[U-Boot] [PATCH] sunxi: Fix 2nd usb controller on sun4i/sun7i no longer working

[Hans de Goede]

The 2nd usb controller on sun4i/sun7i has its base address 0x8000
bytes from the 1st one, rather then 0x1000. Also the ahb clk gates
are interleaved with the ohci clk-gates introducing a hole between
the clks for usb1 and usb2.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/usb/host/ehci-sunxi.c | 13 +++++++++++--
 drivers/usb/host/ohci-sunxi.c | 15 ++++++++++++---
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index cf3dcc4..677a5d3 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -17,6 +17,14 @@
 #include <dm.h>
 #include "ehci.h"
 
+#ifdef CONFIG_SUNXI_GEN_SUN4I
+#define BASE_DIST		0x8000
+#define AHB_CLK_DIST		2
+#else
+#define BASE_DIST		0x1000
+#define AHB_CLK_DIST		1
+#endif
+
 struct ehci_sunxi_priv {
 	struct ehci_ctrl ehci;
 	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
@@ -39,8 +47,9 @@ static int ehci_usb_probe(struct udevice *dev)
 #ifdef CONFIG_MACH_SUN8I_H3
 	priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
 #endif
-	priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / 0x1000 + 1;
-	priv->ahb_gate_mask <<= priv->phy_index - 1;
+	priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / BASE_DIST;
+	priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
+	priv->phy_index++; /* Non otg phys start at 1 */
 
 	setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
 #ifdef CONFIG_SUNXI_GEN_SUN6I
diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
index 1b1f651..d4fb95a 100644
--- a/drivers/usb/host/ohci-sunxi.c
+++ b/drivers/usb/host/ohci-sunxi.c
@@ -17,6 +17,14 @@
 #include <usb.h>
 #include "ohci.h"
 
+#ifdef CONFIG_SUNXI_GEN_SUN4I
+#define BASE_DIST		0x8000
+#define AHB_CLK_DIST		2
+#else
+#define BASE_DIST		0x1000
+#define AHB_CLK_DIST		1
+#endif
+
 struct ohci_sunxi_priv {
 	ohci_t ohci;
 	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
@@ -42,9 +50,10 @@ static int ohci_usb_probe(struct udevice *dev)
 	priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
 #endif
 	priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
-	priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / 0x1000 + 1;
-	priv->ahb_gate_mask <<= priv->phy_index - 1;
-	priv->usb_gate_mask <<= priv->phy_index - 1;
+	priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
+	priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
+	priv->usb_gate_mask <<= priv->phy_index;
+	priv->phy_index++; /* Non otg phys start at 1 */
 
 	setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
 	setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
-- 
2.7.3