March 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Mar 1 00:00:43 CET 2016
Ending: Thu Mar 31 23:12:34 CEST 2016
Messages: 3183

• [U-Boot] [PATCH v2 20/32] dm: usb: Avoid exceeding available array size for storage devices   Marek Vasut
• [U-Boot] [PATCH v2 21/32] dm: usb: Tidy up storage code ready for driver model conversion   Marek Vasut
• [U-Boot] [PATCH v2 25/32] dm: usb: Convert USB storage to use driver-model for block devs   Marek Vasut
• [U-Boot] [PATCH v2 26/32] dm: usb: Unbind old block devices when shutting down USB   Marek Vasut
• [U-Boot] [PATCH 4/9] sandbox: Avoid calling commands when not available   Stephen Warren
• [U-Boot] [PATCH 7/9] Allow command code to compile to nothing   Stephen Warren
• [U-Boot] [PATCH 9/9] Drop various features when the command line is not available   Stephen Warren
• [U-Boot] [PATCH v6 0/2] Enable FIT image to be loaded beyond 32-bit space   York Sun
• [U-Boot] [PATCH v6 1/2] common: image-fit: Use a common function to get address   York Sun
• [U-Boot] [PATCH v6 2/2] common: image-fit: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] [PATCH 9/9] Drop various features when the command line is not available   Tom Rini
• [U-Boot] [PATCH 1/2] boards: ls2080: Fix default bootargs   York Sun
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   York Sun
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Scott Wood
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   york sun
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Scott Wood
• [U-Boot] pull request: u-boot-uniphier/master (2nd round)   Tom Rini
• [U-Boot] [PATCH 01/17] configs: am335x: usb: do not define CONFIG_DM_USB for spl   Tom Rini
• [U-Boot] [PATCH 02/17] am33xx: board: do not register usb devices when CONFIG_DM_USB is defined   Tom Rini
• [U-Boot] [PATCH 04/17] am33xx: board: probe misc drivers to register musb devices   Tom Rini
• [U-Boot] [PATCH 14/17] am33xx: board: init usb ether gadget for rndis support   Tom Rini
• [U-Boot] [PATCH 15/17] am335x_evm: enable usb ether gadget as it supports DM_ETH   Tom Rini
• [U-Boot] [PATCH 16/17] defconfig: am335x_boneblack: enable usb driver model   Tom Rini
• [U-Boot] [PATCH 17/17] defconfig: am335x_gp_evm: enable usb driver model   Tom Rini
• [U-Boot] [PATCH] arm: Add support for LEGO MINDSTORMS EV3   Tom Rini
• [U-Boot] [PATCH] ARM: DRA7xx: Enable NFS boot command   Tom Rini
• [U-Boot] [PATCH] spl_mmc: allow to load raw image   Tom Rini
• [U-Boot] [PATCH] spl_nor: fix warning when compiled for 64bit target   Tom Rini
• [U-Boot] ARM: start.S: fix typo   Tom Rini
• [U-Boot] sniper: Various minor cleanups, missing Kconfig configs and reorganisation   Tom Rini
• [U-Boot] arm: dra7xx: Define Android partition table   Tom Rini
• [U-Boot] compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6   Tom Rini
• [U-Boot] amcc-common.h: Disable CONFIG_SYS_LONGHELP   Tom Rini
• [U-Boot] [PATCH] mtd: denali: fix warning when compiled for 64bit system   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.03-rc3 released   Tom Rini
• [U-Boot] [PATCH 12/12] x86: Document how to play with SeaBIOS   Simon Glass
• [U-Boot] placement for new clock drivers   Simon Glass
• [U-Boot] U-Boot as first bootloader on Exynos platforms   Simon Glass
• [U-Boot] [PATCH v2 01/12] net: designware: support phy reset device-tree bindings   Simon Glass
• [U-Boot] [PATCH v2 03/12] net: designware: Add a fix_mac_speed hook   Simon Glass
• [U-Boot] [PATCH v2 04/12] rockchip: rk3288: pinctrl: support more pins   Simon Glass
• [U-Boot] [PATCH v2 05/12] rockchip: rk3288: Add clock support for the gmac ethernet interface   Simon Glass
• [U-Boot] [PATCH v2 06/12] rockchip: rk3288: grf: Define GRF_SOC_CON1 and GRF_SOC_CON3   Simon Glass
• [U-Boot] [PATCH v2 07/12] net: gmac_rk3288: Add RK3288 GMAC driver   Simon Glass
• [U-Boot] [PATCH v2 09/12] rockchip: rock2: dts: use status = "okay" not ok   Simon Glass
• [U-Boot] [PATCH v2 10/12] rockchip: Enable networking support on rock2 and firefly   Simon Glass
• [U-Boot] [PATCH] RFC: rockchip: video: Lower hpd wait time   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: correct sdram setting   Simon Glass
• [U-Boot] [PATCH v2 1/3] x86: Support booting SeaBIOS   Simon Glass
• [U-Boot] Samsung I2C driver   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: correct sdram setting   Chris Zhong
• [U-Boot] [PATCH 12/12] x86: Document how to play with SeaBIOS   Bin Meng
• [U-Boot] [PATCH] dm: core: make simple-bus compatible to simple-mfd   Masahiro Yamada
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Prabhakar Kushwaha
• [U-Boot] [PATCH] ARM: uniphier: document how-to-build for Ace and Sanji boards   Masahiro Yamada
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Bhupesh Sharma
• [U-Boot] Pull request: u-boot-spi/master   Mugunthan V N
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Mugunthan V N
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   york sun
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Bhupesh Sharma
• [U-Boot] [PATCH] amcc-common.h: Disable CONFIG_SYS_LONGHELP   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI   Chin Liang See
• [U-Boot] Problem with attaching UBI partition   Chin Liang See
• [U-Boot] [PATCH v3 0/3] Make usb device-tree fixup independent of USB controller   Sriram Dash
• [U-Boot] [PATCH v3 1/3] board:freescale:common: Move device-tree fixup framework to common file   Sriram Dash
• [U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v3 3/3] board:freescale:usb: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] Problem with attaching UBI partition   Stefan Roese
• [U-Boot] [ANN] U-Boot v2016.03-rc3 released   Wolfgang Denk
• [U-Boot] [PATCHv2 1/2] power: as3722: Allow using on any i2c bus with any address   Julian Scheel
• [U-Boot] [PATCHv2 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard   Julian Scheel
• [U-Boot] U-Boot as first bootloader on Exynos platforms   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: Use raw SPL by default for mmc1   Alexander Graf
• [U-Boot] [PATCH] ls102xa: dm: serial: Disable CONFIG_DM_STDIO for LCD/HDMI display   Alison Wang
• [U-Boot] Setting ipaddr via setenv() - H_INTERACTIVE vs H_PROGRAMMATIC   Stefan Roese
• [U-Boot] [PATCH] api: Export API structure address as an environment variable   Stanislav Galabov
• [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register   Lukasz Majewski
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Christophe Henri RICARD
• [U-Boot] Problem with attaching UBI partition   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] U-Boot as first bootloader on Exynos platforms   Simon Glass
• [U-Boot] Problem with attaching UBI partition   Jagan Teki
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Jagan Teki
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Christophe Henri RICARD
• [U-Boot] Problem with attaching UBI partition   Chin Liang See
• [U-Boot] Problem with attaching UBI partition   Marek Vasut
• [U-Boot] [PATCH] usb: gadget: composite: Correct recovery path for register   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI   Marek Vasut
• [U-Boot] Problem with attaching UBI partition   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] Problem with attaching UBI partition   Marek Vasut
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Jagan Teki
• [U-Boot] [PATCH v5 0/3] omap3_spi update after testing Jagan Teki v4 series.   Christophe Ricard
• [U-Boot] [PATCH v5 1/3] spi: omap3: Move headers code inside the driver   Christophe Ricard
• [U-Boot] [PATCH v5 2/3] spi: omap3: Make local functions as static   Christophe Ricard
• [U-Boot] [PATCH v5 3/3] spi: omap3: Convert to driver model   Christophe Ricard
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Christophe Henri RICARD
• [U-Boot] Problem with attaching UBI partition   Stefan Roese
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Jagan Teki
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Scott Wood
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Scott Wood
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Christophe Henri RICARD
• [U-Boot] [PATCH v4 0/5] dm: omap3_spi: Convert to driver model   Jagan Teki
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   york sun
• [U-Boot] [PATCHv2 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard   Stephen Warren
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   Scott Wood
• [U-Boot] [PATCH 2/2] boards: ls2080: Disable fdt copying by default   york sun
• [U-Boot] [PATCH v2 01/32] dm: Drop the block_dev_desc_t typedef   Stephen Warren
• [U-Boot] Setting ipaddr via setenv() - H_INTERACTIVE vs H_PROGRAMMATIC   Joe Hershberger
• [U-Boot] [PATCH v3 1/3] board:freescale:common: Move device-tree fixup framework to common file   Marek Vasut
• [U-Boot] placement for new clock drivers   Dinh Nguyen
• [U-Boot] [PATCH v3 3/3] board:freescale:usb: Add device-tree fixup support for xhci controller   Marek Vasut
• [U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH V3] OMAP3: Various: Future-proof serial platdata A few boards still use ns16550_platdata structures, but assume the structure is going to be in a specific order. By explicitly naming each entry, this should also help 'future-proof' in the event the structure changes.   Adam Ford
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Adam Ford
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Alexander Graf
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Adam Ford
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Alexander Graf
• [U-Boot] [PATCH v2 00/25] exynos: video: Convert exynos LCD driver to use driver model   Minkyu Kang
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers   Huan Wang
• [U-Boot] [PATCH 0/3] serial: Fix the error handling for carriage return and line feed   Alison Wang
• [U-Boot] [PATCH 1/3] dm: serial-uclass: Move a carriage return before a line feed   Alison Wang
• [U-Boot] [PATCH 2/3] serial: Move carriage return before line feed for some serial drivers   Alison Wang
• [U-Boot] [PATCH 3/3] dm: serial: Remove duplicated carriage return character   Alison Wang
• [U-Boot] [PATCH 1/3] dm: serial-uclass: Move a carriage return before a line feed   Bin Meng
• [U-Boot] [PATCH 2/3] serial: Move carriage return before line feed for some serial drivers   Bin Meng
• [U-Boot] [PATCH 3/3] dm: serial: Remove duplicated carriage return character   Bin Meng
• [U-Boot] Newbie SPL question for socfpga_sockit   Phil Reid
• [U-Boot] placement for new clock drivers   Simon Glass
• [U-Boot] [PATCH] serial: Move carriage return before line feed for some serial drivers   Huan Wang
• [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01   Ing. Damiano Bolla
• [U-Boot] Setting ipaddr via setenv() - H_INTERACTIVE vs H_PROGRAMMATIC   Stefan Roese
• [U-Boot] Setting ipaddr via setenv() - H_INTERACTIVE vs H_PROGRAMMATIC   Joe Hershberger
• [U-Boot] Setting ipaddr via setenv() - H_INTERACTIVE vs H_PROGRAMMATIC   Stefan Roese
• [U-Boot] [PATCH 00/12] Add SPI and QSPI boot for LS2080A   Yuan Yao
• [U-Boot] [PATCH 01/12] armv8: ls2080aqds: Select QSPI CLK div via SCFG   Yuan Yao
• [U-Boot] [PATCH 02/12] configs: ls2080a_common: Remove duplicate NOR configs   Yuan Yao
• [U-Boot] [PATCH 03/12] configs: ls2080aqds: Disable IFC NOR & QIXIS when QSPI   Yuan Yao
• [U-Boot] [PATCH 04/12] configs: ls2080aqds: Enable QSPI flash support   Yuan Yao
• [U-Boot] [PATCH 05/12] dm: dts: ls2080aqds: Add QSPI dts node   Yuan Yao
• [U-Boot] [PATCH 06/12] armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot   Yuan Yao
• [U-Boot] [PATCH 07/12] configs: ls2080a: Increase load image len in NAND boot   Yuan Yao
• [U-Boot] [PATCH 08/12] ls2080aqds_nand_defconfig: Enable QSPI & its dependence   Yuan Yao
• [U-Boot] [PATCH 09/12] armv8: ls2080aqds: Enable QSPI boot support   Yuan Yao
• [U-Boot] [PATCH 10/12] ls2080aqds: Enable support for boot from QSPI   Yuan Yao
• [U-Boot] [PATCH 11/12] freescale: cmd: qixis: tidy up the duplicated code   Yuan Yao
• [U-Boot] [PATCH 12/12] LS2080QDS: QSPI boot: fix issues.   Yuan Yao
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Adam Ford
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Adam Ford
• [U-Boot] [PATCH V5] ARM: Various: Future-proof serial platdata   Adam Ford
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Michal Simek
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Adam Ford
• [U-Boot] Problem with attaching UBI partition   Chin Liang See
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Michal Simek
• [U-Boot] [PATCH] arm: socfpga: Enabling U-Boot environment support in QSPI   Chin Liang See
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Adam Ford
• [U-Boot] [PATCH] colibri-vf: Disable pull-up configuration in GPIO pin mux   Stefano Babic
• [U-Boot] [PATCH] arm: imx6: Switch DDR3 calibration to wait_for_bit()   Marek Vasut
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] arm: imx6: Switch DDR3 calibration to wait_for_bit()   Stefano Babic
• [U-Boot] [PATCH] arm: imx6: Switch DDR3 calibration to wait_for_bit()   Marek Vasut
• [U-Boot] [PATCH 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard   Thierry Reding
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Alexander Graf
• [U-Boot] [PATCH V5] ARM: Various: Future-proof serial platdata   Alexander Graf
• [U-Boot] [PATCH 06/12] armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot   york sun
• [U-Boot] Sunxi (Allwinner A20) GPIO problems on u-boot 2016.1 and 2016.3-rc3 but not on 2015.10   Hendrik
• [U-Boot] [PATCH 09/12] armv8: ls2080aqds: Enable QSPI boot support   york sun
• [U-Boot] [PATCH 10/12] ls2080aqds: Enable support for boot from QSPI   york sun
• [U-Boot] [PATCH 12/12] LS2080QDS: QSPI boot: fix issues.   york sun
• [U-Boot] [PATCH V5] ARM: Various: Future-proof serial platdata   Vladimir Zapolskiy
• [U-Boot] [PATCH] armv8: ls2080a: update fdt path for fsl-mc node   Stuart Yoder
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH 4/9] sandbox: Avoid calling commands when not available   Simon Glass
• [U-Boot] [PATCH 7/9] Allow command code to compile to nothing   Simon Glass
• [U-Boot] [PATCH 9/9] Drop various features when the command line is not available   Simon Glass
• [U-Boot] [PATCH 9/9] Drop various features when the command line is not available   Tom Rini
• [U-Boot] Setting ipaddr via setenv() - H_INTERACTIVE vs H_PROGRAMMATIC   Joe Hershberger
• [U-Boot] [PATCH 06/12] armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot   Yao Yuan
• [U-Boot] [PATCH 09/12] armv8: ls2080aqds: Enable QSPI boot support   Yao Yuan
• [U-Boot] [PATCH 10/12] ls2080aqds: Enable support for boot from QSPI   Yao Yuan
• [U-Boot] [PATCH 12/12] LS2080QDS: QSPI boot: fix issues.   Yao Yuan
• [U-Boot] [PATCH] armv8: ls2080a: update fdt path for fsl-mc node   Prabhakar Kushwaha
• [U-Boot] [PATCH 02/12] configs: ls2080a_common: Remove duplicate NOR configs   Prabhakar Kushwaha
• [U-Boot] [PATCH 03/12] configs: ls2080aqds: Disable IFC NOR & QIXIS when QSPI   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: ls2080a: update fdt path for fsl-mc node   Stuart Yoder
• [U-Boot] [PATCH 06/12] armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot   Prabhakar Kushwaha
• [U-Boot] [PATCH 03/12] configs: ls2080aqds: Disable IFC NOR & QIXIS when QSPI   Yao Yuan
• [U-Boot] [PATCH 12/12] LS2080QDS: QSPI boot: fix issues.   Prabhakar Kushwaha
• [U-Boot] [PATCH 02/12] configs: ls2080a_common: Remove duplicate NOR configs   Yao Yuan
• [U-Boot] [PATCH 12/12] LS2080QDS: QSPI boot: fix issues.   Yao Yuan
• [U-Boot] [PATCH 0/9] ARM: ARMv7: PSCI: add PSCI v1.0 support   Dongsheng Wang
• [U-Boot] [PATCH 8/9] ARM: ARMv7: PSCI: ls102xa: add psci functions implemention   Dongsheng Wang
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Mugunthan V N
• [U-Boot] [PATCH 0/3] fix for build break with CONFIG_DISK scsi_init()   Mugunthan V N
• [U-Boot] [PATCH 1/3] drivers: block: Kconfig: set default n to CONFIG_DISK   Mugunthan V N
• [U-Boot] [PATCH 2/3] configs: chromebook_link: enable CONFIG_DISK for accessing sata disk drive   Mugunthan V N
• [U-Boot] [PATCH 3/3] cmd: scsi: compile out scsi_init when CONFIG_DISK is defined   Mugunthan V N
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] Newbie SPL question for socfpga_sockit   Phil Reid
• [U-Boot] [PATCH 1/2] imx: mx6sx: move MX6SX to Kconfig entry   Peng Fan
• [U-Boot] [PATCH 2/2] imx: mx7d: move MX7D to Kconfig entry   Peng Fan
• [U-Boot] Sunxi (Allwinner A20) GPIO problems on u-boot 2016.1 and 2016.3-rc3 but not on 2015.10   Hans de Goede
• [U-Boot] [PATCH v3 1/3] board:freescale:common: Move device-tree fixup framework to common file   Sriram Dash
• [U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v3 3/3] board:freescale:usb: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] [PATCH 1/3] lib/crc16.c: Coding-style cleanup   Stefan Roese
• [U-Boot] [PATCH 2/3] lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start value   Stefan Roese
• [U-Boot] [PATCH 3/3] include/crc.h: Remove unreferenced cyg_xxx() prototypes   Stefan Roese
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH v3 1/3] board:freescale:common: Move device-tree fixup framework to common file   Marek Vasut
• [U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH v3 3/3] board:freescale:usb: Add device-tree fixup support for xhci controller   Marek Vasut
• [U-Boot] [PATCH v3 1/3] board:freescale:common: Move device-tree fixup framework to common file   Sriram Dash
• [U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v3 3/3] board:freescale:usb: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] Problem with attaching UBI partition   Stefan Roese
• [U-Boot] Problem with attaching UBI partition   Marek Vasut
• [U-Boot] [PATCH v3 1/3] board:freescale:common: Move device-tree fixup framework to common file   Marek Vasut
• [U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata   Adam Ford
• [U-Boot] [PATCH 1/2] arm: socfpga: Allow boards to define a custom environment size   Stefan Roese
• [U-Boot] [PATCH 2/2] arm: socfpga: sr1500: Misc updates (SPI speed, env location)   Stefan Roese
• [U-Boot] [PATCH 09/12] armv8: ls2080aqds: Enable QSPI boot support   york sun
• [U-Boot] Sunxi (Allwinner A20) GPIO problems on u-boot 2016.1 and 2016.3-rc3 but not on 2015.10   Hendrik
• [U-Boot] [PATCH 4/9] sandbox: Avoid calling commands when not available   Stephen Warren
• [U-Boot] [PATCH 06/12] armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot   york sun
• [U-Boot] [PATCH 1/2] arm: socfpga: Allow boards to define a custom environment size   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: sr1500: Misc updates (SPI speed, env location)   Marek Vasut
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   york sun
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH 1/2] imx: mx6sx: move MX6SX to Kconfig entry   Fabio Estevam
• [U-Boot] [PATCH 2/2] imx: mx7d: move MX7D to Kconfig entry   Fabio Estevam
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH v5 00/30] EFI payload / application support   Alexander Graf
• [U-Boot] [PATCH v5 01/30] thunderx: Calculate TCR dynamically   Alexander Graf
• [U-Boot] [PATCH v5 02/30] arm64: Disable TTBR1 maps in EL1   Alexander Graf
• [U-Boot] [PATCH v5 03/30] arm64: Make full va map code more dynamic   Alexander Graf
• [U-Boot] [PATCH v5 04/30] thunderx: Move mmu table into board file   Alexander Graf
• [U-Boot] [PATCH v5 05/30] zymqmp: Replace home grown mmu code with generic table approach   Alexander Graf
• [U-Boot] [PATCH v5 06/30] tegra: Replace home grown mmu code with generic table approach   Alexander Graf
• [U-Boot] [PATCH v5 07/30] vexpress64: Add MMU tables   Alexander Graf
• [U-Boot] [PATCH v5 08/30] dwmmc: Increase retry timeout   Alexander Graf
• [U-Boot] [PATCH v5 09/30] hikey: Add MMU tables   Alexander Graf
• [U-Boot] [PATCH v5 10/30] arm64: Remove non-full-va map code   Alexander Graf
• [U-Boot] [PATCH v5 11/30] arm64: Only allow dcache disabled in SPL builds   Alexander Graf
• [U-Boot] [PATCH v5 12/30] disk/part.c: Expose list of available block drivers   Alexander Graf
• [U-Boot] [PATCH v5 13/30] include/efi_api.h: Add more detailed API definitions   Alexander Graf
• [U-Boot] [PATCH v5 14/30] efi_loader: Add PE image loader   Alexander Graf
• [U-Boot] [PATCH v5 15/30] efi_loader: Add boot time services   Alexander Graf
• [U-Boot] [PATCH v5 16/30] efi_loader: Add console interface   Alexander Graf
• [U-Boot] [PATCH v5 17/30] efi_loader: Add runtime services   Alexander Graf
• [U-Boot] [PATCH v5 18/30] efi_loader: Add disk interfaces   Alexander Graf
• [U-Boot] [PATCH v5 19/30] efi_loader: Add "bootefi" command   Alexander Graf
• [U-Boot] [PATCH v5 20/30] efi_loader: Implement memory allocation and map   Alexander Graf
• [U-Boot] [PATCH v5 21/30] arm64: Allow exceptions to return   Alexander Graf
• [U-Boot] [PATCH v5 22/30] arm64: Allow EFI payload code to take exceptions   Alexander Graf
• [U-Boot] [PATCH v5 23/30] efi_loader: hook up in build environment   Alexander Graf
• [U-Boot] [PATCH v5 24/30] efi_loader: Add distro boot script for removable media   Alexander Graf
• [U-Boot] [PATCH v5 25/30] efi_loader: Add README section in README.efi   Alexander Graf
• [U-Boot] [PATCH v5 26/30] efi_loader: Add MAINTAINERS entry   Alexander Graf
• [U-Boot] [PATCH v5 27/30] arm64: Replace fdt_name env variables with fdtfile   Alexander Graf
• [U-Boot] [PATCH v5 28/30] arm: Allow EFI payload code to take exceptions   Alexander Graf
• [U-Boot] [PATCH v5 29/30] efi_loader: Call fdt preparation functions   Alexander Graf
• [U-Boot] [PATCH v5 30/30] efi_loader: Pass proper device path in on boot   Alexander Graf
• [U-Boot] OMAP3: am3517_evm: Add BCH8 ECC and UBIFS NAND support   Derald D. Woods
• [U-Boot] [PATCH 1/3] OMAP3: am3517_evm: Use BCH8 ECC for NAND   Derald D. Woods
• [U-Boot] [PATCH 2/3] OMAP3: am3517_evm: Replace JFFS2 with UBI/UBIFS on NAND   Derald D. Woods
• [U-Boot] [PATCH 3/3] OMAP3: am3517_evm: Misc. comment and option cleanup   Derald D. Woods
• [U-Boot] [PATCH] ARM: uniphier: fix build error when CONFIG_CMD_DDRMPHY_DUMP=y   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: uniphier: set input-enable before pin-muxing   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER   Masahiro Yamada
• [U-Boot] U-Boot as first bootloader on Exynos platforms   Paul Kocialkowski
• [U-Boot] [PATCHv3 1/2] power: as3722: Allow using on any i2c bus with any address   Julian Scheel
• [U-Boot] [PATCHv3 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard   Julian Scheel
• [U-Boot] Sunxi (Allwinner A20) GPIO problems on u-boot 2016.1 and 2016.3-rc3 but not on 2015.10   Hans de Goede
• [U-Boot] [PATCH] malloc: handle free() before gd is set   Stephen Warren
• [U-Boot] [PATCH] malloc: handle free() before gd is set   Hans de Goede
• [U-Boot] Problem with attaching UBI partition   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] efi_loader: Reserve 2 additional pages for fdt   Alexander Graf
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] efi_loader: Reserve 2 additional pages for fdt   Leif Lindholm
• [U-Boot] Problem with attaching UBI partition   Marek Vasut
• [U-Boot] Problem with attaching UBI partition   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] Problem with attaching UBI partition   Marek Vasut
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH v2 2/2] warp7: Add initial support   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] warp7: Add initial support   Stefano Babic
• [U-Boot] [PATCH v2 2/2] warp7: Add initial support   Fabio Estevam
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] [PATCH V2 0/6] ARM: keystone2: Miscellaneous fixes   Nishanth Menon
• [U-Boot] [PATCH V2 1/6] ARM: keystone2: Use macro for DSP GEM power domain   Nishanth Menon
• [U-Boot] [PATCH V2 2/6] ARM: keystone2: K2G: power-off DSP during boot   Nishanth Menon
• [U-Boot] [PATCH V2 3/6] ARM: keystone2: Allow for board specific speed definitions   Nishanth Menon
• [U-Boot] [PATCH V2 4/6] ARM: keystone2: K2G: Add support for different arm/device speeds   Nishanth Menon
• [U-Boot] [PATCH V2 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3   Nishanth Menon
• [U-Boot] [PATCH V2 6/6] ARM: keystone2: use detected ddr3a size   Nishanth Menon
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] [PATCH] sunxi: video: Configure only LVDS pins instead of all LCD pins when LVDS interface selected   Lawrence Yu
• [U-Boot] [PATCH] malloc: handle free() before gd is set   Stephen Warren
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] usb: dwc2: disable erroneous overcurrent condition   dinguyen at opensource.altera.com
• [U-Boot] [PATCH V2 5/6] ARM: dts: k2g: Add support for PMMC   Tom Rini
• [U-Boot] usb: dwc2: disable erroneous overcurrent condition   Marek Vasut
• [U-Boot] [PATCHv2] usb: dwc2: disable erroneous overcurrent condition   dinguyen at opensource.altera.com
• [U-Boot] [PATCHv2] usb: dwc2: disable erroneous overcurrent condition   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache   Matthias Schiffer
• [U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request   Anand Moon
• [U-Boot] exynos5: common: Enable CONFIG_USB_ETHER_RTL8152 ethernet support   Anand Moon
• [U-Boot] [PATCH] dm: omap_timer: Fix conversion of address to a pointer   Lokesh Vutla
• [U-Boot] [PATCH] dm: ti_qspi: Fix conversion of address to a pointer   Lokesh Vutla
• [U-Boot] [PATCH] dm: ti_qspi: Fix conversion of address to a pointer   Jagan Teki
• [U-Boot] [PATCH 0/4] ARM: DRA7: emif: Miscellaneous bug fixes   Lokesh Vutla
• [U-Boot] [PATCH 1/4] ARM: DRA7: emif: Fix updating of refresh ctrl shadow   Lokesh Vutla
• [U-Boot] [PATCH 2/4] ARM: DRA7: emif: Fix DDR init sequence during warm reset   Lokesh Vutla
• [U-Boot] [PATCH 3/4] ARM: DRA7: emif: Check for enable bits before updating leveling output   Lokesh Vutla
• [U-Boot] [PATCH 4/4] ARM: DRA7: emif: Enable interleaving for higher address space   Lokesh Vutla
• [U-Boot] [PATCH] ARM: AM57xx: Update EMIF registers   Lokesh Vutla
• [U-Boot] [PATCH 0/6] ARM: DRA7: Add support for RevH evm   Lokesh Vutla
• [U-Boot] [PATCH 1/6] ti: common: dra7: Add standard access for board description EEPROM   Lokesh Vutla
• [U-Boot] [PATCH 2/6] ARM: DRA7: Enable EEPROM support   Lokesh Vutla
• [U-Boot] [PATCH 3/6] ARM: DRA7: Move emif settings to board specific files   Lokesh Vutla
• [U-Boot] [PATCH 4/6] ARM: DRA7: EMIF: Add 4GB DDR settings   Lokesh Vutla
• [U-Boot] [PATCH 5/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB   Lokesh Vutla
• [U-Boot] [PATCH 6/6] ARM: DRA7-evm: Update memory info in banks   Lokesh Vutla
• [U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request   Marek Vasut
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] [PATCH] rockchip: make configure_emmc() empty for Firefly-RK3288   FUKAUMI Naoki
• [U-Boot] [PATCH V2 1/2] malloc: use hidden visibility   Stephen Warren
• [U-Boot] [PATCH V2 2/2] malloc: remove !gd handling   Stephen Warren
• [U-Boot] [PATCH V2 1/2] malloc: use hidden visibility   Tom Rini
• [U-Boot] [PATCH V5] ARM: Various: Future-proof serial platdata   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 1/3] OMAP3: am3517_evm: Use BCH8 ECC for NAND   Tom Rini
• [U-Boot] [PATCH 2/3] OMAP3: am3517_evm: Replace JFFS2 with UBI/UBIFS on NAND   Tom Rini
• [U-Boot] [PATCH 3/3] OMAP3: am3517_evm: Misc. comment and option cleanup   Tom Rini
• [U-Boot] [PATCH V2 2/2] malloc: remove !gd handling   Tom Rini
• [U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request   Anand Moon
• [U-Boot] [PATCH 3/3] OMAP3: am3517_evm: Misc. comment and option cleanup   Derald D. Woods
• [U-Boot] [PATCH V2 1/2] malloc: use hidden visibility   Stephen Warren
• [U-Boot] [PATCH V2 1/2] malloc: use hidden visibility   Tom Rini
• [U-Boot] [PATCH] sandbox: Fix building with LLVM   Tom Rini
• [U-Boot] [PATCH V2 0/2] OMAP3: am3517_evm: Add BCH8 ECC and UBIFS NAND support   Derald D. Woods
• [U-Boot] [PATCH 1/2] OMAP3: am3517_evm: Use BCH8 ECC for NAND   Derald D. Woods
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Derald D. Woods
• [U-Boot] [PATCH v2 00/18] Add support for 96boards Dragonboard410C board   Mateusz Kulikowski
• [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.   Stephen Warren
• [U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request   Marek Vasut
• [U-Boot] [PATCH] malloc: handle free() before gd is set   Hans de Goede
• [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache   Matthias Schiffer
• [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache   Daniel Schwierzeck
• [U-Boot] [PATCH 00/69] x86: Add support for samus   Simon Glass
• [U-Boot] [PATCH 01/69] dm: timer: Correct timer init ordering after relocation   Simon Glass
• [U-Boot] [PATCH 02/69] arm: Add a 64-bit division routine to the private library   Simon Glass
• [U-Boot] [PATCH 03/69] dhry: Correct dhrystone calculation for fast machines   Simon Glass
• [U-Boot] [PATCH 04/69] syscon: Avoid returning a device on failure   Simon Glass
• [U-Boot] [PATCH 05/69] video: Allow simple-panel to be used without regulators   Simon Glass
• [U-Boot] [PATCH 06/69] cpu: Add support for microcode version and CPU ID   Simon Glass
• [U-Boot] [PATCH 07/69] gpio: Add a function to obtain a GPIO vector value   Simon Glass
• [U-Boot] [PATCH 08/69] gpio: Use const where possible   Simon Glass
• [U-Boot] [PATCH 09/69] pci: Add functions to update PCI configuration registers   Simon Glass
• [U-Boot] [PATCH 10/69] pci: Correct a few comments and nits   Simon Glass
• [U-Boot] [PATCH 11/69] input: i8042: Make sure the keyboard is enabled   Simon Glass
• [U-Boot] [PATCH 12/69] malloc_simple: Add a little more debugging   Simon Glass
• [U-Boot] [PATCH 13/69] x86: Allow use of serial soon after relocation   Simon Glass
• [U-Boot] [PATCH 14/69] x86: cpu: Make the vendor table const   Simon Glass
• [U-Boot] [PATCH 15/69] x86: cpu: Add functions to return the family and stepping   Simon Glass
• [U-Boot] [PATCH 16/69] x86: Move cache-as-RAM code into a common location   Simon Glass
• [U-Boot] [PATCH 17/69] x86: Move microcode code to a common location   Simon Glass
• [U-Boot] [PATCH 18/69] x86: Create a common header for Intel register access   Simon Glass
• [U-Boot] [PATCH 19/69] x86: Add the root-complex block to common intel registers   Simon Glass
• [U-Boot] [PATCH 20/69] x86: Move common LPC code to its own place   Simon Glass
• [U-Boot] [PATCH 21/69] x86: Add some more common MSR indexes   Simon Glass
• [U-Boot] [PATCH 22/69] x86: Move common CPU code to its own place   Simon Glass
• [U-Boot] [PATCH 23/69] x86: Rename PORT_RESET to IO_PORT_RESET   Simon Glass
• [U-Boot] [PATCH 24/69] x86: Move Intel Management Engine code to a common place   Simon Glass
• [U-Boot] [PATCH 25/69] x86: ivybridge: Drop sandybridge_early_init()   Simon Glass
• [U-Boot] [PATCH 26/69] x86: Move common PCH code into a common place   Simon Glass
• [U-Boot] [PATCH 27/69] x86: link: Add required GPIO properties   Simon Glass
• [U-Boot] [PATCH 28/69] x86: dts: link: Move SPD info into the memory controller   Simon Glass
• [U-Boot] [PATCH 29/69] x86: dts: link: Add board ID GPIOs   Simon Glass
• [U-Boot] [PATCH 30/69] x86: gpio: Correct GPIO setup ordering   Simon Glass
• [U-Boot] [PATCH 31/69] x86: Add common SDRAM-init code   Simon Glass
• [U-Boot] [PATCH 32/69] x86: ivybridge: Convert to use the common SDRAM code   Simon Glass
• [U-Boot] [PATCH 33/69] x86: dts: Drop memory SPD compatible string   Simon Glass
• [U-Boot] [PATCH 34/69] x86: Add a script to aid code conversion from coreboot   Simon Glass
• [U-Boot] [PATCH 35/69] x86: Correct duplicate POST values   Simon Glass
• [U-Boot] [PATCH 36/69] x86: Add macros to clear and set I/O bits   Simon Glass
• [U-Boot] [PATCH 37/69] x86: Allow I/O functions to use pointers   Simon Glass
• [U-Boot] [PATCH 38/69] x86: Move common MRC Kconfig options to the common file   Simon Glass
• [U-Boot] [PATCH 39/69] x86: Tidy up mp_init to reduce duplication   Simon Glass
• [U-Boot] [PATCH 40/69] x86: Record the CPU details when starting each core   Simon Glass
• [U-Boot] [PATCH 41/69] x86: ivybridge: Show microcode version for each code   Simon Glass
• [U-Boot] [PATCH 42/69] x86: Add comments to the SIPI vector   Simon Glass
• [U-Boot] [PATCH 43/69] x86: Update microcode for secondary CPUs   Simon Glass
• [U-Boot] [PATCH 44/69] x86: link: Add pin configuration to the device tree   Simon Glass
• [U-Boot] [PATCH 45/69] x86: Add an ICH6 pin configuration driver   Simon Glass
• [U-Boot] [PATCH 46/69] x86: gpio: Allow the pinctrl driver to set up the pin config   Simon Glass
• [U-Boot] [PATCH 47/69] x86: Drop all the old pin configuration code   Simon Glass
• [U-Boot] [PATCH 48/69] x86: Add support for running Intel reference code   Simon Glass
• [U-Boot] [PATCH 49/69] x86: dts: Update the pinctrl binding a little   Simon Glass
• [U-Boot] [PATCH 50/69] x86: Add basic support for broadwell   Simon Glass
• [U-Boot] [PATCH 51/69] x86: broadwell: Add a few microcode files   Simon Glass
• [U-Boot] [PATCH 52/69] x86: broadwell: Add a PCH driver   Simon Glass
• [U-Boot] [PATCH 53/69] x86: broadwell: Add a pinctrl driver   Simon Glass
• [U-Boot] [PATCH 54/69] x86: broadwell: Add a SATA driver   Simon Glass
• [U-Boot] [PATCH 55/69] x86: broadwell: Add a northbridge driver   Simon Glass
• [U-Boot] [PATCH 56/69] x86: broadwell: Add an LPC driver   Simon Glass
• [U-Boot] [PATCH 57/69] x86: broadwell: Add reference code support   Simon Glass
• [U-Boot] [PATCH 58/69] x86: broadwell: Add power-control support   Simon Glass
• [U-Boot] [PATCH 59/69] x86: broadwell: Add support for SDRAM setup   Simon Glass
• [U-Boot] [PATCH 60/69] x86: broadwell: Add a GPIO driver   Simon Glass
• [U-Boot] [PATCH 61/69] x86: broadwell: Add support for high-speed I/O lane with ME   Simon Glass
• [U-Boot] [PATCH 62/69] x86: Support a chained-boot development flow   Simon Glass
• [U-Boot] [PATCH 63/69] x86: broadwell: Add video support   Simon Glass
• [U-Boot] [PATCH 64/69] x86: Add a default address for reference code   Simon Glass
• [U-Boot] [PATCH 65/69] x86: Use white on black for the console on chromebooks   Simon Glass
• [U-Boot] [PATCH 66/69] x86: Update README for new developments   Simon Glass
• [U-Boot] [PATCH 67/69] x86: Add a function to set the IOAPIC ID   Simon Glass
• [U-Boot] [PATCH 68/69] x86: Fix a header nit in x86-chromebook.h   Simon Glass
• [U-Boot] [PATCH 69/69] x86: Add support for the samus chromebook   Simon Glass
• [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.   Simon Glass
• [U-Boot] [PATCH V5] ARM: Various: Future-proof serial platdata   Simon Glass
• [U-Boot] [PATCH] sandbox: Fix building with LLVM   Simon Glass
• [U-Boot] [PATCH] rockchip: make configure_emmc() empty for Firefly-RK3288   Simon Glass
• [U-Boot] [PATCH V2 2/2] malloc: remove !gd handling   Simon Glass
• [U-Boot] [PATCH V2 1/2] malloc: use hidden visibility   Simon Glass
• [U-Boot] [PATCH] dm: core: make simple-bus compatible to simple-mfd   Simon Glass
• [U-Boot] [PATCH v6 1/2] common: image-fit: Use a common function to get address   Simon Glass
• [U-Boot] [PATCH v6 2/2] common: image-fit: Fix load and entry addresses in FIT image   Simon Glass
• [U-Boot] [PATCH 1/3] drivers: block: Kconfig: set default n to CONFIG_DISK   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: correct sdram setting   Simon Glass
• [U-Boot] buildman for sandbox   Simon Glass
• [U-Boot] How do I tell buildman to use a /specific/ toolchain?   Simon Glass
• [U-Boot] Weird error message on buildman   Simon Glass
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Simon Glass
• [U-Boot] [PATCH 2/8] patman: Add a missing space in GetMetaDataForList()   Simon Glass
• [U-Boot] [PATCH 3/8] buildman: patman: Fix -H when installed as a symlink   Simon Glass
• [U-Boot] [PATCH 4/8] buildman: Fix up a few code inconsistencies in toolchain.py   Simon Glass
• [U-Boot] [PATCH 5/8] buildman: Allow branch names which conflict with directories   Simon Glass
• [U-Boot] [PATCH 6/8] buildman: Allow the toolchain priority to be specified   Simon Glass
• [U-Boot] [PATCH 7/8] buildman: Allow the toolchain architecture to be specified   Simon Glass
• [U-Boot] [PATCH 8/8] buildman: Add a way to specific a full toolchain prefix   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3288: correct sdram setting   Chris Zhong
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Masahiro Yamada
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Simon Glass
• [U-Boot] [PATCH 09/12] armv8: ls2080aqds: Enable QSPI boot support   Yao Yuan
• [U-Boot] [PATCH v2] rockchip: rk3288: correct sdram setting   Chris Zhong
• [U-Boot] [PATCH 05/69] video: Allow simple-panel to be used without regulators   Anatolij Gustschin
• [U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support   Yuan Yao
• [U-Boot] [PATCH v2 01/11] armv8: ls2080aqds: Select QSPI CLK div via SCFG   Yuan Yao
• [U-Boot] [PATCH v2 02/11] configs: ls2080a_common: Remove duplicate NOR configs   Yuan Yao
• [U-Boot] [PATCH v2 03/11] configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable   Yuan Yao
• [U-Boot] [PATCH v2 04/11] configs: ls2080aqds: Enable QSPI flash support   Yuan Yao
• [U-Boot] [PATCH v2 05/11] dm: dts: ls2080aqds: Add QSPI dts node   Yuan Yao
• [U-Boot] [PATCH v2 06/11] armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot   Yuan Yao
• [U-Boot] [PATCH v2 07/11] configs: ls2080a: Increase load image len in NAND boot   Yuan Yao
• [U-Boot] [PATCH v2 08/11] ls2080aqds_nand_defconfig: Enable QSPI & its dependence   Yuan Yao
• [U-Boot] [PATCH v2 09/11] armv8: ls2080aqds: Enable QSPI boot support   Yuan Yao
• [U-Boot] [PATCH v2 10/11] board/ls2080qds: add the procedure to deply QSPI image.   Yuan Yao
• [U-Boot] [PATCH v2 11/11] freescale: cmd: qixis: tidy up the duplicated code   Yuan Yao
• [U-Boot] [PATCH] ARM: OMAP4+: Allow arch specfic code to use early DM   Lokesh Vutla
• [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache   Matthew Fortune
• [U-Boot] BeagleBone Black: u-boot 2016.03-rc2 worng fdt detection   Matwey V. Kornilov
• [U-Boot] [PATCH] ARM: uniphier: allow debug_ll_init() to do nothing for unknown SoCs   Masahiro Yamada
• [U-Boot] GSoC projects for Minnowboard MAX   Stefan Roese
• [U-Boot] [PATCH] sunxi: fix DCDC2 output in CHIP_defconfig   Maxime Ripard
• [U-Boot] [PATCH] sunxi: chip: enable composite video out   Maxime Ripard
• [U-Boot] [PATCH v2 1/4] drivers: musb-new: fix compilation error for MIPS.   Purna Chandra Mandal
• [U-Boot] [PATCH v2 2/4] gadget: f_mass_storge: fix compilation error for MIPS.   Purna Chandra Mandal
• [U-Boot] [PATCH v2 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Purna Chandra Mandal
• [U-Boot] [PATCH v2 4/4] board: pic32mzda: enable USB-host, USB-storage support.   Purna Chandra Mandal
• [U-Boot] [PATCH] sunxi: fix DCDC2 output in CHIP_defconfig   Siarhei Siamashka
• [U-Boot] [PATCH v2 2/4] gadget: f_mass_storge: fix compilation error for MIPS.   Lukasz Majewski
• [U-Boot] BeagleBone Black: u-boot 2016.03-rc2 worng fdt detection   Robert Nelson
• [U-Boot] BeagleBone Black: u-boot 2016.03-rc2 worng fdt detection   Robert Nelson
• [U-Boot] BeagleBone Black: u-boot 2016.03-rc2 worng fdt detection   Matwey V. Kornilov
• [U-Boot] BeagleBone Black: u-boot 2016.03-rc2 worng fdt detection   Matwey V. Kornilov
• [U-Boot] [PATCH v2 2/4] gadget: f_mass_storge: fix compilation error for MIPS.   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/4] drivers: musb-new: fix compilation error for MIPS.   Daniel Schwierzeck
• [U-Boot] buildman for sandbox   Joe Hershberger
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Masahiro Yamada
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Joe Hershberger
• [U-Boot] [PATCH 2/8] patman: Add a missing space in GetMetaDataForList()   Joe Hershberger
• [U-Boot] [PATCH 3/8] buildman: patman: Fix -H when installed as a symlink   Joe Hershberger
• [U-Boot] [PATCH 4/8] buildman: Fix up a few code inconsistencies in toolchain.py   Joe Hershberger
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   york sun
• [U-Boot] [PATCH 5/8] buildman: Allow branch names which conflict with directories   Joe Hershberger
• [U-Boot] [PATCH 6/8] buildman: Allow the toolchain priority to be specified   Joe Hershberger
• [U-Boot] [PATCH 7/8] buildman: Allow the toolchain architecture to be specified   Joe Hershberger
• [U-Boot] [PATCH 8/8] buildman: Add a way to specific a full toolchain prefix   Joe Hershberger
• [U-Boot] [PATCH 09/12] armv8: ls2080aqds: Enable QSPI boot support   york sun
• [U-Boot] [PATCH v2 03/11] configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable   york sun
• [U-Boot] [PATCH v2 10/11] board/ls2080qds: add the procedure to deply QSPI image.   york sun
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Simon Glass
• [U-Boot] How do I tell buildman to use a /specific/ toolchain?   Simon Glass
• [U-Boot] [PATCH v2] rockchip: rk3288: correct sdram setting   Simon Glass
• [U-Boot] GSoC projects for Minnowboard MAX   Simon Glass
• [U-Boot] [PATCH] armv8/fsl-lsch2: fix sdhc clock frequency value   york sun
• [U-Boot] [PATCH 8/8] buildman: Add a way to specific a full toolchain prefix   Stephen Warren
• [U-Boot] [PATCH][v3] armv8/ls2080ardb: Enable VID support   york sun
• [U-Boot] [PATCH 4/7 v3] pci/layerscape: add support for LUT   york sun
• [U-Boot] [PATCH] ARM: OMAP4+: Allow arch specfic code to use early DM   Tom Rini
• [U-Boot] [PATCH 1/4] ARM: DRA7: emif: Fix updating of refresh ctrl shadow   Tom Rini
• [U-Boot] [PATCH 2/4] ARM: DRA7: emif: Fix DDR init sequence during warm reset   Tom Rini
• [U-Boot] [PATCH 3/4] ARM: DRA7: emif: Check for enable bits before updating leveling output   Tom Rini
• [U-Boot] [PATCH 4/4] ARM: DRA7: emif: Enable interleaving for higher address space   Tom Rini
• [U-Boot] [PATCH] ARM: AM57xx: Update EMIF registers   Tom Rini
• [U-Boot] [PATCH 0/4] ARM: DRA7: emif: Miscellaneous bug fixes   Tom Rini
• [U-Boot] [PATCH 1/6] ti: common: dra7: Add standard access for board description EEPROM   Tom Rini
• [U-Boot] [PATCH 2/6] ARM: DRA7: Enable EEPROM support   Tom Rini
• [U-Boot] [PATCH 3/6] ARM: DRA7: Move emif settings to board specific files   Tom Rini
• [U-Boot] [PATCH 4/6] ARM: DRA7: EMIF: Add 4GB DDR settings   Tom Rini
• [U-Boot] [PATCH 5/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB   Tom Rini
• [U-Boot] [PATCH 6/6] ARM: DRA7-evm: Update memory info in banks   Tom Rini
• [U-Boot] [PATCH 1/2] OMAP3: am3517_evm: Use BCH8 ECC for NAND   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Tom Rini
• [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.   Tom Rini
• [U-Boot] [PATCH V2 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3   Tom Rini
• [U-Boot] [PATCH] dm: omap_timer: Fix conversion of address to a pointer   Tom Rini
• [U-Boot] [PATCH] dm: ti_qspi: Fix conversion of address to a pointer   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Adam Ford
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Derald D. Woods
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Adam Ford
• [U-Boot] [PATCH v2] rockchip: rk3288: correct sdram setting   Chris Zhong
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Derald D. Woods
• [U-Boot] [PATCH 1/2][v2] driver: net: ldpaa_eth: Add support of PHY framework   Prabhakar Kushwaha
• [U-Boot] [PATCH V6] ARM: Various: Future-proof serial platdata   Adam Ford
• [U-Boot] [PATCH 1/1] am33xx: Update serial platdata to update reg_offset to 0   Adam Ford
• [U-Boot] [PATCH] ARM: AM57xx: Update EMIF registers   Lokesh Vutla
• [U-Boot] [PATCH 0/4] ARM: DRA7: emif: Miscellaneous bug fixes   Lokesh Vutla
• [U-Boot] [PATCH 5/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB   Lokesh Vutla
• [U-Boot] [PATCH v2] ARM: AM57xx: Update EMIF registers   Lokesh Vutla
• [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm   Lokesh Vutla
• [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM   Lokesh Vutla
• [U-Boot] [PATCH v2 2/6] ARM: DRA7: Enable EEPROM support   Lokesh Vutla
• [U-Boot] [PATCH v2 3/6] ARM: DRA7: Move emif settings to board specific files   Lokesh Vutla
• [U-Boot] [PATCH v2 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB   Lokesh Vutla
• [U-Boot] [PATCH v2 5/6] ARM: DRA7: EMIF: Add 4GB DDR settings   Lokesh Vutla
• [U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks   Lokesh Vutla
• [U-Boot] [PATCH] arm: ls102xa: Enable CONFIG_SYS_CONSOLE_IS_IN_ENV support   Alison Wang
• [U-Boot] [PATCH] ARM: DRA72-evm: Update mux and VIRTUAL/MANUAL mode timings   Lokesh Vutla
• [U-Boot] [PATCH 1/2] driver/ddr/fsl: add command/address parity for DDR4 UDIMM   Shengzhou Liu
• [U-Boot] [PATCH 2/2] driver/ddr/fsl: Add workaround for erratum A-009803   Shengzhou Liu
• [U-Boot] [PATCH 1/3] drivers: block: Kconfig: set default n to CONFIG_DISK   Mugunthan V N
• [U-Boot] [PATCH V6] ARM: Various: Future-proof serial platdata   Mugunthan V N
• [U-Boot] [PATCH] dm: ti_qspi: Fix conversion of address to a pointer   Mugunthan V N
• [U-Boot] [PATCH 1/3] vid: Return to default channel of the i2c multiplexer   Wenbin Song
• [U-Boot] [PATCH 2/3] armv8/ls1043aqds: Return the default chennel   Wenbin Song
• [U-Boot] [PATCH 3/3] armv8/ls1043aqds: Add SYS_EEPROM support   Wenbin Song
• [U-Boot] [v2] armv8: fsl-layerscape: Updating entries in Serdes Table   Pratiyush Mohan Srivastava
• [U-Boot] [PATCH] debug_uart: output CR along with LF   Masahiro Yamada
• [U-Boot] [PATCH] debug_uart: output CR along with LF   Stefan Roese
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01   Hans de Goede
• [U-Boot] [PATCH] arm64: define _image_binary_end to fix SPL_OF_CONTROL   Masahiro Yamada
• [U-Boot] [PATCH] spl: add a new stub spl_early_board_init() for early SoC-specific setup   Masahiro Yamada
• [U-Boot] [PATCH 0/6] arm: am57xx: Add Fastboot support to AM57XX EVM   Semen Protsenko
• [U-Boot] [PATCH 1/6] arm: am57xx: Enable USB gadget in AM57XX   Semen Protsenko
• [U-Boot] [PATCH 2/6] arm: am57xx: Enable Fastboot   Semen Protsenko
• [U-Boot] [PATCH 3/6] arm: am57xx: Define Android partition table   Semen Protsenko
• [U-Boot] [PATCH 4/6] arm: am57xx: Set serial# variable   Semen Protsenko
• [U-Boot] [PATCH 5/6] arm: am57xx: Enable 8-bit eMMC access on AM57XX EVM   Semen Protsenko
• [U-Boot] [PATCH 6/6] arm: am57xx: Keep environment in eMMC   Semen Protsenko
• [U-Boot] [PATCH 6/6] arm: am57xx: Keep environment in eMMC   Lokesh Vutla
• [U-Boot] [PATCH 0/4] ARM: DRA7: emif: Miscellaneous bug fixes   Tom Rini
• [U-Boot] [PATCH 1/6] arm: am57xx: Enable USB gadget in AM57XX   Lokesh Vutla
• [U-Boot] [PATCH 2/6] arm: am57xx: Enable Fastboot   Lokesh Vutla
• [U-Boot] [PATCH 5/6] arm: am57xx: Enable 8-bit eMMC access on AM57XX EVM   Lokesh Vutla
• [U-Boot] [PATCH 0/6] arm: am57xx: Add Fastboot support to AM57XX EVM   Tom Rini
• [U-Boot] [PATCH 2/6] arm: am57xx: Enable Fastboot   Tom Rini
• [U-Boot] [PATCH 4/7 v3] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [PATCH 3/6] arm: am57xx: Define Android partition table   Tom Rini
• [U-Boot] [PATCH 4/6] arm: am57xx: Set serial# variable   Tom Rini
• [U-Boot] [PATCH 5/6] arm: am57xx: Enable 8-bit eMMC access on AM57XX EVM   Tom Rini
• [U-Boot] [PATCH 0/7 v4] support mapping PCI device ids to stream ids for MSIs   Stuart Yoder
• [U-Boot] [PATCH 1/7 v4] armv8: ls2080a: remove obsolete stream ID partitioning support   Stuart Yoder
• [U-Boot] [PATCH 3/7 v4] pci: make pci_get_hose_head() available to external users   Stuart Yoder
• [U-Boot] [PATCH 4/7 v4] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [PATCH 5/7 v4] pci/layerscape: add stream ID allocator   Stuart Yoder
• [U-Boot] [PATCH 6/7 v4] pci/layerscape: fdt: function to set msi-map entries   Stuart Yoder
• [U-Boot] [PATCH 7/7 v4] pci/layerscape: set LUT and msi-map for discovered PCI devices   Stuart Yoder
• [U-Boot] [PATCH] ARM: DRA72-evm: Update mux and VIRTUAL/MANUAL mode timings   Tom Rini
• [U-Boot] [PATCH] ARM: uniphier: document how-to-build for Ace and Sanji boards   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: fix build error when CONFIG_CMD_DDRMPHY_DUMP=y   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: uniphier: set input-enable before pin-muxing   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: allow debug_ll_init() to do nothing for unknown SoCs   Masahiro Yamada
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Stefan Roese
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
• [U-Boot] [PATCH 4/7 v4] pci/layerscape: add support for LUT   york sun
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Stefan Roese
• [U-Boot] rockchip: make configure_emmc() empty for Firefly-RK3288   Vagrant Cascadian
• [U-Boot] [PATCH 1/2] driver/ddr/fsl: add command/address parity for DDR4 UDIMM   york sun
• [U-Boot] [PATCH 2/2] driver/ddr/fsl: Add workaround for erratum A-009803   york sun
• [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up   Scott Wood
• [U-Boot] [PATCH 4/7 v4] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [PATCH 4/7 v4] pci/layerscape: add support for LUT   york sun
• [U-Boot] [PATCH 4/7 v4] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [PATCH] ARM: DRA72-evm: Update mux and VIRTUAL/MANUAL mode timings   Tom Rini
• [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH 1/7 v5] armv8: ls2080a: remove obsolete stream ID partitioning support   Stuart Yoder
• [U-Boot] [PATCH 2/7 v5] armv8: ls2080a: update stream ID partitioning info   Stuart Yoder
• [U-Boot] [PATCH 4/7 v5] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [PATCH 6/7 v5] pci/layerscape: fdt: function to set msi-map entries   Stuart Yoder
• [U-Boot] [PATCH] sunxi: fix DCDC2 output in CHIP_defconfig   Maxime Ripard
• [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards   Akshay Bhat
• [U-Boot] [PATCH] spl: add a new stub spl_early_board_init() for early SoC-specific setup   Tom Rini
• [U-Boot] [PATCH] arm64: define _image_binary_end to fix SPL_OF_CONTROL   Tom Rini
• [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards   Fabio Estevam
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
• [U-Boot] [PATCH V6] ARM: Various: Future-proof serial platdata   Simon Glass
• [U-Boot] [PATCH] debug_uart: output CR along with LF   Simon Glass
• [U-Boot] [PATCH] spl: add a new stub spl_early_board_init() for early SoC-specific setup   Simon Glass
• [U-Boot] [PATCH] serial: pl01x: Add support for devices with the rate pre-configured.   Simon Glass
• [U-Boot] [U-Boot,1/2] OMAP3: am3517_evm: Use BCH8 ECC for NAND   Tom Rini
• [U-Boot] [U-Boot, 2/2] OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support   Tom Rini
• [U-Boot] api: Export API structure address as an environment variable   Tom Rini
• [U-Boot] omap3: Use raw SPL by default for mmc1   Tom Rini
• [U-Boot] sandbox: Fix building with LLVM   Tom Rini
• [U-Boot] [U-Boot,V2,1/2] malloc: use hidden visibility   Tom Rini
• [U-Boot] [U-Boot,V2,2/2] malloc: remove !gd handling   Tom Rini
• [U-Boot] buildman for sandbox   Tom Rini
• [U-Boot] [PATCH 02/69] arm: Add a 64-bit division routine to the private library   Tom Rini
• [U-Boot] [PATCH 1/3] lib/crc16.c: Coding-style cleanup   Tom Rini
• [U-Boot] [PATCH 2/3] lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start value   Tom Rini
• [U-Boot] [PATCH 3/3] include/crc.h: Remove unreferenced cyg_xxx() prototypes   Tom Rini
• [U-Boot] Newbie SPL question for socfpga_sockit   Phil Reid
• [U-Boot] [PATCH 1/2] defconfig: ls1021aqds_sdcard_qspi: Enable SPI-NOR   Alison Wang
• [U-Boot] [PATCH 2/2] defconfig: ls1021atwr_sdcard_qspi: Enable CONFIG_MTD   Alison Wang
• [U-Boot] [RFC] armv8: layerscape: Add support of u-boot device tree fix-up   Prabhakar Kushwaha
• [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards   Yangbo Lu
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Huan Wang
• [U-Boot] [PATCH v2 1/3] freescale: vid: Return i2c mux to default channel   Wenbin Song
• [U-Boot] [PATCH v2 2/3] armv8/ls1043aqds: Return i2c mux to default chennel   Wenbin Song
• [U-Boot] [PATCH v2 3/3] armv8/ls1043aqds: Enable ID_EEPROM support for ls1043aqds   Wenbin Song
• [U-Boot] [PATCH 0/3] imx6ul: convert to enable pinctrl/DM POWER   Peng Fan
• [U-Boot] [PATCH 1/3] imx: imx6ul: Introduce device tree files   Peng Fan
• [U-Boot] [PATCH 2/3] imx: mx6ul_evk: default enable device tree support   Peng Fan
• [U-Boot] [PATCH 3/3] imx: mx6ul_evk: convert to use Driver model for power and i2c   Peng Fan
• [U-Boot] [PATCH 1/3] armv8/ls1043aqds: fix fman ucode address to an offset in QSPI flash   Gong Qianyu
• [U-Boot] [PATCH 2/3] deconfig: ls1043ardb_SECURE_BOOT: fix line format   Gong Qianyu
• [U-Boot] [PATCH 3/3] armv8/ls1043a: move CONFIG_MTD to defconfig   Gong Qianyu
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Qianyu Gong
• [U-Boot] [PATCH 1/3] video: ipu: avoid overflow issue   Peng Fan
• [U-Boot] [PATCH 2/3] imx: mx6: correct IPU clock   Peng Fan
• [U-Boot] [PATCH 3/3] imx: mx6: hdmi: handle overflow condition   Peng Fan
• [U-Boot] [PATCH] imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask   Peng Fan
• [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards   Stefano Babic
• [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards   Stefano Babic
• [U-Boot] [PATCH 1/3] imx: mx6ul: skip setting ahb rate   Peng Fan
• [U-Boot] [PATCH 2/3] imx: mx6ul configure the PMIC_STBY_REQ pin as open drain   Peng Fan
• [U-Boot] [PATCH 3/3] imx: print ARM clock for clocks command   Peng Fan
• [U-Boot] [PATCH V2 0/3] imx6ul: convert to enable pinctrl/DM POWER   Peng Fan
• [U-Boot] [PATCH V2 1/3] imx: imx6ul: Introduce device tree files   Peng Fan
• [U-Boot] [PATCH V2 2/3] imx: mx6ul_evk: default enable device tree support   Peng Fan
• [U-Boot] [PATCH V2 3/3] imx: mx6ul_evk: convert to use Driver model for power and i2c   Peng Fan
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask   Peng Fan
• [U-Boot] [PATCH] imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask   Stefano Babic
• [U-Boot] [PATCH] spl: add a new stub spl_early_board_init() for early SoC-specific setup   Masahiro Yamada
• [U-Boot] [PATCH] spl: add a new stub spl_early_board_init() for early SoC-specific setup   Masahiro Yamada
• [U-Boot] [PATCH 00/10] ti: configs: Misc updates for config files   Lokesh Vutla
• [U-Boot] [PATCH 01/10] ti_armv7_keystone2: configs: add usb mass storage support   Lokesh Vutla
• [U-Boot] [PATCH 02/10] ti_armv7_keystone2: env: Update UBIFS image paths   Lokesh Vutla
• [U-Boot] [PATCH 03/10] ti_armv7_keystone2: env: Remove securedb.key.bin load   Lokesh Vutla
• [U-Boot] [PATCH 04/10] am335x: configs: Fix usb ether boot support   Lokesh Vutla
• [U-Boot] [PATCH 05/10] am43xx: configs: Enable USB commands for non usb boot also   Lokesh Vutla
• [U-Boot] [PATCH 06/10] ti_armv7_common: env: Consolidate support for loading script and text env files   Lokesh Vutla
• [U-Boot] [PATCH 07/10] k2g: env: Allow use of a script and plain text env files   Lokesh Vutla
• [U-Boot] [PATCH 08/10] k2g: configs: Add support to save env in MMC   Lokesh Vutla
• [U-Boot] [PATCH 09/10] keystone2: env: add env script for booting with an initramfs with firmware   Lokesh Vutla
• [U-Boot] [PATCH 10/10] keystone2: env: Set mmc as default boot for k2g-evm   Lokesh Vutla
• [U-Boot] [PATCH] MIPS: pic32mzdask: use CONFIG_USE_PRIVATE_LIBGCC=y   Daniel Schwierzeck
• [U-Boot] [PATCH 0/6] arm: am57xx: Add Fastboot support to AM57XX EVM   Sam Protsenko
• [U-Boot] [PATCH] MIPS: pic32mzdask: use CONFIG_USE_PRIVATE_LIBGCC=y   Purna Chandra Mandal
• [U-Boot] [PATCH 6/6] arm: am57xx: Keep environment in eMMC   Sam Protsenko
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Rajat Srivastava
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Marek Vasut
• [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards   Stefano Babic
• [U-Boot] [PATCH 1/2] mx7_common: Remove unexisting options   Stefano Babic
• [U-Boot] [PATCH 2/3] imx: mx6ul_evk: default enable device tree support   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx7dsabresd: Define serial port locally   Stefano Babic
• [U-Boot] [PATCH] mx7: Distinguish between dual and solo versions   Stefano Babic
• [U-Boot] [PATCH] ARM: DRA7: DDR: Enable SR in Power Management Control   Lokesh Vutla
• [U-Boot] Eeprom Configuration   Guy Thouret
• [U-Boot] [PATCH 0/6] arm: am57xx: Add Fastboot support to AM57XX EVM   Tom Rini
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Hans de Goede
• [U-Boot] [PATCH 6/6] arm: am57xx: Keep environment in eMMC   Tom Rini
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Rajesh Bhagat
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Marek Vasut
• [U-Boot] hab_status & CONFIG_SECURE_BOOT - query   C Supriya
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Marek Vasut
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards   Akshay Bhat
• [U-Boot] [RESEND PATCH 1/7 v5] armv8: ls2080a: remove obsolete stream ID partitioning support   Stuart Yoder
• [U-Boot] [RESEND PATCH 2/7 v5] armv8: ls2080a: update stream ID partitioning info   Stuart Yoder
• [U-Boot] [RESEND PATCH 4/7 v5] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [RESEND PATCH 5/7 v5] pci/layerscape: add stream ID allocator   Stuart Yoder
• [U-Boot] [RESEND PATCH 6/7 v5] pci/layerscape: fdt: function to set msi-map entries   Stuart Yoder
• [U-Boot] [RESEND PATCH 7/7 v5] pci/layerscape: set LUT and msi-map for discovered PCI devices   Stuart Yoder
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Stefan Roese
• [U-Boot] [PATCH 1/3] armv8/ls1043aqds: fix fman ucode address to an offset in QSPI flash   york sun
• [U-Boot] [PATCH 1/2] defconfig: ls1021aqds_sdcard_qspi: Enable SPI-NOR   york sun
• [U-Boot] armv8: fsl-layerscape: Updating entries in Serdes Table   york sun
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
• [U-Boot] [PATCH v4 04/14] SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb   york sun
• [U-Boot] buildman for sandbox   Simon Glass
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Simon Glass
• [U-Boot] [RESEND PATCH 4/7 v5] pci/layerscape: add support for LUT   york sun
• [U-Boot] buildman for sandbox   Tom Rini
• [U-Boot] [PATCH v2 1/2] fastboot: sparse: fix block addressing for don't care chunk type   Maxime Ripard
• [U-Boot] [PATCH v2 2/2] fastboot: sparse: remove unnecessary logging   Maxime Ripard
• [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01   Simon Glass
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Simon Glass
• [U-Boot] Ethernet not found on Arria 5.   Dinh Nguyen
• [U-Boot] [PATCH 1/2] sunxi: A23: Fix some revisions needing a different magic sram poke   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Add defconfig and dts for colorfly e708 q1 tablet   Hans de Goede
• [U-Boot] [PATCH v5 24/30] efi_loader: Add distro boot script for removable media   Alexander Graf
• [U-Boot] [RESEND PATCH 4/7 v5] pci/layerscape: add support for LUT   Stuart Yoder
• [U-Boot] [PATCH 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas Manocha
• [U-Boot] [PATCH 2/2] stm32f746-disco: enable flash support   Vikas Manocha
• [U-Boot] [PATCH v5 24/30] efi_loader: Add distro boot script for removable media   Tom Rini
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas Manocha
• [U-Boot] [RESEND 2/2] stm32f746-disco: enable flash support   Vikas Manocha
• [U-Boot] [PATCH v6 24/30] efi_loader: Add distro boot script for removable media   Alexander Graf
• [U-Boot] [PATCH v6 19/30] efi_loader: Add "bootefi" command   Alexander Graf
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] [PATCH 2/3] imx: mx6ul_evk: default enable device tree support   Peng Fan
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Jagan Teki
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas MANOCHA
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Rajesh Bhagat
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   jteki at openedev.com
• [U-Boot] [PATCH] armv8/fsl-lsch2: fix sdhc clock frequency value   Yangbo Lu
• [U-Boot] [PATCH 1/2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   Peng Fan
• [U-Boot] [PATCH 2/2] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH 1/2 v2] driver/ddr/fsl: Add address parity support for DDR4 UDIMM/discrete   Shengzhou Liu
• [U-Boot] [PATCH 2/2 v2] driver/ddr/fsl: Add workaround for erratum A-009803   Shengzhou Liu
• [U-Boot] [PATCH v2 1/4] drivers: musb-new: fix compilation error for MIPS.   Purna Chandra Mandal
• [U-Boot] [PATCH] ARM: DRA7: DDR: Enable SR in Power Management Control   Tom Rini
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] Possible using U-boot to load FreeRTOS and How ?   Bertrand MERCIER
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] [PATCH v2] exynos: Set CNTFRQ   Alexander Graf
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Jagan Teki
• [U-Boot] Ethernet not found on Arria 5.   Dinh Nguyen
• [U-Boot] [PATCH v2] rockchip: rk3288: correct sdram setting   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3036: change ddr frequency to 400M   Simon Glass
• [U-Boot] rockchip: make configure_emmc() empty for Firefly-RK3288   Simon Glass
• [U-Boot] [PATCH v2] rockchip: rk3288: correct sdram setting   Simon Glass
• [U-Boot] Please pull u-boot-rockchip   Simon Glass
• [U-Boot] [PATCH 0/6] usb: Reduce USB scanning time   Stefan Roese
• [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stefan Roese
• [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH 3/6] usb: Remove 1 second per port timeout in usb_hub_configure()   Stefan Roese
• [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally)   Stefan Roese
• [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time   Stefan Roese
• [U-Boot] [PATCH 6/6] usb: Implement static USB port configuration to speed up USB scanning   Stefan Roese
• [U-Boot] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] Invalid Certificate using imx28 and HAB   Per Smitt
• [U-Boot] [PATCH v2] exynos: Set CNTFRQ   york sun
• [U-Boot] [PATCH v2] exynos: Set CNTFRQ   york sun
• [U-Boot] [PATCH 0/5 v6] support mapping PCI device ids to stream ids for MSIs   Stuart Yoder
• [U-Boot] [PATCH 1/5 v6] armv8: ls2080a: remove obsolete stream ID partitioning support   Stuart Yoder
• [U-Boot] [PATCH 2/5 v6] armv8: ls2080a: update stream ID partitioning info   Stuart Yoder
• [U-Boot] [PATCH 3/5 v6] pci: make pci_get_hose_head() available to external users   Stuart Yoder
• [U-Boot] [PATCH 4/5 v6] pci/layerscape: add defines for LUT   Stuart Yoder
• [U-Boot] [PATCH 5/5 v6] pci/layerscape: set LUT and msi-map for discovered PCI devices   Stuart Yoder
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas MANOCHA
• [U-Boot] [PATCH v3] arm: use common instructions applicable to armv7m & other arm archs   Vikas MANOCHA
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Jagan Teki
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas MANOCHA
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Jagan Teki
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas MANOCHA
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Jagan Teki
• [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling   Hans de Goede
• [U-Boot] [PATCH 1/2] defconfig: ls1021aqds_sdcard_qspi: Enable SPI-NOR   Jagan Teki
• [U-Boot] [PATCH 1/2] defconfig: ls1021aqds_sdcard_qspi: Enable SPI-NOR   Jagan Teki
• [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Hans de Goede
• [U-Boot] [PATCH 3/6] usb: Remove 1 second per port timeout in usb_hub_configure()   Hans de Goede
• [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally)   Hans de Goede
• [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time   Hans de Goede
• [U-Boot] [PATCH 6/6] usb: Implement static USB port configuration to speed up USB scanning   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for Difrence DIT4350 tablet   Hans de Goede
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [PATCH 2/4] mtd: fix compiler warnings   Steve Rae
• [U-Boot] [PATCH 3/4] arm: bcm: enable MTD support   Steve Rae
• [U-Boot] [PATCH 4/4] arm: bcm: configure NAND device and environment   Steve Rae
• [U-Boot] Anyone else having issues with "fastboot flash" - because of this change?   Steve Rae
• [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stephen Warren
• [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stephen Warren
• [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time   Stephen Warren
• [U-Boot] Anyone else having issues with "fastboot flash" - because of this change?   Steve Rae
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Marek Vasut
• [U-Boot] [PATCH v2 1/3] x86: Support booting SeaBIOS   Bin Meng
• [U-Boot] [PATCH v2 2/3] x86: qemu: Enable ACPI table generation by default   Bin Meng
• [U-Boot] [PATCH v2 3/3] x86: Document how to play with SeaBIOS   Bin Meng
• [U-Boot] [PATCH 01/69] dm: timer: Correct timer init ordering after relocation   Bin Meng
• [U-Boot] [PATCH 04/69] syscon: Avoid returning a device on failure   Bin Meng
• [U-Boot] [PATCH 06/69] cpu: Add support for microcode version and CPU ID   Bin Meng
• [U-Boot] [PATCH 07/69] gpio: Add a function to obtain a GPIO vector value   Bin Meng
• [U-Boot] [PATCH 08/69] gpio: Use const where possible   Bin Meng
• [U-Boot] [PATCH 09/69] pci: Add functions to update PCI configuration registers   Bin Meng
• [U-Boot] [PATCH 10/69] pci: Correct a few comments and nits   Bin Meng
• [U-Boot] exynos5: common: Enable CONFIG_USB_ETHER_RTL8152 ethernet support   Minkyu Kang
• [U-Boot] [PATCH 05/69] video: Allow simple-panel to be used without regulators   Bin Meng
• [U-Boot] [PATCH 06/69] cpu: Add support for microcode version and CPU ID   Bin Meng
• [U-Boot] [PATCH 07/69] gpio: Add a function to obtain a GPIO vector value   Bin Meng
• [U-Boot] [PATCH 08/69] gpio: Use const where possible   Bin Meng
• [U-Boot] [PATCH 09/69] pci: Add functions to update PCI configuration registers   Bin Meng
• [U-Boot] [PATCH 10/69] pci: Correct a few comments and nits   Bin Meng
• [U-Boot] [PATCH 11/69] input: i8042: Make sure the keyboard is enabled   Bin Meng
• [U-Boot] [PATCH 12/69] malloc_simple: Add a little more debugging   Bin Meng
• [U-Boot] [PATCH 13/69] x86: Allow use of serial soon after relocation   Bin Meng
• [U-Boot] [PATCH 14/69] x86: cpu: Make the vendor table const   Bin Meng
• [U-Boot] [PATCH 15/69] x86: cpu: Add functions to return the family and stepping   Bin Meng
• [U-Boot] [PATCH 16/69] x86: Move cache-as-RAM code into a common location   Bin Meng
• [U-Boot] [PATCH 17/69] x86: Move microcode code to a common location   Bin Meng
• [U-Boot] [PATCH 18/69] x86: Create a common header for Intel register access   Bin Meng
• [U-Boot] [PATCH 19/69] x86: Add the root-complex block to common intel registers   Bin Meng
• [U-Boot] [PATCH 20/69] x86: Move common LPC code to its own place   Bin Meng
• [U-Boot] [PATCH 12/69] malloc_simple: Add a little more debugging   Bin Meng
• [U-Boot] [PATCH 14/69] x86: cpu: Make the vendor table const   Bin Meng
• [U-Boot] [PATCH 21/69] x86: Add some more common MSR indexes   Bin Meng
• [U-Boot] [PATCH 20/69] x86: Move common LPC code to its own place   Bin Meng
• [U-Boot] [PATCH 22/69] x86: Move common CPU code to its own place   Bin Meng
• [U-Boot] [PATCH 23/69] x86: Rename PORT_RESET to IO_PORT_RESET   Bin Meng
• [U-Boot] [PATCH 24/69] x86: Move Intel Management Engine code to a common place   Bin Meng
• [U-Boot] [PATCH 25/69] x86: ivybridge: Drop sandybridge_early_init()   Bin Meng
• [U-Boot] [PATCH 21/69] x86: Add some more common MSR indexes   Bin Meng
• [U-Boot] [PATCH 26/69] x86: Move common PCH code into a common place   Bin Meng
• [U-Boot] [PATCH 27/69] x86: link: Add required GPIO properties   Bin Meng
• [U-Boot] [PATCH 28/69] x86: dts: link: Move SPD info into the memory controller   Bin Meng
• [U-Boot] [PATCH 29/69] x86: dts: link: Add board ID GPIOs   Bin Meng
• [U-Boot] [PATCH 30/69] x86: gpio: Correct GPIO setup ordering   Bin Meng
• [U-Boot] [PATCH 27/69] x86: link: Add required GPIO properties   Bin Meng
• [U-Boot] [PATCH 28/69] x86: dts: link: Move SPD info into the memory controller   Bin Meng
• [U-Boot] [PATCH 29/69] x86: dts: link: Add board ID GPIOs   Bin Meng
• [U-Boot] [PATCH 30/69] x86: gpio: Correct GPIO setup ordering   Bin Meng
• [U-Boot] [PATCH 31/69] x86: Add common SDRAM-init code   Bin Meng
• [U-Boot] [PATCH 32/69] x86: ivybridge: Convert to use the common SDRAM code   Bin Meng
• [U-Boot] [PATCH 33/69] x86: dts: Drop memory SPD compatible string   Bin Meng
• [U-Boot] [PATCH 34/69] x86: Add a script to aid code conversion from coreboot   Bin Meng
• [U-Boot] [PATCH 35/69] x86: Correct duplicate POST values   Bin Meng
• [U-Boot] [PATCH 34/69] x86: Add a script to aid code conversion from coreboot   Bin Meng
• [U-Boot] [PATCH 35/69] x86: Correct duplicate POST values   Bin Meng
• [U-Boot] [PATCH 36/69] x86: Add macros to clear and set I/O bits   Bin Meng
• [U-Boot] [PATCH v4 0/4] Make usb device-tree fixup independent of USB controller   Sriram Dash
• [U-Boot] [PATCH v4 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file   Sriram Dash
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code   Sriram Dash
• [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stefan Roese
• [U-Boot] [PATCH 37/69] x86: Allow I/O functions to use pointers   Bin Meng
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH 38/69] x86: Move common MRC Kconfig options to the common file   Bin Meng
• [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time   Stefan Roese
• [U-Boot] [PATCH 39/69] x86: Tidy up mp_init to reduce duplication   Bin Meng
• [U-Boot] [PATCH 40/69] x86: Record the CPU details when starting each core   Bin Meng
• [U-Boot] [PATCH 39/69] x86: Tidy up mp_init to reduce duplication   Bin Meng
• [U-Boot] [PATCH 41/69] x86: ivybridge: Show microcode version for each code   Bin Meng
• [U-Boot] [PATCH 42/69] x86: Add comments to the SIPI vector   Bin Meng
• [U-Boot] [PATCH 43/69] x86: Update microcode for secondary CPUs   Bin Meng
• [U-Boot] [PATCH 44/69] x86: link: Add pin configuration to the device tree   Bin Meng
• [U-Boot] [PATCH 45/69] x86: Add an ICH6 pin configuration driver   Bin Meng
• [U-Boot] [PATCH 42/69] x86: Add comments to the SIPI vector   Bin Meng
• [U-Boot] [PATCH 45/69] x86: Add an ICH6 pin configuration driver   Bin Meng
• [U-Boot] [PATCH 46/69] x86: gpio: Allow the pinctrl driver to set up the pin config   Bin Meng
• [U-Boot] [PATCH 47/69] x86: Drop all the old pin configuration code   Bin Meng
• [U-Boot] [PATCH 48/69] x86: Add support for running Intel reference code   Bin Meng
• [U-Boot] [PATCH 49/69] x86: dts: Update the pinctrl binding a little   Bin Meng
• [U-Boot] [PATCH 50/69] x86: Add basic support for broadwell   Bin Meng
• [U-Boot] [PATCH 45/69] x86: Add an ICH6 pin configuration driver   Bin Meng
• [U-Boot] [PATCH 51/69] x86: broadwell: Add a few microcode files   Bin Meng
• [U-Boot] [PATCH 51/69] x86: broadwell: Add a few microcode files   Bin Meng
• [U-Boot] [PATCH 00/69] x86: Add support for samus   Bin Meng
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Jagan Teki
• [U-Boot] [PATCH 52/69] x86: broadwell: Add a PCH driver   Bin Meng
• [U-Boot] [PATCH 53/69] x86: broadwell: Add a pinctrl driver   Bin Meng
• [U-Boot] [PATCH 54/69] x86: broadwell: Add a SATA driver   Bin Meng
• [U-Boot] [PATCH 55/69] x86: broadwell: Add a northbridge driver   Bin Meng
• [U-Boot] [PATCH 56/69] x86: broadwell: Add an LPC driver   Bin Meng
• [U-Boot] [PATCH 57/69] x86: broadwell: Add reference code support   Bin Meng
• [U-Boot] [PATCH 58/69] x86: broadwell: Add power-control support   Bin Meng
• [U-Boot] [PATCH 59/69] x86: broadwell: Add support for SDRAM setup   Bin Meng
• [U-Boot] [PATCH 60/69] x86: broadwell: Add a GPIO driver   Bin Meng
• [U-Boot] [PATCH 61/69] x86: broadwell: Add support for high-speed I/O lane with ME   Bin Meng
• [U-Boot] [PATCH 0/6] tools: env: trivial cleanups in script parsing   Andreas Fenkart
• [U-Boot] [PATCH 1/6] tools: env: replace WHITESPACE macro by isblank   Andreas Fenkart
• [U-Boot] [PATCH 2/6] tools: env: fw_string_blank: return from loop when item found   Andreas Fenkart
• [U-Boot] [PATCH 3/6] tools: env: split fw_string_blank into skip_chars / skip_blanks   Andreas Fenkart
• [U-Boot] [PATCH 4/6] tools: env: fw_parse_script: simplify removal of newline/carriage return   Andreas Fenkart
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] [PATCH 62/69] x86: Support a chained-boot development flow   Bin Meng
• [U-Boot] [PATCH] dm: i2c: mxc_i2c: implement i2c_idle_bus   Peng Fan
• [U-Boot] [PATCH 63/69] x86: broadwell: Add video support   Bin Meng
• [U-Boot] [PATCH 64/69] x86: Add a default address for reference code   Bin Meng
• [U-Boot] [PATCH 65/69] x86: Use white on black for the console on chromebooks   Bin Meng
• [U-Boot] [PATCH 66/69] x86: Update README for new developments   Bin Meng
• [U-Boot] [PATCH 67/69] x86: Add a function to set the IOAPIC ID   Bin Meng
• [U-Boot] [PATCH 68/69] x86: Fix a header nit in x86-chromebook.h   Bin Meng
• [U-Boot] [PATCH 69/69] x86: Add support for the samus chromebook   Bin Meng
• [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally)   Stefan Roese
• [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally)   Stefan Roese
• [U-Boot] [PATCH 1/2] sunxi: A23: Fix some revisions needing a different magic sram poke   Ian Campbell
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for Difrence DIT4350 tablet   Ian Campbell
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally)   Hans de Goede
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally)   Stefan Roese
• [U-Boot] ums command using dwc3   Poonam Aggrwal
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH v2 2/2] warp7: Add initial support   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] warp7: Add initial support   Stefano Babic
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Marek Vasut
• [U-Boot] [PATCH] ti: k2g: increase phy autoneg timeout   Vitaly Andrianov
• [U-Boot] [PATCH] env_eeprom invalidates gd->env_addr by setting it to an offset value   Guy Thouret
• [U-Boot] [PATCH] mx6slevk: Fix the power up of the Ethernet PHY   Fabio Estevam
• [U-Boot] [PATCH v2 0/4] usb: Reduce USB scanning time   Stefan Roese
• [U-Boot] [PATCH v2 1/4] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stefan Roese
• [U-Boot] [PATCH v2 2/4] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH v2 3/4] usb: Don't reset the USB hub a 2nd time   Stefan Roese
• [U-Boot] [PATCH v2 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH 6/6] usb: Implement static USB port configuration to speed up USB scanning   Stefan Roese
• [U-Boot] [PATCH] ti_armv7_common: env: Add NFS loading support to default enviroment   Andrew F. Davis
• [U-Boot] [PATCH] omap24xx_i2c: Implement CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW   Guy Thouret
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Stefan Roese
• [U-Boot] [PATCH v4 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file   Marek Vasut
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Marek Vasut
• [U-Boot] [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code   Marek Vasut
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] [PATCH 01/10] ti_armv7_keystone2: configs: add usb mass storage support   Tom Rini
• [U-Boot] [PATCH 02/10] ti_armv7_keystone2: env: Update UBIFS image paths   Tom Rini
• [U-Boot] [PATCH 03/10] ti_armv7_keystone2: env: Remove securedb.key.bin load   Tom Rini
• [U-Boot] [PATCH 04/10] am335x: configs: Fix usb ether boot support   Tom Rini
• [U-Boot] [PATCH 05/10] am43xx: configs: Enable USB commands for non usb boot also   Tom Rini
• [U-Boot] [PATCH 06/10] ti_armv7_common: env: Consolidate support for loading script and text env files   Tom Rini
• [U-Boot] [PATCH 07/10] k2g: env: Allow use of a script and plain text env files   Tom Rini
• [U-Boot] [PATCH 08/10] k2g: configs: Add support to save env in MMC   Tom Rini
• [U-Boot] [PATCH 09/10] keystone2: env: add env script for booting with an initramfs with firmware   Tom Rini
• [U-Boot] [PATCH 10/10] keystone2: env: Set mmc as default boot for k2g-evm   Tom Rini
• [U-Boot] [PATCH] ti_armv7_common: env: Add NFS loading support to default enviroment   Tom Rini
• [U-Boot] [PATCH] ti: k2g: increase phy autoneg timeout   Tom Rini
• [U-Boot] BayTrail I2C support   Stefan Roese
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH 3/3] armv8/ls1043a: move CONFIG_MTD to defconfig   Jagan Teki
• [U-Boot] [PATCH v2 0/4] usb: Reduce USB scanning time   Stephen Warren
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Tom Rini
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Marek Vasut
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Tom Rini
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Marek Vasut
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Albert ARIBAUD
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Marek Vasut
• [U-Boot] [PATCH v2 0/4] usb: Reduce USB scanning time   Hans de Goede
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Scott Wood
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Scott Wood
• [U-Boot] [PATCH 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [PATCH] ti_armv7_common: env: Add NFS loading support to default enviroment   Andrew F. Davis
• [U-Boot] [PATCH] ti_armv7_common: env: Add NFS loading support to default enviroment   Nishanth Menon
• [U-Boot] [PATCH v2] ti_armv7_common: env: Add NFS loading support to default enviroment   Andrew F. Davis
• [U-Boot] [PATCH v2] ARM: DRA7xx: Enable NFS boot command   Andrew F. Davis
• [U-Boot] [PATCH v2 07/12] net: gmac_rk3288: Add RK3288 GMAC driver   Sjoerd Simons
• [U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support   Daniel Glöckner
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Simon Glass
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
• [U-Boot] [PATCH 2/2] fsl: esdhc: support driver model   Simon Glass
• [U-Boot] [RFC PATCH v2 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [RFC PATCH v2 2/4] mtd: fix compiler warnings   Steve Rae
• [U-Boot] [RFC PATCH v2 3/4] arm: bcm: enable MTD support   Steve Rae
• [U-Boot] [RFC PATCH v2 4/4] arm: bcm: configure NAND device and environment   Steve Rae
• [U-Boot] [PATCH 00/69] x86: Add support for samus   Simon Glass
• [U-Boot] [PATCH 2/2] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH 01/69] dm: timer: Correct timer init ordering after relocation   Simon Glass
• [U-Boot] [PATCH 04/69] syscon: Avoid returning a device on failure   Simon Glass
• [U-Boot] [PATCH 13/69] x86: Allow use of serial soon after relocation   Simon Glass
• [U-Boot] [PATCH 15/69] x86: cpu: Add functions to return the family and stepping   Simon Glass
• [U-Boot] [PATCH 24/69] x86: Move Intel Management Engine code to a common place   Simon Glass
• [U-Boot] [PATCH 48/69] x86: Add support for running Intel reference code   Simon Glass
• [U-Boot] [PATCH 59/69] x86: broadwell: Add support for SDRAM setup   Simon Glass
• [U-Boot] [PATCH 61/69] x86: broadwell: Add support for high-speed I/O lane with ME   Simon Glass
• [U-Boot] [PATCH 62/69] x86: Support a chained-boot development flow   Simon Glass
• [U-Boot] [PATCH 63/69] x86: broadwell: Add video support   Simon Glass
• [U-Boot] [PATCH v2 00/51] x86: Add support for samus   Simon Glass
• [U-Boot] [PATCH v2 01/51] dm: timer: Correct timer init ordering after relocation   Simon Glass
• [U-Boot] [PATCH v2 02/51] arm: Add a 64-bit division routine to the private library   Simon Glass
• [U-Boot] [PATCH v2 03/51] dhry: Correct dhrystone calculation for fast machines   Simon Glass
• [U-Boot] [PATCH v2 04/51] syscon: Avoid returning a device on failure   Simon Glass
• [U-Boot] [PATCH v2 05/51] input: i8042: Make sure the keyboard is enabled   Simon Glass
• [U-Boot] [PATCH v2 06/51] x86: Allow use of serial soon after relocation   Simon Glass
• [U-Boot] [PATCH v2 07/51] x86: cpu: Add functions to return the family and stepping   Simon Glass
• [U-Boot] [PATCH v2 08/51] x86: Move cache-as-RAM code into a common location   Simon Glass
• [U-Boot] [PATCH v2 09/51] x86: Move microcode code to a common location   Simon Glass
• [U-Boot] [PATCH v2 10/51] x86: Create a common header for Intel register access   Simon Glass
• [U-Boot] [PATCH v2 11/51] x86: Add the root-complex block to common intel registers   Simon Glass
• [U-Boot] [PATCH v2 12/51] x86: Move common LPC code to its own place   Simon Glass
• [U-Boot] [PATCH v2 13/51] x86: Move common CPU code to its own place   Simon Glass
• [U-Boot] [PATCH v2 14/51] x86: Rename PORT_RESET to IO_PORT_RESET   Simon Glass
• [U-Boot] [PATCH v2 15/51] x86: Move Intel Management Engine code to a common place   Simon Glass
• [U-Boot] [PATCH v2 16/51] x86: ivybridge: Drop sandybridge_early_init()   Simon Glass
• [U-Boot] [PATCH v2 17/51] x86: Move common PCH code into a common place   Simon Glass
• [U-Boot] [PATCH v2 18/51] x86: Add common SDRAM-init code   Simon Glass
• [U-Boot] [PATCH v2 19/51] x86: ivybridge: Convert to use the common SDRAM code   Simon Glass
• [U-Boot] [PATCH v2 20/51] x86: dts: Drop memory SPD compatible string   Simon Glass
• [U-Boot] [PATCH v2 21/51] x86: Add macros to clear and set I/O bits   Simon Glass
• [U-Boot] [PATCH v2 22/51] x86: Allow I/O functions to use pointers   Simon Glass
• [U-Boot] [PATCH v2 23/51] x86: Move common MRC Kconfig options to the common file   Simon Glass
• [U-Boot] [PATCH v2 24/51] x86: Record the CPU details when starting each core   Simon Glass
• [U-Boot] [PATCH v2 25/51] x86: ivybridge: Show microcode version for each core   Simon Glass
• [U-Boot] [PATCH v2 26/51] x86: Update microcode for secondary CPUs   Simon Glass
• [U-Boot] [PATCH v2 27/51] x86: link: Add pin configuration to the device tree   Simon Glass
• [U-Boot] [PATCH v2 28/51] x86: Add an ICH6 pin configuration driver   Simon Glass
• [U-Boot] [PATCH v2 29/51] x86: gpio: Allow the pinctrl driver to set up the pin config   Simon Glass
• [U-Boot] [PATCH v2 30/51] x86: Drop all the old pin configuration code   Simon Glass
• [U-Boot] [PATCH v2 31/51] x86: Add support for running Intel reference code   Simon Glass
• [U-Boot] [PATCH v2 32/51] x86: dts: Update the pinctrl binding a little   Simon Glass
• [U-Boot] [PATCH v2 33/51] x86: Add basic support for broadwell   Simon Glass
• [U-Boot] [PATCH v2 34/51] x86: broadwell: Add a PCH driver   Simon Glass
• [U-Boot] [PATCH v2 35/51] x86: broadwell: Add a pinctrl driver   Simon Glass
• [U-Boot] [PATCH v2 36/51] x86: broadwell: Add a SATA driver   Simon Glass
• [U-Boot] [PATCH v2 37/51] x86: broadwell: Add a northbridge driver   Simon Glass
• [U-Boot] [PATCH v2 38/51] x86: broadwell: Add an LPC driver   Simon Glass
• [U-Boot] [PATCH v2 39/51] x86: broadwell: Add reference code support   Simon Glass
• [U-Boot] [PATCH v2 40/51] x86: broadwell: Add power-control support   Simon Glass
• [U-Boot] [PATCH v2 41/51] x86: broadwell: Add support for SDRAM setup   Simon Glass
• [U-Boot] [PATCH v2 42/51] x86: broadwell: Add a GPIO driver   Simon Glass
• [U-Boot] [PATCH v2 43/51] x86: broadwell: Add support for high-speed I/O lane with ME   Simon Glass
• [U-Boot] [PATCH v2 44/51] x86: Support a chained-boot development flow   Simon Glass
• [U-Boot] [PATCH v2 45/51] x86: broadwell: Add video support   Simon Glass
• [U-Boot] [PATCH v2 46/51] x86: Add a default address for reference code   Simon Glass
• [U-Boot] [PATCH v2 47/51] x86: Use white on black for the console on chromebooks   Simon Glass
• [U-Boot] [PATCH v2 48/51] x86: Update README for new developments   Simon Glass
• [U-Boot] [PATCH v2 49/51] x86: Add a function to set the IOAPIC ID   Simon Glass
• [U-Boot] [PATCH v2 50/51] x86: Fix a header nit in x86-chromebook.h   Simon Glass
• [U-Boot] [PATCH v2 51/51] x86: Add support for the samus chromebook   Simon Glass
• [U-Boot] [PATCH] dm: core: device: set pinctrl state for pinctrl device   Peng Fan
• [U-Boot] [PATCH] power: regulator: fixed: set gpio direction before set value   Peng Fan
• [U-Boot] [PATCH v2] ti_armv7_common: env: Add NFS loading support to default enviroment   Lokesh Vutla
• [U-Boot] [PATCH 0/5] Add LVDS support for rk3288.   Jacob Chen
• [U-Boot] [PATCH 1/5] dm: video: Add a operation to display uclass   Jacob Chen
• [U-Boot] [PATCH 2/5] rockchip: video: Add a display driver for rockchip LVDS   Jacob Chen
• [U-Boot] [PATCH 3/5] rockchip: dts: Add LVDS support   Jacob Chen
• [U-Boot] [PATCH 4/5] rockchip: video: Add LVDS support in vop driver   Jacob Chen
• [U-Boot] [PATCH 5/5] doc: dt-bindings: Describe rockchip LVDS interface   Jacob Chen
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] [PATCH] sf: Correct data types in stm_is_locked_sr()   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support   Mateusz Kulikowski
• [U-Boot] [RFC PATCH v3 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [RFC PATCH v3 2/4] mtd: fix compiler warnings   Steve Rae
• [U-Boot] [RFC PATCH v3 3/4] arm: bcm: enable MTD support   Steve Rae
• [U-Boot] [RFC PATCH v3 4/4] arm: bcm: configure NAND device and environment   Steve Rae
• [U-Boot] [RFC PATCH v2 1/4] arm: iproc: add NAND driver   Steve Rae
• [U-Boot] [PATCH v2 1/3] buildman: Allow branch names which conflict with directories   Simon Glass
• [U-Boot] [PATCH v2 2/3] buildman: Add a way to specific a full toolchain prefix   Simon Glass
• [U-Boot] [PATCH v2 3/3] buildman: Clarify the use of -V   Simon Glass
• [U-Boot] [PATCH 8/8] buildman: Add a way to specific a full toolchain prefix   Simon Glass
• [U-Boot] [PATCH 1/2] dm: core: Add uclass_first_device_err() to return a valid device   Simon Glass
• [U-Boot] [PATCH 2/2] dm: Use uclass_first_device_err() where it is useful   Simon Glass
• [U-Boot] [PATCH] dm: core: make simple-bus compatible to simple-mfd   Simon Glass
• [U-Boot] [PATCH] debug_uart: output CR along with LF   Simon Glass
• [U-Boot] [PATCH 1/3] dm: serial-uclass: Move a carriage return before a line feed   Simon Glass
• [U-Boot] [PATCH 2/3] serial: Move carriage return before line feed for some serial drivers   Simon Glass
• [U-Boot] [PATCH 3/3] dm: serial: Remove duplicated carriage return character   Simon Glass
• [U-Boot] [PATCH 1/8] fdtgrep: Improve error handling with invalid device tree   Simon Glass
• [U-Boot] [PATCH 2/8] patman: Add a missing space in GetMetaDataForList()   Simon Glass
• [U-Boot] [PATCH 3/8] buildman: patman: Fix -H when installed as a symlink   Simon Glass
• [U-Boot] [PATCH 4/8] buildman: Fix up a few code inconsistencies in toolchain.py   Simon Glass
• [U-Boot] [PATCH 6/8] buildman: Allow the toolchain priority to be specified   Simon Glass
• [U-Boot] [PATCH 7/8] buildman: Allow the toolchain architecture to be specified   Simon Glass
• [U-Boot] [PATCH v2 01/32] dm: Drop the block_dev_desc_t typedef   Simon Glass
• [U-Boot] [PATCH v2 02/32] dm: pci: Break out the common region display code   Simon Glass
• [U-Boot] [PATCH v2 03/32] dm: part: Correct a sandbox build warning   Simon Glass
• [U-Boot] [PATCH v2 04/32] dm: fdtdec: Correct a sandbox build warning   Simon Glass
• [U-Boot] [PATCH v2 05/32] dm: part: Drop the common.h header   Simon Glass
• [U-Boot] [PATCH v2 06/32] dm: Add a new header for block devices   Simon Glass
• [U-Boot] [PATCH v2 07/32] dm: blk: Convert interface type to an enum   Simon Glass
• [U-Boot] [PATCH v2 08/32] dm: blk: Add comments to a few functions   Simon Glass
• [U-Boot] [PATCH v2 09/32] dm: blk: Rename get_dev() to blk_get_dev()   Simon Glass
• [U-Boot] [PATCH v2 10/32] dm: blk: Rename get_device() to blk_get_device_by_str()   Simon Glass
• [U-Boot] [PATCH v2 11/32] dm: blk: Rename get_device_and_partition()   Simon Glass
• [U-Boot] [PATCH v2 12/32] dm: part: Add a cast to avoid a compiler warning   Simon Glass
• [U-Boot] [PATCH v2 13/32] dm: sandbox: Enable all partition types   Simon Glass
• [U-Boot] [PATCH v2 14/32] dm: part: Convert partition API use to linker lists   Simon Glass
• [U-Boot] [PATCH v2 15/32] dm: part: Rename some partition functions   Simon Glass
• [U-Boot] [PATCH v2 16/32] dm: cbfs: Fix handling of invalid type   Simon Glass
• [U-Boot] [PATCH v2 17/32] dm: sandbox: Enable cbfs and cramfs   Simon Glass
• [U-Boot] [PATCH v2 18/32] dm: block: Rename device number member dev to devnum   Simon Glass
• [U-Boot] [PATCH v2 19/32] dm: block: Adjust device calls to go through helpers function   Simon Glass
• [U-Boot] [PATCH v2 20/32] dm: usb: Avoid exceeding available array size for storage devices   Simon Glass
• [U-Boot] [PATCH v2 21/32] dm: usb: Tidy up storage code ready for driver model conversion   Simon Glass
• [U-Boot] [PATCH v2 22/32] dm: blk: Add a block-device uclass   Simon Glass
• [U-Boot] [PATCH v2 23/32] dm: sandbox: Prepare block driver for driver-model conversion   Simon Glass
• [U-Boot] [PATCH v2 24/32] dm: sandbox: Add driver-model block-device support for sandbox   Simon Glass
• [U-Boot] [PATCH v2 25/32] dm: usb: Convert USB storage to use driver-model for block devs   Simon Glass
• [U-Boot] [PATCH v2 25/32] dm: usb: Convert USB storage to use driver-model for block devs   Simon Glass
• [U-Boot] [PATCH v2 29/32] dm: usb: Clean up USB after each test   Simon Glass
• [U-Boot] [PATCH v2 31/32] part: Rename test_part_xx() and print_part_xx()   Simon Glass
• [U-Boot] [PATCH v2 32/32] Drop CONFIG_CRAMFS_CMDLINE   Simon Glass
• [U-Boot] [PATCH v3 2/4] gpio: Report errors when GPIOs cannot be read   Simon Glass
• [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent   Simon Glass
• [U-Boot] [PATCH 1/2] dts:exynos:update pinctrl size-cells and fix child regs   Simon Glass
• [U-Boot] [PATCH 2/2] Revert "fdt: fix address cell count checking in fdt_translate_address()"   Simon Glass
• [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property   Simon Glass
• [U-Boot] [PATCH v2 07/12] net: gmac_rk3288: Add RK3288 GMAC driver   Simon Glass
• [U-Boot] [PATCH] ls102xa: dm: serial: Disable CONFIG_DM_STDIO for LCD/HDMI display   Simon Glass
• [U-Boot] [PATCH v2 01/12] net: designware: support phy reset device-tree bindings   Simon Glass
• [U-Boot] [PATCH 0/5] Add LVDS support for rk3288.   Simon Glass
• [U-Boot] [PATCH 1/5] dm: video: Add a operation to display uclass   Simon Glass
• [U-Boot] [PATCH 2/5] rockchip: video: Add a display driver for rockchip LVDS   Simon Glass
• [U-Boot] [PATCH 3/5] rockchip: dts: Add LVDS support   Simon Glass
• [U-Boot] [PATCH 4/5] rockchip: video: Add LVDS support in vop driver   Simon Glass
• [U-Boot] [PATCH 5/5] doc: dt-bindings: Describe rockchip LVDS interface   Simon Glass
• [U-Boot] [PATCH v2 04/12] rockchip: rk3288: pinctrl: support more pins   Simon Glass
• [U-Boot] [PATCH v2 05/12] rockchip: rk3288: Add clock support for the gmac ethernet interface   Simon Glass
• [U-Boot] [PATCH v2 06/12] rockchip: rk3288: grf: Define GRF_SOC_CON1 and GRF_SOC_CON3   Simon Glass
• [U-Boot] [PATCH v2 08/12] rockchip: rk3288-firefly: Add gmac definition   Simon Glass
• [U-Boot] [PATCH v2 09/12] rockchip: rock2: dts: use status = "okay" not ok   Simon Glass
• [U-Boot] [PATCH] dm: core: device: set pinctrl state for pinctrl device   Simon Glass
• [U-Boot] [PATCH] power: regulator: fixed: set gpio direction before set value   Simon Glass
• [U-Boot] [PATCH 2/2] fsl: esdhc: support driver model   Simon Glass
• [U-Boot] buildman for sandbox   Simon Glass
• [U-Boot] [PATCH] spl: add a new stub spl_early_board_init() for early SoC-specific setup   Simon Glass
• [U-Boot] [PATCH 1/3] drivers: block: Kconfig: set default n to CONFIG_DISK   Simon Glass
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Simon Glass
• [U-Boot] BayTrail I2C support   Simon Glass
• [U-Boot] [PATCH] power: regulator: fixed: set gpio direction before set value   Peng Fan
• [U-Boot] [PATCH 2/2] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request   Anand Moon
• [U-Boot] [PATCH 1/3] drivers: block: Kconfig: set default n to CONFIG_DISK   Tom Rini
• [U-Boot] [PATCH] mx6slevk: Fix the power up of the Ethernet PHY   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH] mx6slevk: Fix the power up of the Ethernet PHY   Tom Rini
• [U-Boot] [PATCH v3 0/4] dm: Add driver-model support for block drivers   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: usb: Unbind old block devices when shutting down USB   Simon Glass
• [U-Boot] [PATCH v3 2/4] dm: sandbox: Switch over to use DM for block devices   Simon Glass
• [U-Boot] [PATCH v3 3/4] dm: sandbox: Drop the pre-DM host implementation   Simon Glass
• [U-Boot] [PATCH v3 4/4] dm: blk: Add tests for block devices   Simon Glass
• [U-Boot] [PATCH v2] ti_armv7_common: env: Add NFS loading support to default enviroment   Andrew F. Davis
• [U-Boot] [PATCH v2 25/32] dm: usb: Convert USB storage to use driver-model for block devs   Marek Vasut
• [U-Boot] [PATCH v2 0/3] Add LVDS support for rk3288   Jacob Chen
• [U-Boot] [PATCH v2 2/3] rockchip: video: Add a display driver for rockchip LVDS   Jacob Chen
• [U-Boot] [PATCH v2 3/3] doc: dt-bindings: Describe rockchip LVDS interface   Jacob Chen
• [U-Boot] [PATCH v2 1/3] Add a bingding file for rockchip video   陈豪
• [U-Boot] [PATCH v2 1/3] Add a binding file for rockchip video   Jacob Chen
• [U-Boot] [PATCH v2 0/3] Add LVDS support for rk3288   Simon Glass
• [U-Boot] [PATCH v2 2/3] rockchip: video: Add a display driver for rockchip LVDS   Simon Glass
• [U-Boot] [PATCH v2 1/3] Add a binding file for rockchip video   Simon Glass
• [U-Boot] [PATCH] usb: Add new command to regress USB devices   Wolfgang Denk
• [U-Boot] [PATCH v2 17/18] board: Add Qualcomm Dragonboard 410C support   Daniel Glöckner
• [U-Boot] [PATCH v3 00/21] Add support for 96boards Dragonboard410C board   Mateusz Kulikowski
• [U-Boot] [PATCH v3 01/21] serial: Add support for Qualcomm serial port   Mateusz Kulikowski
• [U-Boot] [PATCH v3 02/21] gpio: Add support for Qualcomm gpio controller   Mateusz Kulikowski
• [U-Boot] [PATCH v3 03/21] mmc: Add support for Qualcomm SDHCI controller   Mateusz Kulikowski
• [U-Boot] [PATCH v3 04/21] ehci-hcd: Add init_after_reset   Mateusz Kulikowski
• [U-Boot] [PATCH v3 05/21] usb: ulpi: Add Kconfig options for ULPI   Mateusz Kulikowski
• [U-Boot] [PATCH v3 06/21] Migrate CONFIG_ULPI* to Kconfig   Mateusz Kulikowski
• [U-Boot] [PATCH v3 07/21] usb: ulpi: Fix viewport_addr type   Mateusz Kulikowski
• [U-Boot] [PATCH v3 08/21] usb: ulpi: Fix compile warning in read/write on 64-bit machines.   Mateusz Kulikowski
• [U-Boot] [PATCH v3 09/21] eth: asix88179: Print packet length properly   Mateusz Kulikowski
• [U-Boot] [PATCH v3 10/21] usb: Rename ehci-fsl.h to ehci-ci.h   Mateusz Kulikowski
• [U-Boot] [PATCH v3 11/21] usb: ehci-ci: Add missing registers.   Mateusz Kulikowski
• [U-Boot] [PATCH v3 12/21] ehci-ci.h: drop generic USBCMD fields   Mateusz Kulikowski
• [U-Boot] [PATCH v3 13/21] ehci: Add support for Qualcomm EHCI   Mateusz Kulikowski
• [U-Boot] [PATCH v3 14/21] drivers: Add SPMI bus uclass   Mateusz Kulikowski
• [U-Boot] [PATCH v3 15/21] spmi: Add sandbox test driver   Mateusz Kulikowski
• [U-Boot] [PATCH v3 16/21] drivers: spmi: Add support for Qualcomm SPMI bus driver   Mateusz Kulikowski
• [U-Boot] [PATCH v3 17/21] pmic: Add support for Qualcomm PM8916 PMIC   Mateusz Kulikowski
• [U-Boot] [PATCH v3 18/21] gpio: Add support for Qualcomm PM8916 gpios   Mateusz Kulikowski
• [U-Boot] [PATCH v3 19/21] arm: Add support for Qualcomm Snapdragon family   Mateusz Kulikowski
• [U-Boot] [PATCH v3 20/21] board: Add Qualcomm Dragonboard 410C support   Mateusz Kulikowski
• [U-Boot] [PATCH v3 21/21] Add myself as Snapdragon and SPMI maintainer   Mateusz Kulikowski
• [U-Boot] [PATCH v2 0/9] Add CONFIG_CMDLINE to allow removal of all commands   Simon Glass
• [U-Boot] [PATCH v2 1/9] cbfs: Update a function to be static   Simon Glass
• [U-Boot] [PATCH v2 2/9] Add an option to enable the command line   Simon Glass
• [U-Boot] [PATCH v2 3/9] arm: x86: Drop command-line code when CONFIG_CMDLINE is disabled   Simon Glass
• [U-Boot] [PATCH v2 4/9] sandbox: Avoid calling commands when not available   Simon Glass
• [U-Boot] [PATCH v2 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled   Simon Glass
• [U-Boot] [PATCH v2 6/9] Panic when no command line processing can be performed   Simon Glass
• [U-Boot] [PATCH v2 7/9] Allow command code to compile to nothing   Simon Glass
• [U-Boot] [PATCH v2 8/9] Allow command-line files to be dropped   Simon Glass
• [U-Boot] [PATCH v2 9/9] Drop various features when the command line is not available   Simon Glass
• [U-Boot] [PATCH v2] serial: pl01x: Add support for devices with the rate pre-configured.   Eric Anholt
• [U-Boot] [PATCH] ls102xa: dm: serial: Disable CONFIG_DM_STDIO for LCD/HDMI display   Huan Wang
• [U-Boot] [PATCH v3 0/6] Add LVDS support for rk3288   Jacob Chen
• [U-Boot] [PATCH v3 1/6] dm: video: Add a operation to display uclass   Jacob Chen
• [U-Boot] [PATCH v3 2/6] rockchip: Add a binding file for rk3288 video   Jacob Chen
• [U-Boot] [PATCH v3 3/6] rockchip: video: Add a display driver for rockchip LVDS   Jacob Chen
• [U-Boot] [PATCH v3 4/6] rockchip: dts: Add LVDS support   Jacob Chen
• [U-Boot] [PATCH v3 5/6] rockchip: video: Add LVDS support in vop driver   Jacob Chen
• [U-Boot] [PATCH v3 6/6] doc: dt-bindings: Describe rockchip LVDS interface   Jacob Chen
• [U-Boot] [PATCH v3 3/6] rockchip: video: Add a display driver for rockchip LVDS   Simon Glass
• [U-Boot] [PATCH v2 01/51] dm: timer: Correct timer init ordering after relocation   Bin Meng
• [U-Boot] [PATCH v2 04/51] syscon: Avoid returning a device on failure   Bin Meng
• [U-Boot] [PATCH v2 05/51] input: i8042: Make sure the keyboard is enabled   Bin Meng
• [U-Boot] [PATCH v2 06/51] x86: Allow use of serial soon after relocation   Bin Meng
• [U-Boot] [PATCH v2 07/51] x86: cpu: Add functions to return the family and stepping   Bin Meng
• [U-Boot] [PATCH 15/69] x86: cpu: Add functions to return the family and stepping   Bin Meng
• [U-Boot] [PATCH v2 01/51] dm: timer: Correct timer init ordering after relocation   Bin Meng
• [U-Boot] [PATCH v2 04/51] syscon: Avoid returning a device on failure   Bin Meng
• [U-Boot] [PATCH v2 05/51] input: i8042: Make sure the keyboard is enabled   Bin Meng
• [U-Boot] [PATCH v2 06/51] x86: Allow use of serial soon after relocation   Bin Meng
• [U-Boot] [PATCH v2 07/51] x86: cpu: Add functions to return the family and stepping   Bin Meng
• [U-Boot] [PATCH v2 08/51] x86: Move cache-as-RAM code into a common location   Bin Meng
• [U-Boot] [PATCH v2 10/51] x86: Create a common header for Intel register access   Bin Meng
• [U-Boot] [PATCH v2 11/51] x86: Add the root-complex block to common intel registers   Bin Meng
• [U-Boot] [PATCH v2 08/51] x86: Move cache-as-RAM code into a common location   Bin Meng
• [U-Boot] [PATCH v2 10/51] x86: Create a common header for Intel register access   Bin Meng
• [U-Boot] [PATCH v2 11/51] x86: Add the root-complex block to common intel registers   Bin Meng
• [U-Boot] [PATCH v2 09/51] x86: Move microcode code to a common location   Bin Meng
• [U-Boot] [PATCH v2 14/51] x86: Rename PORT_RESET to IO_PORT_RESET   Bin Meng
• [U-Boot] [PATCH v2 12/51] x86: Move common LPC code to its own place   Bin Meng
• [U-Boot] [PATCH v2 13/51] x86: Move common CPU code to its own place   Bin Meng
• [U-Boot] [PATCH v2 14/51] x86: Rename PORT_RESET to IO_PORT_RESET   Bin Meng
• [U-Boot] [PATCH v2 15/51] x86: Move Intel Management Engine code to a common place   Bin Meng
• [U-Boot] [PATCH v2 16/51] x86: ivybridge: Drop sandybridge_early_init()   Bin Meng
• [U-Boot] [PATCH v2] ti_armv7_common: env: Add NFS loading support to default enviroment   Lokesh Vutla
• [U-Boot] [PATCH v2 17/51] x86: Move common PCH code into a common place   Bin Meng
• [U-Boot] [PATCH v2 18/51] x86: Add common SDRAM-init code   Bin Meng
• [U-Boot] [PATCH v2 16/51] x86: ivybridge: Drop sandybridge_early_init()   Bin Meng
• [U-Boot] [PATCH v2 20/51] x86: dts: Drop memory SPD compatible string   Bin Meng
• [U-Boot] [PATCH v2 21/51] x86: Add macros to clear and set I/O bits   Bin Meng
• [U-Boot] [PATCH v2 23/51] x86: Move common MRC Kconfig options to the common file   Bin Meng
• [U-Boot] [PATCH v2 24/51] x86: Record the CPU details when starting each core   Bin Meng
• [U-Boot] [PATCH v2 20/51] x86: dts: Drop memory SPD compatible string   Bin Meng
• [U-Boot] [PATCH v2 21/51] x86: Add macros to clear and set I/O bits   Bin Meng
• [U-Boot] [PATCH v2 22/51] x86: Allow I/O functions to use pointers   Bin Meng
• [U-Boot] [PATCH v2 23/51] x86: Move common MRC Kconfig options to the common file   Bin Meng
• [U-Boot] [PATCH v2 24/51] x86: Record the CPU details when starting each core   Bin Meng
• [U-Boot] [PATCH v2 25/51] x86: ivybridge: Show microcode version for each core   Bin Meng
• [U-Boot] [PATCH v2 26/51] x86: Update microcode for secondary CPUs   Bin Meng
• [U-Boot] [PATCH v2 27/51] x86: link: Add pin configuration to the device tree   Bin Meng
• [U-Boot] [PATCH v2 28/51] x86: Add an ICH6 pin configuration driver   Bin Meng
• [U-Boot] [PATCH v2 26/51] x86: Update microcode for secondary CPUs   Bin Meng
• [U-Boot] [PATCH v2 27/51] x86: link: Add pin configuration to the device tree   Bin Meng
• [U-Boot] [PATCH v2 28/51] x86: Add an ICH6 pin configuration driver   Bin Meng
• [U-Boot] [PATCH v2 29/51] x86: gpio: Allow the pinctrl driver to set up the pin config   Bin Meng
• [U-Boot] [PATCH v2 30/51] x86: Drop all the old pin configuration code   Bin Meng
• [U-Boot] [PATCH v2 31/51] x86: Add support for running Intel reference code   Bin Meng
• [U-Boot] [PATCH v2 31/51] x86: Add support for running Intel reference code   Bin Meng
• [U-Boot] [PATCH v2 32/51] x86: dts: Update the pinctrl binding a little   Bin Meng
• [U-Boot] [PATCH v2 33/51] x86: Add basic support for broadwell   Bin Meng
• [U-Boot] [PATCH v2 34/51] x86: broadwell: Add a PCH driver   Bin Meng
• [U-Boot] [PATCH v2 35/51] x86: broadwell: Add a pinctrl driver   Bin Meng
• [U-Boot] [PATCH v2 36/51] x86: broadwell: Add a SATA driver   Bin Meng
• [U-Boot] [PATCH v2 37/51] x86: broadwell: Add a northbridge driver   Bin Meng
• [U-Boot] [PATCH v2 38/51] x86: broadwell: Add an LPC driver   Bin Meng
• [U-Boot] [PATCH v2 39/51] x86: broadwell: Add reference code support   Bin Meng
• [U-Boot] [PATCH v2 39/51] x86: broadwell: Add reference code support   Bin Meng
• [U-Boot] [PATCH v2 40/51] x86: broadwell: Add power-control support   Bin Meng
• [U-Boot] [PATCH v2 41/51] x86: broadwell: Add support for SDRAM setup   Bin Meng
• [U-Boot] [PATCH v2 43/51] x86: broadwell: Add support for high-speed I/O lane with ME   Bin Meng
• [U-Boot] [PATCH 62/69] x86: Support a chained-boot development flow   Bin Meng
• [U-Boot] [PATCH v2 41/51] x86: broadwell: Add support for SDRAM setup   Bin Meng
• [U-Boot] [PATCH v2 42/51] x86: broadwell: Add a GPIO driver   Bin Meng
• [U-Boot] [PATCH v2 43/51] x86: broadwell: Add support for high-speed I/O lane with ME   Bin Meng
• [U-Boot] [PATCH v2 45/51] x86: broadwell: Add video support   Bin Meng
• [U-Boot] [PATCH v2 46/51] x86: Add a default address for reference code   Bin Meng
• [U-Boot] [PATCH v2 47/51] x86: Use white on black for the console on chromebooks   Bin Meng
• [U-Boot] [PATCH v2 48/51] x86: Update README for new developments   Bin Meng
• [U-Boot] [PATCH v2 49/51] x86: Add a function to set the IOAPIC ID   Bin Meng
• [U-Boot] [PATCH v2 50/51] x86: Fix a header nit in x86-chromebook.h   Bin Meng
• [U-Boot] [PATCH v2 00/51] x86: Add support for samus   Bin Meng
• [U-Boot] [PATCH 3/3] armv8/ls1043a: move CONFIG_MTD to defconfig   Qianyu Gong
• [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01   Hans de Goede
• [U-Boot] BayTrail I2C support   Bin Meng
• [U-Boot] fdt problem   Safa Hamza
• [U-Boot] [PATCH 1/2] armv8/ls1043aqds: fix print info for QSPI boot   Gong Qianyu
• [U-Boot] [PATCH 1/2] armv8/ls1043aqds: fix to get boot device info from FPGA   Gong Qianyu
• [U-Boot] [PATCH 2/2] armv8/ls1043aqds: use configuarable clock for non-QSPI boot   Gong Qianyu
• [U-Boot] [PATCH 1/2] armv8/ls1043aqds: fix print info for QSPI boot   Qianyu Gong
• [U-Boot] [PATCH v3 0/4] usb: Reduce USB scanning time   Stefan Roese
• [U-Boot] [PATCH v3 1/4] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stefan Roese
• [U-Boot] [PATCH v3 2/4] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH v3 3/4] usb: Don't reset the USB hub a 2nd time   Stefan Roese
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH] drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only   Codrin Ciubotariu
• [U-Boot] [PATCH] powerpc: t1040qds: Use generic ethsw commands   Codrin Ciubotariu
• [U-Boot] [PATCH] drivers: net: vsc9953: Do not configure disabled ports   Codrin Ciubotariu
• [U-Boot] [PATCH] ti: k2g: increase phy autoneg timeout   Vitaly Andrianov
• [U-Boot] [PATCH] ti: k2g: increase phy autoneg timeout   Tom Rini
• [U-Boot] BayTrail I2C support   Stefan Roese
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Daniel Schwierzeck
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Hans de Goede
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] Olimex-A20-EVB ethernet stops working with latest U-boot, works with tag v2016.01   Ing. Damiano Bolla
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Jagan Teki
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] [PATCH v2 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled   Tom Rini
• [U-Boot] [PATCH v2 6/9] Panic when no command line processing can be performed   Tom Rini
• [U-Boot] [PATCH v2] serial: pl01x: Add support for devices with the rate pre-configured.   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.03 released   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.03 released   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] buildman: Add a way to specific a full toolchain prefix   Stephen Warren
• [U-Boot] [PATCH v2 3/3] buildman: Clarify the use of -V   Stephen Warren
• [U-Boot] [PATCH v3 2/4] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stephen Warren
• [U-Boot] [PATCH v3 05/21] usb: ulpi: Add Kconfig options for ULPI   Marek Vasut
• [U-Boot] [PATCH v3 07/21] usb: ulpi: Fix viewport_addr type   Marek Vasut
• [U-Boot] [PATCH v3 08/21] usb: ulpi: Fix compile warning in read/write on 64-bit machines.   Marek Vasut
• [U-Boot] [PATCH v3 09/21] eth: asix88179: Print packet length properly   Marek Vasut
• [U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request   Marek Vasut
• [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver   Jagan Teki
• [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static   Jagan Teki
• [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model   Jagan Teki
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stephen Warren
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Jagan Teki
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stephen Warren
• [U-Boot] [PATCH v2 25/32] dm: usb: Convert USB storage to use driver-model for block devs   Stephen Warren
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Stephen Warren
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: Sync dts files with the upstream kernel   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Add defconfig and dts for the Polaroid MID2809PXE4 tablet   Hans de Goede
• [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent   Michal Simek
• [U-Boot] [PATCH v3 0/6] Add LVDS support for rk3288   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] video: ipu: avoid overflow issue   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] imx: mx6: correct IPU clock   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] imx: mx6: hdmi: handle overflow condition   Anatolij Gustschin
• [U-Boot] [PATCH 0/4] ARM: sheevaplug: misc fixes   Peter Korsgaard
• [U-Boot] [PATCH 0/4] ARM: sheevaplug: misc fixes   Luka Perkov
• [U-Boot] Please pull u-boot-marvell/master   Luka Perkov
• [U-Boot] [PATCH 0/4] ARM: sheevaplug: misc fixes   Peter Korsgaard
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent   David Gibson
• [U-Boot] BayTrail I2C support   Bin Meng
• [U-Boot] fdt problem   Peng Fan
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value   Peng Fan
• [U-Boot] [PATCH 2/2] dm: gpio: mxc: implement xlate function   Peng Fan
• [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver   Jagan Teki
• [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static   Jagan Teki
• [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model   Jagan Teki
• [U-Boot] [PATCH 0/5] Add QSPI support for LS2080A   Yuan Yao
• [U-Boot] [PATCH 0/5] Add QSPI support for LS2080A   Yuan Yao
• [U-Boot] [PATCH 1/4] spi: fsl_qspi: Fix issues on arm64   Yuan Yao
• [U-Boot] [PATCH 2/5] spi: fsl_qspi: Assign AMBA mem according CS num in dts   Yuan Yao
• [U-Boot] [PATCH 3/5] spi: fsl_qspi: Enable Spansion S25FS-S family flashes   Yuan Yao
• [U-Boot] [PATCH 4/5] sf: Disable 4-KB erase command for SPANSION S25FS-S family   Yuan Yao
• [U-Boot] [PATCH 5/5] armv8/ls1043a: update the node for QSPI support   Yuan Yao
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] Please pull : u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH] armv8/ls1043a: update env settings for booting kernel   Gong Qianyu
• [U-Boot] [PATCH 1/2] sunxi: Sync dts files with the upstream kernel   Ian Campbell
• [U-Boot] [PATCH v4 0/4] usb: Reduce USB scanning time   Stefan Roese
• [U-Boot] [PATCH v4 1/4] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stefan Roese
• [U-Boot] [PATCH v4 2/4] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH v4 3/4] usb: Don't reset the USB hub a 2nd time   Stefan Roese
• [U-Boot] [PATCH v4 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   Peng Fan
• [U-Boot] [PATCH V2] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH 1/2] sunxi: Sync dts files with the upstream kernel   Hans de Goede
• [U-Boot] [PATCH v2 1/2] flash: add device ID for Microchip PIC32 internal flash.   Purna Chandra Mandal
• [U-Boot] [PATCH v2 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] [PATCH v4 4/4] usb: Change power-on / scanning timeout handling   Hans de Goede
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH v4 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static   Tom Rini
• [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver   Tom Rini
• [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model   Tom Rini
• [U-Boot] [PATCH 1/4] omap3: String-based reboot mode handling   Tom Rini
• [U-Boot] [PATCH 2/4] omap3: Use a define for reboot reason offset   Tom Rini
• [U-Boot] [PATCH 3/4] sniper: Get rid of reset_misc   Tom Rini
• [U-Boot] [PATCH 4/4] sniper: Clear reboot mode garbage on cold reset   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] common: Add support for environment file in EXT4.   Tom Rini
• [U-Boot] [U-Boot, v2, 01/27] mkimage: Move argument processing into its own function   Tom Rini
• [U-Boot] [U-Boot,v2,02/27] mkimage: Convert to use getopt()   Tom Rini
• [U-Boot] [U-Boot, v2, 03/27] mkimage: Sort the option processing code by option   Tom Rini
• [U-Boot] [U-Boot,v2,04/27] mkimage: Move usage() up to the top   Tom Rini
• [U-Boot] [U-Boot, v2, 05/27] mkimage: Show an error message when usage() is called   Tom Rini
• [U-Boot] [U-Boot,v2,06/27] mkimage: Make 'params' static   Tom Rini
• [U-Boot] [U-Boot, v2, 07/27] libfdt: Add a function to write a property placeholder   Tom Rini
• [U-Boot] [U-Boot,v2,08/27] Correct defconfig ordering   Tom Rini
• [U-Boot] [U-Boot, v2, 09/27] freescale: Remove CONFIG_DM from header files   Tom Rini
• [U-Boot] [U-Boot,v2,10/27] Move CONFIG_OF_LIBFDT to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 11/27] Kconfig: Move CONFIG_FIT and related options to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 12/27] fdt: Adjust DEFAULT_DEVICE_TREE to device on OF_CONTROL   Tom Rini
• [U-Boot] [U-Boot,v2,13/27] fdt: Allow libfdt to be used in SPL   Tom Rini
• [U-Boot] [U-Boot, v2, 14/27] sunxi: Display the board model on start-up   Tom Rini
• [U-Boot] [U-Boot, v2, 15/27] tools: Include fdt_sw.o in libfdt for mkimage   Tom Rini
• [U-Boot] [U-Boot, v2, 16/27] mkimage: Allow a FIT to include an image of any type   Tom Rini
• [U-Boot] [U-Boot, v2, 17/27] tools: Add a function to obtain the size of a file   Tom Rini
• [U-Boot] [U-Boot, v2, 18/27] image: Add functions to obtain short names   Tom Rini
• [U-Boot] [U-Boot, v2, 19/27] mkimage: Support automatic creating of a FIT without a .its   Tom Rini
• [U-Boot] [U-Boot, v2, 20/27] mkimage: Support adding device tree files to a FIT   Tom Rini
• [U-Boot] [U-Boot, v2, 21/27] mkimage: Support placing data outside the FIT   Tom Rini
• [U-Boot] [U-Boot, v2, 22/27] mkimage: Bring data into the FIT before processing   Tom Rini
• [U-Boot] [U-Boot, v2, 23/27] spl: Add a way for boards to select which device tree to load   Tom Rini
• [U-Boot] [U-Boot, v2, 24/27] spl: Add an option to load a FIT containing U-Boot   Tom Rini
• [U-Boot] [U-Boot, v2, 25/27] spl: Add a way to specify a list of device trees to include   Tom Rini
• [U-Boot] [U-Boot,v2,26/27] spl: Support loading a FIT from MMC   Tom Rini
• [U-Boot] [U-Boot, V5, 1/7] ARM: OMAP4/5: Centralize early clock initialization   Tom Rini
• [U-Boot] [U-Boot,V5,2/7] ARM: OMAP4/5: Centralize gpi2c_init   Tom Rini
• [U-Boot] [U-Boot, V5, 3/7] ARM: omap-common: Add standard access for board description EEPROM   Tom Rini
• [U-Boot] [U-Boot, V5, 4/7] ti: AM335x: Use generic EEPROM detection logic   Tom Rini
• [U-Boot] [U-Boot, V5, 5/7] ti: AM437x: Use generic EEPROM detection logic   Tom Rini
• [U-Boot] [U-Boot, V5, 6/7] ARM: OMAP4/5: Add generic board detection hook   Tom Rini
• [U-Boot] [U-Boot, V5, 7/7] board: ti: AM57xx: Add detection logic for AM57xx-evm   Tom Rini
• [U-Boot] ARM: keystone2: Get rid of unused clock files   Tom Rini
• [U-Boot] [U-Boot, V2, 1/6] ARM: keystone2: psc: redo doc in kernel-doc format   Tom Rini
• [U-Boot] [U-Boot, V2, 2/6] ARM: keystone2: psc-defs: use adequate () for macros   Tom Rini
• [U-Boot] [U-Boot, V2, 3/6] ARM: keystone2: psc: introduce function to hold and release module in reset.   Tom Rini
• [U-Boot] [U-Boot, V2, 4/6] remoteproc: Add support for TI power processor   Tom Rini
• [U-Boot] [U-Boot,V2,5/6] ARM: dts: k2g: Add support for PMMC   Tom Rini
• [U-Boot] [U-Boot, V2, 6/6] configs: k2g_evm: Add TI power processor support   Tom Rini
• [U-Boot] arm: Add support for LEGO MINDSTORMS EV3   Tom Rini
• [U-Boot] [U-Boot, v6, 1/2] common: image-fit: Use a common function to get address   Tom Rini
• [U-Boot] [U-Boot, v6, 2/2] common: image-fit: Fix load and entry addresses in FIT image   Tom Rini
• [U-Boot] [U-Boot,1/3] lib/crc16.c: Coding-style cleanup   Tom Rini
• [U-Boot] [U-Boot, 2/3] lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start value   Tom Rini
• [U-Boot] [PATCH v2 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Daniel Schwierzeck
• [U-Boot] [U-Boot, 3/3] include/crc.h: Remove unreferenced cyg_xxx() prototypes   Tom Rini
• [U-Boot] [U-Boot, V2, 1/6] ARM: keystone2: Use macro for DSP GEM power domain   Tom Rini
• [U-Boot] [U-Boot, V2, 2/6] ARM: keystone2: K2G: power-off DSP during boot   Tom Rini
• [U-Boot] [U-Boot, V2, 3/6] ARM: keystone2: Allow for board specific speed definitions   Tom Rini
• [U-Boot] [U-Boot, V2, 4/6] ARM: keystone2: K2G: Add support for different arm/device speeds   Tom Rini
• [U-Boot] [PATCH v2 1/2] flash: add device ID for Microchip PIC32 internal flash.   Daniel Schwierzeck
• [U-Boot] [U-Boot, V2, 5/6] ARM: keystone2: use SPD info to configure K2HK and K2E DDR3   Tom Rini
• [U-Boot] [U-Boot, V2, 6/6] ARM: keystone2: use detected ddr3a size   Tom Rini
• [U-Boot] dm: omap_timer: Fix conversion of address to a pointer   Tom Rini
• [U-Boot] [U-Boot, 1/4] ARM: DRA7: emif: Fix updating of refresh ctrl shadow   Tom Rini
• [U-Boot] [U-Boot, 2/4] ARM: DRA7: emif: Fix DDR init sequence during warm reset   Tom Rini
• [U-Boot] [U-Boot, 3/4] ARM: DRA7: emif: Check for enable bits before updating leveling output   Tom Rini
• [U-Boot] [U-Boot, 4/4] ARM: DRA7: emif: Enable interleaving for higher address space   Tom Rini
• [U-Boot] ARM: OMAP4+: Allow arch specfic code to use early DM   Tom Rini
• [U-Boot] [U-Boot, V6] ARM: Various: Future-proof serial platdata   Tom Rini
• [U-Boot] [U-Boot,v2] ARM: AM57xx: Update EMIF registers   Tom Rini
• [U-Boot] [U-Boot, v2, 1/6] ti: common: dra7: Add standard access for board description EEPROM   Tom Rini
• [U-Boot] [U-Boot,v2,2/6] ARM: DRA7: Enable EEPROM support   Tom Rini
• [U-Boot] [U-Boot, v2, 3/6] ARM: DRA7: Move emif settings to board specific files   Tom Rini
• [U-Boot] [U-Boot, v2, 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB   Tom Rini
• [U-Boot] [U-Boot,v2,5/6] ARM: DRA7: EMIF: Add 4GB DDR settings   Tom Rini
• [U-Boot] [U-Boot, v2, 6/6] ARM: DRA7-evm: Update memory info in banks   Tom Rini
• [U-Boot] [PATCH v4 4/4] usb: Change power-on / scanning timeout handling   Hans de Goede
• [U-Boot] ARM: DRA72-evm: Update mux and VIRTUAL/MANUAL mode timings   Tom Rini
• [U-Boot] arm64: define _image_binary_end to fix SPL_OF_CONTROL   Tom Rini
• [U-Boot] Please pull : u-boot-video/master   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Jagan Teki
• [U-Boot] [PATCH 0/5] Add QSPI support for LS2080A   Jagan Teki
• [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral   Mugunthan V N
• [U-Boot] [PATCH 01/10] drivers: usb: dwc3: remove devm_zalloc from linux_compact   Mugunthan V N
• [U-Boot] [PATCH 02/10] drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board files to drivers   Mugunthan V N
• [U-Boot] [PATCH 03/10] am437x: board: do not register usb devices when CONFIG_DM_USB is defined   Mugunthan V N
• [U-Boot] [PATCH 04/10] dra7xx: board: do not register usb devices when CONFIG_DM_USB is defined   Mugunthan V N
• [U-Boot] [PATCH 05/10] drivers: usb: dwc3: add ti dwc3 misc driver for wrapper   Mugunthan V N
• [U-Boot] [PATCH 06/10] drivers: usb: common: add support to get maximum speed from dt   Mugunthan V N
• [U-Boot] [PATCH 07/10] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support   Mugunthan V N
• [U-Boot] [PATCH 08/10] am43xx: Add USB device boot support to SPL   Mugunthan V N
• [U-Boot] [PATCH 09/10] configs: am43xx: Add am43xx_evm_usbspl_defconfig   Mugunthan V N
• [U-Boot] [PATCH 10/10] defconfig: am437x_sk_evm: enable usb driver model   Mugunthan V N
• [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property   Adam Ford
• [U-Boot] [PATCH v3 1/4] arm: add missing writes{bwql}, reads{bwql}.   Purna Chandra Mandal
• [U-Boot] [PATCH v3 2/4] drivers: musb-new: remove writes{bwlq} and reads{bwlq}.   Purna Chandra Mandal
• [U-Boot] [PATCH v3 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Purna Chandra Mandal
• [U-Boot] [PATCH v3 4/4] board: pic32mzda: enable USB-host, USB-storage support.   Purna Chandra Mandal
• [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value   Fabio Estevam
• [U-Boot] [PATCH v5 0/4] usb: Reduce USB scanning time   Stefan Roese
• [U-Boot] [PATCH v5 1/4] usb: legacy_hub_port_reset(): Speedup hub reset handling   Stefan Roese
• [U-Boot] [PATCH v5 2/4] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Stefan Roese
• [U-Boot] [PATCH v5 3/4] usb: Don't reset the USB hub a 2nd time   Stefan Roese
• [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling   Hans de Goede
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   Tom Rini
• [U-Boot] [PATCH 01/10] drivers: usb: dwc3: remove devm_zalloc from linux_compact   Tom Rini
• [U-Boot] [PATCH 02/10] drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board files to drivers   Tom Rini
• [U-Boot] [PATCH 03/10] am437x: board: do not register usb devices when CONFIG_DM_USB is defined   Tom Rini
• [U-Boot] [PATCH 04/10] dra7xx: board: do not register usb devices when CONFIG_DM_USB is defined   Tom Rini
• [U-Boot] [PATCH 05/10] drivers: usb: dwc3: add ti dwc3 misc driver for wrapper   Tom Rini
• [U-Boot] [PATCH 06/10] drivers: usb: common: add support to get maximum speed from dt   Tom Rini
• [U-Boot] [PATCH 07/10] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support   Tom Rini
• [U-Boot] [PATCH 08/10] am43xx: Add USB device boot support to SPL   Tom Rini
• [U-Boot] [PATCH 09/10] configs: am43xx: Add am43xx_evm_usbspl_defconfig   Tom Rini
• [U-Boot] [PATCH 10/10] defconfig: am437x_sk_evm: enable usb driver model   Tom Rini
• [U-Boot] [PATCH 1/2] sunxi: Sync dts files with the upstream kernel   Peter Korsgaard
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH 0/3] ARM: keystone2: Cleanup macros   Nishanth Menon
• [U-Boot] [PATCH 1/3] ARM: keystone2: Convert BOOTBITMASK to static inline function   Nishanth Menon
• [U-Boot] [PATCH 2/3] ARM: keystone2: Convert BOOT_READ_BITFIELD into static inline function   Nishanth Menon
• [U-Boot] [PATCH 3/3] ARM: keystone2: Convert BOOT_SET_BITFIELD into static inline function   Nishanth Menon
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stephen Warren
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stephen Warren
• [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling   Stephen Warren
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stefan Roese
• [U-Boot] [PATCH v3 4/4] usb: Change power-on / scanning timeout handling   Stephen Warren
• [U-Boot] [PATCH] x86: Add congatec conga-QA3/E3845-4G (Bail Trail) support   Stefan Roese
• [U-Boot] [PATCH 1/6] spi: kirkwood_spi.c: Add compatible match ID for Armada 375   Stefan Roese
• [U-Boot] [PATCH 2/6] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Stefan Roese
• [U-Boot] [PATCH 3/6] dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4   Stefan Roese
• [U-Boot] [PATCH 4/6] arm: mvebu: Add basic support for the Marvell Armada 375 SoC   Stefan Roese
• [U-Boot] [PATCH 5/6] arm: mvebu: Add basic support for Armada 375 eval board db-88f6720   Stefan Roese
• [U-Boot] [PATCH 6/6] arm: mvebu: Don't enable d-cache on A375   Stefan Roese
• [U-Boot] [PATCH] cmd: Fix license command   Tom Rini
• [U-Boot] [PATCH] sandbox: Enable many more commands   Tom Rini
• [U-Boot] [PATCH 0/5] Enable caches for the RPi2   Alexander Graf
• [U-Boot] [PATCH 1/5] arm64: Add 32bit arm compatible dcache definitions   Alexander Graf
• [U-Boot] [PATCH 2/5] arm: Add support for HYP mode and LPAE page tables   Alexander Graf
• [U-Boot] [PATCH 3/5] lcd: Fix compile warning in 64bit mode   Alexander Graf
• [U-Boot] [PATCH 4/5] RPi: Enable caches for rpi2   Alexander Graf
• [U-Boot] [PATCH 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] sandbox and coverity builds   Tom Rini
• [U-Boot] [PATCH 0/2] ARM: dt: sunxi: Add Itead Ibox support   codekipper at gmail.com
• [U-Boot] [PATCH 1/2] sun7i: Add support for the Itead Ibox   codekipper at gmail.com
• [U-Boot] [PATCH 2/2] sun4i: Convert Iteadunio plus dts   codekipper at gmail.com
• [U-Boot] [PATCH 2/5] arm: Add support for HYP mode and LPAE page tables   Tom Rini
• [U-Boot] [PATCH] efi_loader: Add GOP support   Alexander Graf
• [U-Boot] [PATCH 0/2] ARM: dt: sunxi: Add Itead Ibox support   Code Kipper
• [U-Boot] [PATCH v2 0/2] ARM: dt: sunxi: Add Itead Ibox support   codekipper at gmail.com
• [U-Boot] [PATCH v2 1/2] sun7i: Add support for the Itead Ibox   codekipper at gmail.com
• [U-Boot] [PATCH v2 2/2] sun4i: Convert Iteadunio plus dts   codekipper at gmail.com
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/6] spi: kirkwood_spi.c: Add compatible match ID for Armada 375   Jagan Teki
• [U-Boot] [PATCH] board: ge: bx50v3: Update display setup   Akshay Bhat
• [U-Boot] [PATCH v3 2/4] drivers: musb-new: remove writes{bwlq} and reads{bwlq}.   Marek Vasut
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Cyrille Pitchen
• [U-Boot] [PATCH 01/18] Revert "sf: Fix quad bit set for micron devices"   Cyrille Pitchen
• [U-Boot] [PATCH 02/18] sf: call spi_claim_bus() and spi_release_bus() only once per read, write or erase   Cyrille Pitchen
• [U-Boot] [PATCH 03/18] sf: replace spi_flash_read_common() calls by spi_flash_cmd_read()   Cyrille Pitchen
• [U-Boot] [PATCH 04/18] sf: remove spi_flash_write_common()   Cyrille Pitchen
• [U-Boot] [PATCH 05/18] sf: export spi_flash_wait_ready() function   Cyrille Pitchen
• [U-Boot] [PATCH 06/18] sf: share erase generic algorithm   Cyrille Pitchen
• [U-Boot] [PATCH 07/18] sf: share write generic algorithm   Cyrille Pitchen
• [U-Boot] [PATCH 08/18] sf: share read generic algorithm   Cyrille Pitchen
• [U-Boot] [PATCH 09/18] sf: add hooks to handle register read and write operations   Cyrille Pitchen
• [U-Boot] [PATCH 10/18] sf: move support of SST flash into generic spi_flash_write_alg()   Cyrille Pitchen
• [U-Boot] [PATCH 11/18] sf: fix selection of supported READ commands for QSPI memories   Cyrille Pitchen
• [U-Boot] [PATCH 12/18] sf: fix detection of QSPI memories when they boot in Quad or Dual mode   Cyrille Pitchen
• [U-Boot] [PATCH 13/18] sf: add helper function to set the number of dummy bytes   Cyrille Pitchen
• [U-Boot] [PATCH 14/18] sf: add 4byte address opcodes   Cyrille Pitchen
• [U-Boot] [PATCH 15/18] sf: prepare next fixes to support of QSPI memories by manufacturer   Cyrille Pitchen
• [U-Boot] [PATCH 16/18] sf: fix support of Micron memories   Cyrille Pitchen
• [U-Boot] [PATCH 17/18] ARM: at91: clock: add function to get QSPI clocks   Cyrille Pitchen
• [U-Boot] [PATCH 18/18] sf: add driver for Atmel QSPI controller   Cyrille Pitchen
• [U-Boot] [PATCH v3 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Marek Vasut
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Jagan Teki
• [U-Boot] [PATCH] board: ge: bx50v3: Use pwm for display backlight   Akshay Bhat
• [U-Boot] [PATCH] spi: omap3: Fix multiple definition of 'priv'   Jagan Teki
• [U-Boot] [PATCH] spi: omap3: Fix multiple definition of 'priv'   Jagan Teki
• [U-Boot] [PATCH] spi: omap3: Fix multiple definition of 'priv'   Tom Rini
• [U-Boot] [PATCH 0/2] Fix spelling of "comment", "supported" and "unsupported".   Vagrant Cascadian
• [U-Boot] [PATCH 1/2] Fix spelling of "comment".   Vagrant Cascadian
• [U-Boot] [PATCH 2/2] Fix spelling of "supported/unsupported".   Vagrant Cascadian
• [U-Boot] [PATCH] Fix spelling of "transferred".   Vagrant Cascadian
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Marek Vasut
• [U-Boot] [PATCH] Fix spelling of "transferred".   Marek Vasut
• [U-Boot] spl_mmc: allow to load raw image   Tom Rini
• [U-Boot] [PATCH] Fix spelling of "transferred".   Simon Glass
• [U-Boot] [PATCH 2/2] Fix spelling of "supported/unsupported".   Simon Glass
• [U-Boot] [PATCH v5 0/4] usb: Reduce USB scanning time   Marek Vasut
• [U-Boot] [PATCH 1/2] Fix spelling of "comment".   Tom Rini
• [U-Boot] [PATCH 2/2] Fix spelling of "supported/unsupported".   Tom Rini
• [U-Boot] [PATCH] Fix spelling of "transferred".   Tom Rini
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Tom Rini
• [U-Boot] [PATCH] dm: part: fix missing driver name in debug print   Nishanth Menon
• [U-Boot] [PATCH 3/3] omap4_panda: Convert to config_distro_bootcmd.h   Peter Korsgaard
• [U-Boot] [PATCH] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Tom Rini
• [U-Boot] [PATCH] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Simon Glass
• [U-Boot] [PATCH] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Nishanth Menon
• [U-Boot] [PATCH] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Michal Simek
• [U-Boot] [PATCH v2] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Tom Rini
• [U-Boot] [PATCH 0/7] board: ti: DRA72: Add support for SR2.0 rev C evm   Nishanth Menon
• [U-Boot] [PATCH 1/7] ARM: DRA72x: Add support for detection of SR2.0   Nishanth Menon
• [U-Boot] [PATCH 2/7] ARM: DRA7: hwdata: Update ioreg data for DRA72 SR2.0   Nishanth Menon
• [U-Boot] [PATCH 3/7] ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0   Nishanth Menon
• [U-Boot] [PATCH 4/7] board: ti: DRA72: revC evm: Update sdram timing configuration for SR2.0   Nishanth Menon
• [U-Boot] [PATCH 5/7] ARM: OMAP5/DRA7: Split iodelay functionality into sub steps   Nishanth Menon
• [U-Boot] [PATCH 6/7] ARM: OMAP5/DRA7: Expose do_set_iodelay   Nishanth Menon
• [U-Boot] [PATCH 7/7] board: ti: DRA7: Add DRA72-rev C evm pinmux   Nishanth Menon
• [U-Boot] [PATCH v2] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Michal Simek
• [U-Boot] [PATCH v2] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Tom Rini
• [U-Boot] [PATCH v2] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Michal Simek
• [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Tom Rini
• [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Tom Rini
• [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_*   Michal Simek
• [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value   Peng Fan
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [RFC 1/2] mmc: introduce mmc_power_init and pwrup hook function   Peng Fan
• [U-Boot] [RFC 2/2] dm: mmc: implement pwrup function   Peng Fan
• [U-Boot] [PATCH] x86: Add congatec conga-QA3/E3845-4G (Bail Trail) support   Bin Meng
• [U-Boot] [PATCH v5 1/4] usb: legacy_hub_port_reset(): Speedup hub reset handling   Bin Meng
• [U-Boot] [PATCH v5 2/4] usb: Remove 200 ms delay in usb_hub_port_connect_change()   Bin Meng
• [U-Boot] [PATCH v5 3/4] usb: Don't reset the USB hub a 2nd time   Bin Meng
• [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling   Bin Meng
• [U-Boot] [PATCH v5 0/4] usb: Reduce USB scanning time   Bin Meng
• [U-Boot] [PATCH v2] serial: pl01x: Add support for devices with the rate pre-configured.   Stephen Warren
• [U-Boot] [PATCH v2] spl_mmc: allow to load raw image   Masahiro Yamada
• [U-Boot] spl_mmc: allow to load raw image   Masahiro Yamada
• [U-Boot] [PATCH v5 0/4] usb: Reduce USB scanning time   Simon Glass
• [U-Boot] [PATCH] sandbox: Enable many more commands   Simon Glass
• [U-Boot] [PATCH 2/2] dm: gpio: mxc: implement xlate function   Simon Glass
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Qianyu Gong
• [U-Boot] [PATCH 0/7] board: ti: DRA72: Add support for SR2.0 rev C evm   Lokesh Vutla
• [U-Boot] [PATCH 1/3] armv8/ls1043: Add workaround for DDR erratum A-008850   Shengzhou Liu
• [U-Boot] [PATCH 2/3] drivers/ddr/fsl: update workaround for erratum A-008511   Shengzhou Liu
• [U-Boot] [PATCH 3/3] driver/ddr/fsl: Add workaround for erratum A-009801   Shengzhou Liu
• [U-Boot] [PATCH] x86: Add congatec conga-QA3/E3845-4G (Bail Trail) support   Stefan Roese
• [U-Boot] [PATCH v3 2/4] drivers: musb-new: remove writes{bwlq} and reads{bwlq}.   Purna Chandra Mandal
• [U-Boot] [PATCH 3/9] ARM: ARMv7: PSCI: move target PC in each CPU stack no longer is shared   Chenhui Zhao
• [U-Boot] [PATCH] x86: Add congatec conga-QA3/E3845-4G (Bail Trail) support   Bin Meng
• [U-Boot] [PATCH] x86: Add congatec conga-QA3/E3845-4G (Bail Trail) support   Bin Meng
• [U-Boot] [PATCH v2] x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support   Stefan Roese
• [U-Boot] [PATCH v2] x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support   Bin Meng
• [U-Boot] [PATCH 0/3] Update gdsys board support   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH 1/3] strider: Add DP501 support for cpu model   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH 2/3] strider: Define pca593x widths   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH 3/3] strider: use optimised bus timing for FPGA access   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH 3/9] ARM: ARMv7: PSCI: move target PC in each CPU stack no longer is shared   Hongbo Zhang
• [U-Boot] [PATCH 3/9] ARM: ARMv7: PSCI: move target PC in each CPU stack no longer is shared   Wang Dongsheng
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH 2/5] arm: Add support for HYP mode and LPAE page tables   Alexander Graf
• [U-Boot] [PATCH] dm: device.c: Minor coding-style fix   Stefan Roese
• [U-Boot] [PATCH v8 0/9] add support for atheros ath79 based SOCs   Wills Wang
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Wills Wang
• [U-Boot] [PATCH v8 2/9] mips: ath79: add support for AR933x SOCs   Wills Wang
• [U-Boot] [PATCH v8 3/9] mips: ath79: add support for QCA953x SOCs   Wills Wang
• [U-Boot] [PATCH v8 4/9] drivers: pinctrl: Add simple pinctrl driver for QCA/Athores ar933x.   Wills Wang
• [U-Boot] [PATCH v8 5/9] drivers: pinctrl: Add simple pinctrl driver for QCA/Athores qca953x.   Wills Wang
• [U-Boot] [PATCH v8 6/9] drivers: serial: add serial driver for ar933x SOC   Wills Wang
• [U-Boot] [PATCH v8 7/9] drivers: spi: add spi support for QCA/Atheros ath79 SOCs   Wills Wang
• [U-Boot] [PATCH v8 8/9] mips: ath79: add AP121 reference board   Wills Wang
• [U-Boot] [PATCH v8 9/9] mips: ath79: add AP143 reference board   Wills Wang
• [U-Boot] [PATCH] dm: device.c: Minor coding-style fix   Bin Meng
• [U-Boot] [PATCH v3 4/4] board: pic32mzda: enable USB-host, USB-storage support.   Daniel Schwierzeck
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH v3 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Purna Chandra Mandal
• [U-Boot] [PATCH] armv8: fsl-layerscape: don't reconfigure QSPI clock when booting from QSPI   Gong Qianyu
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] [PATCH 1/2] doc: driver-model: Update dm tests run using test.py   Jagan Teki
• [U-Boot] [PATCH 2/2] board: README.sandbox: Update dm test command   Jagan Teki
• [U-Boot] [PATCH] include/dt-bindings: Sync some files with the kernel   Hans de Goede
• [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value   Fabio Estevam
• [U-Boot] [PATCH v1 1/1] fastboot: Update getvar command to get 'userdata' partition size   Boris Brezillon
• [U-Boot] sunxi: Support SID e-fuses on A83T and H3   Hans de Goede
• [U-Boot] [PATCH 2/2] Fix spelling of "supported/unsupported".   Peter Griffin
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Cyrille Pitchen
• [U-Boot] [PATCH v3 00/10] x86: Add support for samus   Simon Glass
• [U-Boot] [PATCH v3 01/10] arm: Add a 64-bit division routine to the private library   Simon Glass
• [U-Boot] [PATCH v3 02/10] dhry: Correct dhrystone calculation for fast machines   Simon Glass
• [U-Boot] [PATCH v3 03/10] x86: Move common PCH code into a common place   Simon Glass
• [U-Boot] [PATCH v3 04/10] x86: Add common SDRAM-init code   Simon Glass
• [U-Boot] [PATCH v3 05/10] x86: ivybridge: Convert to use the common SDRAM code   Simon Glass
• [U-Boot] [PATCH v3 06/10] x86: dts: Drop memory SPD compatible string   Simon Glass
• [U-Boot] [PATCH v3 07/10] x86: Support a chained-boot development flow   Simon Glass
• [U-Boot] [PATCH v3 08/10] x86: broadwell: Add missing pci.h header in power_state.c   Simon Glass
• [U-Boot] [PATCH v3 09/10] x86: Add missing pci.h header in me_common.h   Simon Glass
• [U-Boot] [PATCH v3 10/10] x86: Add support for the samus chromebook   Simon Glass
• [U-Boot] [PATCH 00/14] dm: Fix various issues reported by coverity   Simon Glass
• [U-Boot] [PATCH 01/14] mkimage: Fix munmap() call when importing data   Simon Glass
• [U-Boot] [PATCH 02/14] mkimage: Correct file being closed twice in fit_import_data()   Simon Glass
• [U-Boot] [PATCH 03/14] mkimage: Correct file being closed twice in fit_extract_data()   Simon Glass
• [U-Boot] [PATCH 04/14] part_iso: Drop the customer unaligned access functions   Simon Glass
• [U-Boot] [PATCH 05/14] part_efi: Drop the NULL check on dev_desc in part_print_efi()   Simon Glass
• [U-Boot] [PATCH 06/14] part_efi: Drop NULL check in part_get_info_efi()   Simon Glass
• [U-Boot] [PATCH 07/14] mkimage: Close the file when unable to get its size   Simon Glass
• [U-Boot] [PATCH 08/14] mkimage: Add a missing free() to fit_import_data()   Simon Glass
• [U-Boot] [PATCH 09/14] mkimage: Fix error path in fit_extract_data()   Simon Glass
• [U-Boot] [PATCH 10/14] mkimage: Fix missing free() in fit_extract_data()   Simon Glass
• [U-Boot] [PATCH 11/14] mkimage: Fix missing free() and close() in fit_build()   Simon Glass
• [U-Boot] [PATCH 12/14] mkimage: Ensure file is closed in fdt_property_file()   Simon Glass
• [U-Boot] [PATCH 13/14] mkimage: Don't close the file if it wasn't opened   Simon Glass
• [U-Boot] [PATCH 14/14] usb: Correct return value in usb_stor_info()   Simon Glass
• [U-Boot] [PATCH] mx6sabresd: Use VESA 1024x768 timings   Fabio Estevam
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Jagan Teki
• [U-Boot] sunxi: video: Configure only LVDS pins instead of all LCD pins when LVDS interface selected   Hans de Goede
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH] sunxi: Enable realtek phy support   Hans de Goede
• [U-Boot] [PATCH] include/dt-bindings: Sync some files with the kernel   Tom Rini
• [U-Boot] [PATCH 1/7] ARM: DRA72x: Add support for detection of SR2.0   Tom Rini
• [U-Boot] [PATCH 2/7] ARM: DRA7: hwdata: Update ioreg data for DRA72 SR2.0   Tom Rini
• [U-Boot] [PATCH 3/7] ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0   Tom Rini
• [U-Boot] [PATCH 4/7] board: ti: DRA72: revC evm: Update sdram timing configuration for SR2.0   Tom Rini
• [U-Boot] [PATCH 5/7] ARM: OMAP5/DRA7: Split iodelay functionality into sub steps   Tom Rini
• [U-Boot] [PATCH 6/7] ARM: OMAP5/DRA7: Expose do_set_iodelay   Tom Rini
• [U-Boot] [PATCH 7/7] board: ti: DRA7: Add DRA72-rev C evm pinmux   Tom Rini
• [U-Boot] [PATCH v2] spl_mmc: allow to load raw image   Tom Rini
• [U-Boot] [PATCH] sunxi: fix DCDC2 output in CHIP_defconfig   Hans de Goede
• [U-Boot] [PATCH 2/5] arm: Add support for HYP mode and LPAE page tables   Tom Rini
• [U-Boot] [PATCH] sunxi: chip: enable composite video out   Hans de Goede
• [U-Boot] [PATCH] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Jagan Teki
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Jagan Teki
• [U-Boot] [PATCH v2 0/5] Enable caches for the RPi2   Alexander Graf
• [U-Boot] [PATCH v2 1/5] arm64: Add 32bit arm compatible dcache definitions   Alexander Graf
• [U-Boot] [PATCH v2 2/5] arm: Add support for HYP mode and LPAE page tables   Alexander Graf
• [U-Boot] [PATCH v2 3/5] lcd: Fix compile warning in 64bit mode   Alexander Graf
• [U-Boot] [PATCH v2 4/5] RPi: Enable caches for rpi2   Alexander Graf
• [U-Boot] [PATCH v2 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] [linux-sunxi] [PATCH v2 1/2] sun7i: Add support for the Itead Ibox   Hans de Goede
• [U-Boot] [PATCH 1/6] ARM: keystone2: Split monitor code / command code   Tom Rini
• [U-Boot] [PATCH 2/6] ARM: keystone2: Switch to using the poweroff command   Tom Rini
• [U-Boot] [PATCH 3/6] ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds   Tom Rini
• [U-Boot] [PATCH 4/6] cmd: scsi: Group the command portion together, guard with !CONFIG_SPL_BUILD   Tom Rini
• [U-Boot] [PATCH 5/6] lpc32xx: work_92105: Rework Makefile   Tom Rini
• [U-Boot] [PATCH 6/6] arm: omap-common: Guard some parts of the code with CONFIG_OMAP44XX/OMAP54XX   Tom Rini
• [U-Boot] [PATCH 1/3] armv8/ls1043: Add workaround for DDR erratum A-008850   york sun
• [U-Boot] [PATCH] sunxi: Enable realtek phy support   Ian Campbell
• [U-Boot] [PATCH] include/dt-bindings: Sync some files with the kernel   Ian Campbell
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Stephen Warren
• [U-Boot] [PATCH v3 2/4] drivers: musb-new: remove writes{bwlq} and reads{bwlq}.   Marek Vasut
• [U-Boot] [PATCH v3 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Marek Vasut
• [U-Boot] [PATCH v3 4/4] board: pic32mzda: enable USB-host, USB-storage support.   Marek Vasut
• [U-Boot] [PATCH 14/14] usb: Correct return value in usb_stor_info()   Marek Vasut
• [U-Boot] mx6sabresd: Use VESA 1024x768 timings   Soeren Moch
• [U-Boot] [PATCH v8 0/9] add support for atheros ath79 based SOCs   Marek Vasut
• [U-Boot] [PATCH v2] mx6sabresd: Use VESA 1024x768 timings   Fabio Estevam
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent   Michal Simek
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] doc: driver-model: Update dm tests run using test.py   Stephen Warren
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Cyrille Pitchen
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Jagan Teki
• [U-Boot] [PATCH 1/4] rework board config files   Cyrille Pitchen
• [U-Boot] [PATCH 2/4] sama5d2_xplained: add support of QSPI controllers   Cyrille Pitchen
• [U-Boot] [PATCH 3/4] dts: add dts file for Atmel sama5d2 xplained board   Cyrille Pitchen
• [U-Boot] [PATCH 4/4] sf: fix sf probe   Cyrille Pitchen
• [U-Boot] [PATCH 1/6] ARM: keystone2: Split monitor code / command code   Albert ARIBAUD
• [U-Boot] [PATCH] Fix typo in chosen parameter in vf610-twr.dts.   Alexander Merkle
• [U-Boot] mx6sabresd: Use VESA 1024x768 timings   Fabio Estevam
• [U-Boot] [PATCH 1/5] arm64: Add 32bit arm compatible dcache definitions   Andreas Färber
• [U-Boot] [PATCH 5/5] bcm2835 video: Map fb as cached   Andreas Färber
• [U-Boot] ext4 and caching   Eric Nelson
• [U-Boot] [PATCH 1/6] ARM: keystone2: Split monitor code / command code   Tom Rini
• [U-Boot] [PATCH 1/3] sunxi: Fix clock_twi_onoff for sun6i   Hans de Goede
• [U-Boot] [PATCH 2/3] sunxi: Fix clock_twi_onoff for sun8i-a83   Hans de Goede
• [U-Boot] [PATCH 3/3] sunxi: Fix clock_twi_onoff for sun9i   Hans de Goede
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Marek Vasut
• [U-Boot] [PATCH v8 2/9] mips: ath79: add support for AR933x SOCs   Marek Vasut
• [U-Boot] [PATCH v8 3/9] mips: ath79: add support for QCA953x SOCs   Marek Vasut
• [U-Boot] [RFC PATCH 0/2] simple cache layer for block devices   Eric Nelson
• [U-Boot] [RFC PATCH 1/2] add block device cache   Eric Nelson
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PATCH 1/5] arm64: Add 32bit arm compatible dcache definitions   Alexander Graf
• [U-Boot] [PATCH 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent   David Gibson
• [U-Boot] [PATCH] mvebu: ds414: Move cmd_syno into ds414 directory   Tom Rini
• [U-Boot] [PATCH] fdt: Try to read #address-cells/size-cells from parent   Michal Simek
• [U-Boot] [PATCH] arm: clang: Update support slightly   Tom Rini
• [U-Boot] [PATCH] doc/README.clang: Document sandbox instructions   Tom Rini
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Huan Wang
• [U-Boot] [PATCH] Fix typo in chosen parameter in vf610-twr.dts.   Bin Meng
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH v3 03/10] x86: Move common PCH code into a common place   Bin Meng
• [U-Boot] [PATCH v3 07/10] x86: Support a chained-boot development flow   Bin Meng
• [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value   Peng Fan
• [U-Boot] EFI loader support largely enabled   Tom Rini
• [U-Boot] [PATCH 1/6] ARM: keystone2: Split monitor code / command code   Tom Rini
• [U-Boot] [PATCH 2/6] ARM: keystone2: Switch to using the poweroff command   Tom Rini
• [U-Boot] [PATCH 3/6] ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds   Tom Rini
• [U-Boot] [PATCH 4/6] cmd: scsi: Group the command portion together, guard with !CONFIG_SPL_BUILD   Tom Rini
• [U-Boot] [PATCH 5/6] lpc32xx: work_92105: Rework Makefile   Tom Rini
• [U-Boot] [PATCH 6/6] arm: omap-common: Guard some parts of the code with CONFIG_OMAP44XX/OMAP54XX   Tom Rini
• [U-Boot] [U-Boot,1/4] omap3: String-based reboot mode handling   Tom Rini
• [U-Boot] [U-Boot, 2/4] omap3: Use a define for reboot reason offset   Tom Rini
• [U-Boot] [U-Boot,3/4] sniper: Get rid of reset_misc   Tom Rini
• [U-Boot] [U-Boot, 4/4] sniper: Clear reboot mode garbage on cold reset   Tom Rini
• [U-Boot] [U-Boot, 01/27] power: twl6030: Some more explicit registers and values definitions   Tom Rini
• [U-Boot] [U-Boot, 02/27] power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 value   Tom Rini
• [U-Boot] [U-Boot, 03/27] power: twl6030: Device-index-specific MMC power initialization   Tom Rini
• [U-Boot] [U-Boot, 04/27] omap_hsmmc: Board-specific TWL6030 MMC power initialization   Tom Rini
• [U-Boot] [U-Boot, 05/27] omap4: Export elpidia sdram device details   Tom Rini
• [U-Boot] [U-Boot,06/27] omap4: Export elpidia sdram timings   Tom Rini
• [U-Boot] [U-Boot,07/27] omap4: Export jedec sdram timings   Tom Rini
• [U-Boot] [U-Boot, 08/27] omap-common: Rename set_muxconf_regs_essential to set_muxconf_regs   Tom Rini
• [U-Boot] [U-Boot, 09/27] omap-common: Remove deprecated arch_cpu_init code   Tom Rini
• [U-Boot] [U-Boot, 10/27] omap4: Remove duplicate CM_L3INIT_USBPHY_CLKCTRL reference and whitespace   Tom Rini
• [U-Boot] [U-Boot, 11/27] omap4: Move i2c clocks enable to enable_basic_clocks   Tom Rini
• [U-Boot] [U-Boot, 12/27] Amazon Kindle Fire (first generation) codename kc1 support   Tom Rini
• [U-Boot] [U-Boot, 13/27] omap-common: clocks-common: Setup USB DPLL when MUSB is in use   Tom Rini
• [U-Boot] [U-Boot,14/27] omap4: Properly enable USB PHY clocks   Tom Rini
• [U-Boot] [U-Boot, 15/27] power: twl6030: Configure VUSB voltage on USB device setup   Tom Rini
• [U-Boot] [U-Boot, 16/27] power: twl6030: Clear VUSB_IN_PMID bit on USB device setup   Tom Rini
• [U-Boot] [U-Boot, 17/27] usb: musb-new: omap2430: OMAP4 MUSB USB controller support   Tom Rini
• [U-Boot] [U-Boot, 18/27] kc1: MUSB USB controller and fastboot USB gadget support   Tom Rini
• [U-Boot] [U-Boot,19/27] omap4: Reboot mode support   Tom Rini
• [U-Boot] [U-Boot, 20/27] omap4: Check warm reset for reboot mode validity   Tom Rini
• [U-Boot] [U-Boot,21/27] kc1: OMAP4 reboot mode support   Tom Rini
• [U-Boot] [U-Boot, 22/27] kc1: Boot to bootloader (fastboot) on ID pin pull-up   Tom Rini
• [U-Boot] [U-Boot, 23/27] power: twl6030: Remove ifdef around the code   Tom Rini
• [U-Boot] [U-Boot,24/27] power: twl6030: Power off support   Tom Rini
• [U-Boot] [U-Boot, 25/27] input: TWL6030 input support for power button, USB and charger   Tom Rini
• [U-Boot] [U-Boot, 26/27] kc1: Power off when the power on reason is not a valid one   Tom Rini
• [U-Boot] [U-Boot, 27/27] kc1: Clear reboot mode garbage on cold reset   Tom Rini
• [U-Boot] [U-Boot,v5,01/30] thunderx: Calculate TCR dynamically   Tom Rini
• [U-Boot] [U-Boot,v5,02/30] arm64: Disable TTBR1 maps in EL1   Tom Rini
• [U-Boot] [U-Boot, v5, 03/30] arm64: Make full va map code more dynamic   Tom Rini
• [U-Boot] [U-Boot, v5, 04/30] thunderx: Move mmu table into board file   Tom Rini
• [U-Boot] [U-Boot, v5, 05/30] zymqmp: Replace home grown mmu code with generic table approach   Tom Rini
• [U-Boot] [U-Boot, v5, 06/30] tegra: Replace home grown mmu code with generic table approach   Tom Rini
• [U-Boot] [U-Boot,v5,07/30] vexpress64: Add MMU tables   Tom Rini
• [U-Boot] [U-Boot,v5,08/30] dwmmc: Increase retry timeout   Tom Rini
• [U-Boot] [U-Boot,v5,09/30] hikey: Add MMU tables   Tom Rini
• [U-Boot] [U-Boot,v5,10/30] arm64: Remove non-full-va map code   Tom Rini
• [U-Boot] [U-Boot, v5, 11/30] arm64: Only allow dcache disabled in SPL builds   Tom Rini
• [U-Boot] [U-Boot, v5, 12/30] disk/part.c: Expose list of available block drivers   Tom Rini
• [U-Boot] [U-Boot, v5, 13/30] include/efi_api.h: Add more detailed API definitions   Tom Rini
• [U-Boot] [U-Boot,v5,14/30] efi_loader: Add PE image loader   Tom Rini
• [U-Boot] [U-Boot,v5,15/30] efi_loader: Add boot time services   Tom Rini
• [U-Boot] [U-Boot,v5,16/30] efi_loader: Add console interface   Tom Rini
• [U-Boot] [U-Boot,v5,17/30] efi_loader: Add runtime services   Tom Rini
• [U-Boot] [U-Boot,v5,18/30] efi_loader: Add disk interfaces   Tom Rini
• [U-Boot] [U-Boot,v6,19/30] efi_loader: Add "bootefi" command   Tom Rini
• [U-Boot] [U-Boot, v5, 20/30] efi_loader: Implement memory allocation and map   Tom Rini
• [U-Boot] [U-Boot,v5,21/30] arm64: Allow exceptions to return   Tom Rini
• [U-Boot] [U-Boot, v5, 22/30] arm64: Allow EFI payload code to take exceptions   Tom Rini
• [U-Boot] [U-Boot, v5, 23/30] efi_loader: hook up in build environment   Tom Rini
• [U-Boot] [U-Boot, v6, 24/30] efi_loader: Add distro boot script for removable media   Tom Rini
• [U-Boot] [U-Boot, v5, 25/30] efi_loader: Add README section in README.efi   Tom Rini
• [U-Boot] [U-Boot,v5,26/30] efi_loader: Add MAINTAINERS entry   Tom Rini
• [U-Boot] [U-Boot, v5, 27/30] arm64: Replace fdt_name env variables with fdtfile   Tom Rini
• [U-Boot] [U-Boot, v5, 28/30] arm: Allow EFI payload code to take exceptions   Tom Rini
• [U-Boot] [U-Boot, v5, 29/30] efi_loader: Call fdt preparation functions   Tom Rini
• [U-Boot] [U-Boot, v5, 30/30] efi_loader: Pass proper device path in on boot   Tom Rini
• [U-Boot] [U-Boot, 01/10] ti_armv7_keystone2: configs: add usb mass storage support   Tom Rini
• [U-Boot] [U-Boot, 02/10] ti_armv7_keystone2: env: Update UBIFS image paths   Tom Rini
• [U-Boot] [U-Boot, 03/10] ti_armv7_keystone2: env: Remove securedb.key.bin load   Tom Rini
• [U-Boot] [U-Boot, 04/10] am335x: configs: Fix usb ether boot support   Tom Rini
• [U-Boot] [U-Boot, 05/10] am43xx: configs: Enable USB commands for non usb boot also   Tom Rini
• [U-Boot] [U-Boot, 06/10] ti_armv7_common: env: Consolidate support for loading script and text env files   Tom Rini
• [U-Boot] [U-Boot, 07/10] k2g: env: Allow use of a script and plain text env files   Tom Rini
• [U-Boot] [U-Boot, 08/10] k2g: configs: Add support to save env in MMC   Tom Rini
• [U-Boot] [U-Boot, 09/10] keystone2: env: add env script for booting with an initramfs with firmware   Tom Rini
• [U-Boot] [U-Boot, 10/10] keystone2: env: Set mmc as default boot for k2g-evm   Tom Rini
• [U-Boot] ARM: DRA7: DDR: Enable SR in Power Management Control   Tom Rini
• [U-Boot] spl_mmc: allow to load raw image   Tom Rini
• [U-Boot] spl_nor: fix warning when compiled for 64bit target   Tom Rini
• [U-Boot] [U-Boot, v2] ti_armv7_common: env: Add NFS loading support to default enviroment   Tom Rini
• [U-Boot] [U-Boot,v2] ARM: DRA7xx: Enable NFS boot command   Tom Rini
• [U-Boot] [PATCH] mvebu: ds414: Move cmd_syno into ds414 directory   Tom Rini
• [U-Boot] [PATCH 01/14] mkimage: Fix munmap() call when importing data   Tom Rini
• [U-Boot] [PATCH 02/14] mkimage: Correct file being closed twice in fit_import_data()   Tom Rini
• [U-Boot] [PATCH 03/14] mkimage: Correct file being closed twice in fit_extract_data()   Tom Rini
• [U-Boot] fdt problem   Peng Fan
• [U-Boot] [PATCH 04/14] part_iso: Drop the customer unaligned access functions   Tom Rini
• [U-Boot] [PATCH 05/14] part_efi: Drop the NULL check on dev_desc in part_print_efi()   Tom Rini
• [U-Boot] [PATCH 06/14] part_efi: Drop NULL check in part_get_info_efi()   Tom Rini
• [U-Boot] [PATCH 07/14] mkimage: Close the file when unable to get its size   Tom Rini
• [U-Boot] [PATCH 08/14] mkimage: Add a missing free() to fit_import_data()   Tom Rini
• [U-Boot] [PATCH 09/14] mkimage: Fix error path in fit_extract_data()   Tom Rini
• [U-Boot] [PATCH 10/14] mkimage: Fix missing free() in fit_extract_data()   Tom Rini
• [U-Boot] [PATCH 11/14] mkimage: Fix missing free() and close() in fit_build()   Tom Rini
• [U-Boot] [PATCH 12/14] mkimage: Ensure file is closed in fdt_property_file()   Tom Rini
• [U-Boot] [PATCH 13/14] mkimage: Don't close the file if it wasn't opened   Tom Rini
• [U-Boot] [PATCH 14/14] usb: Correct return value in usb_stor_info()   Tom Rini
• [U-Boot] [PATCH 1/3] ARM: keystone2: Convert BOOTBITMASK to static inline function   Tom Rini
• [U-Boot] [PATCH 2/3] ARM: keystone2: Convert BOOT_READ_BITFIELD into static inline function   Tom Rini
• [U-Boot] [PATCH 3/3] ARM: keystone2: Convert BOOT_SET_BITFIELD into static inline function   Tom Rini
• [U-Boot] [PATCH v3 01/10] arm: Add a 64-bit division routine to the private library   Bin Meng
• [U-Boot] [PATCH v3 02/10] dhry: Correct dhrystone calculation for fast machines   Bin Meng
• [U-Boot] [PATCH v3 03/10] x86: Move common PCH code into a common place   Bin Meng
• [U-Boot] [PATCH v3 04/10] x86: Add common SDRAM-init code   Bin Meng
• [U-Boot] [PATCH v3 05/10] x86: ivybridge: Convert to use the common SDRAM code   Bin Meng
• [U-Boot] [PATCH v3 06/10] x86: dts: Drop memory SPD compatible string   Bin Meng
• [U-Boot] [PATCH v3 07/10] x86: Support a chained-boot development flow   Bin Meng
• [U-Boot] [PATCH v3 08/10] x86: broadwell: Add missing pci.h header in power_state.c   Bin Meng
• [U-Boot] [PATCH v3 09/10] x86: Add missing pci.h header in me_common.h   Bin Meng
• [U-Boot] [PATCH v3 10/10] x86: Add support for the samus chromebook   Bin Meng
• [U-Boot] [PATCH v2] x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH v8 3/9] mips: ath79: add support for QCA953x SOCs   Wills Wang
• [U-Boot] [PATCH v8 2/9] mips: ath79: add support for AR933x SOCs   Wills Wang
• [U-Boot] [PATCH v8 3/9] mips: ath79: add support for QCA953x SOCs   Marek Vasut
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Wills Wang
• [U-Boot] [PATCH 1/2] ARM: bcm283x: don't always define CONFIG_BCM2835   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: bcm2835: fix 64-bit build warning in mbox   Stephen Warren
• [U-Boot] [PATCH] mmc: bcm2835: fix 64-bit build warning   Stephen Warren
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Marek Vasut
• [U-Boot] [PATCH] serial: add BCM283x mini UART driver   Stephen Warren
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Wills Wang
• [U-Boot] [PATCH v2 0/5] Enable caches for the RPi2   Stephen Warren
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH v2 0/5] Enable caches for the RPi2   Alexander Graf
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Jagan Teki
• [U-Boot] [PATCH v2 1/2] doc: driver-model: Update dm tests run using test.py   Jagan Teki
• [U-Boot] [PATCH v2 2/2] board: README.sandbox: Update dm test command   Jagan Teki
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/5] Enable caches for the RPi2   Alexander Graf
• [U-Boot] difference between ft_board_setup() and ft_system_setup()   Hannes Schmelzer
• [U-Boot] [PATCH 1/3] sunxi: Fix clock_twi_onoff for sun6i   Ian Campbell
• [U-Boot] [PATCH v3 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Purna Chandra Mandal
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH v3 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Marek Vasut
• [U-Boot] [v2] armv8: fsl-layerscape: Updating entries in Serdes Table   Pratiyush Mohan Srivastava
• [U-Boot] [PATCH v1 1/1] fastboot: Update getvar command to get 'userdata' partition size   Rob Herring
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Marek Vasut
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Wills Wang
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Marek Vasut
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Daniel Schwierzeck
• [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs   Marek Vasut
• [U-Boot] [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer being called   Hans de Goede
• [U-Boot] [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer being called   Ian Campbell
• [U-Boot] [PATCH] sun7i: Add support for the Itead Core EVB   codekipper at gmail.com
• [U-Boot] [PATCH] sun7i: Add support for the Itead Core EVB   Code Kipper
• [U-Boot] [PATCH] image-fit: Change FIT prefix for configurations   Sáreník Ján
• [U-Boot] [PATCH] image-fit: Change FIT prefix for configurations   Sáreník Ján
• [U-Boot] [PATCH] bootp: Prevent u-boot from using others bootp responses.   Anton Persson
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH] cmd_dhry.c: Use lldiv for vax_mips calculation as well   Tom Rini
• [U-Boot] [PATCH] cmd_dhry.c: Use lldiv for vax_mips calculation as well   Tom Rini
• [U-Boot] [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer being called   Hans de Goede
• [U-Boot] [PATCH 0/3] Fix multipe typos "choosen" instead of "chosen" in dts/code   Alexander Merkle
• [U-Boot] [PATCH 1/3] Fix typo in chosen parameter in vf610-twr.dts   Alexander Merkle
• [U-Boot] [PATCH 2/3] Fix typo in chosen parameter of pcm052.dts   Alexander Merkle
• [U-Boot] [PATCH 3/3] Fix typo choosen in comments and printf logs   Alexander Merkle
• [U-Boot] [PATCH 0/3] Fix multipe typos "choosen" instead of "chosen" in dts/code   Bhuvanchandra DV
• [U-Boot] [PATCH 0/3] Fix multipe typos "choosen" instead of "chosen" in dts/code   Alexander Merkle
• [U-Boot] [PATCH 0/3] Fix multipe typos "choosen" instead of "chosen" in dts/code   Bhuvanchandra DV
• [U-Boot] [PATCH 1/2] ARM: bcm283x: don't always define CONFIG_BCM2835   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: bcm2835: fix 64-bit build warning in mbox   Tom Rini
• [U-Boot] spl_mmc: allow to load raw image   Masahiro Yamada
• [U-Boot] spl_mmc: allow to load raw image   Tom Rini
• [U-Boot] buildman: arm: undefined reference to `__aeabi_ldivmod'   Stephen Warren
• [U-Boot] [PATCH] fastboot: allow retrieving fastboot variables from env   Boris Brezillon
• [U-Boot] [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer being called   Ian Campbell
• [U-Boot] [PATCH] fastboot: allow retrieving fastboot variables from env   Boris Brezillon
• [U-Boot] can't change stdin and stdout environment   Ran Shalit
• [U-Boot] [PATCH 1/2] ARM: bcm283x: don't always define CONFIG_BCM2835   Stephen Warren
• [U-Boot] mtd; spi-nor: Probing dual uclass drivers from cmd   Jagan Teki
• [U-Boot] [PATCH 1/2] ARM: bcm283x: don't always define CONFIG_BCM2835   Tom Rini
• [U-Boot] mx6sabresd: Use VESA 1024x768 timings   Soeren Moch
• [U-Boot] [v2] armv8: fsl-layerscape: Updating entries in Serdes Table   york sun
• [U-Boot] [PATCHv2 2/3] ARMv8/layerscape: Add FSL PPA support   york sun
• [U-Boot] [RFC PATCH 1/2] add block device cache   Stephen Warren
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Stephen Warren
• [U-Boot] [RFC PATCH 1/2] add block device cache   Eric Nelson
• [U-Boot] [RFC PATCH 1/2] add block device cache   Stephen Warren
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH 1/3] Fix typo in chosen parameter in vf610-twr.dts   Bin Meng
• [U-Boot] [PATCH 2/3] Fix typo in chosen parameter of pcm052.dts   Bin Meng
• [U-Boot] [PATCH 3/3] Fix typo choosen in comments and printf logs   Bin Meng
• [U-Boot] mmc issue on driving a high speed SD   Damien Wei Huang
• [U-Boot] [PATCH 1/2] mmc: Fix switch..case indention   Bin Meng
• [U-Boot] [PATCH 2/2] mmc: Print send_cmd response only when return value is not zero   Bin Meng
• [U-Boot] [PATCH v2 1/2] mmc: Fix switch..case indention   Bin Meng
• [U-Boot] [PATCH v2 2/2] mmc: Print send_cmd response only when return value is zero   Bin Meng
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v4 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] [PATCH v4 4/4] drivers:usb:common:fsl-dt-fixup: fix fdt_usb_get_node_type() to return error code   Sriram Dash
• [U-Boot] [PATCH] net: rtl8169: Fix build error when DEBUG is on   Bin Meng
• [U-Boot] [PATCH 1/2] efi_stub: Move carriage return before line feed in putc()   Bin Meng
• [U-Boot] [PATCH 2/2] debug_uart: Remove duplicated carriage return handling   Bin Meng
• [U-Boot] [U-Boot v3] usb: xhci: Fix vendor command error if the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION.   Anand Moon
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH 00/13] ARM: uniphier: bulk changes for v2016.05-rc1   Masahiro Yamada
• [U-Boot] [PATCH 01/13] ARM: dts: uniphier: add device tree for Micro Support Card   Masahiro Yamada
• [U-Boot] [PATCH 02/13] ARM: uniphier: remove commented out define   Masahiro Yamada
• [U-Boot] [PATCH 03/13] ARM: uniphier: fix bogus comment   Masahiro Yamada
• [U-Boot] [PATCH 04/13] ARM: uniphier: drop PH1- prefix from CONFIG options and file names   Masahiro Yamada
• [U-Boot] [PATCH 05/13] ARM: uniphier: refactor SBC init code   Masahiro Yamada
• [U-Boot] [PATCH 06/13] ARM: uniphier: drop ifdef in ddrphy-regs.h   Masahiro Yamada
• [U-Boot] [PATCH 07/13] ARM: uniphier: add work-around to support Micro Support Card v3.6.10   Masahiro Yamada
• [U-Boot] [PATCH 08/13] ARM: uniphier: enable DDR PHY parameter dump commands by default   Masahiro Yamada
• [U-Boot] [PATCH 09/13] ARM: dts: uniphier: add PH1-LD20 SoC/board device tree sources   Masahiro Yamada
• [U-Boot] [PATCH 10/13] ARM: dts: uniphier: add PH1-LD11 SoC/board device tree sources   Masahiro Yamada
• [U-Boot] [PATCH 11/13] ARM: uniphier: add sg_set_iectrl() function   Masahiro Yamada
• [U-Boot] [PATCH 12/13] ARM: uniphier: add System Control register macros for ARMv8 SoCs   Masahiro Yamada
• [U-Boot] [PATCH 13/13] ARM: uniphier: support Debug UART   Masahiro Yamada
• [U-Boot] [PATCH 1/6] i2c: designware_i2c: Add ic_enable_status to ic_regs struct   Stefan Roese
• [U-Boot] [PATCH 2/6] i2c: designware_i2c: Add dw_i2c_enable() helper function   Stefan Roese
• [U-Boot] [PATCH 3/6] i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()   Stefan Roese
• [U-Boot] [PATCH 4/6] i2c: designware_i2c: Prepare for DM driver conversion   Stefan Roese
• [U-Boot] [PATCH 5/6] i2c: designware_i2c: Add DM support   Stefan Roese
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Stefan Roese
• [U-Boot] [PATCH 1/3] sunxi: Add support for USB vbus pin for USB3   Hans de Goede
• [U-Boot] [PATCH 2/3] sunxi: Specify USB vbus pins for orangepi boards   Hans de Goede
• [U-Boot] [PATCH 3/3] sunxi: Add a bunch of missing compatible strings to sunxi_gpio.c   Hans de Goede
• [U-Boot] [PATCH] arm: socfpga: Enable DM_I2C   Stefan Roese
• [U-Boot] Problems with D-cache invalidation in Freescale eSDHC driver   mario.six at gdsys.cc
• [U-Boot] [PATCH] fixup! ARM: uniphier: support Debug UART   Masahiro Yamada
• [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x   Peng Fan
• [U-Boot] [PATCH] driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4] driver: net: fsl-mc: Check NULL before pointer dereference   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: ldpaa_eth: return number of buffer seeded   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Free dflt_dpio pointer after its usage   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Check NULL before pointer dereference   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/6] i2c: designware_i2c: Add ic_enable_status to ic_regs struct   Marek Vasut
• [U-Boot] [PATCH 2/6] i2c: designware_i2c: Add dw_i2c_enable() helper function   Marek Vasut
• [U-Boot] [PATCH 3/6] i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()   Marek Vasut
• [U-Boot] [PATCH 0/2] board: ti: am57xx: Set ethernet MAC addresses from EEPROM to env   Roger Quadros
• [U-Boot] [PATCH 1/2] net: export eth_setenv_enetaddr_by_index() to net.h   Roger Quadros
• [U-Boot] [PATCH 2/2] board: ti: am57xx: Set ethernet MAC addresses from EEPROM to env   Roger Quadros
• [U-Boot] [PATCH] arm: socfpga: Enable DM_I2C   Marek Vasut
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [U-Boot v3] usb: xhci: Fix vendor command error if the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION.   Marek Vasut
• [U-Boot] [PATCH] [v3] armv8: fsl-layerscape: Updating entries in Serdes Table   Pratiyush Mohan Srivastava
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [UBOOT PATCH v1 0/2] Add ACPI table support on Minnowmax   Stefan Roese
• [U-Boot] [PATCH 2/6] i2c: designware_i2c: Add dw_i2c_enable() helper function   Stefan Roese
• [U-Boot] [PATCH 2/6] i2c: designware_i2c: Add dw_i2c_enable() helper function   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Enable DM_I2C   Stefan Roese
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Enable DM_I2C   Marek Vasut
• [U-Boot] [PATCH v4 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v3 1/2] flash: add device ID for Microchip PIC32 internal flash.   Purna Chandra Mandal
• [U-Boot] [PATCH v3 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.   Purna Chandra Mandal
• [U-Boot] [PATCH v2 1/2] mmc: Fix switch..case indention   Tom Rini
• [U-Boot] [PATCH v2 2/2] mmc: Print send_cmd response only when return value is zero   Tom Rini
• [U-Boot] [PATCH] net: rtl8169: Fix build error when DEBUG is on   Tom Rini
• [U-Boot] [PATCH 1/2] efi_stub: Move carriage return before line feed in putc()   Tom Rini
• [U-Boot] [PATCH 2/2] debug_uart: Remove duplicated carriage return handling   Tom Rini
• [U-Boot] [PATCH 1/2] net: export eth_setenv_enetaddr_by_index() to net.h   Tom Rini
• [U-Boot] [PATCH 2/2] board: ti: am57xx: Set ethernet MAC addresses from EEPROM to env   Tom Rini
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Stefan Roese
• [U-Boot] [PATCH v4 0/4] This series add MUSB support on PIC32MZDA Starter Kit.   Purna Chandra Mandal
• [U-Boot] [PATCH v4 1/4] arm: add missing writes[bwql], reads[bwql].   Purna Chandra Mandal
• [U-Boot] [PATCH v4 2/4] drivers: remove writes{b, w, l, q} and reads{b, w, l, q}.   Purna Chandra Mandal
• [U-Boot] [PATCH v4 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Purna Chandra Mandal
• [U-Boot] [PATCH v4 4/4] board: pic32mzda: enable USB-host, USB-storage support.   Purna Chandra Mandal
• [U-Boot] Problems with D-cache invalidation in Freescale eSDHC driver   Peng Fan
• [U-Boot] [PATCH v4 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Marek Vasut
• [U-Boot] [PATCH 2/6] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Stefan Roese
• [U-Boot] [PATCH] MAINTAINERS : Add entry for ls2080/5 SECURE BOOT defconfigs   Saksham Jain
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Cyrille Pitchen
• [U-Boot] [PATCH v4 00/14] Add Support for Secure Boot on LS208x   york sun
• [U-Boot] [PATCH v4 01/14] armv8: ls2080: Add SFP Configs for LS2080/LS2085   york sun
• [U-Boot] [PATCH v4 02/14] armv8: ls2080: Add Secure Boot configs: SEC, Security Monitor, SRK and RCW   york sun
• [U-Boot] [PATCH v4 03/14] SECURE BOOT: Add new ESBC header for ls-ch3 Secure Boot   york sun
• [U-Boot] [PATCH v4 04/14] SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb   york sun
• [U-Boot] [PATCH v4 05/14] armv8: fsl-lsch3: Add bootscript header address for Secure Boot   york sun
• [U-Boot] [PATCH v4 06/14] SECURE BOOT: Copy Bootscript and header from NOR to DDR for LS2080/5   york sun
• [U-Boot] [PATCH v4 08/14] armv8 : ls2080: Add config for endianess of CCSR GUR   york sun
• [U-Boot] [PATCH v4 09/14] armv8: fsl-lsch3: Disable SMMU during Secure Boot   york sun
• [U-Boot] [PATCH v4 10/14] crypto/fsl: Correct 64bit Write when MMU disabled   york sun
• [U-Boot] [PATCH v4 11/14] crypto/fsl: Make CAAM transactions cacheable   york sun
• [U-Boot] [PATCH v4 13/14] SECURE BOOT: Halt execution when secure boot fail after reset request   york sun
• [U-Boot] [PATCH v4 14/14] SECURE BOOT: Change fsl_secboot_validate function to output image addr   york sun
• [U-Boot] Could you please update your denx.de U-Boot repos?   Stephen Warren
• [U-Boot] [PATCH] driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0   york sun
• [U-Boot] [PATCH 1/2][v2] driver: net: ldpaa_eth: Add support of PHY framework   york sun
• [U-Boot] [PATCH 1/2] net: xilinx_axi: use interface type instead of zero   Michal Simek
• [U-Boot] [PATCH 2/2] net: xilinx_axi: Clear Isolate bit if found during phy setup   Michal Simek
• [U-Boot] [PATCH 2/2] armv8/ls1043aqds: use configuarable clock for non-QSPI boot   york sun
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   François-David Collin
• [U-Boot] [PATCH v4 2/4] drivers: remove writes{b, w, l, q} and reads{b, w, l, q}.   Scott Wood
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] U-Boot broken for LS2080   york sun
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH v2 0/5] Enable caches for the RPi2   Stephen Warren
• [U-Boot] [PATCH 2/2] armv8/ls1043aqds: use configuarable clock for non-QSPI boot   Qianyu Gong
• [U-Boot] [PATCH V2] serial: add BCM283x mini UART driver   Stephen Warren
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for Dserve DSRV9703C tablet   Hans de Goede
• [U-Boot] [PATCH v3 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled   Simon Glass
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   François-David Collin
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] Newbie SPL question for socfpga_sockit   Phil Reid
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   François-David Collin
• [U-Boot] ext4 and caching   Ioan Nicu
• [U-Boot] Fwd: Re: 100% open TZ and boot board   Enrique
• [U-Boot] [PATCH] sunxi: Add support for Cubietruck Plus   Dennis Gilmore
• [U-Boot] [PATCH] sunxi: Add support for Cubietruck Plus   Dennis Gilmore
• [U-Boot] [PATCH] arm: socfpga: Nuke useless include   Marek Vasut
• [U-Boot] [PATCH] sandbox: Enable many more commands   Simon Glass
• [U-Boot] [PATCH v2 1/3] buildman: Allow branch names which conflict with directories   Simon Glass
• [U-Boot] [PATCH v2 2/3] buildman: Add a way to specific a full toolchain prefix   Simon Glass
• [U-Boot] [PATCH v2 3/3] buildman: Clarify the use of -V   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: usb: Unbind old block devices when shutting down USB   Simon Glass
• [U-Boot] [PATCH v3 2/4] dm: sandbox: Switch over to use DM for block devices   Simon Glass
• [U-Boot] [PATCH v3 3/4] dm: sandbox: Drop the pre-DM host implementation   Simon Glass
• [U-Boot] [PATCH v3 4/4] dm: blk: Add tests for block devices   Simon Glass
• [U-Boot] [PATCH] sandbox: Enable many more commands   Tom Rini
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v2] serial: pl01x: Add support for devices with the rate pre-configured.   Stephen Warren
• [U-Boot] Which entry in drivers/net/phy/realtek.c matches my device?   Michael Haas
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   François-David Collin
• [U-Boot] How to run a new instance of u-boot from u-boot shell prompt   Woody Wu
• [U-Boot] [PATCH] mx27: 16-bit wide watchdog registers   Leonid Iziumtsev
• [U-Boot] [PATCH] spl: Print from which mmc slot spl is trying to boot   Hans de Goede
• [U-Boot] [PATCH] sunxi: Enable support for the eMMC found on the orangepi plus   Hans de Goede
• [U-Boot] [PATCH] cmd: spi: check return value of strdup   Peng Fan
• [U-Boot] [PATCH] spl: Print from which mmc slot spl is trying to boot   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Add support for Cubietruck Plus   Hans de Goede
• [U-Boot] [PATCH] test/dm/core.c: Make pre-reloc test use pre-reloc struct   Tom Rini
• [U-Boot] ext4 and caching   Eric Nelson
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] Linux hangs due to commit v2015.10-15-g02cc27c on loading i2c-mv64xx   Michael Haas
• [U-Boot] [PATCH 1/5] arm: include: Import unified.h from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 2/5] arm: lib: Drop underscore from private libgcc filenames   Marek Vasut
• [U-Boot] [PATCH 3/5] arm: lib: Sync libgcc shift operations   Marek Vasut
• [U-Boot] [PATCH 4/5] arm: lib: Sync libgcc 32b division/modulo operations   Marek Vasut
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH] arm: mx5: Enable NAND TrimFFS on M53EVK   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: sockit: Use more relaxed DRAM timings   Marek Vasut
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] Linux hangs due to commit v2015.10-15-g02cc27c on loading i2c-mv64xx   Hans de Goede
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [RFC PATCH 1/2] add block device cache   Tom Rini
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Tom Rini
• [U-Boot] [RFC PATCH 1/2] add block device cache   Eric Nelson
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PATCH] mx27: 16-bit wide watchdog registers   Fabio Estevam
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH 01/11] zipitz2: restore board support   Vasily Khoruzhick
• [U-Boot] [PATCH 02/11] zipitz2: enable LCD rotation   Vasily Khoruzhick
• [U-Boot] [PATCH 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Vasily Khoruzhick
• [U-Boot] [PATCH 04/11] zipitz2: enable libfdt   Vasily Khoruzhick
• [U-Boot] [PATCH 05/11] pxa-common: pxa27x has 3 OHCI ports   Vasily Khoruzhick
• [U-Boot] [PATCH 06/11] zipitz2: enable USB host support   Vasily Khoruzhick
• [U-Boot] [PATCH 07/11] pxa: start.S: enable SRAM clock   Vasily Khoruzhick
• [U-Boot] [PATCH 08/11] pxa: add support for D- and I- caches   Vasily Khoruzhick
• [U-Boot] [PATCH 09/11] pxa_lcd: make driver cache-aware   Vasily Khoruzhick
• [U-Boot] [PATCH 10/11] zipitz2: enable caches   Vasily Khoruzhick
• [U-Boot] [PATCH 11/11] cfi_flash: return device into read array mode after reading status   Vasily Khoruzhick
• [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices   Eric Nelson
• [U-Boot] [RFC V2 PATCH 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [RFC V2 PATCH 2/3] block: add Kconfig options for [CMD_]BLOCK_CACHE   Eric Nelson
• [U-Boot] [RFC V2 PATCH 3/3] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PATCH 01/11] zipitz2: restore board support   Marek Vasut
• [U-Boot] [PATCH 02/11] zipitz2: enable LCD rotation   Marek Vasut
• [U-Boot] [PATCH 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Marek Vasut
• [U-Boot] [PATCH 04/11] zipitz2: enable libfdt   Marek Vasut
• [U-Boot] [PATCH 05/11] pxa-common: pxa27x has 3 OHCI ports   Marek Vasut
• [U-Boot] [PATCH 06/11] zipitz2: enable USB host support   Marek Vasut
• [U-Boot] [PATCH 07/11] pxa: start.S: enable SRAM clock   Marek Vasut
• [U-Boot] [PATCH 08/11] pxa: add support for D- and I- caches   Marek Vasut
• [U-Boot] [PATCH 09/11] pxa_lcd: make driver cache-aware   Marek Vasut
• [U-Boot] [PATCH 10/11] zipitz2: enable caches   Marek Vasut
• [U-Boot] [PATCH 11/11] cfi_flash: return device into read array mode after reading status   Marek Vasut
• [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices   Marek Vasut
• [U-Boot] [PATCH 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Vasily Khoruzhick
• [U-Boot] [PATCH 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Marek Vasut
• [U-Boot] [PATCH] armv8/ls2080ardb: Update DDR timing to support more UDIMMs   Shengzhou Liu
• [U-Boot] [PATCH] sunxi: Enable support for the eMMC found on the orangepi plus   Chen-Yu Tsai
• [U-Boot] [PATCH] dm: i2c: mxc_i2c: implement i2c_idle_bus   Heiko Schocher
• [U-Boot] [PATCH v5 0/4] This series add MUSB support on PIC32MZDA Starter Kit.   Purna Chandra Mandal
• [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].   Purna Chandra Mandal
• [U-Boot] [PATCH v5 2/4] drivers: remove writes{b, w, l, q} and reads{b, w, l, q}.   Purna Chandra Mandal
• [U-Boot] [PATCH v5 3/4] drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller.   Purna Chandra Mandal
• [U-Boot] [PATCH v5 4/4] board: pic32mzda: enable USB-host, USB-storage support.   Purna Chandra Mandal
• [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig   Stefan Roese
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH 1/2] dm: spi: soft_spi: support linux way and bug fix   Peng Fan
• [U-Boot] [PATCH 2/2] dm: gpio: introduce 74x164 driver   Peng Fan
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s   Chen-Yu Tsai
• [U-Boot] [PATCH 0/3] Update gdsys board support   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH][v2] driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0   Prabhakar Kushwaha
• [U-Boot] [PATCH 14/18 v2] sf: add 4byte address opcodes   Cyrille Pitchen
• [U-Boot] [PATCH 1/6] i2c: designware_i2c: Add ic_enable_status to ic_regs struct   Bin Meng
• [U-Boot] [PATCH 2/6] i2c: designware_i2c: Add dw_i2c_enable() helper function   Bin Meng
• [U-Boot] [PATCH 3/6] i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()   Bin Meng
• [U-Boot] [PATCH 4/6] i2c: designware_i2c: Prepare for DM driver conversion   Bin Meng
• [U-Boot] [PATCH 5/6] i2c: designware_i2c: Add DM support   Bin Meng
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Bin Meng
• [U-Boot] [PATCH 14/18 v2] sf: add 4byte address opcodes   Cyrille Pitchen
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Stefan Roese
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Bin Meng
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Jagan Teki
• [U-Boot] [PATCH] dm: i2c: mxc_i2c: implement i2c_idle_bus   Peng Fan
• [U-Boot] [UBOOT PATCH v1 0/2] Add ACPI table support on Minnowmax   Bin Meng
• [U-Boot] [PATCH v6 00/76] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] Problems with D-cache invalidation in Freescale eSDHC driver   mario.six at gdsys.cc
• [U-Boot] Latest U-boot branch not booting on Hummingbird A31   wens Tsai
• [U-Boot] Problems with D-cache invalidation in Freescale eSDHC driver   Peng Fan
• [U-Boot] Latest U-boot branch not booting on Hummingbird A31   Hans de Goede
• [U-Boot] Latest U-boot branch not booting on Hummingbird A31   Chen-Yu Tsai
• [U-Boot] [linux-sunxi] Re: Latest U-boot branch not booting on Hummingbird A31   Hans de Goede
• [U-Boot] [linux-sunxi] Re: Latest U-boot branch not booting on Hummingbird A31   Chen-Yu Tsai
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].   Purna Chandra Mandal
• [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].   Purna Chandra Mandal
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Stefan Roese
• [U-Boot] Which entry in drivers/net/phy/realtek.c matches my device?   Chen-Yu Tsai
• [U-Boot] Ethernet not found on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] arm: socfpga: Handle phy-mode OF property for GMACs   Marek Vasut
• [U-Boot] Ethernet not found on Arria 5.   Marek Vasut
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Bin Meng
• [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].   Marek Vasut
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Stefan Roese
• [U-Boot] [PATCH 00/18] sf: fix support of QSPI memories and controllers   Cyrille Pitchen
• [U-Boot] [PATCH v2 1/3] defconfig: Reorder boards' defconfig files   Bin Meng
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Bin Meng
• [U-Boot] [PATCH v2 3/3] net: Move CONFIG_RTL8169 to Kconfig   Bin Meng
• [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices   Eric Nelson
• [U-Boot] [PATCH] sunxi: Fix 2nd usb controller on sun4i/sun7i no longer working   Hans de Goede
• [U-Boot] [PATCH] mx6sabre_common: Fix U-Boot corruption after 'saveenv'   Fabio Estevam
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Stefan Roese
• [U-Boot] Newbie SPL question for socfpga_sockit   Chin Liang See
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PATCH] sunxi:Correct the LDO settings for sinovoip-bpi-m3 board   Vishnu Patekar
• [U-Boot] [PATCH] sunxi: sinovoip-bpi-m3: drop LDO settings from defconfig   Vishnu Patekar
• [U-Boot] Newbie SPL question for socfpga_sockit   Chin Liang See
• [U-Boot] Problems with D-cache invalidation in Freescale eSDHC driver   york sun
• [U-Boot] [RFC] ARMv7: Build cache_v7.c with -O1 to avoid gcc6 breakage   Hans de Goede
• [U-Boot] [PATCH] ARMv7: Build cache_v7.c with -O1 to avoid gcc6 breakage   Hans de Goede
• [U-Boot] [PATCH v2 3/3] net: Move CONFIG_RTL8169 to Kconfig   Stephen Warren
• [U-Boot] [PATCH 11/11] cfi_flash: return device into read array mode after reading status   Stefan Roese
• [U-Boot] [PATCH][v2] driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Joe Hershberger
• [U-Boot] [PATCH v2 1/3] defconfig: Reorder boards' defconfig files   Joe Hershberger
• [U-Boot] [PATCH v2 3/3] net: Move CONFIG_RTL8169 to Kconfig   Joe Hershberger
• [U-Boot] UBI Fastmap seems to be broken   Benzig, Tony
• [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices   Marek Vasut
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Scott Wood
• [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices   Eric Nelson
• [U-Boot] [RFC V2 PATCH 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Eric Nelson
• [U-Boot] U-Boot broken for LS2080   york sun
• [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices   Marek Vasut
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH] arm64: Keep macro PGTABLE_SIZE for non-full-va map   York Sun
• [U-Boot] [PATCH] arm64: Keep macro PGTABLE_SIZE for non-full-va map   Alexander Graf
• [U-Boot] [PATCH 11/11] cfi_flash: return device into read array mode after reading status   Vasily Khoruzhick
• [U-Boot] [PATCH] arm64: Keep macro PGTABLE_SIZE for non-full-va map   york sun
• [U-Boot] [PATCH] arm64: Fix layerscape mmu setup   Alexander Graf
• [U-Boot] [PATCH] net: phy: Realtek RTL8211B/C PHY ID fix   Karsten Merker
• [U-Boot] [PATCH] arm64: Keep macro PGTABLE_SIZE for non-full-va map   Alexander Graf
• [U-Boot] [PATCH] arm64: Fix layerscape mmu setup   york sun
• [U-Boot] [PATCH] arm64: Keep macro PGTABLE_SIZE for non-full-va map   york sun
• [U-Boot] [PATCH] arm64: Keep macro PGTABLE_SIZE for non-full-va map   Alexander Graf
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] [PATCH] sunxi: Enable support for the eMMC found on the orangepi plus   Hans de Goede
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location   Vikas MANOCHA
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] Build failures with hard float   Sergey Kubushyn
• [U-Boot] [PATCH v2] serial: pl01x: Add support for devices with the rate pre-configured.   Stephen Warren
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Bin Meng
• [U-Boot] [PATCH] sunxi:Correct the LDO settings for sinovoip-bpi-m3 board   Vishnu Patekar
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH 11/11] cfi_flash: return device into read array mode after reading status   Stefan Roese
• [U-Boot] [PATCH v5 0/4] Make usb device-tree fixup independent of USB controller   Sriram Dash
• [U-Boot] [PATCH v5 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file   Sriram Dash
• [U-Boot] [PATCH v5 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v5 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] [PATCH v5 4/4] drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [RFC PATCH 0/1] net: phy: Force master mode for RTL8211C   Michael Haas
• [U-Boot] [RFC PATCH] net: phy: Force master mode for RTL8211C   Michael Haas
• [U-Boot] [PATCH v5 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Marek Vasut
• [U-Boot] [PATCH v5 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file   Marek Vasut
• [U-Boot] [PATCH v5 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH v5 4/4] drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH v7 01/87] mtd: Add m25p80 driver   Jagan Teki
• [U-Boot] [PATCH v7 02/87] mtd: Add Kconfig entry for MTD_M25P80   Jagan Teki
• [U-Boot] [PATCH v7 03/87] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH v7 04/87] doc: device-tree-bindings: jedec, spi-nor   Jagan Teki
• [U-Boot] [PATCH v7 05/87] mtd: spi-nor: Add Kconfig entry for MTD_SPI_NOR   Jagan Teki
• [U-Boot] [PATCH v7 06/87] mtd: spi-nor: Add kconfig for MTD_SPI_NOR_USE_4K_SECTORS   Jagan Teki
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH v7 07/87] mtd: spi-nor: Add MTD support   Jagan Teki
• [U-Boot] [PATCH v7 08/87] mtd: spi-nor: Add spi_nor support in m25p80   Jagan Teki
• [U-Boot] [PATCH v7 09/87] mtd: spi-nor: Add dm spi-nor probing   Jagan Teki
• [U-Boot] [PATCH v7 10/87] mtd: spi-nor: Add spi_flash_probe for mtd-dm-spi-nor   Jagan Teki
• [U-Boot] [PATCH v7 11/87] mtd: spi-nor: Add spi_flash_free for mtd-dm-spi-nor   Jagan Teki
• [U-Boot] [PATCH v7 12/87] mtd: spi-nor: m25p80: Add spi_nor support for non-dm   Jagan Teki
• [U-Boot] [PATCH v7 13/87] sf: Rename erase_size to erasesize   Jagan Teki
• [U-Boot] [PATCH v7 14/87] sf: Use erasesize instead of sector_size   Jagan Teki
• [U-Boot] [PATCH v7 15/87] sf: Use uint64_t for flash->size   Jagan Teki
• [U-Boot] [PATCH v7 16/87] spi_flash: Use mtd_info operation for SPI-NOR   Jagan Teki
• [U-Boot] [PATCH v7 17/87] spi_flash: Use spi_flash_t instead of struct spi_flash   Jagan Teki
• [U-Boot] [PATCH v7 18/87] mtd: spi-nor: Move spi_read_then_write to spi layer   Jagan Teki
• [U-Boot] [PATCH v7 19/87] spi: Rename spi_read_then_write to spi_write_then_read   Jagan Teki
• [U-Boot] [PATCH v7 20/87] mtd: spi-nor: Rename SPI_FLASH_BAR to SPI_NOR_BAR   Jagan Teki
• [U-Boot] [PATCH v7 21/87] mtd: spi-nor: Add Kconfig entry for SPI_NOR_BAR   Jagan Teki
• [U-Boot] [PATCH v7 22/87] mtd: spi-nor: Copy spl files from drivers/mtd/spi   Jagan Teki
• [U-Boot] [PATCH v7 23/87] mtd: spi-nor: spl: Follow ascending order of include headers   Jagan Teki
• [U-Boot] [PATCH v7 24/87] mtd: spi-nor: fsl_espi_spl: Use mtd_info   Jagan Teki
• [U-Boot] [PATCH v7 25/87] mtd: spi-nor: fsl_espi_spl: Use writebufsize instead of page_size   Jagan Teki
• [U-Boot] [PATCH v7 26/87] mtd: spi-nor: spi_spl_load: Use mtd_info   Jagan Teki
• [U-Boot] [PATCH v7 27/87] spl: Add CONFIG_SPL_SPI_NOR_SUPPORT   Jagan Teki
• [U-Boot] [PATCH v7 28/87] mtd: spi-nor: Add flash vendor Kconfig entries   Jagan Teki
• [U-Boot] [PATCH v7 29/87] arm: zynq: Kconfig: Select MTD uclass   Jagan Teki
• [U-Boot] [PATCH v7 30/87] arm: zynq: Kconfig: Drop DM_SPI_FLASH   Jagan Teki
• [U-Boot] [PATCH v7 31/87] mtd: spi-nor: Copy sf_dataflash   Jagan Teki
• [U-Boot] [PATCH v7 32/87] mtd: dataflash: Remove unneeded spi data   Jagan Teki
• [U-Boot] [PATCH v7 33/87] mtd: dataflash: Move flash id detection into jedec_probe   Jagan Teki
• [U-Boot] [PATCH v7 34/87] mtd: dataflash: Fix add_dataflash return logic   Jagan Teki
• [U-Boot] [PATCH v7 35/87] mtd: dataflash: Add UCLASS_MTD support   Jagan Teki
• [U-Boot] [PATCH v7 36/87] mtd: dataflash: Use spi_write_then_read   Jagan Teki
• [U-Boot] [PATCH v7 37/87] mtd: dataflash: Drop sf_internal.h   Jagan Teki
• [U-Boot] [PATCH v7 38/87] mtd: dataflash: Minor cleanups   Jagan Teki
• [U-Boot] [PATCH v7 39/87] mtd: Rename sf_dataflash.c to mtd_dataflash.c   Jagan Teki
• [U-Boot] [PATCH v7 40/87] mtd: spi-nor: Add Kconfig entry for mtd_dataflash   Jagan Teki
• [U-Boot] [PATCH v7 41/87] mtd: dataflash: Add MTD_DATAFLASH_WRITE_VERIFY   Jagan Teki
• [U-Boot] [PATCH v7 42/87] mtd: spi-nor: Add kconfig MTD_DATAFLASH_WRITE_VERIFY   Jagan Teki
• [U-Boot] [PATCH v7 43/87] configs: ls1021aqds: Drop DM_SPI_FLASH and DATAFLASH   Jagan Teki
• [U-Boot] [PATCH v7 44/87] defconfig: ls1021aqds_qspi: Enable SPI-NOR   Jagan Teki
• [U-Boot] [PATCH v7 45/87] defconfig: ls1021aqds_qspi: Enable CONFIG_MTD_DATAFLASH   Jagan Teki
• [U-Boot] [PATCH v7 46/87] mtd: spi-nor: Copy sandbox   Jagan Teki
• [U-Boot] [PATCH v7 47/87] mtd: spi-nor: sandbox: Use spi-nor header   Jagan Teki
• [U-Boot] [PATCH v7 48/87] mtd: spi-nor: sandbox: Fix ID exctract from spi_nor_info   Jagan Teki
• [U-Boot] [PATCH v7 49/87] mtd: spi-nor: Add SPI_NOR_SANDBOX   Jagan Teki
• [U-Boot] [PATCH v7 50/87] test/dm: Makefile: Use CONFIG_DM_MTD_SPI_NOR   Jagan Teki
• [U-Boot] [PATCH v7 51/87] test/dm: spi: Use CONFIG_DM_MTD_SPI_NOR   Jagan Teki
• [U-Boot] [PATCH v7 52/87] configs: sandbox: Enable SPI-NOR sandbox driver   Jagan Teki
• [U-Boot] [PATCH v7 53/87] test/dm: spi: Use m25p80 as driver name   Jagan Teki
• [U-Boot] [PATCH v7 54/87] dts: sandbox: Use jedec, spi-nor compatible string   Jagan Teki
• [U-Boot] [PATCH v7 55/87] x86: Drop using spi_flash_dm_ops   Jagan Teki
• [U-Boot] [PATCH v7 56/87] spi_flash: Use spi_flash_t   Jagan Teki
• [U-Boot] [PATCH v7 57/87] defconfig: zynq_zc770_xm013: Enable ZYNQ_QSPI   Jagan Teki
• [U-Boot] [PATCH v7 58/87] configs: Drop CONFIG_SPI_FLASH_MTD   Jagan Teki
• [U-Boot] [PATCH v7 59/87] config: Enable SPI-NOR framework   Jagan Teki
• [U-Boot] [PATCH v7 60/87] spi-nor: Use CONFIG_MTD_SPI_NOR   Jagan Teki
• [U-Boot] [PATCH v7 61/87] configs: Use CONFIG_SPI_NOR_BAR   Jagan Teki
• [U-Boot] [PATCH v7 62/87] configs: spi-nor: Add new flash vendor configs   Jagan Teki
• [U-Boot] [PATCH v7 63/87] mtd: spi-nor: Add CONFIG_SPI_NOR_MISC   Jagan Teki
• [U-Boot] [PATCH v7 64/87] configs: Use CONFIG_SPI_NOR_MISC   Jagan Teki
• [U-Boot] [PATCH v7 65/87] powerpc/mpc85xx: Use spi.h instead of spi_flash.h   Jagan Teki
• [U-Boot] [PATCH v7 66/87] sf: Drop entire spi-flash framework   Jagan Teki
• [U-Boot] [PATCH v7 67/87] uclass: Drop UCLASS_SPI_FLASH   Jagan Teki
• [U-Boot] [PATCH v7 68/87] spi: Drop mode_rx   Jagan Teki
• [U-Boot] [PATCH v7 69/87] spi: Drop SPI_RX_FAST   Jagan Teki
• [U-Boot] [PATCH v7 70/87] MAINTAINERS: Add myself as SPI NOR maintainer   Jagan Teki
• [U-Boot] [PATCH v7 71/87] configs: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS   Jagan Teki
• [U-Boot] [PATCH v7 72/87] dts: spi-nor: Use jedec, spi-nor compatible string   Jagan Teki
• [U-Boot] [PATCH v7 73/87] dts: spi-nor: Use spi-nor as node name   Jagan Teki
• [U-Boot] [PATCH v7 74/87] mtd: spi-nor: Add erase ops   Jagan Teki
• [U-Boot] [PATCH v7 75/87] mtd: spi-nor: Not required to memset dummy byte   Jagan Teki
• [U-Boot] [PATCH v7 76/87] mtd: spi-nor: Move opcode handling in m25p80   Jagan Teki
• [U-Boot] [PATCH v7 77/87] mtd: spi-nor: Rename spi_nor_addr to m25p_addr2cmd   Jagan Teki
• [U-Boot] [PATCH v7 78/87] mtd: spi-nor: Add addr_width   Jagan Teki
• [U-Boot] [PATCH v7 79/87] mtd: spi-nor: Add m25p_cmdsz   Jagan Teki
• [U-Boot] [PATCH v7 80/87] mtd: spi-nor: read_dummy refers to dummy cycles not bytes   Jagan Teki
• [U-Boot] [PATCH v7 81/87] mtd: spi-nor: Use to instead of offset in write   Jagan Teki
• [U-Boot] [PATCH v7 82/87] mtd: spi-nor: offset with addr   Jagan Teki
• [U-Boot] [PATCH v7 83/87] mtd: m25p80: Rename cmd with opcode   Jagan Teki
• [U-Boot] [PATCH v7 84/87] armv8/ls1043a: move CONFIG_MTD to defconfig   Jagan Teki
• [U-Boot] [PATCH v7 85/87] defconfig: ls1021atwr_sdcard_qspi: Enable CONFIG_MTD   Jagan Teki
• [U-Boot] [PATCH v7 86/87] defconfig: ls1021aqds_sdcard_qspi: Enable MTD   Jagan Teki
• [U-Boot] [PATCH v7 87/87] defconfig: ls1021aqds_sdcard_qspi: Enable MTD_DATAFLASH   Jagan Teki
• [U-Boot] [RFC PATCH] net: phy: Force master mode for RTL8211C   Michael Haas
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [RFC PATCH 0/1] net: phy: Force master mode for RTL8211C   Michael Haas
• [U-Boot] [RFC PATCH] net: phy: Force master mode for RTL8211C   Michael Haas
• [U-Boot] [RFC PATCH] net: phy: Force master mode for RTL8211C   Hans de Goede
• [U-Boot] Problems with D-cache invalidation in Freescale eSDHC driver   Mario Six
• [U-Boot] [PATCH] sunxi:Correct the LDO settings for sinovoip-bpi-m3 board   Hans de Goede
• [U-Boot] [PATCH] sunxi:Correct the LDO settings for sinovoip-bpi-m3 board   Hans de Goede
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Peter Korsgaard
• [U-Boot] powerpc/mpc85xx: Alignment issue when adding code to start.S   Mario Six
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Hans de Goede
• [U-Boot] U-boot on Raspberry pi B+ does not display on HDMI monitor   zbvs
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Michael Haas
• [U-Boot] [PATCH] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2   Peter Korsgaard
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] UBI Fastmap seems to be broken   Benzig, Tony
• [U-Boot] Problem with attaching UBI partition   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] ARMv7: Build cache_v7.c with -O1 to avoid gcc6 breakage   Tom Rini
• [U-Boot] [PATCH] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Marek Vasut
• [U-Boot] Problem with attaching UBI partition   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Marek Vasut
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] [PATCH v3 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] [PATCH] armv8: lsch3: Enable WUO config for RNI-20 node   york sun
• [U-Boot] [PATCH][v2] armv8: ls2080ardb: invert irq pins polarity for AQR405 PHY   york sun
• [U-Boot] [PATCH] drivers/crypto/fsl: correct error checking in run_descriptor   york sun
• [U-Boot] [PATCH 1/2] drivers/crypto/fsl: add constructs for protocol descriptors   york sun
• [U-Boot] [PATCH 2/2] drivers/crypto/fsl: define structures for PDB   york sun
• [U-Boot] [PATCH] ls102xa: fdt: Update FSL_QSPI_COMPAT and FSL_DSPI_COMPAT   york sun
• [U-Boot] [PATCH 1/2] boards: ls2080: Fix default bootargs   york sun
• [U-Boot] [PATCH 1/5 v6] armv8: ls2080a: remove obsolete stream ID partitioning support   york sun
• [U-Boot] [PATCH 2/5 v6] armv8: ls2080a: update stream ID partitioning info   york sun
• [U-Boot] [PATCH 3/5 v6] pci: make pci_get_hose_head() available to external users   york sun
• [U-Boot] [PATCH 4/5 v6] pci/layerscape: add defines for LUT   york sun
• [U-Boot] [PATCH 5/5 v6] pci/layerscape: set LUT and msi-map for discovered PCI devices   york sun
• [U-Boot] [PATCH 1/2 v2] driver/ddr/fsl: Add address parity support for DDR4 UDIMM/discrete   york sun
• [U-Boot] [PATCH 2/2 v2] driver/ddr/fsl: Add workaround for erratum A-009803   york sun
• [U-Boot] [PATCH] [v3] armv8: fsl-layerscape: Updating entries in Serdes Table   york sun
• [U-Boot] [PATCH 1/2][v2] driver: net: ldpaa_eth: Add support of PHY framework   york sun
• [U-Boot] [PATCH 2/2][v2] armv8: ls2085a: Remove phy configuration from QDS and RDB   york sun
• [U-Boot] [PATCH] armv8/fsl-lsch2: fix sdhc clock frequency value   york sun
• [U-Boot] [PATCH] arm: ls102xa: Enable CONFIG_SYS_CONSOLE_IS_IN_ENV support   york sun
• [U-Boot] [PATCH] ARM: tegra210: set PLLE_PTS bit when enabling PLLE   Stephen Warren
• [U-Boot] [PATCH v2 1/3] freescale: vid: Return i2c mux to default channel   york sun
• [U-Boot] [PATCH v2 2/3] armv8/ls1043aqds: Return i2c mux to default chennel   york sun
• [U-Boot] [PATCH v2 3/3] armv8/ls1043aqds: Enable ID_EEPROM support for ls1043aqds   york sun
• [U-Boot] [PATCH][v2] driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0   york sun
• [U-Boot] [PATCH] arm64: Fix layerscape mmu setup   york sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   york sun
• [U-Boot] [PATCH 0/3] ARM: uniphier: more patches for bulk updates for v2016.05-rc1   Masahiro Yamada
• [U-Boot] [PATCH 1/3] ARM: uniphier: fix README instruction for updating U-Boot via TFTP   Masahiro Yamada
• [U-Boot] [PATCH 2/3] ARM: uniphier: add NOR boot support   Masahiro Yamada
• [U-Boot] [PATCH 3/3] ARM: uniphier: switch to raw U-Boot image   Masahiro Yamada
• [U-Boot] Newbie SPL question for socfpga_sockit   Dinh Nguyen
• [U-Boot] [PATCH] eth: dtsec: fix TBI ANA setting bug in dtsec_configure_serdes()   york sun
• [U-Boot] [PATCH] armv8: ls2080a: update fdt path for fsl-mc node   york sun
• [U-Boot] [linux-sunxi] Re: Latest U-boot branch not booting on Hummingbird A31   Hans de Goede
• [U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support   york sun
• [U-Boot] [PATCH 2/6] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Joe Hershberger
• [U-Boot] [PATCH v2] sunxi: Fix gmac not working due to cpu_eth_init no longer being called   Hans de Goede
• [U-Boot] [PATCH V2] fsl: esdhc: support driver model   york sun
• [U-Boot] [PATCH] armv8/ls2080ardb: Update DDR timing to support more UDIMMs   york sun
• [U-Boot] [PATCH] usb: gadget: Move CONFIG_USB_GADGET to Kconfig   Semen Protsenko
• [U-Boot] [PATCH 1/2] sunxi: Turn satapwr on from board_init   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Specify SATAPWR pin for Orangepi Plus   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig for yones toptech bs1078-v2 tablet   Peter Korsgaard
• [U-Boot] [PATCH] usb: gadget: Move CONFIG_USB_GADGET to Kconfig   Stephen Warren
• [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s   Hans de Goede
• [U-Boot] [PATCH 1/3] sunxi: Add support for USB vbus pin for USB3   Ian Campbell
• [U-Boot] [PATCH] sunxi:Correct the LDO settings for sinovoip-bpi-m3 board   Hans de Goede
• [U-Boot] [PATCH] sunxi: Fix 2nd usb controller on sun4i/sun7i no longer working   Ian Campbell
• [U-Boot] [PATCH] sunxi: Enable support for the eMMC found on the orangepi plus   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: Turn satapwr on from board_init   Ian Campbell
• [U-Boot] [linux-sunxi] [PATCH] sunxi: Add defconfig for yones toptech bs1078-v2 tablet   Hans de Goede
• [U-Boot] [PATCH] sunxi: Select OF_BOARD_SETUP from arch/arm/Kconfig   Hans de Goede
• [U-Boot] [PATCH] sunxi: Select OF_BOARD_SETUP from arch/arm/Kconfig   Ian Campbell
• [U-Boot] [PATCH] sunxi: Select OF_BOARD_SETUP from arch/arm/Kconfig   Hans de Goede
• [U-Boot] [PATCH v2] sunxi: Select CONFIG_OF_BOARD_SETUP from CONFIG_VIDEO   Hans de Goede
• [U-Boot] [PATCH] fastboot: allow retrieving fastboot variables from env   Steve Rae
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Joe Hershberger
• [U-Boot] [PATCH] fastboot: allow retrieving fastboot variables from env   Steve Rae
• [U-Boot] [PATCH] net: phy: Realtek RTL8211B/C PHY ID fix   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: xilinx_axi: Clear Isolate bit if found during phy setup   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: xilinx_axi: use interface type instead of zero   Joe Hershberger
• [U-Boot] Fwd: difference between ft_board_setup() and ft_system_setup()   Hannes Schmelzer
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Tom Rini
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Steve Rae
• [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig   Bin Meng
• [U-Boot] [PATCH V2] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH V2] fsl: esdhc: support driver model   york sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] ti: k2g: increase phy autoneg timeout   Tom Rini
• [U-Boot] [U-Boot,v2,1/9] cbfs: Update a function to be static   Tom Rini
• [U-Boot] [U-Boot, v2, 2/9] Add an option to enable the command line   Tom Rini
• [U-Boot] [U-Boot, v2, 3/9] arm: x86: Drop command-line code when CONFIG_CMDLINE is disabled   Tom Rini
• [U-Boot] [U-Boot, v2, 4/9] sandbox: Avoid calling commands when not available   Tom Rini
• [U-Boot] [U-Boot, v2, 6/9] Panic when no command line processing can be performed   Tom Rini
• [U-Boot] [U-Boot, v2, 7/9] Allow command code to compile to nothing   Tom Rini
• [U-Boot] [U-Boot, v2, 8/9] Allow command-line files to be dropped   Tom Rini
• [U-Boot] [U-Boot, v2, 9/9] Drop various features when the command line is not available   Tom Rini
• [U-Boot] [U-Boot, v2] serial: pl01x: Add support for devices with the rate pre-configured.   Tom Rini
• [U-Boot] cmd: Fix license command   Tom Rini
• [U-Boot] [U-Boot,1/2] Fix spelling of "comment".   Tom Rini
• [U-Boot] [U-Boot,2/2] Fix spelling of "supported/unsupported".   Tom Rini
• [U-Boot] Fix spelling of "transferred".   Tom Rini
• [U-Boot] [U-Boot, 01/14] mkimage: Fix munmap() call when importing data   Tom Rini
• [U-Boot] [U-Boot, 02/14] mkimage: Correct file being closed twice in fit_import_data()   Tom Rini
• [U-Boot] [U-Boot, 03/14] mkimage: Correct file being closed twice in fit_extract_data()   Tom Rini
• [U-Boot] [U-Boot, 04/14] part_iso: Drop the customer unaligned access functions   Tom Rini
• [U-Boot] [U-Boot, 05/14] part_efi: Drop the NULL check on dev_desc in part_print_efi()   Tom Rini
• [U-Boot] [U-Boot, 06/14] part_efi: Drop NULL check in part_get_info_efi()   Tom Rini
• [U-Boot] [U-Boot, 07/14] mkimage: Close the file when unable to get its size   Tom Rini
• [U-Boot] [U-Boot, 08/14] mkimage: Add a missing free() to fit_import_data()   Tom Rini
• [U-Boot] [U-Boot, 09/14] mkimage: Fix error path in fit_extract_data()   Tom Rini
• [U-Boot] [U-Boot, 10/14] mkimage: Fix missing free() in fit_extract_data()   Tom Rini
• [U-Boot] [U-Boot, 11/14] mkimage: Fix missing free() and close() in fit_build()   Tom Rini
• [U-Boot] [U-Boot, 12/14] mkimage: Ensure file is closed in fdt_property_file()   Tom Rini
• [U-Boot] [U-Boot, 13/14] mkimage: Don't close the file if it wasn't opened   Tom Rini
• [U-Boot] [U-Boot, 14/14] usb: Correct return value in usb_stor_info()   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] defconfig: Reorder boards' defconfig files   Tom Rini
• [U-Boot] [U-Boot,v2,2/3] net: Move CONFIG_RTL8139 to Kconfig   Tom Rini
• [U-Boot] [U-Boot,v2,3/3] net: Move CONFIG_RTL8169 to Kconfig   Tom Rini
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Marek Vasut
• [U-Boot] [PATCH] fastboot: allow retrieving fastboot variables from env   Marek Vasut
• [U-Boot] [PATCHv2 2/3] ARMv8/layerscape: Add FSL PPA support   Zhiqiang Hou
• [U-Boot] [PATCH] smsc95xx: fix operation on 64-bit systems   Stephen Warren
• [U-Boot] [PATCH] smsc95xx: fix operation on 64-bit systems   Marek Vasut
• [U-Boot] [PATCH 1/6 v2] i2c: designware_i2c: Add ic_enable_status to ic_regs struct   Stefan Roese
• [U-Boot] [PATCH 2/6 v2] i2c: designware_i2c: Add dw_i2c_enable() helper function   Stefan Roese
• [U-Boot] [PATCH 3/6 v2] i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()   Stefan Roese
• [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion   Stefan Roese
• [U-Boot] [PATCH 5/6 v2] i2c: designware_i2c: Add DM support   Stefan Roese
• [U-Boot] [PATCH 6/6 v2] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Stefan Roese
• [U-Boot] UBI Fastmap seems to be broken   Heiko Schocher
• [U-Boot] [PATCH 2/6 v2] i2c: designware_i2c: Add dw_i2c_enable() helper function   Marek Vasut
• [U-Boot] [PATCH 2/6] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Stefan Roese
• [U-Boot] [PATCH 2/6 v2] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Stefan Roese
• [U-Boot] [PATCH 2/6 v3] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Stefan Roese
• [U-Boot] [T1040] Boot location and NOR flash memory mapping   Valentin Longchamp
• [U-Boot] [PATCH 2/6 v3] i2c: designware_i2c: Add dw_i2c_enable() helper function   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Marek Vasut
• [U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support   Yao Yuan
• [U-Boot] [PATCH] armv8: ls2080a: update fdt path for fsl-mc node   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] sunxi: Fix gmac not working due to cpu_eth_init no longer being called   Michael Haas
• [U-Boot] POST WORD for socfpga platform   Abhishek Madhyastha
• [U-Boot] [PATCH v5 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Sriram Dash
• [U-Boot] [PATCH v5 4/4] drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type   Sriram Dash
• [U-Boot] [PATCH v5 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Marek Vasut
• [U-Boot] [PATCH v5 4/4] drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type   Marek Vasut
• [U-Boot] [PATCH v5 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller   Marek Vasut
• [U-Boot] [PATCH v2] sunxi: Select CONFIG_OF_BOARD_SETUP from CONFIG_VIDEO   Ian Campbell
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Lukasz Majewski
• [U-Boot] [PATCH v2] sunxi: Select CONFIG_OF_BOARD_SETUP from CONFIG_VIDEO   Hans de Goede
• [U-Boot] [PATCH v3] sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for Orange Pi 2 SBC   Hans de Goede
• [U-Boot] [PATCHv3 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard   Julian Scheel
• [U-Boot] [PATCH v5 00/14] Add Support for Secure Boot on LS2080   Saksham Jain
• [U-Boot] [PATCH v5 01/14] armv8: ls2080: Add SFP Configs for LS2080   Saksham Jain
• [U-Boot] [PATCH v5 02/14] ls2080: Add configs for SEC, SecMon, SRK and DCFG   Saksham Jain
• [U-Boot] [PATCH v5 03/14] fsl: ls-ch3: Add new header for Secure Boot   Saksham Jain
• [U-Boot] [PATCH v5 04/14] ls2080: Add Secure Boot support   Saksham Jain
• [U-Boot] [PATCH v5 05/14] Add bootscript header addr for ls2080a secure boot   Saksham Jain
• [U-Boot] [PATCH v5 06/14] fsl: ls-ch3: Copy Bootscript and header from NOR to DDR   Saksham Jain
• [U-Boot] [PATCH v5 07/14] ls2080: Change env variable "fdt_high"   Saksham Jain
• [U-Boot] [PATCH v5 08/14] ls2080: Add config for endianess of CCSR GUR   Saksham Jain
• [U-Boot] [PATCH v5 09/14] armv8: fsl-lsch3: Disable SMMU during Secure Boot   Saksham Jain
• [U-Boot] [PATCH v5 10/14] crypto/fsl: Correct 64-bit Write when MMU disabled   Saksham Jain
• [U-Boot] [PATCH v5 11/14] crypto/fsl: Make CAAM transactions cacheable   Saksham Jain
• [U-Boot] [PATCH v5 12/14] SECURE_BOOT: Use default bootargs   Saksham Jain
• [U-Boot] [PATCH v5 13/14] SECURE BOOT: Halt execution when secure boot fail   Saksham Jain
• [U-Boot] [PATCH v5 14/14] SECURE BOOT: Change fsl_secboot_validate func to ret image addr   Saksham Jain
• [U-Boot] [PATCH 1/2] armv8: fsl-layerscape: change LS1043A SVR register   Gong Qianyu
• [U-Boot] [PATCH 2/2] armv8: fsl-layerscape: add LS1023A SVR   Gong Qianyu
• [U-Boot] [PATCH] armv8/ls1043aqds: dts: set SPI mode for DSPI   Gong Qianyu
• [U-Boot] [PATCH][v4] armv8/ls2080ardb: Enable VID support   Rai Harninder
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [PATCH v3] sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig   Ian Campbell
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for Orange Pi 2 SBC   Ian Campbell
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Tom Rini
• [U-Boot] [PATCH] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU   Stefan Roese
• [U-Boot] Newbie SPL question for socfpga_sockit   Chin Liang See
• [U-Boot] [PATCH 0/2] ARM: keystone2: Fix missing privilege ID   Nishanth Menon
• [U-Boot] [PATCH 1/2] ARM: keystone2: Refactor MSMC macros to avoid #ifdeffery   Nishanth Menon
• [U-Boot] [PATCH 2/2] ARM: keystone2: Add missing privilege ID settings   Nishanth Menon
• [U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support   york sun
• [U-Boot] SoCFPGA cache / S-bit problem - was Re: Newbie SPL question for socfpga_sockit   Stefan Roese
• [U-Boot] [PATCH] README: Specify the full path for README.displaying-bmps   Fabio Estevam
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Sam Protsenko
• [U-Boot] [T1040] Boot location and NOR flash memory mapping   york sun
• [U-Boot] [PATCH] smsc95xx: fix operation on 64-bit systems   Joe Hershberger
• [U-Boot] [PATCH] mtd: denali: fix warning when compiled for 64bit system   Masahiro Yamada
• [U-Boot] [PATCH v2] spl_mmc: allow to load raw image   Masahiro Yamada
• [U-Boot] [PATCH 00/13] ARM: uniphier: bulk changes for v2016.05-rc1   Masahiro Yamada
• [U-Boot] [PATCH 0/3] ARM: uniphier: more patches for bulk updates for v2016.05-rc1   Masahiro Yamada
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [RFC V2 PATCH 1/3] drivers: block: add block device cache   Stephen Warren
• [U-Boot] [RFC V2 PATCH 2/3] block: add Kconfig options for [CMD_]BLOCK_CACHE   Stephen Warren
• [U-Boot] [RFC V2 PATCH 3/3] mmc: add support for block device cache   Stephen Warren
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Steve Rae
• [U-Boot] [RFC V2 PATCH 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [RFC V2 PATCH 2/3] block: add Kconfig options for [CMD_]BLOCK_CACHE   Eric Nelson
• [U-Boot] [RFC V2 PATCH 3/3] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PATCH] sunxi: A83T: fix 32bit overflow warning   Vishnu Patekar
• [U-Boot] [PATCH 0/3] ARM: DRA7: Fix fastboot command   Semen Protsenko
• [U-Boot] [PATCH 1/3] Revert "ARM: DRA7: configs: Prepare for detecting memory > 2GB"   Semen Protsenko
• [U-Boot] [PATCH 2/3] Revert "ARM: DRA7: EMIF: Add 4GB DDR settings"   Semen Protsenko
• [U-Boot] [PATCH 3/3] Revert "ARM: DRA7-evm: Update memory info in banks"   Semen Protsenko
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Sam Protsenko
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Steve Rae
• [U-Boot] [RFC PATCH v1 0/1] Use LS2080A as the only SoC name   York Sun
• [U-Boot] [RFC PATCH v1] armv8: LS2080A: Consolidate LS2080A and LS2085A   York Sun
• [U-Boot] sunxi: A83T: fix 32bit overflow warning   Hans de Goede
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Tom Rini
• [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH v2 1/2] fastboot: sparse: fix block addressing for don't care chunk type   Steve Rae
• [U-Boot] [PATCH v2 2/2] fastboot: sparse: remove unnecessary logging   Steve Rae
• [U-Boot] [PATCH] doc: fix file extension for flattened image tree blob   Andreas Dannenberg
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Tom Rini
• [U-Boot] [PATCH] doc: clarify openssl-based key and certificate generation process   Andreas Dannenberg
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH] arm: mxs: Update MX28EVK config   Marek Vasut
• [U-Boot] [PATCH] arm: lib: Import __do_div64 from Linux   Marek Vasut
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Tom Rini
• [U-Boot] [PATCH] arm: mxs: Update MX28EVK config   Fabio Estevam
• [U-Boot] [PATCH v4 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH] efi_loader: Fix some entry/exit points   Alexander Graf
• [U-Boot] [PATCH v4 5/5] bcm2835 video: Map fb as cached   Stephen Warren
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 1/2] ARM: keystone2: Refactor MSMC macros to avoid #ifdeffery   Lokesh Vutla
• [U-Boot] [PATCH 2/2] ARM: keystone2: Add missing privilege ID settings   Lokesh Vutla
• [U-Boot] [PATCH 1/5] ARM: bcm2835: move CONFIG_BCM283* to Kconfig   Stephen Warren
• [U-Boot] [PATCH 2/5] rpi: use constant "unknown board" DT filename   Stephen Warren
• [U-Boot] [PATCH 3/5] rpi: add Raspberry Pi 3 board ID   Stephen Warren
• [U-Boot] [PATCH 4/5] ARM: bcm2835: expand Kconfig target descriptions   Stephen Warren
• [U-Boot] [PATCH 5/5] rpi: BCM2837 and Raspberry Pi 3 32-bit support   Stephen Warren
• [U-Boot] [RFC PATCH] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Lokesh Vutla
• [U-Boot] [PATCH 0/3] ARM: DRA7: Fix fastboot command   Lokesh Vutla
• [U-Boot] [PATCH v3 0/4] net: phy: Force master mode for RTL8211C on some boards   Michael Haas
• [U-Boot] [PATCH v3 1/4] net: phy: Optionally force master mode for RTL PHY   Michael Haas
• [U-Boot] [PATCH v3 2/4] net: phy: Force master mode for A20-Olimex-SOM-EVB   Michael Haas
• [U-Boot] [PATCH v3 3/4] net: phy: Force master mode A20-OLinuXino-Lime2   Michael Haas
• [U-Boot] [PATCH v3 4/4] net: phy: Add RTL8211X_PHY_FORCE_MASTER to Kconfig   Michael Haas
• [U-Boot] [PATCH v4 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [T1040] Boot location and NOR flash memory mapping   Valentin Longchamp
• [U-Boot] Possible mistake in the csu_cslx_ind enum (ns_access.h)   Vincent
• [U-Boot] [PATCH 4/4] ARM: sheevaplug: correct nand partition layout   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: enable generic distro boot config   Stefan Roese
• [U-Boot] [PATCH v0 4/5] arm: mvebu: Fix ddr3_init() cpu config   Stefan Roese
• [U-Boot] [PATCH v2] kirkwood_nand: claim MPP pins on the fly   Stefan Roese
• [U-Boot] [RFC PATCH] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Lukasz Majewski
• [U-Boot] [PATCH v2] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Denis Bakhvalov
• [U-Boot] [PATCH] gpio: Add DM GPIO driver for Marvell MVEBU   Stefan Roese
• [U-Boot] [PATCH] fpga: altera: Add StratixV support   Stefan Roese
• [U-Boot] [PATCH 1/3] arm: mvebu: Add some SPI CS attributes   Stefan Roese
• [U-Boot] [PATCH 2/3] arm: mvebu: spi.h: Add registers for direct write access   Stefan Roese
• [U-Boot] [PATCH 3/3 v2] arm: mvebu: theadorable: Add StratixV FPGA programming support   Stefan Roese
• [U-Boot] [RFC PATCH] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Lokesh Vutla
• [U-Boot] [PATCH] arm: mvebu: db-88f6820: Drop obsolete binary.0 placeholder   Stefan Roese
• [U-Boot] [PATCH 1/2] tools: kwboot: Clean up usage text   Stefan Roese
• [U-Boot] [PATCH 2/2] tools: kwboot: Add xmodem timeout option   Stefan Roese
• [U-Boot] [PATCH] mvebu: usb: Add missing controller reset after initialization   Stefan Roese
• [U-Boot] [PATCH] tools/kwboot.c: Support UART fallback mode   Stefan Roese
• [U-Boot] [PATCH v5 5/5] bcm2835 video: Map fb as cached   Alexander Graf
• [U-Boot] [PATCH] mvebu: usb: Add missing controller reset after initialization   Phil Sutter
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] Variable content dump to memory   Nicolae Rosia
• [U-Boot] [PATCH] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Lokesh Vutla
• [U-Boot] [RFC PATCH] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Lukasz Majewski
• [U-Boot] cli_simple_run_command results in an unknown reference to "do_bootd" or "parse_string_outer"   Hugo Heutinck
• [U-Boot] [PATCH v3 0/4] net: phy: Force master mode for RTL8211C on some boards   Hans de Goede
• [U-Boot] [PATCH v3 0/4] net: phy: Force master mode for RTL8211C on some boards   Chen-Yu Tsai
• [U-Boot] [PATCH] mtd: nand: denali: max_banks calculation changed in revision 5.1   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: make u-boot-with-spl.bin really available   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: add sramupdate command   Masahiro Yamada
• [U-Boot] [PATCH 00/10] ARM: uniphier: driver updates for ARMv8 SoCs support   Masahiro Yamada
• [U-Boot] [PATCH 01/10] serial: uniphier: use devm_get_addr() to get base address   Masahiro Yamada
• [U-Boot] [PATCH 02/10] clk: uniphier: use devm_get_addr() to get base address   Masahiro Yamada
• [U-Boot] [PATCH 03/10] i2c: uniphier: use devm_get_addr() to get base address   Masahiro Yamada
• [U-Boot] [PATCH 04/10] gpio: uniphier: use devm_get_addr() to get base address   Masahiro Yamada
• [U-Boot] [PATCH 05/10] mmc: uniphier: use devm_get_addr() to get base address   Masahiro Yamada
• [U-Boot] [PATCH 06/10] pinctrl: uniphier: use devm_get_addr() to get base address   Masahiro Yamada
• [U-Boot] [PATCH 07/10] pinctrl: uniphier: introduce quirks flags   Masahiro Yamada
• [U-Boot] [PATCH 08/10] pinctrl: uniphier: support per-pin input enable quirk for new SoCs   Masahiro Yamada
• [U-Boot] [PATCH 09/10] pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 10/10] pinctrl: uniphier: support UniPhier PH1-LD11 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 0/3] ARM: DRA7: Fix fastboot command   Sam Protsenko
• [U-Boot] [PATCH] usb: gadget: Move CONFIG_USB_GADGET to Kconfig   Sam Protsenko
• [U-Boot] [PATCH v2] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Marek Vasut
• [U-Boot] Possible mistake in the csu_cslx_ind enum (ns_access.h)   york sun
• [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"   Tom Rini
• [U-Boot] [PATCH] driver: net: ldpaa_eth: return number of buffer seeded   york sun
• [U-Boot] Variable content dump to memory   James Chargin
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH v3] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Denis Bakhvalov
• [U-Boot] Need help debugging problem with u-boot cache_v7.c when build with gcc6   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: Add conditional magic sram poke for A33   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Print soc-id from sram controller for sun8i boards   Hans de Goede
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Tom Rini
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Sergey Kubushyn
• [U-Boot] [PATCH 5/5] rpi: BCM2837 and Raspberry Pi 3 32-bit support   Stephen Warren
• [U-Boot] [PATCH v5 5/5] bcm2835 video: Map fb as cached   Stephen Warren
• [U-Boot] [PATCH] armv8: ls1043aqds: make sure fixed-link property is big endian   shh.xie at gmail.com
• [U-Boot] [PATCH v2 0/5] Enable caches for the RPi2   Stephen Warren
• [U-Boot] [PATCH V2 1/5] ARM: bcm2835: move CONFIG_BCM283* to Kconfig   Stephen Warren
• [U-Boot] [PATCH V2 2/5] rpi: use constant "unknown board" DT filename   Stephen Warren
• [U-Boot] [PATCH V2 3/5] rpi: add Raspberry Pi 3 board ID   Stephen Warren
• [U-Boot] [PATCH V2 4/5] ARM: bcm2835: expand Kconfig target descriptions   Stephen Warren
• [U-Boot] [PATCH V2 5/5] rpi: BCM2837 and Raspberry Pi 3 32-bit support   Stephen Warren
• [U-Boot] [PATCH] driver: net: ldpaa_eth: return number of buffer seeded   Prabhakar Kushwaha
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] sunxi: Add conditional magic sram poke for A33   Ian Campbell
• [U-Boot] [PATCH v4 0/3] net: phy: Force master mode for RTL8211C on some boards   Michael Haas
• [U-Boot] [PATCH v4 1/3] net: phy: Optionally force master mode for RTL PHY   Michael Haas
• [U-Boot] [PATCH v4 2/3] sunxi: A20-Olimex-SOM-EVB: Force 8211CL to master   Michael Haas
• [U-Boot] [PATCH v4 3/3] sunxi: A20-OLinuXino-Lime2: Force 8211CL to master   Michael Haas
• [U-Boot] Linux hangs due to commit v2015.10-15-g02cc27c on loading i2c-mv64xx   Michael Haas
• [U-Boot] Variable content dump to memory   Nicolae Rosia
• [U-Boot] [PATCH] imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask   Peng Fan
• [U-Boot] [PATCH 1/3] imx: mx6ul: skip setting ahb rate   Peng Fan
• [U-Boot] [PATCH] dm: i2c: mxc_i2c: implement i2c_idle_bus   Peng Fan
• [U-Boot] ENV library broken with setenv/printenv argument structs   Stefano Babic
• [U-Boot] [PATCH] imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask   Stefano Babic
• [U-Boot] A problem about 'sf probe' using DM_SPI   Qianyu Gong
• [U-Boot] [PATCH] Common: SPL: spl_nand: Fixed debug correct NAND ECC type.   Ahmed Samir Khalil
• [U-Boot] [PATCH 1/3] imx: mx6ul: skip setting ahb rate   Stefano Babic
• [U-Boot] [PATCH] mx27: 16-bit wide watchdog registers   Stefano Babic
• [U-Boot] [PATCH v2] mx6sabresd: Use VESA 1024x768 timings   Stefano Babic
• [U-Boot] [PATCH] Common: SPL: spl_nand: Fixed debug correct NAND ECC type.   Tom Rini
• [U-Boot] [PATCH v2 2/2] warp7: Add initial support   Fabio Estevam
• [U-Boot] [PATCH] tools: env: bug: config structs must be defined in tools library   Andreas Fenkart
• [U-Boot] ENV library broken with setenv/printenv argument structs   Andreas Fenkart
• [U-Boot] [PATCH] mx6sabresd: Remove unneeded enable_lvds() function   Fabio Estevam
• [U-Boot] [PATCH v2] usb: gadget: Move CONFIG_USB_GADGET to Kconfig   Semen Protsenko
• [U-Boot] Variable content dump to memory   James Chargin
• [U-Boot] Ethernet via USB on Sinlinx SinA33   Quentin Schulz
• [U-Boot] [PATCH v5 0/3] net: phy: Force master mode for RTL8211C on some boards   Michael Haas
• [U-Boot] [PATCH v5 1/3] net: phy: Optionally force master mode for RTL PHY   Michael Haas
• [U-Boot] [PATCH v5 2/3] sunxi: A20-Olimex-SOM-EVB: Force 8211CL to master   Michael Haas
• [U-Boot] [PATCH v5 3/3] sunxi: A20-OLinuXino-Lime2: Force 8211CL to master   Michael Haas
• [U-Boot] Issue with ALLOC_CACHE_ALIGN_BUFFER in env_relocate_spec and   Vincent
• [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT   Eric Nelson
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Eric Nelson
• [U-Boot] [PATCH 2/6] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Joe Hershberger
• [U-Boot] [PATCH 2/6 v3] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375   Joe Hershberger
• [U-Boot] [PATCH v5 1/3] net: phy: Optionally force master mode for RTL PHY   Joe Hershberger
• [U-Boot] [PATCH v3 2/4] net: phy: Force master mode for A20-Olimex-SOM-EVB   Joe Hershberger
• [U-Boot] [PATCH v3 3/4] net: phy: Force master mode A20-OLinuXino-Lime2   Joe Hershberger
• [U-Boot] [PATCH] driver: net: fsl-mc: Free dflt_dpio pointer after its usage   Joe Hershberger
• [U-Boot] [PATCH 2/4] driver: net: fsl-mc: Check NULL before pointer dereference   Joe Hershberger
• [U-Boot] [PATCH] net: rtl8169: Fix build error when DEBUG is on   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only   Joe Hershberger
• [U-Boot] [PATCH v3 09/21] eth: asix88179: Print packet length properly   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: vsc9953: Do not configure disabled ports   Joe Hershberger
• [U-Boot] [PATCH] powerpc: t1040qds: Use generic ethsw commands   Joe Hershberger
• [U-Boot] [PATCH v2] usb: gadget: Move CONFIG_USB_GADGET to Kconfig   Tom Rini
• [U-Boot] [PATCH V2 1/5] ARM: bcm2835: move CONFIG_BCM283* to Kconfig   Tom Rini
• [U-Boot] [PATCH V2 2/5] rpi: use constant "unknown board" DT filename   Tom Rini
• [U-Boot] [PATCH V2 3/5] rpi: add Raspberry Pi 3 board ID   Tom Rini
• [U-Boot] [PATCH V2 4/5] ARM: bcm2835: expand Kconfig target descriptions   Tom Rini
• [U-Boot] [PATCH V2 5/5] rpi: BCM2837 and Raspberry Pi 3 32-bit support   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: keystone2: Refactor MSMC macros to avoid #ifdeffery   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: keystone2: Add missing privilege ID settings   Tom Rini
• [U-Boot] [PATCH] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH v3 3/4] net: phy: Force master mode A20-OLinuXino-Lime2   Iain Paton
• [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache   Eric Nelson
• [U-Boot] [PATCH v3 3/4] net: phy: Force master mode A20-OLinuXino-Lime2   Michael Haas
• [U-Boot] [PATCH v3] arm: socfpga: migration of CONFIG_SPI_FLASH_BAR   Marek Vasut
• [U-Boot] [RFC PATCH v1] armv8: LS2080A: Consolidate LS2080A and LS2085A   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/6] sniper: Move PXE file address to a viable location   Paul Kocialkowski
• [U-Boot] [PATCH 2/6] kc1: Move PXE file address to a viable location   Paul Kocialkowski
• [U-Boot] [PATCH 3/6] sniper: Include explicit serial baudrate on bootargs   Paul Kocialkowski
• [U-Boot] [PATCH 4/6] kc1: Include explicit serial baudrate on bootargs   Paul Kocialkowski
• [U-Boot] [PATCH 5/6] kc1: Select libfdt to allow running devicetree-based kernels   Paul Kocialkowski
• [U-Boot] [PATCH 6/6] kc1: Add some sysboot and devicetree-related environment variables   Paul Kocialkowski
• [U-Boot] [PATCH 1/2] warp7: Pass the UART base definition   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file   Fabio Estevam
• [U-Boot] [PATCH 1/6] sniper: Move PXE file address to a viable location   Tom Rini
• [U-Boot] [PATCH 3/6] sniper: Include explicit serial baudrate on bootargs   Tom Rini
• [U-Boot] [PATCH 4/6] kc1: Include explicit serial baudrate on bootargs   Tom Rini
• [U-Boot] [PATCH 5/6] kc1: Select libfdt to allow running devicetree-based kernels   Tom Rini
• [U-Boot] [PATCH 6/6] kc1: Add some sysboot and devicetree-related environment variables   Tom Rini
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] ENV library broken with setenv/printenv argument structs   Stefano Babic
• [U-Boot] [PATCH] tools: env: bug: config structs must be defined in tools library   Stefano Babic
• [U-Boot] a few questions about u-boot POST tests   Robert P. J. Day
• [U-Boot] [PATCH] post: Remove reference to deleted "lwmon" board from Makefile   Robert P. J. Day
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Tom Rini
• [U-Boot] [U-Boot,v3,10/21] usb: Rename ehci-fsl.h to ehci-ci.h   Tom Rini
• [U-Boot] [U-Boot, v3, 20/21] board: Add Qualcomm Dragonboard 410C support   Tom Rini
• [U-Boot] [PATCH] post: Delete unnecessary bitmask of POST_MANUAL from POST_ALWAYS   Robert P. J. Day
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   york sun
• [U-Boot] [RFC PATCH v1] armv8: LS2080A: Consolidate LS2080A and LS2085A   york sun
• [U-Boot] [PATCH] lib/physmem.c: Switch to __weak for arch_phys_memset   Tom Rini
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Eric Nelson
• [U-Boot] [PATCH] jffs2: Fix set but not used warning   Tom Rini
• [U-Boot] [PATCH 0/3] Add cache for block devices   Eric Nelson
• [U-Boot] [PATCH 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [PATCH 2/3] mmc: use block layer in mmc command   Eric Nelson
• [U-Boot] [PATCH 3/3] sata: use block layer for sata command   Eric Nelson
• [U-Boot] [PATCH 0/5] Basic support for Amlogic GXBaby and ODROID-C2   Beniamino Galvani
• [U-Boot] [PATCH 1/5] arm: add initial support for Amlogic Meson and ODROID-C2   Beniamino Galvani
• [U-Boot] [PATCH 2/5] arm: dts: import Meson files   Beniamino Galvani
• [U-Boot] [PATCH 3/5] serial: add support for Amlogic Meson UART   Beniamino Galvani
• [U-Boot] [PATCH 4/5] arm: meson: use device tree   Beniamino Galvani
• [U-Boot] [PATCH 5/5] meson: odroid-c2: enable serial   Beniamino Galvani
• [U-Boot] bootp: Prevent u-boot from using others bootp responses.   Tom Rini
• [U-Boot] [U-Boot, RESEND, 1/2] stm32: stm32f4: move flash driver to mtd driver location   Tom Rini
• [U-Boot] [U-Boot, RESEND, 2/2] stm32f746-disco: enable flash support   Tom Rini
• [U-Boot] [U-Boot, 1/6] tools: env: replace WHITESPACE macro by isblank   Tom Rini
• [U-Boot] [U-Boot, 2/6] tools: env: fw_string_blank: return from loop when item found   Tom Rini
• [U-Boot] [U-Boot, 3/6] tools: env: split fw_string_blank into skip_chars / skip_blanks   Tom Rini
• [U-Boot] [U-Boot, 4/6] tools: env: fw_parse_script: simplify removal of newline/carriage return   Tom Rini
• [U-Boot] [U-Boot, 1/3] ARM: keystone2: Convert BOOTBITMASK to static inline function   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: keystone2: Convert BOOT_READ_BITFIELD into static inline function   Tom Rini
• [U-Boot] [U-Boot, 3/3] ARM: keystone2: Convert BOOT_SET_BITFIELD into static inline function   Tom Rini
• [U-Boot] efi_loader: Add GOP support   Tom Rini
• [U-Boot] [U-Boot, 1/7] ARM: DRA72x: Add support for detection of SR2.0   Tom Rini
• [U-Boot] [U-Boot, 2/7] ARM: DRA7: hwdata: Update ioreg data for DRA72 SR2.0   Tom Rini
• [U-Boot] [U-Boot, 3/7] ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0   Tom Rini
• [U-Boot] [U-Boot, 4/7] board: ti: DRA72: revC evm: Update sdram timing configuration for SR2.0   Tom Rini
• [U-Boot] [U-Boot, 5/7] ARM: OMAP5/DRA7: Split iodelay functionality into sub steps   Tom Rini
• [U-Boot] [U-Boot,6/7] ARM: OMAP5/DRA7: Expose do_set_iodelay   Tom Rini
• [U-Boot] [U-Boot, 7/7] board: ti: DRA7: Add DRA72-rev C evm pinmux   Tom Rini
• [U-Boot] [U-Boot, v2, 1/5] arm64: Add 32bit arm compatible dcache definitions   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] arm: Add support for HYP mode and LPAE page tables   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] lcd: Fix compile warning in 64bit mode   Tom Rini
• [U-Boot] [U-Boot,v2,4/5] RPi: Enable caches for rpi2   Tom Rini
• [U-Boot] doc/README.clang: Document sandbox instructions   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: bcm283x: don't always define CONFIG_BCM2835   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: bcm2835: fix 64-bit build warning in mbox   Tom Rini
• [U-Boot] mmc: bcm2835: fix 64-bit build warning   Tom Rini
• [U-Boot] bootp: Prevent u-boot from using others bootp responses.   Tom Rini
• [U-Boot] [U-Boot, 1/3] Fix typo in chosen parameter in vf610-twr.dts   Tom Rini
• [U-Boot] [U-Boot, 2/3] Fix typo in chosen parameter of pcm052.dts   Tom Rini
• [U-Boot] [U-Boot, 3/3] Fix typo choosen in comments and printf logs   Tom Rini
• [U-Boot] [U-Boot,v2,1/2] mmc: Fix switch..case indention   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] mmc: Print send_cmd response only when return value is zero   Tom Rini
• [U-Boot] net: rtl8169: Fix build error when DEBUG is on   Tom Rini
• [U-Boot] [U-Boot, 1/2] efi_stub: Move carriage return before line feed in putc()   Tom Rini
• [U-Boot] [U-Boot, 2/2] debug_uart: Remove duplicated carriage return handling   Tom Rini
• [U-Boot] [U-Boot, 1/2] net: export eth_setenv_enetaddr_by_index() to net.h   Tom Rini
• [U-Boot] [U-Boot, 2/2] board: ti: am57xx: Set ethernet MAC addresses from EEPROM to env   Tom Rini
• [U-Boot] [U-Boot,V2] serial: add BCM283x mini UART driver   Tom Rini
• [U-Boot] cmd: spi: check return value of strdup   Tom Rini
• [U-Boot] [U-Boot,01/11] zipitz2: restore board support   Tom Rini
• [U-Boot] [U-Boot,02/11] zipitz2: enable LCD rotation   Tom Rini
• [U-Boot] [U-Boot, 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Tom Rini
• [U-Boot] [U-Boot,04/11] zipitz2: enable libfdt   Tom Rini
• [U-Boot] [U-Boot,05/11] pxa-common: pxa27x has 3 OHCI ports   Tom Rini
• [U-Boot] [U-Boot,06/11] zipitz2: enable USB host support   Tom Rini
• [U-Boot] [U-Boot,07/11] pxa: start.S: enable SRAM clock   Tom Rini
• [U-Boot] [U-Boot,08/11] pxa: add support for D- and I- caches   Tom Rini
• [U-Boot] [U-Boot,09/11] pxa_lcd: make driver cache-aware   Tom Rini
• [U-Boot] [U-Boot,10/11] zipitz2: enable caches   Tom Rini
• [U-Boot] [U-Boot, 11/11] cfi_flash: return device into read array mode after reading status   Tom Rini
• [U-Boot] efi_loader: Fix some entry/exit points   Tom Rini
• [U-Boot] [U-Boot,v5,5/5] bcm2835 video: Map fb as cached   Tom Rini
• [U-Boot] ARM: asm: types: Introduce DMA_ADDR_T_64BIT   Tom Rini
• [U-Boot] tools: env: bug: config structs must be defined in tools library   Tom Rini
• [U-Boot] [U-Boot, 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Marek Vasut
• [U-Boot] [U-Boot,09/11] pxa_lcd: make driver cache-aware   Marek Vasut
• [U-Boot] [U-Boot, 03/11] pxa_lcd: invert colors for Zipit Z2 to get white on black palette   Tom Rini
• [U-Boot] [U-Boot,09/11] pxa_lcd: make driver cache-aware   Tom Rini
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)   Bin Meng
• [U-Boot] Possible mistake in the csu_cslx_ind enum (ns_access.h)   Huan Wang
• [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion   Heiko Schocher
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] [PATCH] drivers: net: ldpaa: Memset pools_params as "0" before use   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Prabhakar Kushwaha
• [U-Boot] [PATCH 5/5] meson: odroid-c2: enable serial   Carlo Caione
• [U-Boot] [PATCH 0/5] Basic support for Amlogic GXBaby and ODROID-C2   Carlo Caione
• [U-Boot] [PATCH] common: env_sf: Add exclamation mark   Peng Fan
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH] common: env: support sata device   Peng Fan
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] what is the purpose of the "init_f" function pointer in struct post_test?   Robert P. J. Day
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH 1/6] sniper: Move PXE file address to a viable location   Paul Kocialkowski
• [U-Boot] [PATCH 6/6] kc1: Add some sysboot and devicetree-related environment variables   Paul Kocialkowski
• [U-Boot] [PATCH 1/7] sniper: Include explicit serial baudrate on bootargs   Paul Kocialkowski
• [U-Boot] [PATCH 2/7] kc1: Include explicit serial baudrate on bootargs   Paul Kocialkowski
• [U-Boot] [PATCH 3/7] kc1: Select libfdt to allow running devicetree-based kernels   Paul Kocialkowski
• [U-Boot] [PATCH 4/7] kc1: Add some sysboot and devicetree-related environment variables   Paul Kocialkowski
• [U-Boot] [PATCH 5/7] sniper: Proper reboot mode and boot reason validation   Paul Kocialkowski
• [U-Boot] [PATCH 6/7] kc1: Proper reboot mode and boot reason validation   Paul Kocialkowski
• [U-Boot] [PATCH 7/7] sniper: Change vendor name from lge to lg, matching devicetree vendor prefix   Paul Kocialkowski
• [U-Boot] [PATCH] ARM: dts: uniphier: add clock-frequency for LD11/LD20 DTSI   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: add NAND pinmux node   Masahiro Yamada
• [U-Boot] (brief?) question on POST, post_test "void (*reloc) (void)" member   Robert P. J. Day
• [U-Boot] [PATCH v5 1/3] net: phy: Optionally force master mode for RTL PHY   Hans de Goede
• [U-Boot] Ethernet via USB on Sinlinx SinA33   Hans de Goede
• [U-Boot] Linux hangs due to commit v2015.10-15-g02cc27c on loading i2c-mv64xx   Hans de Goede
• [U-Boot] [PATCH] ARM: dts: uniphier: move aliases node up to make fdtgrep happy   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: add PH1-LD20 SoC support   Masahiro Yamada
• [U-Boot] [PATCH] post: Remove references to scrapped "netta" board.   Robert P. J. Day
• [U-Boot] [PATCH v7 00/87] mtd: Add SPI-NOR core support   Tom Rini
• [U-Boot] [PATCH 6/6] kc1: Add some sysboot and devicetree-related environment variables   Tom Rini
• [U-Boot] [PATCH] common: env_sf: Add exclamation mark   Tom Rini
• [U-Boot] [PATCH 1/7] sniper: Include explicit serial baudrate on bootargs   Tom Rini
• [U-Boot] [PATCH 2/7] kc1: Include explicit serial baudrate on bootargs   Tom Rini
• [U-Boot] [PATCH 3/7] kc1: Select libfdt to allow running devicetree-based kernels   Tom Rini
• [U-Boot] [PATCH 4/7] kc1: Add some sysboot and devicetree-related environment variables   Tom Rini
• [U-Boot] [PATCH 5/7] sniper: Proper reboot mode and boot reason validation   Tom Rini
• [U-Boot] [PATCH 6/7] kc1: Proper reboot mode and boot reason validation   Tom Rini
• [U-Boot] [PATCH 7/7] sniper: Change vendor name from lge to lg, matching devicetree vendor prefix   Tom Rini
• [U-Boot] [PATCH 1/3] drivers: block: add block device cache   Tom Rini
• [U-Boot] [PATCH 2/3] mmc: use block layer in mmc command   Tom Rini
• [U-Boot] [PATCH 3/3] sata: use block layer for sata command   Tom Rini
• [U-Boot] [PATCH 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] is "quicc engine" supported on non-powerpc architectures?   Robert P. J. Day
• [U-Boot] [PATCH] common: env: support sata device   Tom Rini
• [U-Boot] [PATCH v5 1/3] net: phy: Optionally force master mode for RTL PHY   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: ldpaa: Memset pools_params as "0" before use   Joe Hershberger
• [U-Boot] [PATCH v2 2/2] board: README.sandbox: Update dm test command   Jagan Teki
• [U-Boot] [PATCH v2 1/2] doc: driver-model: Update dm tests run using test.py   Jagan Teki
• [U-Boot] [PATCH V2 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [PATCH 1/9] imx: imx6qdl: add device tree files for i.MX6DQ   Eric Nelson
• [U-Boot] [PATCH 1/9] imx: imx6qdl: add device tree files for i.MX6DQ   Eric Nelson
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   york sun
• [U-Boot] should include/post.h have MPC8360-related macro refer to "CPM_POST_WORD_ADDR"?   Robert P. J. Day
• [U-Boot] [PATCH] arm: spl: Align default board_init_f comment with code   Andreas Dannenberg
• [U-Boot] [PATCH v2 0/1] Use LS2080A as the only SoC name   York Sun
• [U-Boot] [PATCH v2] armv8: LS2080A: Consolidate LS2080A and LS2085A   York Sun
• [U-Boot] [PATCH] configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time   Vitaly Andrianov
• [U-Boot] [PATCH] board: ge: bx50v3: Update display setup   Akshay Bhat
• [U-Boot] [PATCH] armv8/LSCH2: early and final mmu needs matching NS attribute   Ed Swarthout
• [U-Boot] [PATCH] configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time   Tom Rini
• [U-Boot] [RFC] SPL -> U-Boot Chain of Trust   Andreas Dannenberg
• [U-Boot] [PATCH RESEND] armv8: LSCH2 early and final mmu needs matching NS attribute   Ed Swarthout
• [U-Boot] [PATCH] buildman: allow more incremental building   Stephen Warren
• [U-Boot] [PATCH RESEND] armv8: LSCH2 early and final mmu needs matching NS attribute   york sun
• [U-Boot] [PATCH V3] fsl: esdhc: support driver model   Peng Fan
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   york sun
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   Peng Fan
• [U-Boot] [PATCH] common: env: support sata device   Peng Fan
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   york sun
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] Newbie SPL question for socfpga_sockit   George Broz
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   Peng Fan
• [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure   York Sun
• [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT   Peng Fan
• [U-Boot] Ethernet via USB on Sinlinx SinA33   Quentin Schulz
• [U-Boot] [PATCH 0/1] ls102xa: Indexes of CSU slave is incorrect   Vincent Siles
• [U-Boot] [PATCH] arm: Fix order of CSU indexes in ns_access.h   Vincent Siles
• [U-Boot] [PATCH 5/5] lib: Enable private libgcc by default   Albert ARIBAUD
• [U-Boot] [PATCH] test/dm/core.c: Make pre-reloc test use pre-reloc struct   Simon Glass
• [U-Boot] Ethernet via USB on Sinlinx SinA33   Hans de Goede
• [U-Boot] [PATCH] arm64: booti: add missing unmap_sysmem()   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: drop unneeded defines related to legacy serial driver   Masahiro Yamada
• [U-Boot] how does one "extend" the list of POST tests?   Robert P. J. Day
• [U-Boot] [PATCH] ARM: uniphier: adjust dram_init() and dram_init_banksize() for ARM64   Masahiro Yamada
• [U-Boot] [PATCH] configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time   Vitaly Andrianov
• [U-Boot] how does one "extend" the list of POST tests?   Robert P. J. Day
• [U-Boot] [PATCH 6/7] kc1: Proper reboot mode and boot reason validation   Paul Kocialkowski
• [U-Boot] [PATCH v2 1/7] sniper: Include explicit serial baudrate on bootargs   Paul Kocialkowski
• [U-Boot] [PATCH v2 2/7] kc1: Include explicit serial baudrate on bootargs   Paul Kocialkowski
• [U-Boot] [PATCH v2 3/7] kc1: Select libfdt to allow running devicetree-based kernels   Paul Kocialkowski
• [U-Boot] [PATCH v2 4/7] kc1: Add some sysboot and devicetree-related environment variables   Paul Kocialkowski
• [U-Boot] [PATCH v2 5/7] sniper: Proper reboot mode and boot reason validation   Paul Kocialkowski
• [U-Boot] [PATCH v2 6/7] kc1: Proper reboot mode and boot reason validation   Paul Kocialkowski
• [U-Boot] [PATCH v2 7/7] sniper: Change vendor name from lge to lg, matching devicetree vendor prefix   Paul Kocialkowski
• [U-Boot] [PATCH v2] armv8: LS2080A: Consolidate LS2080A and LS2085A   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/6] Add Pine64 support   Alexander Graf
• [U-Boot] [PATCH 1/6] sunxi: Move cpu independent code to mach directory   Alexander Graf
• [U-Boot] [PATCH 2/6] sunxi: Depend SPL configs on SUPPORT_SPL   Alexander Graf
• [U-Boot] [PATCH 3/6] arm: Allow u32 as addrs for readX/writeX   Alexander Graf
• [U-Boot] [PATCH 4/6] sunxi: Explicitly cast u32 pointer conversions   Alexander Graf
• [U-Boot] [PATCH 5/6] sunxi: Add support for Allwinner A64 SoCs   Alexander Graf
• [U-Boot] [PATCH 6/6] sunxi: Add Pine64+ support   Alexander Graf
• [U-Boot] [PATCH v2] armv8: LS2080A: Consolidate LS2080A and LS2085A   York Sun
• [U-Boot] [PATCH] armv8: ls2080a: update fdt path for fsl-mc node   York Sun
• [U-Boot] [PATCH] armv8/ls1043a: update env settings for booting kernel   York Sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: don't reconfigure QSPI clock when booting from QSPI   York Sun
• [U-Boot] [PATCH] driver: net: fsl-mc: Free dflt_dpio pointer after its usage   York Sun
• [U-Boot] [PATCH] driver: net: fsl-mc: Check NULL before pointer dereference   York Sun
• [U-Boot] [PATCH 0/6] Add Pine64 support   Hans de Goede
• [U-Boot] [PATCH 3/6] arm: Allow u32 as addrs for readX/writeX   Hans de Goede
• [U-Boot] [PATCH] tools/kwboot.c: Support UART fallback mode   Kevin Smith
• [U-Boot] [PATCH v5 01/14] armv8: ls2080: Add SFP Configs for LS2080   York Sun
• [U-Boot] [PATCH v5 02/14] ls2080: Add configs for SEC, SecMon, SRK and DCFG   York Sun
• [U-Boot] [PATCH v5 03/14] fsl: ls-ch3: Add new header for Secure Boot   York Sun
• [U-Boot] [PATCH v5 04/14] ls2080: Add Secure Boot support   York Sun
• [U-Boot] [PATCH v5 05/14] Add bootscript header addr for ls2080a secure boot   York Sun
• [U-Boot] [PATCH v5 06/14] fsl: ls-ch3: Copy Bootscript and header from NOR to DDR   York Sun
• [U-Boot] [PATCH v5 07/14] ls2080: Change env variable "fdt_high"   York Sun
• [U-Boot] [PATCH v5 08/14] ls2080: Add config for endianess of CCSR GUR   York Sun
• [U-Boot] [PATCH v5 09/14] armv8: fsl-lsch3: Disable SMMU during Secure Boot   York Sun
• [U-Boot] [PATCH v5 10/14] crypto/fsl: Correct 64-bit Write when MMU disabled   York Sun
• [U-Boot] [PATCH v5 11/14] crypto/fsl: Make CAAM transactions cacheable   York Sun
• [U-Boot] [PATCH v5 12/14] SECURE_BOOT: Use default bootargs   York Sun
• [U-Boot] [PATCH v5 13/14] SECURE BOOT: Halt execution when secure boot fail   York Sun
• [U-Boot] [PATCH v5 14/14] SECURE BOOT: Change fsl_secboot_validate func to ret image addr   York Sun
• [U-Boot] [PATCH 1/2] armv8: fsl-layerscape: change LS1043A SVR register   York Sun
• [U-Boot] [PATCH 2/2] armv8: fsl-layerscape: add LS1023A SVR   York Sun
• [U-Boot] [PATCH] armv8/ls1043aqds: dts: set SPI mode for DSPI   York Sun
• [U-Boot] [PATCH][v4] armv8/ls2080ardb: Enable VID support   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH 0/6] Add Pine64 support   Alexander Graf
• [U-Boot] [PATCH RFC 00/17] sunxi: more AXP818 and A83T USB support   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 01/17] power: axp818: Remove undefined axp818_init()   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 02/17] power: axp818: Fix DCDC5 default voltage   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 03/17] power: axp818: Add support for FLDOs   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 04/17] sunxi: h8_homlet_v2: Set DCDC1 to default voltage (3.3V)   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 05/17] sunxi: h8_homlet_v2: Set DLDO4 to 3.3V   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 06/17] sunxi: usb_phy: Add support for A83T USB PHYs   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 07/17] sunxi: clk: Fix USB PHY clock macros for A83T   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 08/17] sunxi: ehci: Add A83T compatible   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 09/17] sunxi: ohci: Add A83T compatible   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 10/17] musb: sunxi: Add support for A83T   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 11/17] sunxi: axp: Generalize register macros for VBUS drive GPIO   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 12/17] sunxi: axp: Support VBUS drive GPIO on AXP818   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 13/17] sunxi: h8_homlet_v2: Enable USB Kconfig options in defconfig   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 14/17] sunxi: Cubietruck Plus: Enable USB Kconfig options in defconfig   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 15/17] [DO NOT MERGE] sunxi: Add USB and R_PIO nodes to sun8i-a83t.dtsi   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 16/17] [DO NOT MERGE] sunxi: Enable USB on Cubietruck Plus   Chen-Yu Tsai
• [U-Boot] [PATCH RFC 17/17] [DO NOT MERGE] sunxi: Enable USB nodes for H8Homlet v2   Chen-Yu Tsai
• [U-Boot] [PATCH] arm64: booti: add missing unmap_sysmem()   Joe Hershberger
• [U-Boot] [PATCHv3 2/2] Add support the Avionic Design Meerkat COM and Kein Baseboard   Tom Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] Newbie SPL question for socfpga_sockit   Marek Vasut
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Scott Wood
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] [PATCH 5/5] meson: odroid-c2: enable serial   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH] ARM: uniphier: enable eMMC on PH1-sLD3 reference board   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: add pin-mux settings for NAND, eMMC, SD of PH1-sLD3   Masahiro Yamada
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Qianyu Gong
• [U-Boot] [RFC v1 PATCH 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx   Mario Six
• [U-Boot] [PATCH 0/6] Add Pine64 support   Hans de Goede
• [U-Boot] [PATCH v1] tpm: Fix uclass_first_device error handling   Mario Six
• [U-Boot] Problem with sf write on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] [PATCH] ARM: uniphier: rename function names ph1_* to uniphier_*   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: Fix typos "privide"   Masahiro Yamada
• [U-Boot] [PATCH v2 0/2] ARM: uniphier: add ARMv8 SoCs support   Masahiro Yamada
• [U-Boot] [PATCH v2 1/2] ARM: uniphier: add PH1-LD20 SoC support   Masahiro Yamada
• [U-Boot] [PATCH v2 2/2] ARM: uniphier: add PH1-LD11 SoC support   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: remove CONFIG_ARP_TIMEOUT define   Masahiro Yamada
• [U-Boot] Issue with ALLOC_CACHE_ALIGN_BUFFER in env_relocate_spec and   Vincent
• [U-Boot] Problem with sf write on Arria 5.   Marek Vasut
• [U-Boot] Custom configurations   Jan Danielsson
• [U-Boot] Problem with sf write on Arria 5.   Bakhvalov, Denis (Nokia - PL/Wroclaw)
• [U-Boot] Problem with sf write on Arria 5.   Chin Liang See
• [U-Boot] Problem with sf write on Arria 5.   Marek Vasut
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Stephen Warren
• [U-Boot] [PATCH] efi_loader: Always allocate the highest available address   Alexander Graf
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Tom Rini
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Stephen Warren
• [U-Boot] [RFC v1 PATCH 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx   York Sun
• [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64   Alexander Graf
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [PATCH] board: ti: DRA7: Add DP83867 TI phy for rev c   Dan Murphy
• [U-Boot] [PATCH 0/5] Basic support for Amlogic GXBaby and ODROID-C2   Beniamino Galvani
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Stephen Warren
• [U-Boot] [PATCH 5/5] meson: odroid-c2: enable serial   Beniamino Galvani
• [U-Boot] [PATCH 5/5] meson: odroid-c2: enable serial   Beniamino Galvani
• [U-Boot] [PATCH] sf: params: Add support for n25q016a   Moritz Fischer
• [U-Boot] Tegra-specific header file location   Stephen Warren
• [U-Boot] [PATCH 01/11] arm: config: Introduce CONFIG_SYS_ARM_ARCH   Marek Vasut
• [U-Boot] [PATCH 02/11] arm: include: Import unified.h from Linux kernel   Marek Vasut
• [U-Boot] [PATCH 03/11] arm: lib: Drop underscore from private libgcc filenames   Marek Vasut
• [U-Boot] [PATCH 04/11] arm: lib: Sync libgcc shift operations   Marek Vasut
• [U-Boot] [PATCH 05/11] arm: lib: Sync libgcc 32b division/modulo operations   Marek Vasut
• [U-Boot] [PATCH 06/11] arm: lib: Fix uldivmod.S build on Thumb2   Marek Vasut
• [U-Boot] [PATCH 07/11] arm: lib: Import __do_div64 from Linux   Marek Vasut
• [U-Boot] [PATCH 08/11] arm: lib: Repair Warning: conditional infixes are deprecated in unified syntax   Marek Vasut
• [U-Boot] [PATCH 09/11] arm: lib: import muldi3.S from Linux   Marek Vasut
• [U-Boot] [PATCH 10/11] arm: lib: Import Thumb1 functions   Marek Vasut
• [U-Boot] [PATCH 11/11] lib: Enable private libgcc by default   Marek Vasut
• [U-Boot] [PATCH] sf: params: Add support for n25q016a   Marek Vasut
• [U-Boot] [PATCH] sf: params: Add support for n25q016a   Moritz Fischer
• [U-Boot] [PATCH] armv8/fsl-layerscape: add IFC fixup for LS1043A with QSPI enabled   Scott Wood
• [U-Boot] [PATCH V2] common: env: support sata device   Peng Fan
• [U-Boot] [PATCH] dm: core: device: set pinctrl state for pinctrl device   Peng Fan
• [U-Boot] [PATCH] board: ti: DRA7: Add DP83867 TI phy for rev c   Mugunthan V N
• [U-Boot] [PATCH] arm: Fix order of CSU indexes in ns_access.h   Huan Wang
• [U-Boot] [RFC v1 PATCH 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx   Mario Six
• [U-Boot] Tegra-specific header file location   Masahiro Yamada
• [U-Boot] [PATCH] ARM: zynq: zybo: Enabling reading MAC address from EEPROM   Michal Simek
• [U-Boot] [PATCH] test/py: Add support for loading image via tftp to specified location   Michal Simek
• [U-Boot] [PATCH] ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBO   Michal Simek
• [U-Boot] [PATCH 1/2] microblaze: Read information about timer/interrupts from DT   Michal Simek
• [U-Boot] [PATCH 2/2] microblaze: Remove !OF_CONTROL code for timer and interrupt   Michal Simek
• [U-Boot] [PATCH] net: axi_emac: Report phy-node error message permanently   Michal Simek
• [U-Boot] [PATCH 1/6] ARM64: zynqmp: Decrease boot delay   Michal Simek
• [U-Boot] [PATCH 2/6] ARM64: zynqmp: Enable FAT write and EXT4 write for USB too   Michal Simek
• [U-Boot] [PATCH 3/6] ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig   Michal Simek
• [U-Boot] [PATCH 4/6] ARM64: Move HUSH enabling from board file to defconfig   Michal Simek
• [U-Boot] [PATCH 5/6] ARM64: zynqmp: Read RAM information from DT   Michal Simek
• [U-Boot] [PATCH 6/6] ARM64: zynqmp: Simplify MAINTAINERS file to support more boards   Michal Simek
• [U-Boot] [PATCH] block: Add support for Ceva sata   Michal Simek
• [U-Boot] [PATCH 1/2] ARM: zynq: Enable FLASH_BAR for microzed and zybo   Michal Simek
• [U-Boot] [PATCH 2/2] ARM: zynq: Add uEnv.txt support   Michal Simek
• [U-Boot] [PATCH] net: zynq_gem: Return error incase of invalid phy address   Michal Simek
• [U-Boot] [PATCH 1/2] net: phy: Add SGMII support for TI phy   Michal Simek
• [U-Boot] [PATCH 2/2] net: zynq_gem: Add SGMII support for zynqMP   Michal Simek
• [U-Boot] [PATCH] ARM64: zynqmp: Enable EFI partition support   Michal Simek
• [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property   Michal Simek
• [U-Boot] [PATCH V4 2/3] mx7: psci: add basic psci support   Gary Bisson
• [U-Boot] [PATCH] mips: Report reloc information in bdinfo   tim.chick
• [U-Boot] [PATCH v5 0/3] net: phy: Force master mode for RTL8211C on some boards   Hans de Goede
• [U-Boot] [RFC PATCH 1/2] net: phy: ti: Allow the driver to be more configurable   Dan Murphy
• [U-Boot] [RFC PATCH 2/2] board: ti: DRA7: Add in RGMII parameters for rev c   Dan Murphy
• [U-Boot] [PATCH] spi: Support 4 byte address only SPI flash   Tim Chick
• [U-Boot] [PATCH V4 2/3] mx7: psci: add basic psci support   Peng Fan
• [U-Boot] [PATCH] imx: mx6var_som: Add support for Variscite mx6 boards   Eran Matityahu
• [U-Boot] [RFC PATCH 1/2] net: phy: ti: Allow the driver to be more configurable   Dan Murphy
• [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral   Michal Simek
• [U-Boot] [RFC PATCH 1/2] net: phy: ti: Allow the driver to be more configurable   Tom Rini
• [U-Boot] [PATCH V4 2/3] mx7: psci: add basic psci support   Gary Bisson
• [U-Boot] [linux-sunxi] [PATCH RFC 00/17] sunxi: more AXP818 and A83T USB support   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH RFC 06/17] sunxi: usb_phy: Add support for A83T USB PHYs   Hans de Goede
• [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral   Tom Rini
• [U-Boot] [PATCH] mtd: nand: denali: max_banks calculation changed in revision 5.1   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: make u-boot-with-spl.bin really available   Masahiro Yamada
• [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral   Marek Vasut
• [U-Boot] [RFC PATCH 1/2] net: phy: ti: Allow the driver to be more configurable   Dan Murphy
• [U-Boot] [RFC PATCH 1/2] net: phy: ti: Allow the driver to be more configurable   Tom Rini
• [U-Boot] [PATCH] ARM: uniphier: add sramupdate command   Masahiro Yamada
• [U-Boot] [PATCH 00/10] ARM: uniphier: driver updates for ARMv8 SoCs support   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: add clock-frequency for LD11/LD20 DTSI   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: add NAND pinmux node   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: drop unneeded defines related to legacy serial driver   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: adjust dram_init() and dram_init_banksize() for ARM64   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: enable eMMC on PH1-sLD3 reference board   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: add pin-mux settings for NAND, eMMC, SD of PH1-sLD3   Masahiro Yamada
• [U-Boot] [linux-sunxi] [PATCH RFC 00/17] sunxi: more AXP818 and A83T USB support   Chen-Yu Tsai
• [U-Boot] [PATCH] ARM: uniphier: rename function names ph1_* to uniphier_*   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: Fix typos "privide"   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: remove CONFIG_ARP_TIMEOUT define   Masahiro Yamada
• [U-Boot] [RFC v1 PATCH 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx   York Sun
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH] test/py: Add support for loading image via tftp to specified location   Stephen Warren
• [U-Boot] [PATCH] board: ti: DRA7: Add DP83867 TI phy for rev c   Tom Rini
• [U-Boot] [RFC PATCH 1/2] net: phy: ti: Allow the driver to be more configurable   Dan Murphy
• [U-Boot] [PATCHv2] sf: params: Add support for n25q016a   Moritz Fischer
• [U-Boot] [PATCH v3 0/1] Use LS2080A as the only SoC name   York Sun
• [U-Boot] [PATCH v3] armv8: LS2080A: Consolidate LS2080A and LS2085A   York Sun
• [U-Boot] [PATCH 1/7] serial: sh: Add support R8A7795   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/7] ARM: rmobile: Create R-Car 32bit (Gen1 and Gen2) for Kconfig   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/7] ARM: rmobile: Move rcar-gen2-common to rcar-common   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/7] ARM: rmobile: Add support R-Car Generation 3   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/7] ARM: rmobile: Add support R8A7795   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/7] ARM: rmobile: Add support salvator-x board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/7] ARM: rmobile: rcar-common: Fix warning of type difference   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 0/6] Add Pine64 support   Hans de Goede
• [U-Boot] [PATCH 0/6] Add Pine64 support   Alexander Graf
• [U-Boot] [PATCH 0/6] Add Pine64 support   Hans de Goede
• [U-Boot] [PATCH 0/6] Add Pine64 support   Hans de Goede
• [U-Boot] [PATCH v3 0/2] net: phy: mv88e61xx: Revise as a PHY driver   Kevin Smith
• [U-Boot] [PATCH v3 1/2] net: Remove unused mv88e61xx switch driver   Kevin Smith
• [U-Boot] [PATCH v3 2/2] net: phy: Add PHY driver for mv88e61xx switches   Kevin Smith
• [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache   Eric Nelson
• [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT   Eric Nelson
• [U-Boot] [PATCH] arm: socfpga: Nuke useless include   Marek Vasut
• [U-Boot] [PATCH v4 00/21] Add support for 96boards Dragonboard410C board   Mateusz Kulikowski
• [U-Boot] [PATCH v4 01/21] serial: Add support for Qualcomm serial port   Mateusz Kulikowski
• [U-Boot] [PATCH v4 02/21] gpio: Add support for Qualcomm gpio controller   Mateusz Kulikowski
• [U-Boot] [PATCH v4 03/21] mmc: Add support for Qualcomm SDHCI controller   Mateusz Kulikowski
• [U-Boot] [PATCH v4 04/21] ehci-hcd: Add init_after_reset   Mateusz Kulikowski
• [U-Boot] [PATCH v4 05/21] usb: ulpi: Add Kconfig options for ULPI   Mateusz Kulikowski
• [U-Boot] [PATCH v4 06/21] Migrate CONFIG_ULPI* to Kconfig   Mateusz Kulikowski
• [U-Boot] [PATCH v4 07/21] usb: ulpi: Fix viewport_addr type   Mateusz Kulikowski
• [U-Boot] [PATCH v4 08/21] usb: ulpi: Fix compile warning in read/write on 64-bit machines.   Mateusz Kulikowski
• [U-Boot] [PATCH v4 09/21] eth: asix88179: Print packet length properly   Mateusz Kulikowski
• [U-Boot] [PATCH v4 10/21] usb: Rename ehci-fsl.h to ehci-ci.h   Mateusz Kulikowski
• [U-Boot] [PATCH v4 11/21] usb: ehci-ci: Add missing registers.   Mateusz Kulikowski
• [U-Boot] [PATCH v4 12/21] ehci-ci.h: drop generic USBCMD fields   Mateusz Kulikowski
• [U-Boot] [PATCH v4 13/21] ehci: Add support for Qualcomm EHCI   Mateusz Kulikowski
• [U-Boot] [PATCH v4 14/21] drivers: Add SPMI bus uclass   Mateusz Kulikowski
• [U-Boot] [PATCH v4 15/21] spmi: Add sandbox test driver   Mateusz Kulikowski
• [U-Boot] [PATCH v4 16/21] drivers: spmi: Add support for Qualcomm SPMI bus driver   Mateusz Kulikowski
• [U-Boot] [PATCH v4 17/21] pmic: Add support for Qualcomm PM8916 PMIC   Mateusz Kulikowski
• [U-Boot] [PATCH v4 18/21] gpio: Add support for Qualcomm PM8916 gpios   Mateusz Kulikowski
• [U-Boot] [PATCH v4 19/21] arm: Add support for Qualcomm Snapdragon family   Mateusz Kulikowski
• [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support   Mateusz Kulikowski
• [U-Boot] [PATCH v4 21/21] Add myself as Snapdragon and SPMI maintainer   Mateusz Kulikowski