[U-Boot] [PATCH v2] x86: Add Advantech SOM-DB5800/SOM-6867 support

Bin Meng bmeng.cn at gmail.com
Wed Jun 22 02:48:21 CEST 2016


On Wed, Jun 22, 2016 at 1:07 AM, George McCollister
<george.mccollister at gmail.com> wrote:
> Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
> This is very similar to conga-qeval20-qa3-e3845 in that there is a
> reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
> installed.
>
> Currently supported:
>  - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
>    SOM-DB5800.
>  - 4x USB 2.0 (EHCI)
>  - Video
>  - SATA
>  - Ethernet
>  - PCIe
>  - Realtek ALC892 HD Audio
>    Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
>    HDA_SDI0 is set in DT to enable HD Audio codec.
>    Pin defaults for codec pin complexs are not changed.
>
> Not supported:
>  - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
>  - USB 3.0 (XHCI)
>  - TPM
>
> Signed-off-by: George McCollister <george.mccollister at gmail.com>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2:
>  - Disable sdio, sdcard, emmc45-ddr50 in FSP DT
>  - Remove defines CONFIG_MMC, CONFIG_SDHCI, CONFIG_GENERIC_MMC
>    CONFIG_MMC_SDMA from som-db5800-som-6867.h
>  - Disable CONFIG_CMD_MMC in defconfig
>  - Remove unused header includes from som-db5800-som-6867.c
>  - Remove gpio-offset from function mode pinctrl definitions in DT
>
>  arch/x86/Kconfig                                   |   4 +
>  arch/x86/dts/Makefile                              |   3 +-
>  arch/x86/dts/baytrail_som-db5800-som-6867.dts      | 289 +++++++++++++++++++++
>  board/advantech/Kconfig                            |  28 ++
>  board/advantech/som-db5800-som-6867/.gitignore     |   3 +
>  board/advantech/som-db5800-som-6867/Kconfig        |  28 ++
>  board/advantech/som-db5800-som-6867/MAINTAINERS    |   7 +
>  board/advantech/som-db5800-som-6867/Makefile       |   8 +
>  .../som-db5800-som-6867/acpi/mainboard.asl         |  11 +
>  board/advantech/som-db5800-som-6867/dsdt.asl       |  14 +
>  .../som-db5800-som-6867/som-db5800-som-6867.c      |  24 ++
>  board/advantech/som-db5800-som-6867/start.S        |   9 +
>  configs/som-db5800-som-6867_defconfig              |  61 +++++
>  include/configs/som-db5800-som-6867.h              |  36 +++
>  14 files changed, 524 insertions(+), 1 deletion(-)
>  create mode 100644 arch/x86/dts/baytrail_som-db5800-som-6867.dts
>  create mode 100644 board/advantech/Kconfig
>  create mode 100644 board/advantech/som-db5800-som-6867/.gitignore
>  create mode 100644 board/advantech/som-db5800-som-6867/Kconfig
>  create mode 100644 board/advantech/som-db5800-som-6867/MAINTAINERS
>  create mode 100644 board/advantech/som-db5800-som-6867/Makefile
>  create mode 100644 board/advantech/som-db5800-som-6867/acpi/mainboard.asl
>  create mode 100644 board/advantech/som-db5800-som-6867/dsdt.asl
>  create mode 100644 board/advantech/som-db5800-som-6867/som-db5800-som-6867.c
>  create mode 100644 board/advantech/som-db5800-som-6867/start.S
>  create mode 100644 configs/som-db5800-som-6867_defconfig
>  create mode 100644 include/configs/som-db5800-som-6867.h
>

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>


More information about the U-Boot mailing list