[U-Boot] [PATCH 1/4] mx7dsabresd: Fix LCD_PWR_EN output setting

[Stefano Babic]

On 15/06/2016 08:18, Peng Fan wrote:
> From: Ye Li <ye.li at nxp.com>
> 
> LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect
> D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3
> is actually 1.2V.
> 
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> ---
>  board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
> index c3062f1..1f4fc03 100644
> --- a/board/freescale/mx7dsabresd/mx7dsabresd.c
> +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
> @@ -171,7 +171,7 @@ static enum qn_level seq[3][2] = {
>  
>  static enum qn_func qn_output[8] = {
>  	qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable,
> -	qn_enable
> +	qn_disable
>  };
>  
>  static void iox74lv_init(void)
> 

Applied to master (bug fix), thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================