[U-Boot] [PATCH 4/4] imx: mx6ulevk: change QSPI PAD DSE to 120ohm

[Fabio Estevam]

On Wed, Jun 15, 2016 at 3:18 AM, Peng Fan <van.freenix at gmail.com> wrote:
> The current pad DSE for QSPI is 60ohm. This setting cause
> too strong drive to clock and data signals. Need to change
> the DSE to 120ohm for better signal quality.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>

Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>