[U-Boot] [PATCH] powerpc: p1_p2_rdb_pc: rename to P2020RDB_PC

[york sun]

On 01/05/2016 01:57 PM, york.sun at nxp.com wrote:
> On 01/05/2016 01:38 PM, York Sun wrote:
>>
>>
>> On 01/05/2016 10:40 AM, Bryan Hundven wrote:
>>> On Tue, Jan 05, 2016 at 09:01:17AM -0800, York Sun wrote:
>>>>
>>>>
>>>> On 12/23/2015 07:40 AM, Bryan Hundven wrote:
>>>>> York,
>>>>>
>>>>> Just checking if you had seen this patch?
>>>>>
>>>>
>>>> Yes, I noticed. You rename P2020RDB to P2020RDB_PC. Do you have another patch
>>>> using P2020RDB?
>>>
>>> It may be irrelevant. I have a p1020rdb-pb. So technically, unless we
>>> want to support p2020rdb-pb (which I don't have, and cannot test), you can
>>> ignore this one.
>>>
>>> I have work here: https://github.com/bhundven/u-boot/tree/p1_p2_rdb-wip
>>> where I have reverted removing the p1_p2_rdb board, but have started to
>>> clean up the difference between p1_p2_rdb and p1_p2_rdb_pc. Eventually,
>>> it makes sense to me to move p1_p2_rdb_pc to p1_p2_rdb, as it has pc,
>>> and pd. If I can get time to finish, it would have p1020rdb-pb. Then just
>>> add the small difference for p1011rdb/p1020rdb-pb.
>>> What are your opinions on that?
>>
>> I like clean and small changes.
>>
>>>
>>> The things that are difficult right now are:
>>>  * ddr(2) does not use spd on pb?
>>
>> If I remember correctly, these boards have fixed DDR. RAW timing method was
>> introduced to p1_p2_rdb_pc. You are welcome to use this method. It should be
>> easy to back port.
>>
>>>  * I have the ltib cds that came with the board, but I still feel like
>>>    I'm missing a reference manual that is for the pb version. I can find
>>>    the pc and pd versions of the 1020RM online. pb just seems a little
>>>    different.
>>
>> These boards are actually made by third parties. I have P1010RDB on my hand. If
>> you need P1020RDB, I can find it for you.
>>
>
> Bryan,
>
> I checked the last release for P1020RDB. It was on 2010-11-01. The schematic is
> included in the LTIB DVD under help/Hardware/P1020RDB.
>


Bryan,

Where are we on this patch? If you don't want to move forward, I can 
drop this for now.

York