[U-Boot] [PATCH v3 1/4] usb: rockchip-phy: implement USB2.0 phy control for Synopsys

[Ziyuan Xu]

Hi heiko,

On 2016年07月06日 17:34, Ziyuan Xu wrote:
> From: Xu Ziyuan <xzy.xu at rock-chips.com>
>
> So far, Rockchip SoCs have two kinds of USB2.0 phy, like Synopsys and
> Innosilicon. This patch applys dwc2 usb driver framework to implement
> phy_init and phy_off for Synopsys phy on Rockchip platform.
>
> Signed-off-by: Ziyuan Xu <xzy.xu at rock-chips.com>
>
> ---
>
> Changes in v3:
> - Make UOC_CON registers to be unfixed which should be got from DT
>
> Changes in v2:
> - Rename rk3288_usb_phy.c to rockchip_usb_syno_phy.c
> - Rework the behaviour in otg_phy_init() and otg_phy_off()
>
>   drivers/usb/phy/Makefile                |  1 +
>   drivers/usb/phy/rockchip_usb_syno_phy.c | 47 +++++++++++++++++++++++++++++++++
>   2 files changed, 48 insertions(+)
>   create mode 100644 drivers/usb/phy/rockchip_usb_syno_phy.c
>
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 93d147e..8002a18 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -7,3 +7,4 @@
>   
>   obj-$(CONFIG_TWL4030_USB) += twl4030.o
>   obj-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o
> +obj-$(CONFIG_ROCKCHIP_USB_SYNO_PHY) += rockchip_usb_syno_phy.o
> diff --git a/drivers/usb/phy/rockchip_usb_syno_phy.c b/drivers/usb/phy/rockchip_usb_syno_phy.c
> new file mode 100644
> index 0000000..ab049e1
> --- /dev/null
> +++ b/drivers/usb/phy/rockchip_usb_syno_phy.c
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright 2016 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +
> +#include "../gadget/dwc2_udc_otg_priv.h"
> +
> +#define UOC_CON(x)		((x) * 0x4)
As you know, dwc2 usb driver didn't apply devicetree model. It's hard to 
implement a compatible driver for Rockchip SoCs which use a same udc.
For example,
SOFT_CTRL bit is  UOC_CON2[2] on RK3288
I can't assure it's also UOC_CON[2] on other socs.
Do you have any good ideas?
> +
> +#define RESET_WRITE_ENA		BIT(28)
> +#define PORT_RESET		BIT(12)
> +#define PORT_NORMAL		(0 << 12)
> +
> +#define SOFT_CTRL_WRITE_ENA	BIT(18)
> +#define SOFT_CTRL_ENABLE	BIT(2)
> +
> +#define SUSPEND_SETTING		0x2A
> +#define SUSPEND_WRITE_ENA	(0x3f << 16)
> +
> +
> +void otg_phy_init(struct dwc2_udc *dev)
> +{
> +	/* disable software control */
> +	writel(SOFT_CTRL_WRITE_ENA | (0 << 2),
> +	       dev->pdata->regs_phy + UOC_CON(2));
> +	/* reset otg port */
> +	writel(RESET_WRITE_ENA | PORT_RESET,
> +	       dev->pdata->regs_phy + UOC_CON(0));
> +	mdelay(1);
> +	writel(RESET_WRITE_ENA | PORT_NORMAL,
> +	       dev->pdata->regs_phy + UOC_CON(0));
> +	udelay(1);
> +}
> +
> +void otg_phy_off(struct dwc2_udc *dev)
> +{
> +	/* enable software control */
> +	writel(SOFT_CTRL_WRITE_ENA | SOFT_CTRL_ENABLE,
> +	       dev->pdata->regs_phy + UOC_CON(2));
> +	/* enter suspend */
> +	writel(SUSPEND_WRITE_ENA | SUSPEND_SETTING,
> +	       dev->pdata->regs_phy + UOC_CON(3));
> +}