[U-Boot] [PATCH v2 00/11] armv8: ls2080aqds: Enable QSPI boot support

[Yuan Yao]

From: Yuan Yao <yao.yuan at nxp.com>

This series add support for QSPI boot on LS2080AQDS.

Yuan Yao (11):
  armv8: ls2080aqds: Select QSPI CLK div via SCFG
  configs: ls2080a_common: Remove duplicate NOR configs
  configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
  configs: ls2080aqds: Enable QSPI flash support
  dm: dts: ls2080aqds: Add QSPI dts node
  armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot
  configs: ls2080a: Increase load image len in NAND boot
  ls2080aqds_nand_defconfig: Enable QSPI & its dependence
  armv8: ls2080aqds: Enable QSPI boot support
	Changed in v2:
	 merged the patch:
	 0009-armv8-ls2080aqds-Enable-QSPI-boot-support.patch
	 0010-ls2080aqds-Enable-support-for-boot-from-QSPI.patch
	 0012-LS2080QDS-QSPI-boot-fix-issues.patch
	 in this patch.
  board/ls2080qds: add the procedure to deply QSPI image.
  	New add in v2.
  freescale: cmd: qixis: tidy up the duplicated code

 arch/arm/dts/fsl-ls2080a-qds.dts                   | 14 +++++++
 arch/arm/dts/fsl-ls2080a.dtsi                      | 10 +++++
 arch/arm/include/asm/arch-fsl-layerscape/cpu.h     |  4 ++
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |  3 ++
 board/freescale/common/qixis.c                     | 12 ++----
 board/freescale/ls2080aqds/README                  | 35 ++++++++++++++++++
 board/freescale/ls2080aqds/ls2080aqds.c            | 16 ++++++++
 common/board_f.c                                   |  6 +--
 configs/ls2080aqds_nand_defconfig                  |  9 +++++
 configs/ls2080aqds_qspi_defconfig                  | 10 +++++
 include/configs/ls2080a_common.h                   | 11 ++----
 include/configs/ls2080a_simu.h                     |  7 ++++
 include/configs/ls2080aqds.h                       | 43 +++++++++++++++++++++-
 13 files changed, 159 insertions(+), 21 deletions(-)
 create mode 100644 configs/ls2080aqds_qspi_defconfig

-- 
2.1.0.27.g96db324