[U-Boot] [PATCH 7/8] x86: Probe pinctrl driver in cpu_init_r()

[George McCollister]

On Wed, Jun 8, 2016 at 7:07 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
> At present pinctrl driver gets probed in ich6_gpio driver's probe
> routine, which has two issues:
>
>  - Pin's PADs only gets configured when GPIO driver is probed, which
>    is not done by default. This leaves the board in a partially
>    functional state as we must initialize PADs correctly to get
>    perepherals fully working.
>  - The probe routine of pinctrl driver is called multiple times, as
>    normally there are multiple GPIO controllers. It should really
>    be called just once.
>
> Move the call to syscon_get_by_driver_data() from ich6_gpio driver
> to cpu_init_r().
>
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>

Reviewed-by: George McCollister <george.mccollister at gmail.com>
Tested-by: George McCollister <george.mccollister at gmail.com>