[U-Boot] [RFC 3/9] arm: omap-common: add secure smc entry

Simon Glass sjg at chromium.org
Fri Jun 17 05:52:36 CEST 2016


On 15 June 2016 at 13:26, Andreas Dannenberg <dannenberg at ti.com> wrote:
> From: Daniel Allred <d-allred at ti.com>
>
> Adds an interface for calling secure ROM APIs across a range of OMAP and
> OMAP compatible devices.
>
> Signed-off-by: Daniel Allred <d-allred at ti.com>
> Signed-off-by: Andreas Dannenberg <dannenberg at ti.com>
> ---
>  arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 47 ++++++++++++++++++++++----
>  arch/arm/include/asm/omap_common.h             |  2 ++
>  2 files changed, 42 insertions(+), 7 deletions(-)

Reviewed-by: Simon Glass <sjg at chromium.org>

But please see below.

>
> diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> index 5283135..2a710ce 100644
> --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> @@ -16,6 +16,8 @@
>  #include <asm/arch/spl.h>
>  #include <linux/linkage.h>
>
> +.arch_extension sec
> +
>  #ifdef CONFIG_SPL
>  ENTRY(save_boot_params)
>
> @@ -26,14 +28,45 @@ ENDPROC(save_boot_params)
>  #endif
>
>  ENTRY(omap_smc1)
> -       PUSH    {r4-r12, lr}    @ save registers - ROM code may pollute
> +       push    {r4-r12, lr}    @ save registers - ROM code may pollute
>                                 @ our registers
> -       MOV     r12, r0         @ Service
> -       MOV     r0, r1          @ Argument
> -       DSB
> -       DMB
> -       .word   0xe1600070      @ SMC #0 - hand assembled for GCC versions
> +       mov     r12, r0         @ Service
> +       mov     r0, r1          @ Argument
> +       dsb
> +       dmb
> +       smc     0               @ SMC #0 to enter monitor mode
>                                 @ call ROM Code API for the service requested
>
> -       POP     {r4-r12, pc}
> +       pop     {r4-r12, pc}
>  ENDPROC(omap_smc1)
> +
> +ENTRY(omap_smc_sec)
> +       push    {r4-r12, lr}    @ save registers - ROM code may pollute
> +
> +       mov     r6, #0xFF       @ Indicate new Task call
> +
> +       mov     r12, #0x00      @ Secure Service ID in R12
> +
> +       dsb
> +       dmb
> +
> +       smc     0               @ SMC #0 to enter monitor mode
> +       b       omap_smc_sec_end /* exit at end of the service execution */
> +       nop
> +
> +       /* In case of IRQ happening in Secure, then ARM will branch here.
> +        * At that moment, IRQ will be pending and ARM will jump to Non Secure
> +        * IRQ handler
> +         */
> +       mov     r12, #0xFE
> +
> +       dsb
> +       dmb
> +
> +       smc     0               @ SMC #0 to enter monitor mode
> +
> +omap_smc_sec_end:
> +       pop     {r4-r12, lr}
> +       bx      lr
> +
> +ENDPROC(omap_smc_sec)
> diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
> index 07f3848..5943e6f 100644
> --- a/arch/arm/include/asm/omap_common.h
> +++ b/arch/arm/include/asm/omap_common.h
> @@ -627,6 +627,8 @@ void recalibrate_iodelay(void);
>
>  void omap_smc1(u32 service, u32 val);
>
> +u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);

Please add function comments

> +
>  void enable_edma3_clocks(void);
>  void disable_edma3_clocks(void);
>
> --
> 2.6.4
>


More information about the U-Boot mailing list