[U-Boot] [RESEND PATCH 1/4] spi: cadence_qspi_apb: Support 32 bit AHB address

[Vignesh R]

AHB address can be as long as 32 bit, hence remove the
CQSPI_REG_INDIRECTRDSTARTADDR mask. Since AHB address is passed from DT
and read as u32 value, it anyway does not make sense to mask upper bits.

Signed-off-by: Vignesh R <vigneshr at ti.com>
Tested-by: Marek Vasut <marex at denx.de>
Acked-by: Marek Vasut <marex at denx.de>
Reviewed-by: Jagan Teki <jteki at openedev.com>
---
 drivers/spi/cadence_qspi_apb.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index a71531d30935..a8cc23f0b6e8 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -45,7 +45,6 @@
 #define CQSPI_INST_TYPE_QUAD			(2)
 
 #define CQSPI_STIG_DATA_LEN_MAX			(8)
-#define CQSPI_INDIRECTTRIGGER_ADDR_MASK		(0xFFFFF)
 
 #define CQSPI_DUMMY_CLKS_PER_BYTE		(8)
 #define CQSPI_DUMMY_BYTES_MAX			(4)
@@ -573,7 +572,7 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
 		addr_bytes = cmdlen - 1;
 
 	/* Setup the indirect trigger address */
-	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
+	writel((u32)plat->ahbbase,
 	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
 
 	/* Configure the opcode */
@@ -714,7 +713,7 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
 		return -EINVAL;
 	}
 	/* Setup the indirect trigger address */
-	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
+	writel((u32)plat->ahbbase,
 	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
 
 	/* Configure the opcode */
-- 
2.9.0