[U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI flash works

[Steve Arnold]

So is there a fix to be had by maybe shifting both CONFIG_SPL_TEXT_BASE and
CONFIG_SYS_TEXT_BASE a little bit?

Steve

On Tue, Jul 26, 2016 at 2:14 PM, Stephen Warren <swarren at wwwdotorg.org>
wrote:

> On 07/26/2016 12:49 PM, Steve Arnold wrote:
>
>> I did mention it was black and showed nothing on serial console with the
>> default values, ie, building as-is doesn't even show u-boot trying to
>> load (after flashing it to the SPI flash the last thing you see is
>> "Resetting...").  Power it back up and nothing happens, no u-boot, nada.
>>
>
> It looks like there's some issue if the total flash image size is over
> 512KiB. (The physical flash chip is 1MiB). I'm investigating whether this
> is expected and what to do about it. The change to CONFIG_SYS_TEXT_BASE
> accidentally solves this, since it currently happens to shrink the image
> size enough not to hit this apparent limit.
>



-- 
--
nerdboy _at_ gentoo dot org
http://dev.gentoo.org~/nerdboy