[U-Boot] [RFC 4/9] arm: omap-common: add secure rom call API for secure devices

Andreas Dannenberg dannenberg at ti.com
Wed Jun 15 21:26:36 CEST 2016


From: Daniel Allred <d-allred at ti.com>

Adds a generic C-callable API for making secure ROM calls on OMAP and
OMAP-compatible devices. This API provides the important function of
flushing the ROM call arguments to memory from the cache, so that the
secure world will have a coherent view of those arguments. Then is
simply calls the omap_smc_sec routine.

Signed-off-by: Daniel Allred <d-allred at ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg at ti.com>
---
 arch/arm/cpu/armv7/omap-common/Makefile     |  4 +++
 arch/arm/cpu/armv7/omap-common/sec_bridge.c | 47 +++++++++++++++++++++++++++++
 arch/arm/include/asm/omap_common.h          |  4 +++
 3 files changed, 55 insertions(+)
 create mode 100644 arch/arm/cpu/armv7/omap-common/sec_bridge.c

diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 87a7ac0..4fc3926 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -28,6 +28,10 @@ obj-y	+= pipe3-phy.o
 obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
 endif
 
+ifneq ($(CONFIG_TI_SECURE_DEVICE),)
+obj-y   += sec_bridge.o
+endif
+
 ifeq ($(CONFIG_SYS_DCACHE_OFF),)
 obj-y	+= omap-cache.o
 endif
diff --git a/arch/arm/cpu/armv7/omap-common/sec_bridge.c b/arch/arm/cpu/armv7/omap-common/sec_bridge.c
new file mode 100644
index 0000000..4eaba8e
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/sec_bridge.c
@@ -0,0 +1,47 @@
+/*
+ *
+ * Common bridge function to make OMAP secure ROM calls
+ *
+ * (C) Copyright 2016
+ * Texas Instruments, <www.ti.com>
+ *
+ * Daniel Allred    <d-allred at ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <stdarg.h>
+
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+
+static uint32_t secure_rom_call_args[5] __aligned(ARCH_DMA_MINALIGN);
+
+u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...)
+{
+	int i;
+	u32 num_args;
+	va_list ap;
+
+	va_start(ap, flag);
+
+	num_args = va_arg(ap, u32);
+
+	/* Copy args to aligned args structure */
+	for (i = 0; i < num_args; i++)
+		secure_rom_call_args[i + 1] = va_arg(ap, u32);
+
+	secure_rom_call_args[0] = num_args;
+
+	va_end(ap);
+
+	/* if data cache is enabled, flush the aligned args structure */
+#ifndef CONFIG_SYS_DCACHE_OFF
+	flush_dcache_range(
+		(unsigned int)&secure_rom_call_args[0],
+		(unsigned int)&secure_rom_call_args[0] +
+		roundup(sizeof(secure_rom_call_args), ARCH_DMA_MINALIGN));
+#endif
+	return omap_smc_sec(service, proc_id, flag, secure_rom_call_args);
+}
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 5943e6f..cb02c88 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -629,6 +629,10 @@ void omap_smc1(u32 service, u32 val);
 
 u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
 
+#ifdef CONFIG_TI_SECURE_DEVICE
+u32 secure_rom_call(u32 service, u32 proc_id, u32 flag, ...);
+#endif
+
 void enable_edma3_clocks(void);
 void disable_edma3_clocks(void);
 
-- 
2.6.4



More information about the U-Boot mailing list