[U-Boot] [PATCH] board: ls1012aqds: Update LBMAP_MASK and RST_CTL_RESET

[Prabhakar Kushwaha]

qixis_reset altbank usagge ~QIXIS_LBMAP_MASK in code. So define
inverse value QIXIS_LBMAP_MASK.

Also, update QIXIS_RST_CTL_RESET value to keep RST_CTL[REQ_MOD]
as 0b11 i.e. PORESET during qixis_reset

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
---
 include/configs/ls1012aqds.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index fcf402c..6e31ca0 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -28,11 +28,11 @@
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_LBMAP_BRDCFG_REG		0x04
 #define QIXIS_LBMAP_SWITCH		6
-#define QIXIS_LBMAP_MASK		0xf7
+#define QIXIS_LBMAP_MASK		0x08
 #define QIXIS_LBMAP_SHIFT		0
 #define QIXIS_LBMAP_DFLTBANK		0x00
 #define QIXIS_LBMAP_ALTBANK		0x08
-#define QIXIS_RST_CTL_RESET		0x41
+#define QIXIS_RST_CTL_RESET		0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
-- 
1.9.1