[U-Boot] [PATCH v3 2/3] board:freescale:usb: Remove code duplication for fdt_usb_get_node_type

[Marek Vasut]

On 03/03/2016 09:30 AM, Sriram Dash wrote:
> 
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Wednesday, March 02, 2016 3:57 AM
>> To: Sriram Dash <sriram.dash at nxp.com>; u-boot at lists.denx.de
>> Cc: york sun <york.sun at nxp.com>; Ramneek Mehresh
>> <ramneek.mehresh at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>
>> Subject: Re: [PATCH v3 2/3] board:freescale:usb: Remove code duplication for
>> fdt_usb_get_node_type
>>
>> On 03/01/2016 08:03 AM, Sriram Dash wrote:
>>> Call fdt_usb_get_node_type() from fdt_fixup_usb_mode_phy_type() to
>>> avoid code duplication.
>>>
>>> Signed-off-by: Ramneek Mehresh <ramneek.mehresh at nxp.com>
>>> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
>>> ---
>>>  board/freescale/common/usb.c | 72
>>> ++++++++++++++++++--------------------------
>>>  1 file changed, 29 insertions(+), 43 deletions(-)
>>>
>>> diff --git a/board/freescale/common/usb.c
>>> b/board/freescale/common/usb.c index 85cb1bf..d815dc1 100644
>>> --- a/board/freescale/common/usb.c
>>> +++ b/board/freescale/common/usb.c
>>> @@ -18,33 +18,45 @@
>>>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1  #endif
>>>
>>> -static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>>> -				       const char *phy_type, int start_offset)
>>> +static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>>> +					 int *node_offset)
>>>  {
>>>  	const char *compat_dr = "fsl-usb2-dr";
>>>  	const char *compat_mph = "fsl-usb2-mph";
>>> -	const char *prop_mode = "dr_mode";
>>> -	const char *prop_type = "phy_type";
>>>  	const char *node_type = NULL;
>>> -	int node_offset;
>>> -	int err;
>>>
>>> -	node_offset = fdt_node_offset_by_compatible(blob,
>>> -						    start_offset, compat_mph);
>>> -	if (node_offset < 0) {
>>> -		node_offset = fdt_node_offset_by_compatible(blob,
>>> -							    start_offset,
>>> -							    compat_dr);
>>> -		if (node_offset < 0) {
>>> -			printf("WARNING: could not find compatible node: %s",
>>> -			       fdt_strerror(node_offset));
>>> -			return -1;
>>> +	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
>>> +						     compat_mph);
>>> +	if (*node_offset < 0) {
>>> +		*node_offset = fdt_node_offset_by_compatible(blob,
>>> +							     start_offset,
>>> +							     compat_dr);
>>> +		if (*node_offset < 0) {
>>> +			printf("ERROR: could not find compatible node: %s\n",
>>> +			       fdt_strerror(*node_offset));
>>> +		} else {
>>> +			node_type = compat_dr;
>>>  		}
>>> -		node_type = compat_dr;
>>>  	} else {
>>>  		node_type = compat_mph;
>>>  	}
>>>
>>> +	return node_type;
>>
>> The function should be able to return error code. If you need to return some more
>> stuff from the function, return it via reference.
>>
> 
> This patch is not altering the fdt_usb_get_node_type(). It is only calling the function from
> fdt_fixup_usb_mode_phy_type(), to avoid code duplication. 

I am not complaining about that part. I am complaining about the new
function, fdt_usb_get_node_type(), which returns pointer as a return
value instead of returning proper error code as a return value.

>>> +}
>>> +
>>> +static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>>> +					const char *phy_type, int start_offset) {
>>> +	const char *prop_mode = "dr_mode";
>>> +	const char *prop_type = "phy_type";
>>> +	const char *node_type = NULL;
>>> +	int node_offset;
>>> +	int err;
>>> +
>>> +	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
>>> +	if (!node_type)
>>> +		return -1;
>>> +
>>>  	if (mode) {
>>>  		err = fdt_setprop(blob, node_offset, prop_mode, mode,
>>>  				  strlen(mode) + 1);
>>> @@ -64,32 +76,6 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const
>> char *mode,
>>>  	return node_offset;
>>>  }
>>>
>>> -static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>>> -					 int *node_offset)
>>> -{
>>> -	const char *compat_dr = "fsl-usb2-dr";
>>> -	const char *compat_mph = "fsl-usb2-mph";
>>> -	const char *node_type = NULL;
>>> -
>>> -	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
>>> -						     compat_mph);
>>> -	if (*node_offset < 0) {
>>> -		*node_offset = fdt_node_offset_by_compatible(blob,
>>> -							     start_offset,
>>> -							     compat_dr);
>>> -		if (*node_offset < 0) {
>>> -			printf("ERROR: could not find compatible node: %s\n",
>>> -			       fdt_strerror(*node_offset));
>>> -		} else {
>>> -			node_type = compat_dr;
>>> -		}
>>> -	} else {
>>> -		node_type = compat_mph;
>>> -	}
>>> -
>>> -	return node_type;
>>> -}
>>> -
>>>  static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
>>>  				 int start_offset)
>>>  {
>>>
>>
>>
>> --
>> Best regards,
>> Marek Vasut


-- 
Best regards,
Marek Vasut