[U-Boot] [PATCH v2] x86: Add Advantech SOM-DB5800/SOM-6867 support

Bin Meng bmeng.cn at gmail.com
Wed Jun 22 02:53:29 CEST 2016


On Wed, Jun 22, 2016 at 8:48 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
> On Wed, Jun 22, 2016 at 1:07 AM, George McCollister
> <george.mccollister at gmail.com> wrote:
>> Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
>> This is very similar to conga-qeval20-qa3-e3845 in that there is a
>> reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
>> installed.
>>
>> Currently supported:
>>  - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
>>    SOM-DB5800.
>>  - 4x USB 2.0 (EHCI)
>>  - Video
>>  - SATA
>>  - Ethernet
>>  - PCIe
>>  - Realtek ALC892 HD Audio
>>    Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
>>    HDA_SDI0 is set in DT to enable HD Audio codec.
>>    Pin defaults for codec pin complexs are not changed.
>>
>> Not supported:
>>  - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
>>  - USB 3.0 (XHCI)
>>  - TPM
>>
>> Signed-off-by: George McCollister <george.mccollister at gmail.com>
>> Reviewed-by: Simon Glass <sjg at chromium.org>
>> ---
>>
>> Changes in v2:
>>  - Disable sdio, sdcard, emmc45-ddr50 in FSP DT
>>  - Remove defines CONFIG_MMC, CONFIG_SDHCI, CONFIG_GENERIC_MMC
>>    CONFIG_MMC_SDMA from som-db5800-som-6867.h
>>  - Disable CONFIG_CMD_MMC in defconfig
>>  - Remove unused header includes from som-db5800-som-6867.c
>>  - Remove gpio-offset from function mode pinctrl definitions in DT
>>
>>  arch/x86/Kconfig                                   |   4 +
>>  arch/x86/dts/Makefile                              |   3 +-
>>  arch/x86/dts/baytrail_som-db5800-som-6867.dts      | 289 +++++++++++++++++++++
>>  board/advantech/Kconfig                            |  28 ++
>>  board/advantech/som-db5800-som-6867/.gitignore     |   3 +
>>  board/advantech/som-db5800-som-6867/Kconfig        |  28 ++
>>  board/advantech/som-db5800-som-6867/MAINTAINERS    |   7 +
>>  board/advantech/som-db5800-som-6867/Makefile       |   8 +
>>  .../som-db5800-som-6867/acpi/mainboard.asl         |  11 +
>>  board/advantech/som-db5800-som-6867/dsdt.asl       |  14 +
>>  .../som-db5800-som-6867/som-db5800-som-6867.c      |  24 ++
>>  board/advantech/som-db5800-som-6867/start.S        |   9 +
>>  configs/som-db5800-som-6867_defconfig              |  61 +++++
>>  include/configs/som-db5800-som-6867.h              |  36 +++
>>  14 files changed, 524 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/x86/dts/baytrail_som-db5800-som-6867.dts
>>  create mode 100644 board/advantech/Kconfig
>>  create mode 100644 board/advantech/som-db5800-som-6867/.gitignore
>>  create mode 100644 board/advantech/som-db5800-som-6867/Kconfig
>>  create mode 100644 board/advantech/som-db5800-som-6867/MAINTAINERS
>>  create mode 100644 board/advantech/som-db5800-som-6867/Makefile
>>  create mode 100644 board/advantech/som-db5800-som-6867/acpi/mainboard.asl
>>  create mode 100644 board/advantech/som-db5800-som-6867/dsdt.asl
>>  create mode 100644 board/advantech/som-db5800-som-6867/som-db5800-som-6867.c
>>  create mode 100644 board/advantech/som-db5800-som-6867/start.S
>>  create mode 100644 configs/som-db5800-som-6867_defconfig
>>  create mode 100644 include/configs/som-db5800-som-6867.h
>>
>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>

applied to u-boot-x86/next, thanks!


More information about the U-Boot mailing list