[U-Boot] [PATCH 1/2] mips: Add MIPSfpga platform support

Zubair Lutfullah Kakakhel Zubair.Kakakhel at imgtec.com
Wed Jul 27 12:51:00 CEST 2016 

MIPSfpga is an FPGA based dev platform.

In a nutshell, its a microAptiv cpu core with lots of Xilinx IP blocks

The FPGA dev board used is the Nexys4DDR board by Digilent.

For more information, check the Readme file in board/imgtec/xilfpga

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
Reviewed-by: Paul Burton <paul.burton at imgtec.com>
---
 arch/mips/Kconfig                | 16 ++++++++++
 board/imgtec/xilfpga/Kconfig     | 15 +++++++++
 board/imgtec/xilfpga/MAINTAINERS |  6 ++++
 board/imgtec/xilfpga/Makefile    |  7 +++++
 board/imgtec/xilfpga/README      | 55 ++++++++++++++++++++++++++++++++
 board/imgtec/xilfpga/xilfpga.c   | 20 ++++++++++++
 configs/imgtec_xilfpga_defconfig | 25 +++++++++++++++
 include/configs/imgtec_xilfpga.h | 68 ++++++++++++++++++++++++++++++++++++++++
 8 files changed, 212 insertions(+)
 create mode 100644 board/imgtec/xilfpga/Kconfig
 create mode 100644 board/imgtec/xilfpga/MAINTAINERS
 create mode 100644 board/imgtec/xilfpga/Makefile
 create mode 100644 board/imgtec/xilfpga/README
 create mode 100644 board/imgtec/xilfpga/xilfpga.c
 create mode 100644 configs/imgtec_xilfpga_defconfig
 create mode 100644 include/configs/imgtec_xilfpga.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 21066f0..c81c9ea 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -73,10 +73,26 @@ config MACH_PIC32
 	select OF_CONTROL
 	select DM
 
+config TARGET_XILFPGA
+	bool "Support Imagination Xilfpga"
+	select OF_CONTROL
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+	select DM_ETH
+	select SUPPORTS_LITTLE_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select SUPPORTS_CPU_MIPS32_R2
+	select MIPS_L1_CACHE_SHIFT_4
+	select SYS_MIPS_CACHE_INIT_RAM_LOAD
+	help
+	  This supports IMGTEC MIPSfpga platform
+
 endchoice
 
 source "board/dbau1x00/Kconfig"
 source "board/imgtec/malta/Kconfig"
+source "board/imgtec/xilfpga/Kconfig"
 source "board/micronas/vct/Kconfig"
 source "board/pb1x00/Kconfig"
 source "board/qemu-mips/Kconfig"
diff --git a/board/imgtec/xilfpga/Kconfig b/board/imgtec/xilfpga/Kconfig
new file mode 100644
index 0000000..b078278
--- /dev/null
+++ b/board/imgtec/xilfpga/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_XILFPGA
+
+config SYS_BOARD
+	default "xilfpga"
+
+config SYS_VENDOR
+	default "imgtec"
+
+config SYS_CONFIG_NAME
+	default "imgtec_xilfpga"
+
+config SYS_TEXT_BASE
+	default 0x80C00000
+
+endif
diff --git a/board/imgtec/xilfpga/MAINTAINERS b/board/imgtec/xilfpga/MAINTAINERS
new file mode 100644
index 0000000..aa04532
--- /dev/null
+++ b/board/imgtec/xilfpga/MAINTAINERS
@@ -0,0 +1,6 @@
+XILFPGA BOARD
+M:	Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
+S:	Maintained
+F:	board/imgtec/xilfpga
+F:	include/configs/xilfpga.h
+F:	configs/imgtec_xilfpga_defconfig
diff --git a/board/imgtec/xilfpga/Makefile b/board/imgtec/xilfpga/Makefile
new file mode 100644
index 0000000..9aaf9ce
--- /dev/null
+++ b/board/imgtec/xilfpga/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016, Imagination Technologies Ltd.
+# Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+obj-y := xilfpga.o
diff --git a/board/imgtec/xilfpga/README b/board/imgtec/xilfpga/README
new file mode 100644
index 0000000..ac19d48
--- /dev/null
+++ b/board/imgtec/xilfpga/README
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel, Zubair.Kakakhel at imgtec.com
+ */
+
+MIPSfpga
+=======================================
+
+MIPSfpga is an FPGA based development platform by Imagination Technologies
+As we are dealing with a MIPS core instantiated on an FPGA, specifications
+are fluid and can be varied in RTL.
+
+The example project provided by IMGTEC runs on the Nexys4DDR board by
+Digilent powered by the ARTIX-7 FPGA by Xilinx. Relevant details about
+the example project and the Nexys4DDR board:
+
+- microAptiv UP core m14Kc
+- 50MHz clock speed
+- 128Mbyte DDR RAM	at 0x0000_0000
+- 8Kbyte RAM		at 0x1000_0000
+- axi_intc		at 0x1020_0000
+- axi_uart16550		at 0x1040_0000
+- axi_gpio		at 0x1060_0000
+- axi_i2c		at 0x10A0_0000
+- custom_gpio		at 0x10C0_0000
+- axi_ethernetlite	at 0x10E0_0000
+- 8Kbyte BootRAM	at 0x1FC0_0000
+- 16Mbyte QPI		at 0x1D00_0000
+
+Boot protocol:
+--------------
+
+The BootRAM is a writeable "RAM" in FPGA at 0x1FC0_0000.
+This is for easy reprogrammibility via JTAG.
+
+DDR initialization is already handled by a HW IP block.
+
+When the example project bitstream is loaded, the cpu_reset button
+needs to be pressed.
+
+The bootram initializes the cache and axi_uart
+Then checks if there is anything non 0xffff_ffff at location 0x1D40_0000
+
+If there is, then that is considered as u-boot. u-boot is copied from
+0x1D40_0000 to memory and the bootram jumps into u-boot code.
+
+At this point, the board is ready to load the Linux kernel + buildroot initramfs
+
+This can be done in multiple ways:
+
+1- JTAG load the binary and jump into it.
+2- Load kernel stored in the QSPI flash at 0x1D80_0000
+3- Load uImage via tftp. Ethernet works in u-boot.
+   e.g. env set server ip 192.168.154.45; dhcp uImage; bootm
diff --git a/board/imgtec/xilfpga/xilfpga.c b/board/imgtec/xilfpga/xilfpga.c
new file mode 100644
index 0000000..9549e23
--- /dev/null
+++ b/board/imgtec/xilfpga/xilfpga.c
@@ -0,0 +1,20 @@
+/*
+ * Imagination Technologies MIPSfpga platform code
+ *
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+
+/* initialize the DDR Controller and PHY */
+phys_size_t initdram(int board_type)
+{
+	/* MIG IP block is smart and doesn't need SW
+	 * to do any init */
+	return 128 * 1024 * 1024;	/* in bytes */
+}
diff --git a/configs/imgtec_xilfpga_defconfig b/configs/imgtec_xilfpga_defconfig
new file mode 100644
index 0000000..63f03cd
--- /dev/null
+++ b/configs/imgtec_xilfpga_defconfig
@@ -0,0 +1,25 @@
+CONFIG_MIPS=y
+CONFIG_SYS_MALLOC_F_LEN=0x600
+CONFIG_TARGET_XILFPGA=y
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="nexys4ddr"
+CONFIG_BOOTDELAY=5
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="MIPSfpga # "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_SAVEENV is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_CLK=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_CMD_DHRYSTONE=y
diff --git a/include/configs/imgtec_xilfpga.h b/include/configs/imgtec_xilfpga.h
new file mode 100644
index 0000000..0a7fe60
--- /dev/null
+++ b/include/configs/imgtec_xilfpga.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2016, Imagination Technologies Ltd.
+ *
+ * Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Imagination Technologies Ltd. MIPSfpga
+ */
+
+#ifndef __XILFPGA_CONFIG_H
+#define __XILFPGA_CONFIG_H
+
+/* BootROM + MIG is pretty smart. DDR and Cache initialized */
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/*--------------------------------------------
+ * CPU configuration
+ */
+/* CPU Timer rate */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	50000000
+
+/* Cache Configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE	CONF_CM_CACHABLE_NONCOHERENT
+
+/*----------------------------------------------------------------------
+ * Memory Layout
+ */
+
+/* SDRAM Configuration (for final code, data, stack, heap) */
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 Mbytes */
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_LOAD_ADDR		0x80500000 /* default load address */
+
+/*----------------------------------------------------------------------
+ * Commands
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+
+/*-------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*------------------------------------------------------------
+ * Console Configuration
+ */
+#define CONFIG_SYS_CBSIZE		1024 /* Console I/O Buffer Size   */
+#define CONFIG_SYS_MAXARGS		16   /* max number of command args*/
+#define CONFIG_BAUDRATE			115200
+
+/* -------------------------------------------------
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE	1
+#define CONFIG_ENV_SIZE		0x4000
+
+/* ---------------------------------------------------------------------
+ * Board boot configuration
+ */
+#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
+
+#endif	/* __XILFPGA_CONFIG_H */
-- 
1.9.1

More information about the U-Boot mailing list