[U-Boot] [PATCH] mmc: sdhci: revert "mmc: sdhci: Claer high speed if not supported"

[Jaehoon Chung]

This "commit 429790026021d522d51617217d4b86218cca5750" is wrong.
SDHCI_QUIRK_NO_HISPD_BIT is for skipping to set CTRL_HISPD bit.

For example, Exynos didn't have CTRL_HISPD. But Highspeed mode
is supported.
(This quirks doesn't mean  that driver didn't support the Highseepd mode.)

Note: If driver didn't support the Highspeed Mode, use or add the other
quirks.

After applied this patch, all Exynos SoCs are just running with 25MHz.

Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
---
 drivers/mmc/sdhci.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 9fdbed8..1fa4038 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -553,9 +553,6 @@ int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
 			cfg->host_caps |= MMC_MODE_8BIT;
 	}
 
-	if (quirks & SDHCI_QUIRK_NO_HISPD_BIT)
-		cfg->host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
-
 	if (host_caps)
 		cfg->host_caps |= host_caps;
 
-- 
1.9.1