git
> > > a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index
> > > 57b99d4..13ba1a6 100644 ---
> > > a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++
> > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@
> > > -328,6 +328,12 @@ struct ccsr_gur { #define
> > > SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define
> > > SCFG_SNPCNFGCR_SECWRSNP 0x40000000 +#define
> > > SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 +#define
> > > SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 +#define
> > > SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 +#define
> > > SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 +#define
> > > SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 +#define
> > > SCFG_SNPCNFGCR_USB3WRSNP 0x00004000
> > >
> > > /* Supplemental Configuration Unit */ struct ccsr_scfg {
> >
> >
> >
> > --
> > Best regards,
> >
> > Lukasz Majewski
> >
> > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list