[U-Boot] Anyone else having issues with "fastboot flash" - because of this change?

[Steve Rae]

... updated the subject line, was:
Re: [U-Boot][PATCH v3 1/3] fastboot: OUT transaction length must be 
aligned to wMaxPacketSize


On 15-02-24 02:28 AM, Lukasz Majewski wrote:
> Hi Dileep,
>
>> OUT transactions must be aligned to wMaxPacketSize for each transfer,
>> or else transfer will not complete successfully. This patch modifies
>> rx_bytes_expected to return a transfer length that is aligned to
>> wMaxPacketSize.
>>
>> Note that the value of wMaxPacketSize and ep->maxpacket may not be
>> the same value, and it is the value of wMaxPacketSize that should be
>> used for alignment. wMaxPacketSize is passed depending on the speed of
>> connection.
>>
>> Signed-off-by: Dileep Katta <dileep.katta at linaro.org>
>> ---
>> Changes in v2:
>> 	- Corrected source of wMaxPacketSize
>> Changes in v3:
>> 	- Corrected the logic to accomodate both HS and FS speeds
>>
>>   drivers/usb/gadget/f_fastboot.c | 27 ++++++++++++++++++++++-----
>>   1 file changed, 22 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/f_fastboot.c
>> b/drivers/usb/gadget/f_fastboot.c index a8d8205..2793590 100644
>> --- a/drivers/usb/gadget/f_fastboot.c
>> +++ b/drivers/usb/gadget/f_fastboot.c
>> @@ -55,6 +55,7 @@ static inline struct f_fastboot
>> *func_to_fastboot(struct usb_function *f) static struct f_fastboot
>> *fastboot_func; static unsigned int download_size;
>>   static unsigned int download_bytes;
>> +static bool is_high_speed;
>>
>>   static struct usb_endpoint_descriptor fs_ep_in = {
>>   	.bLength            = USB_DT_ENDPOINT_SIZE,
>> @@ -219,10 +220,13 @@ static int fastboot_set_alt(struct usb_function
>> *f, __func__, f->name, interface, alt);
>>
>>   	/* make sure we don't enable the ep twice */
>> -	if (gadget->speed == USB_SPEED_HIGH)
>> +	if (gadget->speed == USB_SPEED_HIGH) {
>>   		ret = usb_ep_enable(f_fb->out_ep, &hs_ep_out);
>> -	else
>> +		is_high_speed = true;
>> +	} else {
>>   		ret = usb_ep_enable(f_fb->out_ep, &fs_ep_out);
>> +		is_high_speed = false;
>> +	}
>>   	if (ret) {
>>   		puts("failed to enable out ep\n");
>>   		return ret;
>> @@ -370,13 +374,20 @@ static void cb_getvar(struct usb_ep *ep, struct
>> usb_request *req) fastboot_tx_write_str(response);
>>   }
>>
>> -static unsigned int rx_bytes_expected(void)
>> +static unsigned int rx_bytes_expected(unsigned int maxpacket)
>>   {
>>   	int rx_remain = download_size - download_bytes;
>> +	int rem = 0;
>>   	if (rx_remain < 0)
>>   		return 0;
>>   	if (rx_remain > EP_BUFFER_SIZE)
>>   		return EP_BUFFER_SIZE;
>> +	if (rx_remain < maxpacket) {
>> +		rx_remain = maxpacket;
>> +	} else if (rx_remain % maxpacket != 0) {
>> +		rem = rx_remain % maxpacket;
>> +		rx_remain = rx_remain + (maxpacket - rem);
>> +	}

Is anyone else having problems with this code???
I need to remove these six (newly added) lines in order to get my boards 
to work -- otherwise, they just "hang" druing the download phase of 
"fastboot flash"....

Thanks in advance, Steve

>>   	return rx_remain;
>>   }
>>
>> @@ -388,6 +399,7 @@ static void rx_handler_dl_image(struct usb_ep
>> *ep, struct usb_request *req) const unsigned char *buffer = req->buf;
>>   	unsigned int buffer_size = req->actual;
>>   	unsigned int pre_dot_num, now_dot_num;
>> +	unsigned int max;
>>
>>   	if (req->status != 0) {
>>   		printf("Bad status: %d\n", req->status);
>> @@ -425,7 +437,9 @@ static void rx_handler_dl_image(struct usb_ep
>> *ep, struct usb_request *req)
>>   		printf("\ndownloading of %d bytes finished\n",
>> download_bytes); } else {
>> -		req->length = rx_bytes_expected();
>> +		max = is_high_speed ? hs_ep_out.wMaxPacketSize :
>> +				fs_ep_out.wMaxPacketSize;
>> +		req->length = rx_bytes_expected(max);
>>   		if (req->length < ep->maxpacket)
>>   			req->length = ep->maxpacket;
>>   	}
>> @@ -438,6 +452,7 @@ static void cb_download(struct usb_ep *ep, struct
>> usb_request *req) {
>>   	char *cmd = req->buf;
>>   	char response[RESPONSE_LEN];
>> +	unsigned int max;
>>
>>   	strsep(&cmd, ":");
>>   	download_size = simple_strtoul(cmd, NULL, 16);
>> @@ -453,7 +468,9 @@ static void cb_download(struct usb_ep *ep, struct
>> usb_request *req) } else {
>>   		sprintf(response, "DATA%08x", download_size);
>>   		req->complete = rx_handler_dl_image;
>> -		req->length = rx_bytes_expected();
>> +		max = is_high_speed ? hs_ep_out.wMaxPacketSize :
>> +			fs_ep_out.wMaxPacketSize;
>> +		req->length = rx_bytes_expected(max);
>>   		if (req->length < ep->maxpacket)
>>   			req->length = ep->maxpacket;
>>   	}
>
> Applied to u-boot-dfu branch.
>
> Thanks for the patch!
>