[U-Boot] [PATCH v2 2/3] config: ls1012aqds: Add USB EHCI support for ls1012aqds

[Rajesh Bhagat]

Add USB EHCI support for ls1012aqds platform

Signed-off-by: Rajat Srivastava <rajat.srivastava at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
---
Changes in v2: 
 - None

 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |    1 +
 include/configs/ls1012aqds.h                       |    5 +++++
 include/usb/ehci-ci.h                              |    2 +-
 3 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 0c87c2f..b1637da 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -34,6 +34,7 @@
 #define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x01f00000)
 #define CONFIG_SYS_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02000000)
 #define CONFIG_SYS_XHCI_USB3_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_EHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x07600000)
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
 #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index fcf402c..849a0f7 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -117,6 +117,8 @@
 #ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
@@ -127,6 +129,9 @@
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
 #define CONFIG_USB_STORAGE
 #endif
 
diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
index 882aed4..38d557c 100644
--- a/include/usb/ehci-ci.h
+++ b/include/usb/ehci-ci.h
@@ -159,7 +159,7 @@
 #elif defined(CONFIG_MPC512X)
 #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR
 #define CONFIG_SYS_FSL_USB2_ADDR	0
-#elif defined(CONFIG_LS102XA)
+#elif defined(CONFIG_LS102XA) || defined(CONFIG_LS1012A)
 #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_USB2_ADDR        0
 #endif
-- 
1.7.7.4