[U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases

Jagan Teki jagannadh.teki at gmail.com
Wed Jul 27 09:54:26 CEST 2016


On 19 July 2016 at 14:40, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Dont set quad enable for micron devices in all cases
> Setting the quad enable bit in micron expects all other
> commands like register reads on quad lines which may
> not be supported by some controllers. Hence, dont
> set the quad enable if controller driver sets the
> no_all_quad.

Sorry, I'm not fond of controller hacks, please try for any other
solution and even planning to remove existing ones.

thanks!
-- 
Jagan.


More information about the U-Boot mailing list