[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards

[Yangbo Lu]

When the MMC framework was added in u-boot, the mmc_go_idle was
added before mmc_send_op_cond_iter in function mmc_send_op_cond
annotating that some cards seemed to need this. Actually, we still
need to do this in function mmc_complete_op_cond for those cards.
This has been verified on Micron MTFC4GACAECN eMMC chip.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
---
 drivers/mmc/mmc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index ede5d6e..82e3268 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -418,6 +418,9 @@ static int mmc_complete_op_cond(struct mmc *mmc)
 	uint start;
 	int err;
 
+	/* Some cards seem to need this */
+	mmc_go_idle(mmc);
+
 	mmc->op_cond_pending = 0;
 	if (!(mmc->ocr & OCR_BUSY)) {
 		start = get_timer(0);
-- 
2.1.0.27.g96db324