[U-Boot] [PATCH 3/3] ARM: tegra: unify Tegra186 Makefile a bit

Stephen Warren swarren at wwwdotorg.org
Mon Jul 18 20:15:05 CEST 2016


From: Stephen Warren <swarren at nvidia.com>

Many files in arch/arm/mach-tegra are compiled conditionally based on
Kconfig variables, or applicable to all platforms. We can let the main
Tegra Makefile handle compiling (or not) those files to avoid each SoC-
specific Makefile needing to duplicate entries for those files. This
leaves the SoC-specific Makefiles to compile truly SoC-specific code.

In the future, we'll hopefully add Kconfig variables for all the other
files, and refactor those files, and so reduce the need for SoC-specific
Makefiles and/or ifdefs in the Makefiles.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 arch/arm/mach-tegra/Makefile          | 12 ++++++------
 arch/arm/mach-tegra/tegra186/Makefile |  3 ---
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 12ee1cd7495b..3b8d0127c7aa 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -15,23 +15,23 @@ else
 obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
 endif
 
-obj-$(CONFIG_ARM64) += arm64-mmu.o
 obj-y += ap.o
 obj-y += board.o board2.o
 obj-y += cache.o
 obj-y += clock.o
-obj-y += lowlevel_init.o
 obj-y += pinmux-common.o
 obj-y += powergate.o
 obj-y += xusb-padctl-dummy.o
-obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
-obj-$(CONFIG_TEGRA_GPU) += gpu.o
-obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+endif
 
+obj-$(CONFIG_ARM64) += arm64-mmu.o
+obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+obj-$(CONFIG_TEGRA_GPU) += gpu.o
+obj-y += lowlevel_init.o
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_ARMV7_PSCI) += psci.o
 endif
-endif
+obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
 
 obj-$(CONFIG_TEGRA20) += tegra20/
 obj-$(CONFIG_TEGRA30) += tegra30/
diff --git a/arch/arm/mach-tegra/tegra186/Makefile b/arch/arm/mach-tegra/tegra186/Makefile
index ce4610d8f809..188b097d2c7f 100644
--- a/arch/arm/mach-tegra/tegra186/Makefile
+++ b/arch/arm/mach-tegra/tegra186/Makefile
@@ -2,7 +2,4 @@
 #
 # SPDX-License-Identifier: GPL-2.0
 
-obj-y += ../arm64-mmu.o
 obj-y += ../board186.o
-obj-y += ../lowlevel_init.o
-obj-$(CONFIG_DISPLAY_CPUINFO) += ../sys_info.o
-- 
2.9.2



More information about the U-Boot mailing list