[U-Boot] [PATCH 1/4] mx7dsabresd: Fix LCD_PWR_EN output setting

[Fabio Estevam]

On Wed, Jun 15, 2016 at 3:18 AM, Peng Fan <van.freenix at gmail.com> wrote:
> From: Ye Li <ye.li at nxp.com>
>
> LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect
> D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3
> is actually 1.2V.
>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>

Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>