[U-Boot] [PATCH V3] OMAP3: Various: Future-proof serial platdata A few boards still use ns16550_platdata structures, but assume the structure is going to be in a specific order. By explicitly naming each entry, this should also help 'future-proof' in the event the structure changes.
Adam Ford
aford173 at gmail.com
Wed Mar 2 00:15:40 CET 2016
Tested on the Logic PD Torpedo + Wireless.
I only changed a handful of devices that used the same syntax as the Logic
board. Appologies if I missed one or stepped on toes. Thanks to Derald Woods
and Alexander Graf.
Signed-off-by: Adam Ford <aford173 at gmail.com>
V3: Remove reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.
V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
---
board/isee/igep00x0/igep00x0.c | 6 +++---
board/logicpd/omap3som/omap3logic.c | 6 +++---
board/logicpd/zoom1/zoom1.c | 6 +++---
board/overo/overo.c | 6 +++---
board/quipos/cairo/cairo.c | 6 +++---
board/ti/beagle/beagle.c | 6 +++---
board/timll/devkit8000/devkit8000.c | 6 +++---
7 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index e2fce50..d1a6a6f 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -34,9 +34,9 @@ static const u32 gpmc_lan_config[] = {
#endif
static const struct ns16550_platdata igep_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(igep_uart) = {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 668f684..51d2987 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -47,9 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
*/
static const struct ns16550_platdata omap3logic_serial = {
- OMAP34XX_UART1,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART1,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(omap3logic_uart) = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 4040114..982619c 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -44,9 +44,9 @@ static const u32 gpmc_lab_enet[] = {
};
static const struct ns16550_platdata zoom1_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(zoom1_uart) = {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a38b959..40f13e5 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -68,9 +68,9 @@ static struct {
} expansion_config = {0x0};
static const struct ns16550_platdata overo_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(overo_uart) = {
diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
index 21793e8..77e4482 100644
--- a/board/quipos/cairo/cairo.c
+++ b/board/quipos/cairo/cairo.c
@@ -91,9 +91,9 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
#endif
static const struct ns16550_platdata cairo_serial = {
- OMAP34XX_UART2,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART2,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(cairo_uart) = {
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ff317ef..0ed4f52 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -73,9 +73,9 @@ static struct {
} expansion_config;
static const struct ns16550_platdata beagle_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(beagle_uart) = {
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 1a447c7..965252f 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -46,9 +46,9 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
};
static const struct ns16550_platdata devkit8000_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+ .base = OMAP34XX_UART3,
+ .reg_shift = 2,
+ .clock = V_NS16550_CLK
};
U_BOOT_DEVICE(devkit8000_uart) = {
--
1.9.1
More information about the U-Boot
mailing list