[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards

Jaehoon Chung jh80.chung at samsung.com
Wed Jul 27 13:15:48 CEST 2016


On 07/27/2016 04:28 PM, Yangbo Lu wrote:
> Hi Tom,
> 
> Could you help to assign this mmc patch reviewing to right person?
> It seems no one had reviewed it for almost half year.
> 
> And another my mmc patch also needs to be reviewed.
> I submitted in May. Please help.
> http://patchwork.ozlabs.org/patch/624448/
> 
> 
> Thank you very much.
> 
> 
> Best regards,
> Yangbo Lu
> 
>> -----Original Message-----
>> From: Yangbo Lu [mailto:yangbo.lu at nxp.com]
>> Sent: Wednesday, March 09, 2016 11:00 AM
>> To: u-boot at lists.denx.de
>> Cc: Pantelis Antoniou; Yangbo Lu
>> Subject: [PATCH] mmc: send CMD0 before CMD1 for some MMC cards
>>
>> When the MMC framework was added in u-boot, the mmc_go_idle was added
>> before mmc_send_op_cond_iter in function mmc_send_op_cond annotating that
>> some cards seemed to need this. Actually, we still need to do this in
>> function mmc_complete_op_cond for those cards.
>> This has been verified on Micron MTFC4GACAECN eMMC chip.

If there is no go_idle(), then what happen?
If you share the information more, i can check the more..

Best Regards,
Jaehoon Chung

>>
>> Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
>> ---
>>  drivers/mmc/mmc.c | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index ede5d6e..82e3268
>> 100644
>> --- a/drivers/mmc/mmc.c
>> +++ b/drivers/mmc/mmc.c
>> @@ -418,6 +418,9 @@ static int mmc_complete_op_cond(struct mmc *mmc)
>>  	uint start;
>>  	int err;
>>
>> +	/* Some cards seem to need this */
>> +	mmc_go_idle(mmc);
>> +
>>  	mmc->op_cond_pending = 0;
>>  	if (!(mmc->ocr & OCR_BUSY)) {
>>  		start = get_timer(0);
>> --
>> 2.1.0.27.g96db324
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 
> 



More information about the U-Boot mailing list